scholarly journals ANALISIS PENGENDALIAN BAHAN BAKU JASA MAKLON DENGAN MENGGUNAKAN METODE EOQ (ECONOMIC ORDER QUALITY) BERBASIS BIG DATA LOGISTIK GUNA MEMINIMALISIR BIAYA PRODUKSI PADA PT BARATA INDONESIA (PERSERO)

2018 ◽  
Vol 15 (2) ◽  
pp. 138-162
Author(s):  
Dina Eka Shofiana ◽  
Dwi Novita Sari
Keyword(s):  
Big Data ◽  
Production Cost ◽  
Raw Materials ◽  
Production Costs ◽  
Raw Material ◽  
Silica Sand ◽  
Economic Order ◽  
The Cost

This study aims to determine the control of raw materials by using EOQ (Economic Order Quality) method to minimize production costs in PT Barata Indonesia (Persero). This research uses Adeskriptif with qualitative approach.The results of this study indicate that the control of raw materials using the EOQ (Economic Order Quallity) method can minimize production costs in PT Barata Indonesia (Persero) as follows: Silica Sand raw material can minimize production cost of Rp 16,321,500. Fero Silicon minimize the production cost of Rp 7,520,550,000, the raw material of Fero Mangan Mc can minimize the cost of Rp 2,255,625,000, the raw material of Fero Mangan Hc can minimize the cost of Rp 1.098,600. the raw material of Scrap can minimize the cost of Rp 324,995,000.

scholarly journals CALCULATION OF PRODUCTION COST IN UD. USAHA BARU WITH FULL COSTING METHOD

2019 ◽  
Vol 4 (1) ◽  
pp. 28-42
Author(s):  
Suprianto Suprianto ◽  
Bina Andari ◽  
Yely Sulistyawati
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Analysis Data ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Other Information ◽  
Cost Of Production ◽  
The Cost

This study aims to evaluate the calculation of cost of production. The accuracy of the calculation of cost of production is influenced by the suitability in the accumulation and calculation of production costs which includes the cost of raw materials, direct labor costs and other costs (factory overhead costs). This research was conducted at UKM UD. Usaha Baru which aims to determine the calculation of cost of production at UD. Usaha Baru and to find out whether the calculation of cost of production is in accordance with the full costing method. The technique (method) of data analysis used in this study is quantitative analysis. Data collection techniques use interview techniques directly to obtain information from the number of units of monthly production, raw material costs, direct labor costs, and factory overhead costs, as well as other information relating to the calculation of cost of production. Based on the evaluation results for the calculation of raw material costs and labor costs are in accordance with the full costing method. However, the calculation of factory overhead costs is not in accordance with the full costing method because there are costs that have not been included in the calculation of production costs.

EVALUASI PENERAPAN METODE JOB ORDER COSTING DALAM PENENTUAN HARGA POKOK PRODUKSI (Studi Kasus pada PT. Organ Jaya)

2019 ◽  
Vol 7 (01) ◽  
pp. 47
Author(s):  
Jeffry .
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Production Costs ◽  
Raw Material ◽  
Accurate Information ◽  
Labor Costs ◽  
Overhead Cost ◽  
Cost Of Production ◽  
Production Calculation ◽  
The Cost

PT . Jaya organ producing products based on orders received from customers , and therefore in determining the cost of production of PT . Jaya organs using job order costing. Production cost consists of raw material costs , direct labor costs and factory overhead costs. For the calculation of the cost of raw materials PT . Organ jaya calculate based on the existing formula , but for the cost of direct labor and factory overhead costs PT . Jaya organs not calculate accurately match the job order costing method . Both the cost is calculated based on the rates , so the cost of direct labor and factory overhead costs are absorbed by the product orders can not be calculated specifically. With job order costing method , PT . Organ Jaya will easily find the cost of production for each order , because in the calculation of the cost of production is not affected by the initial inventory of final goods as well as ordered , then the cost of production is the basis for determining the cost of production . Calculation of cost of production is carried out by PT . Jaya organ still manually so that the resulting lack of accurate information , in this case PT . Jaya organs not use time sheet and job cost ticket as a medium in the calculation of production costs in order to determine the cost of production . Keyword : Job order costing-overhead cost

scholarly journals Analisis dan Perancangan Aplikasi Berbasis Web untuk Pengelolaan Harga Pokok Produksi Menggunakan Metode Harga Pokok Proses

2019 ◽  
Vol 17 (2) ◽  
pp. 1
Author(s):  
Magdalena Karismariyanti
Keyword(s):  
Web Application ◽  
Production Cost ◽  
Raw Materials ◽  
Unit Cost ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Web Based ◽  
Cost Of Production ◽  
The Cost

Manufacturing of products incurred raw material costs, direct labor costs, and factory overhead   costs, which could be used to determine the price of the product sold.  On the contrary, the company, which manufactured thousands of toys and dolls monthly, did not have proper cost record. Production cost calculated by the average of total cost divided with a total of confirmed product. Hence, the production cost for each product could not be defined precisely. Based on the problems described, a web application was developed to manage the recording of transaction and automatically calculated the cost of production. This application's functionalities were able to manage purchasing activities, handing over raw materials to production, confirming finished goods, calculating production costs, posting journals and ledgers, and reporting of the cost of production. This application could help companies to calculate the unit cost. Based on a comparison between manual and application testing, it could be concluded that output in the application displayed an exact match from the manual. Thus, this web-based application was ready to be implemented in the company.

scholarly journals Pendampingan Peningkatan Efisiensi Biaya Produksi UMKM Heriyanto Melalui Analisis Biaya Kualitas

2020 ◽  
Vol 1 (1) ◽  
pp. 1-10
Author(s):  
Yulia Maulidyanti Rosdiana ◽  
Iriyadi Iriyadi ◽  
Diah Wahyuningsih
Keyword(s):  
Cost Efficiency ◽  
Production Cost ◽  
Raw Materials ◽  
Production Costs ◽  
Raw Material ◽  
Cost Component ◽  
Quality Cost ◽  
Quality Costs ◽  
The Cost

In each production process, it is possible there will be a discrepancy between the product that has been produced and with the standard, which referred to a defective product or a damaged product. The defective product or damaged product will affect the increase in production costs because the defective product has absorbed production costs from the beginning and it can cause losses to the company. Thus the company must make quality improvements to make the quality of the products produced more consistent and so that there are no more defective products. Improvement of this quality is needed by the existence of expenditure which is called quality cost. Quality costs are part of the production costs. With the existence of defective products or damaged products, it will cause production costs to increase because the company must pay for the process of reworking or reproducing. Therefore, by improving quality through quality costs, it is expected that production costs will be reduced. Production processes that pay attention to quality will reduce the possibility of product defects. Thus the company's production costs will be more efficient but still pay attention to the quality of the products produced. The purpose of this report is to find out how to supervise quality costs of UMKM in improving production cost efficiency. The author conducts community service at the UMKM Heriyanto which is a UMKM engaged in the shoe industry, especially adult women's shoes located on Jl. E. Sumawijaya, Sindang Barang Village, Gang Jambekiuna, Pasir Eurih Village, Taman Sari District, Bogor Regency.The results of the study show that the quality cost component found in the UMKM Heriyanto consists of prevention costs, internal failure costs, and external failure costs. In UMKM Heriyanto there is no apprasial cost because there is no quality control or checking activity for the product. In addition, the calculation of production costs in UMKM Heriyanto is quiet basic and simple because it does not separate the cost of direct raw materials from indirect raw materials, direct labor with indirect labor, and there are some overhead costs that are not taken into account. Internal failure costs consisting of excess raw materials have a significant influence on the cost of producing shoes for UMKM Heriyanto for all types of shoes. Thus the excess of this raw material must be reduced because it can affect the amount of raw material costs directly on production costs. If UMKM Heriyanto can implement the calculation of this quality cost, then in the next production it can reduce the cost of excess raw materials and UMKM Heriyanto can make production cost efficiency of 15%.                                               Keywords: qualitycosts, production cost, cost effieciency

SELISIH BIAYA PRODUKSI SEBAGAI ALAT PENGENDALIAN MANAJEMEN PT INDO PUSAKA BERAU

2019 ◽  
Vol 3 (02) ◽  
pp. 397
Author(s):  
SAFITRI NURHIDAYATI ◽  
RIZKI AMELYA SYAM
Keyword(s):  
Raw Materials ◽  
Field Research ◽  
Analytical Tool ◽  
Production Costs ◽  
Raw Material ◽  
Labor Costs ◽  
Material Costs ◽  
Library Research ◽  
The Difference ◽  
The Cost

This study aims to analyze whether the difference that occurs in the cost of raw materials, direct labor, and factory overhead costs between the standard costs and the actual costs in PLTU LATI is a difference that is favorable or unfavorable. Data collection techniques with field research and library research. The analytical tool used is the analysis of the difference in raw material costs, the difference in direct labor costs and the difference in factory overhead costs. The hypothesis in this study is that the difference allegedly occurs in the cost of raw materials, direct labor costs, and factory overhead costs at PT Indo Pusaka Berau Tanjung Redeb is a favorable difference. The results showed that the difference in the cost of producing MWh electricity at PT Indo Pusaka Berau Tanjung Redeb in 2018, namely the difference in the price of raw material costs Rp. 548,029.80, - is favorable, the difference in quantity of raw materials is Rp. 957,216,602, - is (favorable) , the difference in direct labor costs Rp 2,602,642,084, - is (unfavorable), and the difference in factory overhead costs Rp 8,807,051,422, - is (favorable) This shows that the difference in the overall production cost budget is favorable or profitable. This beneficial difference shows that the company is really able to reduce production costs optimally in 2018.  

scholarly journals The effect of changes in opportunity costs and prices of some agricultural products such as sugar beet, corn,wheat etc. used for bioethanol production on the cost of bioethanol production is not adequately known in Turkey.. Therefore, it was aimed to determine the bioethanol production cost items and unit production costs and also to put forth the effects of variations in raw material prices on cost of bioethanol.. The research data were collected via personal interviews from active bioethanol plants in Turkey. The results of previous studies and documents of related institutions and organizations were also used. The study followed classical cost analysis approach to calculate production cost. Scenario analysis was performed when exploring the effect of raw material prices on bioethanol production cost. Research findings showed that production cost per litre bioethanol produced from sugar beet molasses, corn, wheat and corn-wheat mixture were 2.50 TL, 2.84 TL, 2.95 and 2.84 TL, respectively. The share of raw material expenses in bioethanol cost per liter varied associated with the crops used in the process, it was 28.55% for bioethanol produced from sugar beet molasses, 44.81% for bioethanol produced from corn-wheat mixture and 44.87% bioethanol produced from corn. The research results also showed that the changes that occur in raw material prices significantly affected the bioethanol production cost and opportunity cost of crops created difficulties in biomass supply. Implementing the suitable policies and strategies and making the necessary arrangements in legislation would enhance the economic sustainability of bioethanol production in Turkey.

2017 ◽  
Vol 32 (1) ◽  
pp. 16-16
Author(s):  
Selime Canan ◽  
Vedat Ceyhan
Keyword(s):  
Sugar Beet ◽  
Production Cost ◽  
Agricultural Products ◽  
Production Costs ◽  
Raw Material ◽  
Bioethanol Production ◽  
Beet Molasses ◽  
Sugar Beet Molasses ◽  
Research Findings ◽  
The Cost

scholarly journals Nilai Tambah Produk Olahan Jahe Merah pada UD. VisionBali Herbal Indonesia, Denpasar

2017 ◽  
Author(s):  
ARIEF SETIAWAN ROSO ◽  
I KETUT SUAMBA ◽  
NI WAYAN PUTU ARTINI
Keyword(s):  
Production Process ◽  
Raw Materials ◽  
Production Costs ◽  
Raw Material ◽  
Added Value ◽  
Chemical Components ◽  
Red Ginger ◽  
The Cost ◽  
Product Output

The Added Value of Processed Red Ginger Product at UD. VisionBali Herbal Indonesia, DenpasarThis research aimed to determine the added value of red ginger as an herbal drink in one production process and to determine the level of profits earned by the company in the red ginger processing in one production process. Determination of the study area was done purposively and the analytical methods used was the method of added value calculation, i.e. the product value is deducted by the value of raw materials and other supporting materials.It can be concluded from the result of the research that the added value of the red ginger processing business obtained in one production process is Rp. 84.600,00/kg. The added value is obtained from the deduction of the value of the product/output of Rp. 175.000,00/kg with the cost of raw material (input prices) Rp. 25.000,00/kg and the contribution of the cost of other inputs of Rp. 65.400,00/kg. It was also found that the profits gained by the manufacturer from the processed red ginger into herbal drink in one production process was Rp. 200.954,06. The suggestion that can be given to the company is to put more attention in the details of its production costs so as not to result in a low ratio of added value and further to improve the marketing of the products, so that people are interested in re-use of herbal medicine that is free of chemical components.

OPTIMALISASI PENGADAAN BAHAN BAKU DALAM RANGKA MEMINIMALKAN TOTAL BIAYA PERSEDIAAN TEMBAKAU PADA PT BENTOEL INTERNATIONAL INVESTAMA DI MALANG

2019 ◽  
Vol 2 (1) ◽  
pp. 23
Author(s):  
Dwi Dayanti Oktavia ◽  
Peni Indarwati ◽  
Marhaerni Fikky Febriananta
Keyword(s):  
Production Process ◽  
Raw Materials ◽  
Cost Savings ◽  
Optimal Level ◽  
Raw Material ◽  
Economic Order Quantity ◽  
Economic Order ◽  
Order Quantity ◽  
Total Cost ◽  
The Cost

A company should maintain an adequate or optimal level of inventory so that production operations can run smoothly and efficiently. What needs to be considered in this case is that the required raw materials are always available, so as to guarantee the smooth production process. However, the amount of inventory should not be too much because this will harm the company. Too much inventory will increase maintenance costs and storage costs in the warehouse. In addition, the amount of inventory that is too much can also increase the likelihood of losses due to damage and loss of quality that can reduce company profits. And vice versa, the amount of inventory that is too small will hamper the production process so that the company will suffer a lot of losses including: the machine does not work as it should, many workers are unemployed, and can even result in the cessation of the production process. This study aims to determine how the calculation of raw materials, what is the total cost of raw material inventory if the company establishes an EOQ (Economic Order Quantity) policy, what is the limit or point of ordering raw materials needed by the company during the grace period at PT.Bentoel International Investama in Malang.The population used is the supply of tobacco raw materials at PT. Bentoel International Investama, where this research was conducted by interview and documentation. The variable in this study is the supply of raw materials. The analysis used is the EOQ (Economic Order Quantity) method.The results of the study, if using the EOQ method in 2017 the cost savings of Rp 40,290,256,931, while in 2018 the cost savings of Rp. 44,388,428,549. Thus there is a difference between inventory policies carried out according to the company with EOQ calculations. It can be concluded that the supply of raw materials every year has increased raw materials, the frequency of purchasing raw materials when using raw materials when using the EOQ method is 2 times in one period, the limit for ordering raw materials needed by companies when using the 2017 EOQ method is 218,176.7 kg, while in 2018 it will be 210,853 kg. The total cost of raw material inventory calculated according to EOQ is less than that spent by the company, so there is a cost savings of raw material inventory

scholarly journals ANALISIS PERBANDINGAN PERHITUNGAN HARGA POKOK PRODUKSI MENGGUNAKAN METODE FULL COSTING DAN VARIABLE COSTING UNTUK MENENTUKAN LABA BERSIH PT. BHASKARA MADYA JAYA

2020 ◽  
Vol 1 (1) ◽  
pp. 212-218
Author(s):  
Nia Agustin Pratama ◽  
Teguh Purwanto
Keyword(s):  
Raw Materials ◽  
Production Costs ◽  
Raw Material ◽  
Fixed Costs ◽  
Net Income ◽  
Labor Costs ◽  
Net Profit ◽  
Operational Activities ◽  
Data Collection Technique ◽  
The Cost

With the addition of profits, the company can pay all costs that are sacrificed, so that the company's operational activities are guaranteed and can run well. The problems examined in this study are intended to find out how the comparison of recording costs using the full costing method and variable costing affects the net profit of PT Bhaskara Madya Jaya. Both of these methods simultaneously involve raw materials, direct labor costs and factory overhead costs. What distinguishes the full costing method using fixed factory overhead loads and variable, if the variable costing only adds to the variable overhead load. Production costs that are not included in the raw material and direct labor costs are the overhead of the manufacturing plant itself. Descriptive method with a quantitative approach is the model of this research. With the use of saturated sampling. Documentation is a data collection technique that researchers use. The results of the study and details obtained by comparing the full costing method and variable costing. In detailing the cost of production, the full costing method produced a greater than the costing variable, this is due to the full costing method adding all the elements of costs, variable costs or fixed costs . Then from the results of the breakdown of net income, using the full costing method, the nominal profit is found to be far less than using the variable costing method.

scholarly journals Analisis Perhitungan Dan Penentuan Harga Pokok Produksi Pada PT. Mutifa Medan

2019 ◽  
Vol 2 (1) ◽  
pp. 12
Author(s):  
John Fisher Gulo ◽  
Kamil Mustafa ◽  
Ninny Siregar
Keyword(s):  
Production Cost ◽  
Raw Materials ◽  
Descriptive Analysis ◽  
Production Costs ◽  
Total Production ◽  
Labor Costs ◽  
Average Production ◽  
Qualitative Descriptive ◽  
Cost Of Production ◽  
The Cost

<p>The cost of production is needed to determine the cost of production of a product. Costs incurred to produce the product must be clear, so that the determination of the cost of production would be appropriate. Imprecision in calculating the cost of production will be misleading in making management decisions. Data collection methods used in this study include: Documentation, Interview, Observation. This study analyzed using qualitative descriptive analysis comparing the theory with actual results of the company. PT MUTIFA in determining the cost of production using the full costing method. PT MUTIFA in determining the cost of production, all costs incurred are treated as production costs, both the cost of major raw materials, cost of auxiliary materials, packaging materials costs and production overhead. Classification of production costs in accordance with the theory that exists is composed of material costs, labor costs and production overhead costs. Total production cost per month of each element calculation the average monthly cost is Rp. 73.111.118,260,- and the average number of finished products Paracetamol tablet 500 mg tablet is as much 566,666.67 per month. Based on data on average production costs in 2009, then the production cost per tablet is .Rp. 129,019.</p>

Sign in / Sign up

Export Citation Format

Share Document