scholarly journals Grain shape effects in bed load sediment transport

2021 ◽  
Author(s):  
Eric Deal ◽  
Jeremy Venditti ◽  
Santiago Benavides ◽  
Ryan Bradley ◽  
Qiong Zhang ◽  
...  

Bed load sediment transport, in which wind or water flowing over a bed of sediment causes grains to roll or hop along the bed, is a critically important mechanism in contexts ranging from river restoration to planetary exploration. Despite its widespread occurrence, predictions of bed load sediment flux are notoriously imprecise. Many studies have focused on grain size variability as a source of uncertainty, but few have investigated the role of grain shape, even though shape has long been suspected to influence transport rates. Here we show that grain shape can modify bed load transport rates by an amount comparable to the scatter in many sediment transport data sets. We develop a theory that accounts for grain shape effects on fluid drag and granular friction and predicts that the onset and efficiency of bed load transport depend on the mean drag coefficient and bulk friction coefficient of the transported grains. Laboratory flume experiments using a variety of grain shapes confirm these predictions. We propose a shape-independent sediment transport law that collapses our experimental measurements onto a single trend, allowing for more accurate predictions of sediment transport and helping reconcile theory developed for spherical particle transport with the behavior of natural sediment grains.

2011 ◽  
Vol 666 ◽  
pp. 36-76 ◽  
Author(s):  
CRISTIAN ESCAURIAZA ◽  
FOTIS SOTIROPOULOS

Motivated by the need to gain fundamental insights into the mechanisms of bed-load sediment transport in turbulent junction flows, we carry out a computational study of Lagrangian dynamics of inertial particles initially placed on the bed upstream of a surface-mounted circular cylinder in a rectangular open channel (Dargahi, J. Hydraul. Engng, vol. 116, 1990, pp. 1197–1214). The flow field at Re = 39000 is simulated using the detached eddy simulation (DES) approach (Spalart et al., In Advances in DNS/LES, ed. C. Liu & Z. Liu, 1997, Greyden), which has already been shown to accurately resolve most of the turbulent stresses produced by the low-frequency, bimodal fluctuations of the turbulent horseshoe vortex (Paik et al., J. Hydraul. Engng, vol. 131, 1990, pp. 441–456; Escauriaza & Sotiropoulos, Flow Turbul. Combust., 2010, in press). The trajectory and momentum equations for the sediment particles are integrated numerically simultaneously with the flow governing equations assuming one-way coupling and neglecting particle-to-particle interactions (dilute flow) but taking into account bed–particle interactions and the effects of the instantaneous hydrodynamic forces induced by the resolved fluctuations of the coherent vortical structures. The computed results show that, in accordance with the simulated clear-water scour condition (i.e. the magnitude of the particle stresses is near the threshold of motion), the transport of sediment grains is highly intermittent and exhibits essentially all the characteristics of bed-load sediment transport observed in laboratory and field experiments. Groups of sediment grains are dislodged from the bed simultaneously in seemingly random bursting events and begin to move, saltating or sliding along the bed. Furthermore, particles that are not entrained into the bed-load layer are found to form streaks aligned with near-wall vortices around the cylinder. The global transport of particles is studied by performing a statistical analysis of the bed-load flux to reveal scale-invariance of the process and multifractality of particle transport as the overall effect of the coherent structures of the flow. A major finding of this work is that a relatively simple Lagrangian model coupled with a coherent-structure resolving simulation of the turbulent flow is able to reproduce the sediment dynamics observed in multiple experiments performed under similar conditions, and provide fundamental information on the initiation of motion and the multifractal nature of bed-load transport processes. The results also motivate the development of new Eulerian bed-load transport models that consider unsteady conditions and incorporate the intermittency of the unresolved scales of sediment motion.


2021 ◽  
Vol 9 ◽  
Author(s):  
Le Wang ◽  
Dayu Wang ◽  
Alan Cuthbertson ◽  
Deyu Zhong ◽  
Gareth Pender

Differential parametric values associated with bed load sediment transport, that result at the same discharge levels on the rising and falling limbs of a flood hydrograph, are usually defined as bed load hysteresis. This hysteresis in bed load sediment transport rates is of considerable interest in the field of fluvial hydraulics. Within this study, a series of well-defined, symmetrical hydrograph flows are generated over a graded, mobile sediment bed to fully examine the hysteresis of the resulting bed load sediment transport in terms of the threshold of motion, and differential bed load transport rates and bed load yields during the hydrographs. The experiments are conducted in a titling flume without sediment supply specified at the upstream inlet, thereby representing typical river reach conditions immediately downstream of a dam that are exclusively subject to net in-channel bed degradation from sediment transport initiated during flood events. Our results show that the fractional bed load transport of defined fine, medium and coarse size classes within the graded sediment bed generally display clockwise, no/mixed and counter-clockwise hysteresis patterns, respectively, with clockwise hysteresis most commonly found for the coarse size class mobilised by hydrographs with long durations. By contrast, counter-clockwise hysteresis is usually observed for fine size class transported by hydrographs with short durations. Accordingly, the corresponding reference stresses for each size class vary between different hydrographs and are primarily controlled by the hydrograph flashiness (i.e. unsteadiness) and magnitude (i.e. total water work). Moreover, it is shown that the hysteresis effect, particularly for those size classes and hydrograph combinations that result in clockwise and counter-clockwise behaviour, should be fully accounted for when reproducing bed load transport rates using separate-limb based method. Finally, we investigate the relative fractions of the overall bed load yields generated during the rising and falling limbs of all symmetrical hydrographs (i.e. the bed load yield ratio), which are found to be primarily dependent on bed load transport hysteresis. Finally, the relationship between the bed load yield ratio and the ratio of reference stresses for the fractional sediment motion of each size class on both limbs is found to follow a power law.


2013 ◽  
Vol 14 (3) ◽  
pp. 362-370

Systematic measurements of sediment transport rates and water discharge were conducted in the Nestos River (Greece), at a place located between the outlet of Nestos River basin and the river delta. This basin area is about 838 km2 and lies downstream of the Platanovrysi Dam. Separate measurements of bed load transport and suspended load transport were performed at certain cross sections of the Nestos River. In this study, relationships between sediment transport rates and stream discharge for the Nestos River are presented. A nonlinear regression curve (4th degree polynomial curve; r2 equals 0.62) between bed load transport rates and stream discharge, on the basis of 63 measurements, was developed. In addition, a nonlinear regression curve (5th degree polynomial curve; r2 equals 0.95) between suspended load transport rates and stream discharge, on the basis of 65 measurements, was developed. The relatively high r2 values indicate that both bed load transport rates and, especially, suspended load transport rates can be predicted as a function of the stream discharge in the Nestos River. However, the reliability of the regression equations would have been higher if more measured data were available.


2021 ◽  
Vol 2 (1) ◽  
pp. 1-7
Author(s):  
Ramadhan Hidayat Putra ◽  
Amad Syarif Syukri ◽  
Catrin Sudarjat ◽  
Vickky Anggara Ilham

Research on Aepodu Weir Sediment Transport Analysis in South Konawe District, based on observations in the field, Aepodu Weir hasa sediment buildup that has now exceeded the height of the weirlight house. The purpose of the study was to analyze the magnitudeof Aepodu river flow and to analyze the amount of sedimenttransport that occurred in the Aepodu dam. The method used todetermine the amount of bed load transport uses stchoklitscht, whilefor transporting suspended load using forcheimer.The results of the analysis of the average flow of the Aepodu riverwere 3,604 m3/ second. Sediment transport that occurs in Aepoduweir is Bedload transport (Qb) of 291625.771 tons / year, andsuspended load transport (Qs) of 16972,423 tons / year, so that thetotal sediment transport (QT) is 308598,194 tons / year.


2015 ◽  
Vol 3 (1) ◽  
pp. 105-112 ◽  
Author(s):  
M. W. Schmeeckle

Abstract. Bed load transport over ripples and dunes in rivers exhibits strong spatial and temporal variability due to the complex turbulence field caused by flow separation at bedform crests. A turbulence-resolving flow model downstream of a backward-facing step, coupled with a model integrating the equations of motion of individual sand grains, is used to investigate the physical interaction between bed load motion and turbulence downstream of separated flow. Large bed load transport events are found to correspond to low-frequency positive pressure fluctuations. Episodic penetration of fluid into the bed increases the bed stress and moves grains. Fluid penetration events are larger in magnitude near the point of reattachment than farther downstream. Models of bed load transport over ripples and dunes must incorporate the effects of these penetration events of high stress and sediment flux.


1976 ◽  
Vol 7 (5) ◽  
pp. 293-306 ◽  
Author(s):  
Frank Engelund ◽  
Jørgen Fredsøe

The paper presents a simple mathematical model for sediment transport in straight alluvial channels. The model, which is based on physical ideas related to those introduced by Bagnold (1954), was originally developed in two steps, the first describing the bed load transport (Engelund 1975) and the second accounting for the suspended load (Fredsøe and Engelund 1976). The model is assumed to have two advantages as compared with empirical models, first it is based on a description of physical processes, secondly it gives some information about the quantity and size of the sand particles in suspension and the bed particles.


2018 ◽  
Vol 6 (4) ◽  
pp. 1089-1099 ◽  
Author(s):  
Dylan B. Lee ◽  
Douglas Jerolmack

Abstract. Fluvial bed-load transport is notoriously unpredictable, especially near the threshold of motion where stochastic fluctuations in sediment flux are large. Laboratory and field observations suggest that particles are entrained collectively, but this behavior is not well resolved. Collective entrainment introduces new length scales and timescales of correlation into probabilistic formulations of bed-load flux. We perform a series of experiments to directly quantify spatially clustered movement of particles (i.e., collective motion), using a steep-slope 2-D flume in which centimeter-scale marbles are fed at varying rates into a shallow and turbulent water flow. We observe that entrainment results exclusively from particle collisions and is generally collective, while particles deposit independently of each other. The size distribution of collective motion events is roughly exponential and constant across sediment feed rates. The primary effect of changing feed rate is simply to change the entrainment frequency, although the relation between these two diverges from the expected linear form in the slowly driven limit. The total displacement of all particles entrained in a collision event is proportional to the kinetic energy deposited in the bed by the impactor. The first-order picture that emerges is similar to generic avalanching dynamics in sandpiles: “avalanches” (collective entrainment events) of a characteristic size relax with a characteristic timescale regardless of feed rate, but the frequency of avalanches increases in proportion to the feed rate. The transition from intermittent to continuous bed-load transport then results from the progressive merger of entrainment avalanches with increasing transport rate. As most bed-load transport occurs in the intermittent regime, the length scale of collective entrainment should be considered a fundamental addition to any probabilistic bed-load framework.


2018 ◽  
Author(s):  
Dylan B. Lee ◽  
Doug Jerolmack

Abstract. Fluvial bed-load transport is notoriously unpredictable, especially near the threshold of motion where stochastic fluctuations in sediment flux are large. A general statistical mechanics framework has been developed to formally average these fluctuations, and its application requires an intimate understanding of the probabilistic motion of individual particles. Laboratory and field observations suggest that particles are entrained collectively, but this behavior is not well resolved. Collective entrainment introduces new length and time scales of correlation into probabilistic formulations of bed-load flux. We perform a series of experiments to directly quantify spatially-clustered movement of particles (i.e., collective motion), using a steep-slope 2D flume in which centimeter-scale marbles are fed at varying rates into a shallow and turbulent water flow. We observe that entrainment results exclusively from particle collisions and is generally collective, while particles deposit independently of each other. The size distribution of collective motion events is roughly exponential and constant across sediment feed rates. The primary effect of changing feed rate is simply to change the entrainment frequency, although the relation between these two diverges from the expected linear form in the slowly-driven limit. The total displacement of all particles entrained in a collision event is proportional to the kinetic energy deposited into the bed by the impactor. The first-order picture that emerges is similar to generic avalanching dynamics in sandpiles: avalanches (collective entrainment events) of a characteristic size relax with a characteristic timescale regardless of feed rate, but the frequency of avalanches increases in proportion to the feed rate. The transition from intermittent to continuous bed-load transport then results from the progressive merger of entrainment avalanches with increasing transport rate. As most bed-load transport occurs in the intermittent regime, the length scale of collective entrainment should be considered a fundamental addition to any probabilistic bed-load framework.


Water ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 73 ◽  
Author(s):  
Gergely T. Török ◽  
János Józsa ◽  
Sándor Baranya

The aim of this study is to introduce a novel method which can separate sand- or gravel-dominated bed load transport in rivers with mixed-size bed material. When dealing with large rivers with complex hydrodynamics and morphodynamics, the bed load transport modes can indicate strong variation even locally, which requires a suitable approach to estimate the locally unique behavior of the sediment transport. However, the literature offers only few studies regarding this issue, and they are concerned with uniform bed load. In order to partly fill this gap, we suggest here a decision criteria which utilizes the shear Reynolds number. The method was verified with data from field and laboratory measurements, both performed at nonuniform bed material compositions. The comparative assessment of the results show that the shear Reynolds number-based method operates more reliably than the Shields–Parker diagram and it is expected to predict the sand or gravel transport domination with a <5% uncertainty. The results contribute to the improvement of numerical sediment transport modeling as well as to the field implementation of bed load transport measurements.


1988 ◽  
Vol 1 (21) ◽  
pp. 133 ◽  
Author(s):  
Hitoshi Tanaka

The bed load transport rate due to wave motion is measured in a wave flume. The modified stream function theory of the author ( Tanaka (1988) ) is applied to the formulation of the sediment transport rate in order to include the non-linearity. The proposed formula predicts well except near the surf zone where the effect of the acceleration plays an important role.


Sign in / Sign up

Export Citation Format

Share Document