Magnetometric Systems and Precise Magnetic Measurements for Biomedical Applications

Iron oxide nanoparticles have received remarkable attention in different applications. For biomedical applications, they need to possess suitable core size, acceptable hydrodynamic diameter, high saturation magnetization, and reduced toxicity. Our aim is to control the synthesis parameters of nanostructured iron oxides in order to obtain magnetite nanoparticles in a single step, in environmentally friendly conditions, under inert gas atmosphere. The physical–chemical, structural, magnetic, and biocompatible properties of magnetite prepared by hydrothermal method in different temperature and pressure conditions have been explored. Magnetite formation has been proved by Fourier-transform infrared spectroscopy and X-ray diffraction characterization. It has been found that crystallite size increases with pressure and temperature increase, while hydrodynamic diameter is influenced by temperature. Magnetic measurements indicated that the magnetic core of particles synthesized at high temperature is larger, in accordance with the crystallite size analysis. Particles synthesized at 100 °C have nearly identical magnetic moments, at 20 × 103 μB, corresponding to magnetic cores of 10–11 nm, while the particles synthesized at 200 °C show slightly higher magnetic moments (25 × 103 μB) and larger magnetic cores (13 nm). Viability test results revealed that the particles show only minor intrinsic toxicity, meaning that these particles could be suited for biomedical applications.

Download Full-text

Specific Loss Power of Co/Li/Zn-Mixed Ferrite Powders for Magnetic Hyperthermia

Sensors ◽

10.3390/s20072151 ◽

2020 ◽

Vol 20 (7) ◽

pp. 2151

Author(s):

Gabriele Barrera ◽

Marco Coisson ◽

Federica Celegato ◽

Luca Martino ◽

Priyanka Tiwari ◽

...

Keyword(s):

Magnetic Field ◽

Magnetic Properties ◽

Cation Distribution ◽

Biomedical Applications ◽

Magnetic Measurements ◽

Magnetic Hyperthermia ◽

Alternating Magnetic Field ◽

Specific Loss ◽

Specific Loss Power ◽

Auto Combustion

An important research effort on the design of the magnetic particles is increasingly required to optimize the heat generation in biomedical applications, such as magnetic hyperthermia and heat-assisted drug release, considering the severe restrictions for the human body’s exposure to an alternating magnetic field. Magnetic nanoparticles, considered in a broad sense as passive sensors, show the ability to detect an alternating magnetic field and to transduce it into a localized increase of temperature. In this context, the high biocompatibility, easy synthesis procedure and easily tunable magnetic properties of ferrite powders make them ideal candidates. In particular, the tailoring of their chemical composition and cation distribution allows the control of their magnetic properties, tuning them towards the strict demands of these heat-assisted biomedical applications. In this work, Co0.76Zn0.24Fe2O4, Li0.375Zn0.25Fe2.375O4 and ZnFe2O4 mixed-structure ferrite powders were synthesized in a ‘dry gel’ form by a sol-gel auto-combustion method. Their microstructural properties and cation distribution were obtained by X-ray diffraction characterization. Static and dynamic magnetic measurements were performed revealing the connection between the cation distribution and magnetic behavior. Particular attention was focused on the effect of Co2+ and Li+ ions on the magnetic properties at a magnetic field amplitude and the frequency values according to the practical demands of heat-assisted biomedical applications. In this context, the specific loss power (SLP) values were evaluated by ac-hysteresis losses and thermometric measurements at selected values of the dynamic magnetic fields.

Download Full-text

One-Step Preparation of Nickel Nanoparticle-Based Magnetic Poly(Vinyl Alcohol) Gels

Coatings ◽

10.3390/coatings9110744 ◽

2019 ◽

Vol 9 (11) ◽

pp. 744 ◽

Cited By ~ 1

Author(s):

Jun Li ◽

Kwang-Pill Lee ◽

Anantha Iyengar Gopalan

Keyword(s):

Vinyl Alcohol ◽

Biomedical Applications ◽

Magnetic Measurements ◽

Poly Vinyl Alcohol ◽

Stimuli Responsive ◽

X Ray Diffraction ◽

Experimental Conditions ◽

X Ray ◽

One Step ◽

Stimuli Responsive Polymer

Magnetic nanoparticles (MNPs) are of great interest due to their unique properties, especially in biomedical applications. MNPs can be incorporated into other matrixes to prepare new functional nanomaterials. In this work, we described a facile, one-step strategy for the synthesis of magnetic poly(vinyl alcohol) (mPVA) gels. In the synthesis, nickel nanoparticles and cross-linked mPVA gels were simultaneously formed. Ni nanoparticles (NPs) were also incorporated into a stimuli-responsive polymer to result in multiresponsive gels. The size of and distribution of the Ni particles within the mPVA gels were controlled by experimental conditions. The mPVA gels were characterized by field emission scanning electron microscope, X-ray diffraction, magnetic measurements, and thermogravimetric analysis. The new mPVA gels are expected to have applications in drug delivery and biotechnology.

Download Full-text

Thermal Decomposition Synthesis and Assessment of Effects on Blood Cells and In Vivo Damages of Cobalt Ferrite Nanoparticles

Journal of Nano Research ◽

10.4028/www.scientific.net/jnanor.28.131 ◽

2014 ◽

Vol 28 ◽

pp. 131-140 ◽

Cited By ~ 7

Author(s):

Luiz F. Cotica ◽

Valdirlei F. Freitas ◽

Daniel M. Silva ◽

Karina Honjoya ◽

Karen Honjoya ◽

...

Keyword(s):

Biomedical Applications ◽

Cobalt Ferrite ◽

Magnetic Measurements ◽

Drug Carrier ◽

Current Approach ◽

Ferrite Nanoparticles ◽

One Pot ◽

Synthesis Routes ◽

Model Drug

In the search to reduce the side effects, toxicity and assuring the desired effectiveness of the drugs, many efforts has been made to improve specific drugs’ delivery characteristics. Several carrier nanoparticles have been used to assist the drugs incorporation, absorption and transport through the bloodstream. However, most chemical synthesis routes are multistep and time-consuming treatments and, also, many carrier nanoparticles have toxic effects. In this work, we report a simple one-pot approach for the synthesis of CoFe2O4 nanoparticles (20 to 100 nm). The magnetic measurements revealed nanoparticles with a magnetic saturation nearly one third of that for bulk CoFe2O4. In vitro assays showed no hemolytic potential and negligible toxicity. By in vivo experiments using adult male mice we found no potential risk alterations by the nanoparticles administration. Therefore, the CoFe2O4 nanoparticles, synthesized by the current approach, can be a model drug-carrier, which makes them useful for the biomedical applications.

Download Full-text

Magnetic measurement methods to probe nanoparticle–matrix interactions

Physical Sciences Reviews ◽

10.1515/psr-2019-0112 ◽

2021 ◽

Vol 0 (0) ◽

Author(s):

Maik Liebl ◽

Dietmar Eberbeck ◽

Annelies Coene ◽

Jonathan Leliaert ◽

Philine Jauch ◽

...

Keyword(s):

Biomedical Applications ◽

Tumor Tissue ◽

Magnetic Measurements ◽

Magnetic Measurement ◽

Therapy Monitoring ◽

Measurement Methods ◽

The Body ◽

Magnetic Microsphere ◽

Matrix Interactions ◽

The Impact

Abstract Magnetic nanoparticles (MNPs) are key elements in several biomedical applications, e.g., in cancer therapy. Here, the MNPs are remotely manipulated by magnetic fields from outside the body to deliver drugs or generate heat in tumor tissue. The efficiency and success of these approaches strongly depend on the spatial distribution and quantity of MNPs inside a body and interactions of the particles with the biological matrix. These include dynamic processes of the MNPs in the organism such as binding kinetics, cellular uptake, passage through cell barriers, heat induction and flow. While magnetic measurement methods have been applied so far to resolve the location and quantity of MNPs for therapy monitoring, these methods can be advanced to additionally access these particle–matrix interactions. By this, the MNPs can further be utilized as probes for the physical properties of their molecular environment. In this review, we first investigate the impact of nanoparticle–matrix interactions on magnetic measurements in selected experiments. With these results, we then advanced the imaging modalities magnetorelaxometry imaging and magnetic microsphere tracking to spatially resolve particle–matrix interactions.

Download Full-text

Applications of Scanning Microscopy in Biomedical Research

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100101517 ◽

1968 ◽

Vol 26 ◽

pp. 354-355

Author(s):

T. L. Hayes

Keyword(s):

Information Content ◽

Biomedical Research ◽

Biomedical Applications ◽

Three Dimensional ◽

Dental Enamel ◽

Resolving Power ◽

Whole Mount ◽

Two Parameters ◽

Content Information ◽

Sectioned Tissue

Biomedical applications of the scanning electron microscope (SEM) have increased in number quite rapidly over the last several years. Studies have been made of cells, whole mount tissue, sectioned tissue, particles, human chromosomes, microorganisms, dental enamel and skeletal material. Many of the advantages of using this instrument for such investigations come from its ability to produce images that are high in information content. Information about the chemical make-up of the specimen, its electrical properties and its three dimensional architecture all may be represented in such images. Since the biological system is distinctive in its chemistry and often spatially scaled to the resolving power of the SEM, these images are particularly useful in biomedical research.In any form of microscopy there are two parameters that together determine the usefulness of the image. One parameter is the size of the volume being studied or resolving power of the instrument and the other is the amount of information about this volume that is displayed in the image. Both parameters are important in describing the performance of a microscope. The light microscope image, for example, is rich in information content (chemical, spatial, living specimen, etc.) but is very limited in resolving power.

Download Full-text

How SIMS microscopy can be used in medicine

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100132649 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1602-1603

Author(s):

Philippe Fragu

Keyword(s):

Mass Spectrometry ◽

Biomedical Applications ◽

Secondary Ion Mass Spectrometry ◽

Chemical Elements ◽

Biological Applications ◽

The Past ◽

Potential Source ◽

Secondary Ion ◽

Chemical Integrity ◽

Scientific Endeavour

The identification, localization and quantification of intracellular chemical elements is an area of scientific endeavour which has not ceased to develop over the past 30 years. Secondary Ion Mass Spectrometry (SIMS) microscopy is widely used for elemental localization problems in geochemistry, metallurgy and electronics. Although the first commercial instruments were available in 1968, biological applications have been gradual as investigators have systematically examined the potential source of artefacts inherent in the method and sought to develop strategies for the analysis of soft biological material with a lateral resolution equivalent to that of the light microscope. In 1992, the prospects offered by this technique are even more encouraging as prototypes of new ion probes appear capable of achieving the ultimate goal, namely the quantitative analysis of micron and submicron regions. The purpose of this review is to underline the requirements for biomedical applications of SIMS microscopy.Sample preparation methodology should preserve both the structural and the chemical integrity of the tissue.

Download Full-text

Biomedical applications: Pitfalls in the practice

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100169626 ◽

1994 ◽

Vol 52 ◽

pp. 378-379

Author(s):

J. D. Shelburne ◽

Peter Ingram ◽

Victor L. Roggli ◽

Ann LeFurgey

Keyword(s):

Operating Room ◽

Liquid Nitrogen ◽

Lung Tissue ◽

Biomedical Applications ◽

Microprobe Analysis ◽

Tissue Sample ◽

Cellular Level ◽

Tissue Samples ◽

Asbestos Fibers

At present most medical microprobe analysis is conducted on insoluble particulates such as asbestos fibers in lung tissue. Cryotechniques are not necessary for this type of specimen. Insoluble particulates can be processed conventionally. Nevertheless, it is important to emphasize that conventional processing is unacceptable for specimens in which electrolyte distributions in tissues are sought. It is necessary to flash-freeze in order to preserve the integrity of electrolyte distributions at the subcellular and cellular level. Ideally, biopsies should be flash-frozen in the operating room rather than being frozen several minutes later in a histology laboratory. Electrolytes will move during such a long delay. While flammable cryogens such as propane obviously cannot be used in an operating room, liquid nitrogen-cooled slam-freezing devices or guns may be permitted, and are the best way to achieve an artifact-free, accurate tissue sample which truly reflects the in vivo state. Unfortunately, the importance of cryofixation is often not understood. Investigators bring tissue samples fixed in glutaraldehyde to a microprobe laboratory with a request for microprobe analysis for electrolytes.

Download Full-text

Biological and biomedical applications of collagenous biomaterials

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100161849 ◽

1990 ◽

Vol 48 (3) ◽

pp. 856-857

Author(s):

Yasushi P. Kato ◽

Michael G. Dunn ◽

Frederick H. Silver ◽

Arthur J. Wasserman

Keyword(s):

Biomedical Applications ◽

Soft Tissues ◽

Collagen Fibers ◽

Bone Collagen ◽

Cover Slip ◽

Fibroblast Migration ◽

Cellular Expression ◽

Defect Repair

Collagenous biomaterials have been used for growing cells in vitro as well as for augmentation and replacement of hard and soft tissues. The substratum used for culturing cells is implicated in the modulation of phenotypic cellular expression, cellular orientation and adhesion. Collagen may have a strong influence on these cellular parameters when used as a substrate in vitro. Clinically, collagen has many applications to wound healing including, skin and bone substitution, tendon, ligament, and nerve replacement. In this report we demonstrate two uses of collagen. First as a fiber to support fibroblast growth in vitro, and second as a demineralized bone/collagen sponge for radial bone defect repair in vivo.For the in vitro study, collagen fibers were prepared as described previously. Primary rat tendon fibroblasts (1° RTF) were isolated and cultured for 5 days on 1 X 15 mm sterile cover slips. Six to seven collagen fibers, were glued parallel to each other onto a circular cover slip (D=18mm) and the 1 X 15mm cover slip populated with 1° RTF was placed at the center perpendicular to the collagen fibers. Fibroblast migration from the 1 x 15mm cover slip onto and along the collagen fibers was measured daily using a phase contrast microscope (Olympus CK-2) with a calibrated eyepiece. Migratory rates for fibroblasts were determined from 36 fibers over 4 days.

Download Full-text

Multifunctional metal–organic framework heterostructures for enhanced cancer therapy

Chemical Society Reviews ◽

10.1039/d0cs00178c ◽

2021 ◽

Author(s):

Jintong Liu ◽

Jing Huang ◽

Lei Zhang ◽

Jianping Lei

Keyword(s):

Cancer Therapy ◽

General Principle ◽

Biomedical Applications ◽

Metal Organic Framework ◽

Metal Organic ◽

Functional Modulation ◽

Organic Framework

We review the general principle of the design and functional modulation of nanoscaled MOF heterostructures, and biomedical applications in enhanced therapy.

Download Full-text