scholarly journals A modified sensitive palladium-copper oxide and multiwalled carbon nanotubes electrochemical sensor for detection of ametridione pesticide

2021 ◽  
Vol 13 (3) ◽  
pp. 798-806
Author(s):  
V. Bebi ◽  
P. Reddy Prasad ◽  
K. Sudheer ◽  
P. Sandhya ◽  
C. Nageswara Reddy ◽  
...  
Keyword(s):  
Electrochemical Sensor ◽  
Water Samples ◽  
Supporting Electrolyte ◽  
Buffer Solution ◽  
Multiwalled Carbon ◽  
Limit Of Quantification ◽  
Run Off ◽  
Electrochemical Nanosensor ◽  
Electron Reduction ◽  
Morphology Characteristics

Glassy carbon electrode modified sensitive Pd-CuO/MWCNTs electrochemical nanosensor was used for detection of ametridione pesticide in water samples. The morphology characteristics of Pd-CuO/MWCNTs are examined by scanning electron microscopy and EDX. The ametridione pesticide under voltammetric investigation involves irreversible, 4e? electron reduction based on the protonation of the two carbonyl groups (>C=O). The voltammetric method was applied for the detection of ametridione in BR buffer solution at pH 5.0 as a supporting electrolyte. The detection limit, limit of quantification and concentration ranges of the proposed method were 0.0796 ?g?mL?1 (signal/noise=3), 0.5560 ?g?mL?1 and 0.1 to 10.0 ?g?mL?1, respectively. The electrochemical sensor was successfully applied for the detection of ametridione in tap, agricultural run-off and river water samples showing >98% mean recoveries.    

scholarly journals Modified Screen-Printed Electrode for Determination of Imidacloprid in Water Samples: A Preliminary Study

2019 ◽  
Vol 1 (2) ◽  
pp. 41-50
Author(s):  
Azrilawani Ahmad ◽  
Nur Anis Zafirah Zainordin ◽  
Nur Amira Jaafar
Keyword(s):  
Water Samples ◽  
Limit Of Detection ◽  
Supporting Electrolyte ◽  
Reduction Peak ◽  
Self Assembled Monolayer ◽  
Limit Of Quantification ◽  
Peak Current ◽  
Preliminary Study ◽  
Screen Printed

A preliminary assessment of a simple and rapid electrochemical method was carried out to analyse imidacloprid (IMI) in water samples using cyclic voltammetry (CV) based on modified screen-printed gold electrode (SPGE). Self-assembled monolayer (SAM) was optimized using 11-mercaptoundecanoic acid (11-MUA) with several parameters such as scan rates, type of supporting electrolyte, and pH of the supporting electrolyte. The modified SPGE showed high suppressed current against the potential due to the formation of a monolayer on the electrode surface. Surface morphology of the electrode was analysed using Scanning Electron Microscopy (SEM) confirming that 11-MUA was present on the modified SPGE. The water samples were collected from GM Peladang, Kuala Terengganu and two locations at Universiti Malaysia Terengganu. Method detection limit was expressed as limit of detection (LOD) and limit of quantification (LOQ) for modified SPGE which were calculated at 3.784 and 12.613 mg/L in water samples, respectively. This study showed that the reduction peak current observed on the modified electrode was lower compared with oxidation peak current. Hence, gold is unsuitable for IMI detection.

A Sensitive and Selective Electrochemical Sensor for Sulfadimethoxine Based on Electropolymerized Molecularly Imprinted Poly (o-aminophenol) Film

2020 ◽  
Vol 16 (4) ◽  
pp. 413-420 ◽  
Author(s):  
Youyuan Peng ◽  
Qiaolan Ji
Keyword(s):  
Electrochemical Sensor ◽  
Polymer Film ◽  
Water Samples ◽  
Differential Pulse ◽  
Imprinted Polymer ◽  
Molecularly Imprinted ◽  
Long Term Stability ◽  
Multi Walled Carbon Nanotubes ◽  
Aquaculture Water ◽  
Walled Carbon Nanotubes

Background: As a broad-spectrum antibiotic of the sulfonamide family, Sulfadimethoxine (SDM) has been widely utilized for therapeutic and growth-promoting purposes in animals. However, the use of SDM can cause residual problems. Even a low concentration of SDM in the aquatic system can exert toxic effects on target organisms and green algae. Therefore, the quantitation of SDM residues has become an important task. Methods: The present work describes the development of a sensitive and selective electrochemical sensor for sulfadimethoxine based on molecularly imprinted poly(o-aminophenol) film. The molecular imprinted polymer film was fabricated by electropolymerizing o-aminophenol in the presence of SDM after depositing carboxylfunctionalized multi-walled carbon nanotubes onto a glassy carbon electrode surface. SDM can be quickly removed by electrochemical methods. The imprinted polymer film was characterized by cyclic voltammetry, differential pulse voltammetry and scanning electron microscopy. Results: Under the selected optimal conditions, the molecularly imprinted sensor shows a linear range from 1.0 × 10-7 to 2.0 × 10-5 mol L-1 for SDM, with a detection limit of 4.0 × 10-8 mol L-1. The sensor was applied to the determination of SDM in aquaculture water samples successfully, with the recoveries ranging from 95% to 106%. Conclusion: The proposed sensor exhibited a high degree of selectivity for SDM in comparison to other structurally similar molecules, along with long-term stability, good reproducibility and excellent regeneration capacity. The sensor may offer a feasible strategy for the analysis of SDM in aquaculture water samples.

scholarly journals Perchlorate Levels in Polish Water Samples of Various Origin

Separations ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 37
Author(s):  
Przemysław Niziński ◽  
Patrycja Wiśniewska ◽  
Joanna Kończyk ◽  
Rajmund Michalski
Keyword(s):  
Drinking Water ◽  
Water Samples ◽  
Limit Of Detection ◽  
Primary Objective ◽  
Swimming Pool ◽  
Limit Of Quantification ◽  
Reliable Determination ◽  
Pool Water ◽  
Drinking Waters ◽  
Swimming Pool Water

Perchlorate ion (ClO4−) is known as a potent endocrine disruptor and exposure to this compound can result in serious health issues. It has been found in drinking water, swimming pools, and surface water in many countries, however, its occurrence in the environment is still poorly understood. The information on perchlorate contamination of Polish waters is very limited. The primary objective of this study was to assess ClO4− content in bottled, tap, river, and swimming pool water samples from different regions of Poland and provide some data on the presence of perchlorate. We have examined samples of bottled, river, municipal, and swimming pool water using the IC–CD (ion chromatography–conductivity detection) method. Limit of detection and limit of quantification were 0.43 µg/L and 1.42 µg/L, respectively, and they were both above the current health advisory levels in drinking water. The concentration of perchlorate were found to be 3.12 µg/L in one river water sample and from 6.38 to 8.14 µg/L in swimming pool water samples. Importantly, the level of perchlorate was below the limit of detection (LOD) in all bottled water samples. The results have shown that the determined perchlorate contamination in Polish drinking waters seems to be small, nevertheless, further studies are required on surface and river samples. The inexpensive, fast, and sensitive IC–CD method used in this study allowed for a reliable determination of perchlorate in the analyzed samples. To the best of our knowledge, there are no other studies seeking to assess the perchlorate content in Polish waters.

scholarly journals Surface-Enhanced Oxidation and Determination of Isothipendyl Hydrochloride at an Electrochemical Sensing Film Constructed by Multiwalled Carbon Nanotubes

2012 ◽  
Vol 2012 ◽  
pp. 1-6
Author(s):  
S. N. Prashanth ◽  
Shankara S. Kalanur ◽  
Nagappa L. Teradal ◽  
J. Seetharamappa
Keyword(s):  
Limit Of Detection ◽  
Biological Fluids ◽  
Differential Pulse ◽  
Electrochemical Sensing ◽  
Good Precision ◽  
Multiwalled Carbon ◽  
Limit Of Quantification ◽  
Surface Enhanced ◽  
Ph Range

The electrochemical behavior of isothipendyl hydrochloride (IPH) was investigated at bare and multiwalled-carbon-nanotube modified glassy carbon electrode (MWCNT-GCE). IPH (55 μM) showed two oxidation peaks in Britton-Robinson (BR) buffer of pH 7.0. The oxidation process of IPH was observed to be irreversible over the pH range of 2.5–9.0. The influence of pH, scan rate, and concentration of the drug on anodic peak was studied. A differential pulse voltammetric method with good precision and accuracy was developed for the determination of IPH in pure and biological fluids. The peak current was found to be linearly dependent on the concentration of IPH in the range of 1.25–55 μM. The values of limit of detection and limit of quantification were noticed to be 0.284 and 0.949 μM, respectively.

Antimony and arsenic distribution and impacts at a derelict antimony mine in Scotland 

2021 ◽  
Author(s):  
Lenka Mbadugha ◽  
Duncan Cowper ◽  
Sapar Dossanov ◽  
Graeme Paton
Keyword(s):  
Water Samples ◽  
Anthropogenic Activities ◽  
Environmental Standards ◽  
Arsenic Distribution ◽  
Run Off ◽  
Ore Processing ◽  
Regulatory Limits ◽  
Derelict Mine ◽  
Historic Mining ◽  
The Uk

<p>Mining activities are acknowledged to introduce contaminants into localised environments and cause wider spread diffuse pollution. The concentration, distribution and fate of arsenic (As) and antimony (Sb) were studied at the former metalliferous Louisa Mine at Glendinning, Scotland. The associated deposit is one of very few able to produce Sb in the UK and was mined for three brief periods between 1793 and 1922.  </p><p>The remnants of the mine consist of the ore processing area and two spoils. Soils withing these zones as well as around the mine were sampled and complemented by water samples from the adjacent stream, the Glennshanna Burn. All samples were subsequently analysed to map the distribution of contamination and identify pollution sources. The maximum concentrations of As and Sb, 15490 and 1504.2 mg kg<sup>−1</sup> respectively, were determined in soils associated with the ore processing area and spoil heaps. Anthropogenic activities also redistributed As and Sb within these mine zones and altered their relative ratios. The fractions of dissolved As and Sb in soils were < 1 and < 5% of total soil content, respectively, confirming findings of previous studies that As and Sb are relatively immobile. Yet, the concentrations of As and Sb released by soils exceeded regulatory limits.</p><p>Concentrations of As and Sb in surface water in the immediate vicinity of the mine were impacted by a gully discharge, but rapidly diluted. While the concentrations affected by the run-off waters did not exceed EU environmental standards for freshwater, the concentrations of As and Sb sharply increased to 11.43 ± 3.43 and 9.28 ± 0.59 μg l<sup>−1</sup>, respectively, approximately 100 m downstream of the mine site. The unaltered As to Sb ratios in water samples suggested a geogenic source of contamination.</p><p>While there is a justifiable concern about the soil pollution caused by the historic mining in the studied area, the Glenshanna Burn is affected more by indigenous geochemical processes than the derelict mine.</p>

An electrochemical paracetamol sensor based on layer-by-layer covalent attachment of MWCNTs and a G4.0 PAMAM modified GCE

2016 ◽  
Vol 8 (10) ◽  
pp. 2218-2225 ◽  
Author(s):  
Yanjun Zhang ◽  
Xiuhui Liu ◽  
Lin Li ◽  
Zhipan Guo ◽  
Zhonghua Xue ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Electrochemical Sensor ◽  
Multiwalled Carbon Nanotubes ◽  
Covalent Attachment ◽  
Fourth Generation ◽  
Layer By Layer ◽  
Multiwalled Carbon

An electrochemical sensor for the detection of paracetamol (PAT) was reported employing multiwalled carbon nanotubes (MWCNTs) and the fourth generation poly(amidoamine) dendrimers (G4.0 PAMAM).

scholarly journals Ionic Liquid-Multiwalled Carbon Nanotubes Nanocomposite Based All Solid State Ion-Selective Electrode for the Determination of Copper in Water Samples

Water ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 2869
Author(s):  
Cecylia Wardak ◽  
Karolina Pietrzak ◽  
Małgorzata Grabarczyk
Keyword(s):  
Carbon Nanotubes ◽  
Ionic Liquid ◽  
Solid State ◽  
Multiwalled Carbon Nanotubes ◽  
Water Samples ◽  
Limit Of Detection ◽  
Ion Selective Electrode ◽  
Selective Electrode ◽  
Multiwalled Carbon ◽  
Copper Determination

A new copper sensitive all solid-state ion-selective electrode was prepared using multiwalled carbon nanotubes-ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate) nanocomposite as an additional membrane component. The effect of nanocomposite content in the membrane on the electrode parameters was investigated. The study compares, among others, detection limits, sensitivity, and the linearity ranges of calibration curves. Content 6 wt.% was considered optimal for obtaining an electrode with a Nernstian response of 29.8 mV/decade. An electrode with an optimal nanocomposite content in the membrane showed a lower limit of detection, a wider linear range and pH range, as well as better selectivity and potential stability compared to the unmodified electrode. It was successfully applied for copper determination in real water samples.

Sign in / Sign up

Export Citation Format

Share Document