scholarly journals 3D Progressive Failure Modeling of Drop-Weight Impact on Composite Laminates

2018 ◽  
Author(s):  
DC Pham
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Progressive Failure ◽  
Damage Model ◽  
Matrix Cracking ◽  
Structural Level ◽  
Velocity Impact ◽  
Drop Weight ◽  
Weight Impact ◽  
The Impact

Composite laminates are susceptible to out-of-plane impact loads due to the lack of reinforcement in the through-thickness direction. Unlike the localized damage induced by a high velocity impact where the incident energy is dissipated near a contact area, low velocity impact damage involves multiple failure mechanisms such as matrix cracking, fiber breakage, and widespread interface delaminations. Depending on the extent of damage, significant reduction in the load-bearing capability of the structure has been observed. The prediction of composite impact damage resistance by a reliable progressive damage analysis tool is essential to reduce intensive and expensive certification tests at structural level. In this work, an enhanced explicit 3D damage model is implemented via VUMAT in Abaqus to perform a drop-weight impact simulation of a [454/04/-454/904]s Hexply AS4/8552 composite laminate. The impact-induced damage and its extent are captured by a 3D Continuum Damage Model (CDM) coupled with an energy driven failure mechanism. The developed module provides a unified solution process for the impact response prediction followed by the residual strength prediction under compression within an explicit solver. Two examples are selected to demonstrate the capability of the progressive failure analysis under dynamic and static loading: 1) a drop-weight test; and 2) an open-hole tension test. Numerical predictions from the developed VUMAT are compared with the test data and predictions using the open source CompDam code developed by NASA.

A damage mechanics model for low-velocity impact damage analysis of composite laminates

2017 ◽  
Vol 121 (1238) ◽  
pp. 515-532 ◽  
Author(s):  
N. Li ◽  
P.H. Chen ◽  
Q. Ye
Keyword(s):  
Composite Laminates ◽  
Damage Mechanics ◽  
Failure Modes ◽  
Impact Damage ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Fracture Plane ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

ABSTRACTA method was developed to predict numerically the damage of composite laminates with multiple plies under low-velocity impact loading. The Puck criterion for 3D stress states was adopted to model the intralaminar damage including matrix cracking and fibre breakage, and to obtain the orientation of the fracture plane due to matrix failure. According to interlaminar delamination mechanism, a new delamination criterion was proposed. The influence of transverse and through-thickness normal stress, interlaminar shear stress and damage conditions of adjacent plies on delamination was considered. In order to predict the impact-induced damage of composite laminates with more plies quickly and efficiently, an approach, which can predict the specific damage of several plies in a single solid element, was proposed by interpolation on the strains of element integration points. Moreover, the proposed model can predict specific failure modes. A good agreement between the predicted delamination shapes and sizes and the experimental results shows correctness of the developed numerical method for predicting low-velocity impact damage on composite laminates.

scholarly journals Falling Weight Impact Damage Characterisation of Flax and Flax Basalt Vinyl Ester Hybrid Composites

Polymers ◽  
2020 ◽  
Vol 12 (4) ◽  
pp. 806 ◽  
Author(s):  
Hom Nath Dhakal ◽  
Elwan Le Méner ◽  
Marc Feldner ◽  
Chulin Jiang ◽  
Zhongyi Zhang
Keyword(s):  
Vinyl Ester ◽  
Failure Modes ◽  
Hybrid Composites ◽  
Impact Damage ◽  
Matrix Cracking ◽  
Damage Mechanisms ◽  
Pull Out ◽  
Weight Impact ◽  
Falling Weight ◽  
The Impact

Understanding the damage mechanisms of composite materials requires detailed mapping of the failure behaviour using reliable techniques. This research focuses on an evaluation of the low-velocity falling weight impact damage behaviour of flax-basalt/vinyl ester (VE) hybrid composites. Incident impact energies under three different energy levels (50, 60, and 70 Joules) were employed to cause complete perforation in order to characterise different impact damage parameters, such as energy absorption characteristics, and damage modes and mechanisms. In addition, the water absorption behaviour of flax and flax basalt hybrid composites and its effects on the impact damage performance were also investigated. All the samples subjected to different incident energies were characterised using non-destructive techniques, such as scanning electron microscopy (SEM) and X-ray computed micro-tomography (πCT), to assess the damage mechanisms of studied flax/VE and flax/basalt/VE hybrid composites. The experimental results showed that the basalt hybrid system had a high impact energy and peak load compared to the flax/VE composite without hybridisation, indicating that a hybrid approach is a promising strategy for enhancing the toughness properties of natural fibre composites. The πCT and SEM images revealed that the failure modes observed for flax and flax basalt hybrid composites were a combination of matrix cracking, delamination, fibre breakage, and fibre pull out.

scholarly journals Static Residual Tensile Strength Response of GFRP Composite Laminates Subjected to Low-Velocity Impact

2020 ◽  
Vol 10 (16) ◽  
pp. 5480
Author(s):  
Jong-Il Kim ◽  
Yong-Hak Huh ◽  
Yong-Hwan Kim
Keyword(s):  
Tensile Strength ◽  
Composite Laminates ◽  
Impact Damage ◽  
Image Correlation ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Stress Concentrations ◽  
Low Velocity ◽  
Full Field ◽  
The Impact

The dependency of the static residual tensile strength for the Glass Fiber-Reinforced Plastic (GFRP) laminates after impact on the impact energy level and indent shape is investigated. In this study, two different laminates, unidirectional, [0°2]s) and TRI (tri-axial, (±45°/0°)2]s), were prepared using the vacuum infusion method, and an impact indent on the respective laminates was created at different energy levels with pyramidal and hemispherical impactors. Impact damage patterns, such as matrix cracking, delamination, debonding and fiber breakage, could be observed on the GFRP laminates by a scanning electron microscope (SEM), and it is found that those were dependent on the impactor head shape and laminate structure. Residual in-plane tensile strength of the impacted laminates was measured and the reduction of the strength is found to be dependent upon the impact damage patterns. Furthermore, in this study, stress concentrations in the vicinity of the indents were determined from full-field stress distribution obtained by three-dimensional Digital Image Correlation (3D DIC) measurement. It was found that the stress concentration was associated with the reduction of the residual strength for the GFRP laminates.

Analysis on Low Velocity Impact Damage and Compressive Residual Strength of Composite Laminates

2014 ◽  
Vol 566 ◽  
pp. 463-467
Author(s):  
Pu Xue ◽  
H.H. Chen ◽  
W. Guo
Keyword(s):  
Experimental Data ◽  
Residual Strength ◽  
Composite Laminates ◽  
Damage Mechanics ◽  
Impact Damage ◽  
Numerical Results ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Velocity Impact ◽  
The Impact

This paper studies the impact damage under low velocity impact for composite laminates based on a nonlinear progressive damage model. Damage evolution is described by the framework of the continuum damage mechanics. The real impact damage status of composite laminates has been used to analyze the residual compressive strength instead of assumptions on damage area after impact. The validity of the methodologies has been demonstrated by comparing the numerical results with the experimental data available in literature. The delamination area has an error of 11.3%. The errors of residual strength and compressive displacement are 8.9% and 15%, which indicate that the numerical results matched well with the experimental data.

Failure Analysis of CCF300/5428 Laminates under Low Velocity Impact Based on Properties of Advanced Composite Material

2013 ◽  
Vol 387 ◽  
pp. 185-188
Author(s):  
Jian Yu Zhang ◽  
Ming Li ◽  
Li Bin Zhao ◽  
Bin Jun Fei
Keyword(s):  
Failure Analysis ◽  
Composite Laminates ◽  
Damage Model ◽  
Failure Criteria ◽  
Low Velocity Impact ◽  
Material System ◽  
Low Velocity ◽  
3D Fem ◽  
Velocity Impact ◽  
The Impact

A progressive damage model (PDM) composed by 3D FEM, Hashin and Ye failure criteria and Changs degradation rules was established to deeply understand the failure of a new material system CCF300/5428 under low velocity impact. User defined subroutines were developed and embedded into the general FEA software package to carry out the failure analysis. Numerical simulations provide more information about the failure of composite laminates under low velocity impact, including initial damage status, damage propagation and final failure status. The history of the impact point displacement and various damage patterns were detailed studied.

scholarly journals Palliatives for Low Velocity Impact Damage in Composite Laminates

2017 ◽  
Vol 2017 ◽  
pp. 1-16 ◽  
Author(s):  
Mubarak Ali ◽  
S. C. Joshi ◽  
Mohamed Thariq Hameed Sultan
Keyword(s):  
Composite Laminates ◽  
Impact Damage ◽  
Laminated Composites ◽  
Low Velocity Impact ◽  
Normal Operation ◽  
Fibre Reinforcement ◽  
Low Velocity ◽  
Velocity Impact ◽  
Damage Initiation ◽  
The Impact

Fibre reinforced polymer laminated composites are susceptible to impact damage during manufacture, normal operation, maintenance, and/or other stages of their life cycle. Initiation and growth of such damage lead to dramatic loss in the structural integrity and strength of laminates. This damage is generally difficult to detect and repair. This makes it important to find a preventive solution. There has been abundance of research dealing with the impact damage evolution of composite laminates and methods to mitigate and alleviate the damage initiation and growth. This article presents a comprehensive review of different strategies dealing with development of new composite materials investigated by several research groups that can be used to mitigate the low velocity impact damage in laminated composites. Hybrid composites, composites with tough thermoplastic resins, modified matrices, surface modification of fibres, translaminar reinforcements, and interlaminar modifications such as interleaving, short fibre reinforcement, and particle based interlayer are discussed in this article. A critical evaluation of various techniques capable of enhancing impact performance of laminated composites and future directions in this research field are presented in this article.

A three-dimensional progressive damage model for drop-weight impact and compression after impact

2019 ◽  
Vol 54 (4) ◽  
pp. 449-462 ◽  
Author(s):  
Dinh Chi Pham ◽  
Jim Lua ◽  
Haotian Sun ◽  
Dianyun Zhang
Keyword(s):  
Impact Analysis ◽  
Damage Model ◽  
Three Dimensional ◽  
Matrix Cracking ◽  
Progressive Damage ◽  
Continuum Damage ◽  
Drop Weight ◽  
Compression After Impact ◽  
Weight Impact ◽  
Progressive Damage Model

In this paper, an enhanced three-dimensional continuum damage mechanics model is applied to predict the drop-weight impact response and compression after impact failure of a fiber-reinforced polymer composite specimen. The three-dimensional progressive damage model incorporates a three-dimensional maximum stress criterion to predict the intra-ply damage initiation, followed by a fracture-energy-based smeared crack model to capture the post-peak softening behavior. Driven by the dominant through-the-thickness failure under impact loading, a three-dimensional continuum damage model is implemented for the three-dimensional solid element via its explicit material model for Abaqus (VUMAT) to capture the effect of three-dimensional stress state and the interaction of matrix cracking and delamination. Abaqus’ restart analysis capability is used to activate the compression after impact analysis using the final damage state from the dynamic impact analysis. Both the dynamic failure and the compression after impact are demonstrated via a suite of verification examples followed by the sensitivity analysis using distinct impact configurations. The predictive capability of the proposed three-dimensional damage model is first verified using a static open-hole tension test. Applications of the damage model are then demonstrated for simulations of the dynamic drop-weight tests and compression after impact tests. A comparative study on the developed method is performed using the results predicted from the open-source CompDam. A sensitivity study is also performed to demonstrate the impact energy-dependent failure mode. The proposed model has shown its advantages in performing a quick assessment of impact damage and its effects on the residual compressive strength.

Acoustic Emission Analysis of Composite Laminates under Low Velocity Impact

2010 ◽  
Vol 118-120 ◽  
pp. 216-220 ◽  
Author(s):  
Hao Chen ◽  
Xiao Yan Tong ◽  
Xiang Zheng ◽  
Lei Jiang Yao
Keyword(s):  
Acoustic Emission ◽  
Composite Laminates ◽  
Damage Zone ◽  
High Energy ◽  
Matrix Cracking ◽  
Low Velocity Impact ◽  
Low Velocity ◽  
Emission Analysis ◽  
Velocity Impact ◽  
The Impact

One of the problems preventing the industrial application of composites is the lack of an efficient method to detect and discriminate among types of damage occurring during service. To solve this problem, low velocity impact experiments are carried out on T300/QY8911 composite laminates. And synchronously, the acoustic emission (AE) technique and impact monitoring systems were used to record the AE signals and the impact force. The damage evolution, damage modes and acoustic emission (AE) activity were easily detected and evaluated by the analysis of both AE waveform and impact load. In this way, the damage development process containing matrix cracking, delamination and fibers breakage is investigated. The energy release of damage are theoretically approximated and correlated with the AE energy. By the theory, the “high energy damage zone” is defined in the scatter diagrams of amplitude-frequency. It is easily to prove that the primary damage mode of “high energy damage zone” is delamination.

Sign in / Sign up

Export Citation Format

Share Document