scholarly journals Geology of slopes in the Crocker Range, Sabah, Malaysia

2006 ◽  
Vol 34 ◽  
pp. 73-80
Author(s):  
F. Tongkul ◽  
H. Benedick ◽  
F. K. Chang

Slope failures are frequent occurrences along roads in Malaysia. Not until recently, geological inputs were rarely sought when designing and constructing roads on mountainous areas. This paper highlights the result of a geological study on selected slopes along a major road across Sabah's main mountain range, the Crocker Range, which is comprised mostly of folded Eocene sedimentary rocks. A total of 48 slopes facing potential failure problems were studied. The following four main potential sources of failures were recognised: 1) related to intensely sheared mudstones within a localised fault zone; 2) related to unfavourable orientation of discontinuity planes whereby bedding and joint planes of sandstone beds occur parallel or sub-parallel to the slope face; 3) related to the presence of intensely fractured and sheared sandstone and mudstone beds within a regional fold hinge; and 4) related to the presence of old landslide deposits. The recommendations to stabilise problematic slopes include covering the unstable slope face with concrete or vegetation and cutting back the slopes further.

2019 ◽  
Vol 76 (15) ◽  
pp. 1158-1164 ◽  
Author(s):  
Karen Nolan ◽  
Andrew R Zullo ◽  
Elliott Bosco ◽  
Christine Marchese ◽  
Christine Berard-Collins

Abstract Purpose The purpose of this study was to demonstrate the utility of failure modes and effects analysis (FMEA) for systematically identifying potential sources of controlled substance diversion and developing solutions in an academic health system. Methods The FMEA was conducted by an 18-member cross-functional team from the department of pharmacy. The team developed scoring criteria specifically for controlled substance diversion, outlined the controlled substance processes from procurement to administration or disposal, and identified ways in which each step of the medication supply process might fail (failure modes) and result in diversion of controlled substances. Failure modes with a vulnerability score of 48 or 64 were considered highest risk and were immediately intervened on by the FMEA team. Results The FMEA outlined a total of 10 major steps and 30 substeps in the controlled substance supply process. From this, 103 potential failure modes were identified, with 24 modes (23%) receiving a vulnerability score of 48 or 64. Development of specific reports addressed 15 failure modes, while 9 involved pharmacy workflow alterations. Notable reports included controlled substance activity under temporary patients and discrepancy trends by user, medication, and patient care area. Notable workflow alterations included expanded use of cameras in high-risk areas and additional verification checks. Conclusion FMEA allowed for systematic identification of controlled substance diversion opportunities, prioritization by level of vulnerability, and the development of targeted strategies to reduce risk of diversion.


Minerals ◽  
2017 ◽  
Vol 8 (1) ◽  
pp. 6 ◽  
Author(s):  
Sanna Masod Abdulqader ◽  
Boris Vakanjac ◽  
Jovan Kovačević ◽  
Zorana Naunovic ◽  
Nevena Zdjelarević

2013 ◽  
Vol 69 ◽  
pp. 31-53 ◽  
Author(s):  
Nguyễn Quốc Cu’ò’ng ◽  
Antoni K. Tokarski ◽  
Anna Świerczewska ◽  
Witold A. Zuchiewicz ◽  
Nguyễn Trọng Yêm

2020 ◽  
Vol 57 (3) ◽  
pp. 177-198
Author(s):  
Richard H. Groshong ◽  
Ken Kittleson

The Boulder-Weld fault zone, located southeast of Boulder, Colorado, is about 10 km (6 mi) wide, 34 km (21 mi) long, and involves at least 335 m (1100 ft) of upper Cretaceous sedimentary rocks. It affects the Cretaceous upper Pierre Shale, Fox Hills Sandstone, and the coal–bearing lower Laramie Formation. This study is a detailed examination of the eastern portion of the fault zone which consists of undisturbed areas separated by three long, narrow, fault-bounded uplifts that have received a variety of interpretations over the years. The fault zone geometry is determined from 21 closely spaced cross sections that use more subsurface data than previous studies, incorporate the elevations of the major economic coal seam derived from a published composite structure-contour map, and are area balanced using area-depth-strain (ADS) analysis. The most common structural style is a pop-up structure in which the uplifts are bounded on both sides by reverse faults. At larger-displacement the pop-ups are at the tip of the ramp and a second fault has formed close to the base of the ramp. A few sections show simple ramp anticlines developed above listric thrusts. The lower detachment for all structures is the distinctive Kp2 marker in the upper Pierre Shale. ADS analysis of the best-controlled uplifts shows that the uplifts are area balanced and confirms the lower detachment to be near Kp2. The structures are interpreted to have formed as a gravity slide because they formed in a break-back sequence, a characteristic of gravity gliding, and because the transport direction is approximately down the current southeast dip of the Kp2 detachment.


2012 ◽  
Vol 98 (3) ◽  
pp. 6-8
Author(s):  
C Rowland

AbstractThe military has a tradition of supporting and promoting scientific expeditions. The past five years have witnessed a series of Defence Medical Service (DMS) expeditions to mountainous areas of the world, which set out with the dual purpose of researching high altitude human physiology and promoting the uptake of adventurous pursuits within the military. Beginning with exercise Medical Sentinel to Aconcagua, Argentina, in 2007, members of the DMS have since conducted two expeditions to the Himalayas (expedition Imja Tse, 2009 and expedition Khumbu Ramble, 2011) before returning to South America, to the Cordillera Real mountain range in Bolivia, on expedition Bolivian Venture, in late May 2012. This article aims to provide a brief background to the rationale behind these expeditions, a brief description of our understanding of altitude sickness and a history of the adventures that members of the Defence Medical Services have been having contributing to that understanding.


2020 ◽  
pp. 1-20
Author(s):  
Bo Yang ◽  
Alan S. Collins ◽  
Morgan L. Blades ◽  
Tim J. Munson ◽  
Justin L. Payne ◽  
...  

Abstract The c. 1.5–1.3 Ga Wilton package, the upper succession of the greater McArthur Basin, preserves detailed tectono-sedimentary evidence for the Mesoproterozoic evolution of the North Australian Craton (NAC). In addition, it is a valuable global sedimentary repository for the poorly explored Mesoproterozoic. New detrital zircon U–Pb age and Lu–Hf isotope data, collected from multiple, geographically separated, basins that make up the Wilton package, are compiled with previously published data to illuminate the basin evolution. The spatial and temporal variation in sedimentary provenance illustrates two major geographic changes that correspond to continent-scale tectonic convulsions of the NAC during the Mesoproterozoic. The first is shown by the influx of sediment sourced from east and southeast terranes. This is linked to rifting between Proterozoic Australia and Laurentia at c. 1.45 Ga, resulting in the uplift of the eastern margin of the NAC–SAC (South Australian Craton). The second basin geographic change is illustrated by a flux of southerly-sourced detritus that is interpreted to be tectonically driven by the uplift of the southern NAC, during the subduction/closure of the Mirning Ocean at c. 1.32 Ga. Spatially, sediment in the Wilton package is separated into two depositional systems: sedimentary rocks within the Birrindudu Basin, the western component of the Wilton package, have different detrital signatures relative to other Wilton package successions found east of the Daly Waters Fault Zone, in the Beetaloo Sub-basin, the McArthur Basin and the South Nicholson Basin. The Daly Waters Fault Zone is interpreted as an ancient bathymetric high, blocking sediment transport. Although they differ in sources, rocks in both the Birrindudu Basin and the eastern Wilton package record coeval shifts of basin provenance to southern sources. The coherent evolution of basin provenance indicates a consistent tectono-sedimentation history, and links the Birrindudu Basin and the other Wilton successions in a tectonic framework.


2020 ◽  
Author(s):  
Jean-Baptiste P. Koehl

Abstract. In the Late Devonian, Svalbard was affected by a short-lived episode of contraction called the Ellesmerian (Svalbardian) Orogeny, which resulted in top-west thrusting of Proterozoic basement rocks onto Devonian sedimentary strata along the Balliolbreen Fault, a major fault segment of the east-dipping Billefjorden Fault Zone, and juxtaposition of undeformed Mississippian–Permian strata against intensely folded Devonian rocks. The present study of field and seismic data shows that backward-dipping duplexes comprised of phyllitic coal and bedding-parallel décollements and thrusts localized along lithological transitions in thickened uppermost Devonian–Mississippian coals and coaly shales of the Billefjorden Group partially decoupled uppermost Devonian–Permian sedimentary rocks of the Billefjorden and Gipsdalen groups from Devonian rocks during Cenozoic contraction–transpression. In addition, Devonian strata probably experienced syn-depositional, post-Caledonian, extensional, detachment-related folding. Seismic data in Sassenfjorden and Reindalspasset show the presence of Cenozoic duplexes and bedding-parallel décollements within Lower–Middle Devonian, uppermost Devonian–Mississippian and uppermost Pennsylvanian–lowermost Permian sedimentary strata of the Wood Bay and/or Widje Bay and/or Grey Hoek formations, of the Billefjorden Group and of the Wördiekammen Formation respectively, which further decoupled stratigraphic units during Eurekan deformation. Bedding-parallel décollements and thrusts are possibly related to shortcut faulting, a roof décollement of a fault-bend hanging wall (or ramp) anticline, an imbricate fan, antiformal thrust stacks and/or fault-propagation folds over reactivated/overprinted basement-seated faults. Seismic data in Reindalspasset also indicate that Devonian sedimentary rocks might have deposited east of the Billefjorden Fault Zone, thus ruling out Late Devonian reverse movement along the Billefjorden Fault Zone in this area. Based on the present findings, juxtaposition of Proterozoic basement rocks against Lower Devonian sedimentary rocks along the Balliolbreen Fault in central Spitsbergen (e.g., Pyramiden–Odellfjellet) may be explained by down-east Carboniferous normal faulting with associated footwall rotation and exhumation and subsequent top-west Cenozoic thrusting along the Billefjorden Fault Zone. The uncertain relationship of the Balliolbreen Fault with uppermost Devonian–Mississippian sedimentary strata, the poorly constrained nature of the contact (unconformity or bedding-parallel décollements and thrusts?) between Lower Devonian and uppermost Devonian–Mississippian sedimentary strata, and along strike variations in cross-section geometry, offset stratigraphy, and inferred timing and kinematics along the Balliolbreen Fault suggest that this fault consists of several, discrete, unconnected (soft-linked and/or stepping) or, most probably, offset fault segments that were reactivated/overprinted with varying degree during Eurekan deformation due to strain partitioning. Finally, recent evidence for Devonian core complex exhumation and reinterpretation of presumed Ellesmerian structures and of Late Devonian amphibolite facies metamorphism suggest that Ellesmerian contraction is not necessary to explain fault geometries and (differential) deformation within Devonian–Permian sedimentary strata in Spitsbergen.


Sign in / Sign up

Export Citation Format

Share Document