scholarly journals The effect of time administration and concentration of probiotics of the growth and yield of suri cucumber plants (Cucumis melo L. var reticulatus Naudin).

AGRIFOR ◽  
2019 ◽  
Vol 18 (1) ◽  
pp. 23
Author(s):  
Iswita Iswita ◽  
Susylowati Susylowati ◽  
Eliyani Eliyani
Keyword(s):  
Plant Height ◽  
Cucumis Melo ◽  
Growth And Yield ◽  
Fruit Crops ◽  
Pests And Diseases ◽  
Significant Difference ◽  
Number Of Leaves ◽  
Height Increase ◽  
Cucumis Melo L ◽  
Fruit Diameter

Suri cucumber (Cucumis melo L. var reticulatus Naudin) is an annual plant. Probiotics is not a fertilizer in general, but materials containing effective microorganism that can help decompose the material present in the soil and can be used to inhibit the growth of plant pests and diseases in the soil, this study aims to determine: (1) the interaction between time and concentration on growth and yield on suri cucumber plants; (2) Time of giving probiotics that are appropriate for growth and yield on suri cucumber plants; and (3) Probiotic concentrations that are appropriate for growth and yield on suri cucumber plants. This research was conducted from April to July 2018 at the Kelurahan Loa Tebu, Kecamatan Tenggarong, Kabupaten Kutai Kartanegara. Factorial designs are arranged in Complete Randomized Design (CRD) with 6 replications. The first factor is the time administration of (W) probiotics at 7 am 12(w1) "> and 4 pm 12(w2)"> . The second factor is the concentration of (K) probiotics: : 0 ( 12k0"> ), 5 ( 12k1"> ),10 ( 12k2"> ) and( 12k3)"> 15 mL. 12L-1">  water. Variables observed in this study were plant height increase, number of leaves, fruit diameter, number and weight of fruit crops. The data were analyzed by analysis of variance (Anova), If the result of Anova showed significantly different, continued by Least Significant Difference(LSD) test at the 5% level to compare between two average treatments.. The results showed that (1) no interaction between the time administration and theconcentrationof probiotics on the growth and yield of cucumber plants on all of the observed variables, namely plant height increase, number of leaves, fruit diameter, number of fruit crops, weight of planting fruit; (2) the time of probiotic administration that has a significant effect on the variable plant height increase at 4 pm; and (3) the treatment of probiotic concentration has no significant effect on all observed variables.

The Effect of Pruning and Several Kinds of Growing Media Fertigation Hydroponic Systems Against Protection and Production of Melons (Cucumis Melo L.)

Nabatia ◽  
2016 ◽  
Vol 4 (2) ◽  
pp. 57-63
Author(s):  
M Abror ◽  
M Koko Ardiansyah
Keyword(s):  
Plant Height ◽  
Cucumis Melo ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Leaf Number ◽  
Growing Media ◽  
Hydroponic System ◽  
Wide Range ◽  
Number Of Leaves ◽  
Cucumis Melo L

This study aims to determine the effect of trimming with a wide variety of growing media hydroponic system fertigation on growth and yield of melon. Research will be conducted in the green house (House of plastic) UMSIDA Agriculture Faculty, Campus 2, Gelam, Candi, Sidoarjo, research time between the months of March to June 2016 using analysis of variance and continued test HSD 5%. The variables measured were plant height, leaf number, level of sweetness of fruit, fruit weight, high-fruit, thickness of the flesh of the fruit, conclusion from this research is going on the effect of trimming and a wide variety of growing media hydroponic system fertigation in treatment PM5 (trimming down, kokopit). There was also a real influence on the treatment PM6 (without pruning, kokopit) .In observation of plant height, leaf number, fruit weight, and high fruit. And also happens to influence a wide range of growing media on growth and yield of melon on hydroponics fertigation system, the PM6 treatment (without pruning, kokopit) had the highest rates in the observation of plant height, weight of the fruit, and the number of leaves.

scholarly journals Growth and Yield of Tomato (Lycopersicon esculentum Mill.) as Influenced by Poultry Manure and Biochar in Two (2) Soil Depths

2020 ◽  
pp. 55-63
Author(s):  
F. B. Musa ◽  
F. O. Abiodun ◽  
A. R. Falana ◽  
B. H. Ugege ◽  
R. V. Oyewumi ◽  
...  
Keyword(s):  
Plant Height ◽  
Poultry Manure ◽  
Botanical Garden ◽  
Growth And Yield ◽  
Tomato Plants ◽  
Randomized Design ◽  
Significant Difference ◽  
Number Of Leaves ◽  
Collar Diameter ◽  
And Control

Background and Objective: Unproductive soil has been a major problem to farmers, recent interest in the use of a stable organic manure (biochar) as soil amendment and poultry manure to increase soil fertility is also increasing. Hence, the experiment was conducted to assess the condition of poultry manure and biochar on the growth and yield of tomato. Materials and Methods: A greenhouse experiment was conducted at the Federal College of Forestry Ibadan, using polyethylene bag with 5 kg soil collected at two (2) soils depths, 0-15 cm and 15-30 cm depth at the botanical garden, Federal College of Forestry Ibadan. The experiment was arranged in a completely randomized design (CRD) with four replicates. The treatments used were poultry manure (5t/ha), biochar (10t/ha), mixture of poultry manure and biochar (1:1) and control (no amendment).The tomato seeds (UC82B) were sourced from NIHORT, Ibadan and raised in a germination basket. Data were collected weekly on plant height, collar diameter and number of leaves, 50% days to flowering and yield of tomato plants from two weeks after transplanting (WAT). Data collected were analyzed statistically using ANOVA while means were separated using LSD (p<0.05) where applicable. Results: In 0-15 cm soil, the growth variables (plant height, number of leaves and collar diameter) increased with various treatments used. The highest tomato height was observed with the application of biochar (10t/ha). All the treatments applied affected the number of tomato leaves at all weeks after transplanting (WAT) with poultry manure 5t/ha having the highest number of leaves at 7WAT, while collar diameter was significantly affected by various treatments from 2 to 5 WAT, with the mixture of P.M + BIO (1:1) recording the highest value and the control plot recorded the least values in all weeks. However, in 15-30 cm soil, there was  significant difference in the number of leaves of tomato among all the amended soil from 5 to 7 WAT, the highest tomato leaves were obtained when the soil was amended with poultry manure (5t/ha) and can be compared with other treatments. Interaction of poultry manure and biochar(1:1) and poultry manure 5 t/ha resulted in highest height of tomato plant from 3-7 WAT as compared to the control that had the least value but were not significantly different from the sole application of  biochar 10t/ha. Interaction of poultry manure + biochar (1:1) and poultry manure (5t/ha) gave the highest tomato flowering and fruits. Conclusion: Based on this result, biochar and poultry manure when added to soil, boosted the mineralization of the soil after amendment.

scholarly journals Induced-Growth and Yield Responses to Three Varieties of Tomato (Lycopersicon esculentum Mill.) by Sodium Azide (NaN3) and Grafting in Wet Season

2021 ◽  
Vol 4 (2) ◽  
pp. 84-91
Author(s):  
Aminu Y. ◽  
Bichi B.S. ◽  
Zakari S.I. ◽  
Muhammad A.U. ◽  
Alhassan A.Y.
Keyword(s):  
Sodium Azide ◽  
Growth And Yield ◽  
Wet Season ◽  
Local Varieties ◽  
Significant Difference ◽  
Number Of Leaves ◽  
Selected Traits ◽  
Yield Responses ◽  
Almost All ◽  
Fruit Diameter

The Effect of Sodium Azize and Grafting on Vegetative Growth PreliminaYield Parameters on Tomato in Wet Season, was investigated with the aim of inducing variability that could be exploited in the improvement of some quality traits in Tomato. The seeds of three varieties of tomato: (Roma, UC-82B and Local varieties) were treated with three different concentrations of sodium azide (0.2mM, 0.4 mM, 0.6 mM and 0.0 mM as control). The result showed highly significant difference (P≤0.01) in the effects of different concentrations of sodium azide on almost all the selected traits except on the fruit diameter where no significant difference was found. More so, the result also indicated highly significant difference (P≤0.01) among the varieties on the selected traits except in germination percent (1 WAP); where significant difference (P≤0.05) was found, and in number of leaves, and fruits diameters, no significant difference exists among the varieties. Furthermore, highly significant difference (P≤0.01) was found on the effects of grafting and sodium azide singly and in combine dosage as treatments on germination percent (1 and 2 WAP), and on number of leaves/plant. Significant difference (P≤0.05) was found on the effects of these treatments on the survival rate, while, no significant difference was found on the effects of the treatments on the number of fruits, fruit diameter, and pH. More so, no significant differences was found in the interactions except in the interaction in the interactions of variety and treatments on the number of leaves where highly significant difference (P≤0.01) was found.

scholarly journals THE EFFECT OF HYDROPONIC NUTRITION LEVELS ON THE GROWTH OF MUSTARD (BRASSICA SP.) PLANTS

2020 ◽  
Vol 1 (1) ◽  
pp. 40-52
Author(s):  
Arie Hapsani Hasan Basri ◽  
Mahmudah Mahmudah
Keyword(s):  
Plant Growth ◽  
Plant Height ◽  
Research Method ◽  
Growth And Yield ◽  
Leaf Width ◽  
Randomized Design ◽  
Significant Difference ◽  
Wet Weight ◽  
Number Of Leaves ◽  
Difference Test

The main roles of plant growth was nutrition. This research aims to determine the concentration of nutrients that can provide the best growth and yield on various mustard. The research method  used is a factorial Complete Randomized Design (RBD) with three replications and then analyzed using the Least Significant Difference test (LSD) at a level of 5%. The treatment of vegetable types is as follows: S1 = mustard pakchoy, S2 = mustard samhong, S3 = mustard pagoda, S4 = mustard pakchoy mini. Treatment with nutrition is the AB mix fertilizerzs number of leaves solution as follows: N1 = 1000 ppm, N2 = 1200 ppm, N3 = 1400 ppm, N4 = 1600 ppm, N5 = 1800 ppm. The results showed that plant height, number of leaves, leaf width and wet weight of the pagoda and mini pakchoy plants were not significantly different at 1000 ppm, 1200 ppm, 1400 ppm, 1600 ppm and 1800 ppm. Number of leaves of pakchoy significantly different at 1400 ppm. While the number of leaves and leaf width of samhong plants were not significantly different at each treatment, but were significantly different from plant height at 1600 ppm and significantly different from the wet weight at 1400 ppm

scholarly journals Comparative Assessment of Yield Performance of Neglected Cocoyam (Colocasia esculeta (L.) Schott) Parts as Planting Materials in the South Western Nigeria

2019 ◽  
pp. 32-37
Author(s):  
Ogunkunle Tajudeen ◽  
Oshagbemi H. O. ◽  
Gidado R. S. M. ◽  
Adenika O. F. Aruleba R. D.
Keyword(s):  
Plant Height ◽  
Block Design ◽  
Growth And Yield ◽  
Yield Potential ◽  
The South ◽  
Yield Performance ◽  
Significant Difference ◽  
Number Of Leaves ◽  
Mean Differences ◽  
Planting Materials

Hitherto, there is scarcity of information on the usefulness of neglected small corms and cormels of cocoyam in the South West Nigeria. A 9 (nine) months trial was conducted to compare the growth and yield performance of different types of cocoyam planting materials with treatment consisting of T1; sprouted small cocoyam cormels, T2, trimmed out lower parts of harvested cocoyam corm and T3; moderate sized corm of 50-100g (control) arranged in a Randomised Complete Block Design (RCBD) with three replicates. Data on the number of leaves and plant height was taking at 4 week interval for 24 weeks while data on number and weight of harvested cormels was taking at 9 months after planting (MAP). The data collected were subjected to a univariate General Linear Model (GLM) two ways Analysis of Variance (ANOVA) using IBM SPSS software statistical package 21. Significance mean differences were separated using Duncan Multiple Range Test (DMRT) at 0.05 level of significance. The result showed that the highest mean number of leaves and plant height was obtained from treatment T1 (10.22) and T2 (92.83) respectively at 24 weeks after planting (WAP). While both treatment T1 and T3 collectively had the highest number of consumable cormels (54.0) in which treatment T3 weighed the highest (3.202 kg). There was no significant difference (P>0.05) in both the number of leaves produced and plant height among the different cocoyam planting materials utilised at 24 (WAP). Similarly, there was no significant difference (P>0.05) in the number and weight of cormels produced by the different treatments at 9 months after planting (MAP). The study therefore concluded that both sprouted small cocoyam cormels, trimmed out corms during planting compared favourably with moderate sized corm of weight 50-100g commonly used as planting material in term of yield potential and therefore recommended to be schedule for demonstration to cocoyam farmers in the study area for adoption.

GROWTH AND YIELD INDICES OF CASSAVA (MANIHOT UTILISSIMA) AND SOIL PHYSICO-CHEMICAL PROPERTIES AS AFFECTED BY DIFFERENT TRADITIONAL TILLAGE PRACTICES IN A HUMID ENVIRONMENT

2021 ◽  
Vol 9 (3) ◽  
pp. 360-367
Author(s):  
Emmanuel Chukudinife ENUJEKE ◽  
Collins EGBUCHUA
Keyword(s):  
Soil Properties ◽  
Plant Height ◽  
Chemical Properties ◽  
Growth And Yield ◽  
Tillage Practices ◽  
No Till ◽  
Physico Chemical ◽  
Cassava Plant ◽  
Significant Difference ◽  
Number Of Leaves

The study was conducted to assess the effects of traditional tillage practices namely No-till, Ridge-till and Mound-till, on cassava growth parameters and soil physico-chemical properties. It was a factorial experiment laid out in a randomised complete block design replicated 3-times. The factors were the 3-tillage methods and cassava plant as a test crop. Data collected on soil properties include the particle size distribution, soil bulk density, soil water content, hydraulic conductivity, soil pH, soil organic carbon, total nitrogen, available phosphorus and exchangeable bases, while data collected on plant growth and yield indices include; plant height, stem girth, number of leaves, number of tubers, tuber length and weight of tubers. The data were collected at 2, 4, 6, 8, 10 and 12 months but cumulated at 12 months after planting. The data were subjected to analysis of variance and relationship between cassava tuber yield and some soil properties measured. Results of the study showed that there was no significant difference between Ridge and Mound-till. The Ridge-till and Mound-till systems significantly influenced plant height, stem girth, number of leaves, tuber weight and total yield of cassava than No-till system, hence were recommended of increased yield of cassava in the study area.

The Effect of Different Growing Media on Physical Morphology of Rockmelon (Cucumis Melo Linn cv. Glamour) Seedling

2021 ◽  
Vol 1 (1) ◽  
pp. 17-24
Author(s):  
Muhammad Nasrul Hazzeem Ab Rauf ◽  
Shafeeqa Shahruddin
Keyword(s):  
Plant Height ◽  
Rice Husk ◽  
Cucumis Melo ◽  
Black Soil ◽  
Growing Media ◽  
Number Of Leaves ◽  
Soilless Cultivation ◽  
Set Up ◽  
Cucumis Melo L ◽  
Cucurbitaceae Family

Rockmelon (Cucumis melo L.) belongs to the Cucurbitaceae family, which can adapt to various soil and climate areas, especially in Malaysia. The production of rockmelon in Malaysia has highly declined, and for this reason, farmers have opted to use the concept of soilless cultivation due to it benefits accrued from soilless media such as cocopeat, perlite, and burnt rice husk. The study was carried out to determine the effect of different growing media on the physical morphology of rockmelon seedlings. This experiment was set up using RCBD arrangements with four replications. Different growing media used were: (i) 100% Black Soil (BS), (ii) 75% cocopeat + 15% burnt rice husk + 10% perlite (M1) and (iii) 75% cocopeat + 20% burnt rice husk + 5% perlite (M2). The parameters measured were plant height, number of leaves and total leaves area, and stem girth. The data were collected within two weeks after transplanting. The parameters measured were subjected to ANOVA and LSD was applied to compare means. In this study, rockmelon seedlings treated on BS showed significantly (P<0.001) the highest plant height, number of leaves per plant, and total leaves area and stem girth. Seedlings on soilless M1, however, grew in slightly good conditions, as it showed the insignificantly higher values on morphological parameters measured. Thus, BS is still suitable for better use of media for 15 days old rockmelon seedlings (after transplanting). It gives the optimum conditions for adapting seedlings to the new exposure environment.

scholarly journals Effect of Nitrogen on Growth and Yield of Sorghum Forage (Sorghum Bicolor ( L.) Moench Cv.) under Three Cuttings System

2012 ◽  
Vol 45 (4) ◽  
pp. 57-64 ◽  
Author(s):  
M. Afzal ◽  
A. Ahmad ◽  
Au.H. Ahmad
Keyword(s):  
Sorghum Bicolor ◽  
Plant Height ◽  
Growth Parameters ◽  
Block Design ◽  
Plant Population ◽  
Growth And Yield ◽  
Significant Difference ◽  
Number Of Leaves ◽  
Growth Attributes ◽  
Sorghum Bicolor L

Abstract A field experiment was conducted on sorghum (Sorghum bicolor (L.) Moench cv.) under three cutting system to determine the effect of nitrogen on growth and yield at University of Agriculture Faisalabad, Pakistan, during the season 2010-2011. The experiment was laid out in Randomized Complete Block Design (RCBD), using three replications. There were four levels of nitrogen 0, 50, 75 and 100 kg N/acre in the form of urea. The growth parameters like plant height, number of leaves, leaf area is determined periodically. First reading taken after 20 days of sowing while second and third was taken after 15 days of first cutting. Yield parameter like plant population, fresh and dry weight was determined in three cuttings. Results showed that increasing nitrogen dose increased all growth attributes. Results revealed for first, second and third cuttings showed significant differences at all growth attributes. Thus, the maximum plant height was observed in N4 (100 kg N/acre), having plant height 193.92, 195.24 and 192.79 cm in first, second and third cutting, respectively, which was followed by the treatment N3 (75 kg N/acre), having 179.70 cm in first cutting, while second and third cutting have same plant height 168.62 cm. The exception was the plant population showed non significant behavior in second and third cutting while number of leaves per plant in second cutting only and protein % in third cutting showed non significant difference with nitrogen application.

scholarly journals Effectiveness of integrated nutrient management on growth and yield parameters of okra (Abelmoschus esculentus L.)

2020 ◽  
Vol 4 (2) ◽  
pp. 41-48
Author(s):  
Masud Rana ◽  
Md Morshedul Islam ◽  
Md Atiqur Rahman Bhuiyan
Keyword(s):  
Plant Height ◽  
Nutrient Management ◽  
Block Design ◽  
Fruit Weight ◽  
Abelmoschus Esculentus ◽  
Growth And Yield ◽  
Fruit Length ◽  
Yield Parameters ◽  
Number Of Leaves ◽  
Fruit Diameter

Integrated use of organic and inorganic fertilizers could improve both growth and yield of okra plant. The present study was carried out to evaluate the effect of organic and inorganic fertilizer on growth and yield parameters of okra (Abelmoschus esculentus L.) at experimental area of Noakhali Science and Technology University, Bangladesh during the period of 18th December, 2018 to 19th March, 2019 (Rabi season). In this experiment, “Arka Anamika” variety of okra was used. The experiment was laid out in Randomized Complete Block Design (RCBD) with four treatments viz. T1= INM (organic and inorganic), T2= Inorganic (NPK), T3= Organic (cowdung), T4= Control and three replications. Data were taken on the growth and yield parameters such as plant height (cm), number of leaves per plant, number of branches per plant, days to first flowering (days), number of fruit per plant, individual fruit weight (gm), fruit length (cm) and fruit diameter (cm). Among all treatments INM (organic and inorganic) was responsible for highest plant height (49.96 cm), maximum number of leaves per plant (22.33) and branches per plant (6.33), accelerated days to first flowering (39 days), increases the number of fruit per plant (14.33), individual fruit weight (24.89 gm), fruit length (15.5 cm) and fruit diameter (1.98 cm). So this study clearly indicated that, among all treatments INM (Organic and inorganic) performed the best and it will be suitable for okra production. Asian Australas. J. Food Saf. Secur. 2020, 4 (2), 41-48

scholarly journals Effects of Tin Mine Tailings on the Growth and Development of Common Bean (Phaseolus vulgaris L.) in Jos, Nigeria

2019 ◽  
pp. 1-7
Author(s):  
A. D. Ali ◽  
S. Habila ◽  
N. C. Isiwu ◽  
K. J. Osaji ◽  
D. D. Nyam
Keyword(s):  
Phaseolus Vulgaris ◽  
Common Bean ◽  
Plant Height ◽  
Mine Tailings ◽  
Block Design ◽  
Growth And Yield ◽  
Phaseolus Vulgaris L ◽  
Significant Difference ◽  
Number Of Leaves ◽  
Number Of Seeds

Aims: To study the effects of mine tailings on the growth and yield of two genotypes of common bean (Phaseolus vulgaris L.). Study Design: The experiment was laid in a Randomized Complete Block Design (RCBD) with four treatments, two blocks and each block was replicated three times. Place and Duration of Study: Botanical Garden, Department of Plant Science and Biotechnology University of Jos, Plateau State, Nigeria during the rainy season in a field experiment in 2014. Methodology: The mine tailings combinations include four different additions mine tailings soil {(T0) 0 kg as control, (T1) 2 kg, (T2) 3 kg, (T3) 4 kg} and the respective mine tailings soils were added to 6.3 kg of normal soil. Two common bean accessions were used (Cranberry-G1 and Pinto-G2), which gave the total of eight treatment combinations (T0G1, T0G2, T1G1, T1G2, T2G1, T2G2, T3G1, T3G2). Results: The control recorded significant higher mean plant height (cm), number of leaves and number of trifoliate leaves, number of pods and number of seeds per pod in both genotypes for all the different weeks after planting (WAP). A significant decrease in plant height, number of trifoliate leaves, number of leaves per plant, number of pods and number of seeds per pod in both genotypes were observed with increased levels of mine tailings. There was a significant increase in time to 50% flower and 50% pod production (P = 0.01) over the control which increased with increasing levels of mine tailings. The genotypes exhibited no significant difference (P = 0.05) for most traits accessed, except for number of pod per plant. It is evident from the findings that Cranberry is more tolerant to heavy metals contamination in soil, perhaps may be more suitable for planting in such mining soils. Conclusion: The study showed that inclusion of mine tailings had detrimental effect on both the growth and yield of common bean.

Sign in / Sign up

Export Citation Format

Share Document