scholarly journals Quality Assessment of Some Rice Varieties Newly Adopted in NARC

2016 ◽  
Vol 9 ◽  
pp. 48-54
Author(s):  
Ujjwol Subedi ◽  
Achyut Mishra ◽  
Man Bahadur Shrestha
Keyword(s):  
Calcium Content ◽  
Kernel Weight ◽  
Physical Analysis ◽  
Gelatinization Temperature ◽  
Uptake Ratio ◽  
Elongation Ratio ◽  
Rice Varieties ◽  
Head Rice ◽  
Breadth Ratio ◽  
Temperature Water

Five rice varieties newly adopted in NARC were studied for their varietal differences in relation to quality characteristics such as physicochemical and cooking qualities. In physical analysis bulk density, density, thousand kernel weight and length to breadth ratio were recorded as highest in ‘Lumle-2’ (0.602gm/ml), ‘Lumle-2’ (27.789gm), ‘UPLRI-5’ (1.361gm/ml) and ‘IET-16775’ (4.710) varieties respectively. The milling and head rice recovery were recorded maximum in ‘Lumle-2’ (78.821%) and ‘UPLRI-5’ (78.282%) respectively. Protein, fat, amylose, crude-fiber and total-ash were ranged from 8.292-13.346%, 1.147-1.872%, 24.541-27.396% and 0.707-1.379% respectively. Iron, phosphorous and calcium content were estimated in the range 1.016-2.325mg/100g, 204.036-336.532mg/100g and 16.189-29.813mg/100g respectively. From organoleptic test, ‘IET-16775’ variety was scored as strongest aroma. ‘Lumle-2’, ‘Chhomrong’, ‘Machapuchhre-3’ varieties were shown as intermediate gelatinization-temperature and ‘UPLRI-5’ and ‘IET-16775’ varieties were recorded as high gelatinization-temperature. Water uptake ratio, cooking time, elongation ratio and gruel loss were found in the range 1.696-2.667, 18-25minutes, 1.252-1.428, and 2.477-6.188% respectively. 

Penilaian Ciri Fisiokimia, Mutu Memasak dan Komposisi Zat Pemakanan Beras MR 283 dan MR 284

2014 ◽  
Vol 70 (6) ◽  
Author(s):  
Rosniyana Ahmad ◽  
Amiruddin Mokhtar ◽  
Elixon Sunian
Keyword(s):  
Physicochemical Properties ◽  
Gelatinization Temperature ◽  
Uptake Ratio ◽  
Nutritional Content ◽  
Elongation Ratio ◽  
Milled Rice ◽  
Rice Varieties ◽  
Solid Loss ◽  
Rice Samples ◽  
Gel Consistency

The purpose of this study was to determine the physicochemical properties, cooking characteristics and nutritional content of MR 283 and MR 284 rice varieties. These samples were evaluated in form of milled rice. The physicochemical properties determined were gelatinization temperature and gel consistency. The samples analysed had high gelatinization temperature. Intermediate gel was detected in the rice samples. Variations in cooking time, elongation ratio, volume of expansion, water uptake ratio and solid loss were observed. The rice had elongation ratio of less than 2 which indicated that rice samples did not elongate during cooking. MR 283 milled rice contained 7.43% protein and 0.77% fat contents while MR 284 had 8.6 and 0.74% of protein and fat contents respectively. Analysis of mineral and vitamin contents indicates that the rice samples had different values for nutritional contents.

scholarly journals Combining ability and heritability of selected rice varieties for grain yield, its components and grain quality characters

Genetika ◽  
2015 ◽  
Vol 47 (2) ◽  
pp. 559-570 ◽  
Author(s):  
Mehrzad Allahgholipour ◽  
Ezatollah Farshdfar ◽  
Babak Rabiei
Keyword(s):  
Grain Yield ◽  
Combining Ability ◽  
Grain Quality ◽  
Amylose Content ◽  
Gelatinization Temperature ◽  
Narrow Sense ◽  
Rice Varieties ◽  
Narrow Sense Heritability ◽  
Head Rice ◽  
Additive Gene

This study was conducted to determine the combining ability and heritability of rice grain yield, its components and some grain quality traits such as amylose content (AC), gelatinization temperature (GT), gel consistency (GC) and head rice recovery (HRR). The study was commenced by crossing the selected rice varieties based on a full diallel mating design. The F1 was harvested at the end of the season. In the following season, the crossed, reciprocal and parental lines were planted in randomly complete block design with three replications. Analysis of variance indicated that genotypes were significantly different for all traits. The diallel analysis by Griffing`s method showed highly significant differences for GCA for number of panicles per plant (PN), amylose content, gelatinization temperature and head rice recovery. Highly significant differences were also observed for both SCA and REC for all evaluated characters. The results showed that the grain yield (GY), number of filled grains (FGN), 100-grain weight (HGW) and GC were controlled by non-additive gene action, while the inheritance of PN, AC, GT and HRR were largely controlled by additive gene effects, although non- additive genetic components and reciprocal effect were also involved, which suggest that a selection process could be done in the early generations. The two improved lines (RI18442-1 and RI18430-46) were found to be good general combiners for GY and FGN, while the best combiners for PN was Tarom Mohali and IR50 and for HGW was RI18430-46. The best combinations for GY were RI18430-46 ? IR50, Tarom Mohali ? RI18447-2 and Daylamani ? RI18430-46. The good hybrids were Tarom Mohali ? IR50, Line23 ? RI18447-2 and Line23 ? Backcross line for AC. Narrow sense heritability showed that the GY and GC had the lowest values while the other traits had either moderate or high heritability, which indicates selection in the early generations could be done to fix the favorable genes. In present study, narrow sense heritability was high for AC and moderate for GT, PN and HRR.

scholarly journals Milling, Nutritional, Physical and Cooking Properties of Four Basmati Rice Varieties

2018 ◽  
Vol 4 ◽  
pp. 18-24
Author(s):  
Pravin Ojha ◽  
Omkar Chaudhary ◽  
Ujjwol Subedi ◽  
Roman Karki ◽  
Durga Man Singh Dongol
Keyword(s):  
Cooking Quality ◽  
Expansion Ratio ◽  
Basmati Rice ◽  
Limited Information ◽  
Elongation Ratio ◽  
Milled Rice ◽  
Rice Varieties ◽  
Cooking Properties ◽  
Head Rice ◽  
Characteristic Features

Rice is one of the most popular staple foods produced contributing higher most in agriculture gross domestic production in Nepal. Thus, nutritional, physicochemical, and cooking properties of rice might interplay important roles in their production and farming practice, therefore, it is inevitable to understand these characteristic features. However, there has been only limited information available on such properties, therefore we aimed to examine nutritional, physicochemical and cooking properties of four Basmati varieties of rice namely Red Basmati, White Basmati, Black Basmati and Pokhareli Basmati. These rice varieties were purchased from different places in Nepal in paddy form. In this study various parameters associated with milling, nutritional, physical and cooking properties were evaluated. To measure protein contents in rice, Kjeldal method was implied. Among the varieties, the protein content was maximum in Red Basmati (7.74%) and minimum in Black Basmati (6.51%). The milled rice percentage and head rice recovery were maximum in Pokhareli Basmati represented by 72.02±0.10 and 67.46±0.42, respectively, while and minimum in White Basmati represented by 68.17±0.50 and 65.11±0.28, respectively. The kernel elongation ratio and volume expansion ratio was maximum in Red Basmati represented by 1.62 and 2.85 respectively. Water uptake ratio was maximum 3.11 in Black Basmati and minimum of 2.18 in Red Basmati. Gruel loss was found lowest 1.05% in Red Basmati and highest represented by 2.40% in Black Basmati. The highest starch iodine blue value of 0.21 was observed in Red Basmati and lowest of 0.12 in Black Basmati. The Red Basmati was found to have the better cooking quality among all varieties.

scholarly journals Variety difference of physicochemical and cooking properties of selected brown rice from Thailand and Malaysia

Food Research ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 630-635
Author(s):  
M.K. Chapagai ◽  
Wan Rosli W.I. ◽  
T. Karilla ◽  
S. Pinkaew
Keyword(s):  
Cooking Quality ◽  
Brown Rice ◽  
Textural Properties ◽  
Rice Flour ◽  
Uptake Ratio ◽  
Elongation Ratio ◽  
Hydration Kinetics ◽  
Rice Varieties ◽  
Cooking Properties ◽  
Solid Loss

Rice is a major staple food in Thailand and Malaysia. Although brown rice is a highly healthy substitute, preference is very low due to its texture and cooking quality. However, there are some brown rice varieties such as Sungyod (SY), Chiang (CH), Lepnok (LP) from Thailand and long grain specialty 1(LS1) and long grain specialty 2 (LS2) from Malaysian peninsula are commonly consumed in such areas. This study aimed to investigate the physicochemical and the cooking properties of these brown rice to understand the properties for better utilization. Therefore, Rapid visvo analyser (RVA), soaking characteristics, general cooking properties, textural properties and calorific values were measured and compared in 5 varieties of brown rice. Hydration kinetics indicated that LS1 and LS2 were faster in water absorption to reach plateau compared to the SY, LP, and CH. The cooking time of these brown rice was in the range from 29 to 35 min. The cooked brown rice had length/breadth (L/B) ratio (2.4 – 3.0), water uptake ratio (2.5 – 3.0), elongation ratio (1.1 –1.4) and gruel solid loss (3.2 – 5.2%). The hardness and the cohesiveness measured from texture analyzer were in the range of 6.75 – 15.5 N and 0.13 – 0.16. There was a significant variation in RVA pasting property of whole rice flour (p < 0.05). The variations of different properties of brown rice could be considered for the processing of brown rice and its application.

scholarly journals Effect of Parboiling Conditions on Physical and Cooking Quality of Selected Rice Varieties

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Ayenew Meresa ◽  
Ayalew Demissew ◽  
Seifu Yilma ◽  
Getu Tegegne ◽  
Kiber Temesgen
Keyword(s):  
Water Uptake ◽  
Rice Yield ◽  
Rice Variety ◽  
Uptake Ratio ◽  
Rice Varieties ◽  
Broken Rice ◽  
Head Rice ◽  
Head Rice Yield ◽  
Soaking Temperature

Most locally cultivated rice varieties in Ethiopia have low physical (low head rice yield, high broken rice yield, and high percentage of chalkiness) and cooking qualities (low water uptake ratio and swelling ratio). Parboiling, a process which involves soaking, steaming, and drying, has been identified as a key technique to improve cooking and milling quality of rice. The current study is aimed at elucidating the effect of parboiling on physical and cooking qualities of three rice varieties (Gumara, Edget, and Narica4) collected from Fogera National Rice Research and Training Center, Amhara region, Ethiopia. Each rice variety was subjected to different soaking temperatures (40°C, 50°C, 60°C, 70°C, and 80°C) and steaming time (10, 20, 30, 40, and 50 minutes). The treatment effect results indicated that parboiling has a significant effect (P<0.05) on head rice yield and percentage of broken rice with increased soaking temperature and steaming time as compared to the control. For instance, percent head rice yield increased as soaking temperature (from 40 to 80°C) and steaming time (from 10 to 50 min) increased: for Gumara, from 4.07 to 93.6%, for Edget, 9.47 to 96.53, and from 3.20 to 91.67 for Narica4. Percentage chalkiness had decreased as soaking temperature and steaming time increased: 97.33% to 0.00% for Gumara, 97.80% to 0.00% for Edget, and 100.00% to 0.13% for Narica4 as compared to 100% for control of all varieties. The minimum cooking time was identified as 16-23 min for Gumara, 16-23 min for Edget, and 15-20 min for Narica4 rice varieties. The result of the present study clearly showed that parboiling with high soaking temperature and steaming time increased the head rice yield, water uptake ratio, decreased percentage chalkiness, and enhanced the overall quality of the rice varieties.

scholarly journals Evaluation of physical, milling and cooking properties of four new rice (Oryza sativa L.) varieties in Nigeria

2017 ◽  
Vol 6 (2) ◽  
Author(s):  
Mayowa S. Sanusi ◽  
Rahman Akinoso ◽  
Nahemiah Danbaba
Keyword(s):  
Water Uptake ◽  
Cooking Time ◽  
Width Ratio ◽  
Equivalent Diameter ◽  
Uptake Ratio ◽  
Elongation Ratio ◽  
Milled Rice ◽  
Cooked Rice ◽  
Cooking Properties ◽  
Breadth Ratio

This comparative study investigated some physical, milling and cooking properties of four new rice varieties (FARO 44, FARO 52, FARO 60 and FARO 61) in Nigeria. The varieties were processed into white rice and their properties analyzed separately using standard procedures. Results showed that paddy length, paddy-length-to-width-ratio, equivalent diameter, sphericity, grain volume, aspect ratio, thousand paddy grain weight, milled rice length, milled rice width, milled rice length to width ratio, milling recovery, head milled rice, broken milled rice, L*, a*, b*, elongation ratio, cooked-rice-length-to-breadth-ratio, water uptake ratio and cooking time were significantly different (p<0.05) for all the varieties. Milling recovery was found to vary from 65.3 to 68.33%; with FARO 60 having the highest head milled rice. It was observed that FARO 44 had the longest cooking time, elongation ratio and cooked rice length/breadth ratio while FARO 61 was found to have the highest water uptake ratio. There was significant positive correlation (r = 0.824) between percentage head milled rice and milling recovery while negative correlation existed between cooking time and L* (r= - 0.711). This information could be exploited by rice processors in the post-harvest processing of the varieties.

scholarly journals Analysis of cooking characteristics of important rice varieties marketed in Gujarat State

2020 ◽  
Author(s):  
Bhavesh L Jani ◽  
Bansee M Devani ◽  
Sanjay H Akbari ◽  
Dineshchandra C Joshi
Keyword(s):  
Water Uptake ◽  
Cooking Time ◽  
Uptake Ratio ◽  
Elongation Ratio ◽  
Gujarat State ◽  
Rice Varieties ◽  
Parboiled Rice ◽  
Solid Loss ◽  
Length Width ◽  
Pasting Temperature

Abstract The study was carried out to analyze cooking characteristics of important rice varieties grown and processed in Gujarat state of India. In the study cooking characteristics which are of the most important viz. optimum cooking time, elongation ratio, water uptake ratio, gruel solid loss, pasting temperature and final viscosity were determined by standard methodologies and found to be 17 min, 1.523, 2.6, 4.32%, 91.7 °C and 2558 ± 165.6 cP for parboiled rice, 12 min, 1.356, 2.7, 8.25%, 87.9 °C and 3546 ± 142.3 cP for Jeerasar rice and 14 min, 1.318, 2.8, 10%, 93.9 °C and 1523 ± 179.6 cP for GJ-17 rice, respectively. Also, the size i.e. length, width and thickness of all the three varieties were measured and plotted to observe the trend of expansion after cooking. From the above observations, it was found that parboiled rice has comparatively better cooking characteristics but has higher cooking time, which consumers may not accept for household purpose.

scholarly journals Heterosis and inbreeding studies for agronomic and quality traits in rice (Oryza sativa L.)

2019 ◽  
Vol 38 (4) ◽  
Author(s):  
K. Rukmini Devi ◽  
B.Satish Chandra ◽  
Y. Hari ◽  
V. Venkanna
Keyword(s):  
Grain Yield ◽  
Inbreeding Depression ◽  
Gene Action ◽  
Oryza Sativa L ◽  
Quality Traits ◽  
Rice Varieties ◽  
Head Rice ◽  
Kernel Length ◽  
Breadth Ratio ◽  
Selection Of

Heterosis and inbreeding depression was studied for twenty characters in seven parental lines and their eleven hybrids in rice. Significant positive average heterosis and heterobeltiosis was observed for effective tillers, grain yield /plant, panicle density ,filled grains /panicle, panicle length, length/breadth ratio, head rice recovery, milling percent and hulling percent. Significant negative heterosis was observed for days to 50 % flowering in desired direction. Among the crosses, Kavya × WGL-915, BPT-5024 × WGL-915, Kavya × HKR-08-62, BPT-5204 × MTU-1075 and BPT-5204 × Gontrabidhan recorded significant positive heterobeltiosis for grain yield/plant and also two to three important economic characters and showed significant positive inbreeding depression . The inheritance of yield, yield components and quality traits were mostly governed by non additive type of gene action as evident from high heterosis followed by high inbreeding depression and in such cases heterosis breeding is more feasible to achieve quantum jump in rice yield while, pedigree method in few specific crosses showing low inbreeding depression in order to improve characters like head rice recovery, kernel length, length/breadth ratio, kernel length after cooking and days to 50% flowering etc. Selection of good parents was found to be most important for developing high yielding rice varieties with desirable characters.

scholarly journals Efficacy of Irrigation Interval after Anthesis on Grain Quality, Alkali Digestion, and Gel Consistency of Rice

Agriculture ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 325
Author(s):  
Ramin Rayee ◽  
Tran Dang Xuan ◽  
Tran Dang Khanh ◽  
Hoang-Dung Tran ◽  
Kifayatullah Kakar
Keyword(s):  
Protein Content ◽  
Grain Quality ◽  
Cooking Quality ◽  
Amylose Content ◽  
Rice Grain ◽  
Gelatinization Temperature ◽  
Rice Varieties ◽  
Irrigation Interval ◽  
Gel Consistency ◽  
Alkali Digestion

The management of amylose and protein contents and cooking quality are the main challenges in rice macronutrients and quality improvement. This experiment was conducted to examine the rice grain quality, alkali digestion, and gel consistency responses to irrigation interval after anthesis. Three rice varieties (K1, K3, and K4) were subjected to different irrigation intervals (1, 2, and 3 d) after anthesis. The findings of this study showed that the protein content was markedly increased from 6.53–6.63% to 9.93–10.16%, whilst the amylose content was decreased significantly from 22.00–22.43% to 16.33–17.56% under stressed treatments at irrigation intervals, whilst the quantity of fatty acids was not affected. The 3-d irrigation interval recorded the highest protein content but the lowest amylose value. In addition, this treatment shows lower gelatinization temperature, but it is negatively associated with hard gel consistency under irrigation interval. This study highlights that the water management following a 3-d irrigation interval from anthesis is a useful and simple treatment to improve rice nutrients and grain cooking quality.

Sign in / Sign up

Export Citation Format

Share Document