scholarly journals Development of Conceptual Design for Electric Bus Body Structure Using Simple Structural Surface Method

2021 ◽  
Vol 4 (1) ◽  
pp. 22-28
Author(s):  
Ismoyo Haryanto ◽  
◽  
Achmad Widodo ◽  
Ibrahim Satya ◽  
Gunawan Dwi Haryadi ◽  
...  
Keyword(s):  
Conceptual Design ◽  
Early Stage ◽  
Body Structure ◽  
Stage Of Development ◽  
Surface Method ◽  
Electric Bus ◽  
Vehicle Structure ◽  
Structural Surface ◽  
Bus Body ◽  
Method Model

An optimum design for a vehicle structure is always desired because the structure can significantly affect the vehicle's performance. However, some complex iterations are usually involved in the designing process. The objective of the present study is to implement the Simple Structural Surfaces (SSS) method for analyzing electric bus body structure that can reduce complexity in the stage of conceptual design. The SSS method model the vehicle structure as several planar sheets and determine the forces in each sheet. Implementing the SSS method at the early stage of the vehicle's development can minimize the number of parameter changes needed during the late stage of development. The results showed that compared with the results obtained from FEM, the SSS method gave the maximum stress value on the chassis in good accordance. Yet, the downside of using this method is that determining the deflections in the structure becomes a little bit complicated. Successfully implementing this strategy can reduce the time and cost required to develop an effective vehicle structure.

Using the Simple Structural Beam (SSB) Model to Optimize and Analyze Automotive Structures for Bending Stiffness and Natural Frequency

2014 ◽  
Author(s):  
Ian Wood ◽  
Ahmad Barari ◽  
Ebrahim Esmailzadeh
Keyword(s):  
Natural Frequency ◽  
Early Stage ◽  
Dynamic Properties ◽  
Weight Ratio ◽  
Bending Stiffness ◽  
Beam Model ◽  
Beam Elements ◽  
Fundamental Natural Frequency ◽  
Stage Of Development ◽  
Vehicle Structure

When designing a vehicle structure, an optimum design is desired because the structure has a significant impact on its performance. The structure impacts other components in the vehicle as well. The designing process usually involves complex iteration. Analyses must be done at the early stage of the vehicle’s development (body-in-white) to minimize the amount of parameter changes needed during the late stage of development. Successfully implementing this strategy reduces the time and cost required to develop an effective vehicle structure. A method known as Simple Structural Surfaces can be used to model the vehicle structure as several planar sheets, as well as determine the forces in each sheet. The downside of using this method is that by using it, determining the deflections in the structure is difficult. In order to eliminate this difficulty, the vehicle is modeled as several beam elements instead. In this method, a finite element method is used to numerically solve for the deflections, reaction forces, and internal loading on each element of the structure. This Simple Structural Beam model can be adapted to allow optimization of the static property of the structure bending stiffness. Dynamic properties of the vehicle structure are also examined through vibration analysis, by determining the fundamental natural frequency of the structure. Vibration also has a large impact on the structure’s performance. The goal of the research is to obtain a design that will optimize the static and dynamic properties of the vehicle’s structure. In the beam elements, the parameters involved are the length, orientation, cross-sectional area, and moment of inertia. The optimizing process is automated and determines the beam dimensions with largest stiffness to weight ratio. The fundamental natural frequency calculated must be distant from the frequency of the engine, as resonance is also a concern for structural performance. Resonance occurs when the natural frequency of the system is equal to the frequency of a connecting component. This increases the amplitude of vibration significantly and is undesirable for any structural design.

The Application of UX Research in New Energy Vehicle Innovation

2019 ◽  
Vol 1 (1) ◽  
Author(s):  
Menghan TAO ◽  
Ning XIAO ◽  
Xingfu ZHAO ◽  
Wenbin LIU
Keyword(s):  
Early Stage ◽  
Rapid Expansion ◽  
The Other ◽  
Innovative Product ◽  
Stage Of Development ◽  
New Energy ◽  
New Energy Vehicle ◽  
The One ◽  
New Energy Vehicles ◽  
Degree Of Innovation

New energy vehicles(NEV) as a new thing for sustainable development, in China, on the one hand has faced the rapid expansion of the market; the other hand, for the new NEV users, the current NEVs cannot keep up with the degree of innovation. This paper demonstrates the reasons for the existence of this systematic challenge, and puts forward the method of UX research which is different from the traditional petrol vehicles research in the early stage of development, which studies from the user's essence level, to form the innovative product programs which meet the needs of users and being real attractive.

scholarly journals Learning health systems in primary care: a systematic scoping review

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Danielle M. Nash ◽  
Zohra Bhimani ◽  
Jennifer Rayner ◽  
Merrick Zwarenstein
Keyword(s):  
Primary Care ◽  
Quality Improvement ◽  
Health Systems ◽  
Scoping Review ◽  
Early Stage ◽  
Point Of Care ◽  
The United States ◽  
Stage Of Development ◽  
Integrated Health ◽  
Google Search

Abstract Background Learning health systems have been gaining traction over the past decade. The purpose of this study was to understand the spread of learning health systems in primary care, including where they have been implemented, how they are operating, and potential challenges and solutions. Methods We completed a scoping review by systematically searching OVID Medline®, Embase®, IEEE Xplore®, and reviewing specific journals from 2007 to 2020. We also completed a Google search to identify gray literature. Results We reviewed 1924 articles through our database search and 51 articles from other sources, from which we identified 21 unique learning health systems based on 62 data sources. Only one of these learning health systems was implemented exclusively in a primary care setting, where all others were integrated health systems or networks that also included other care settings. Eighteen of the 21 were in the United States. Examples of how these learning health systems were being used included real-time clinical surveillance, quality improvement initiatives, pragmatic trials at the point of care, and decision support. Many challenges and potential solutions were identified regarding data, sustainability, promoting a learning culture, prioritization processes, involvement of community, and balancing quality improvement versus research. Conclusions We identified 21 learning health systems, which all appear at an early stage of development, and only one was primary care only. We summarized and provided examples of integrated health systems and data networks that can be considered early models in the growing global movement to advance learning health systems in primary care.

scholarly journals Open Research Data and Open Peer Review: Perceptions of a Medical and Health Sciences Community in Greece

Publications ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 14
Author(s):  
Eirini Delikoura ◽  
Dimitrios Kouis
Keyword(s):  
Peer Review ◽  
Evaluation System ◽  
Early Stage ◽  
Open Science ◽  
Health Sciences ◽  
Research Data ◽  
Stage Of Development ◽  
Open Research ◽  
Proper Training ◽  
To Receive

Recently significant initiatives have been launched for the dissemination of Open Access as part of the Open Science movement. Nevertheless, two other major pillars of Open Science such as Open Research Data (ORD) and Open Peer Review (OPR) are still in an early stage of development among the communities of researchers and stakeholders. The present study sought to unveil the perceptions of a medical and health sciences community about these issues. Through the investigation of researchers` attitudes, valuable conclusions can be drawn, especially in the field of medicine and health sciences, where an explosive growth of scientific publishing exists. A quantitative survey was conducted based on a structured questionnaire, with 179 valid responses. The participants in the survey agreed with the Open Peer Review principles. However, they ignored basic terms like FAIR (Findable, Accessible, Interoperable, and Reusable) and appeared incentivized to permit the exploitation of their data. Regarding Open Peer Review (OPR), participants expressed their agreement, implying their support for a trustworthy evaluation system. Conclusively, researchers need to receive proper training for both Open Research Data principles and Open Peer Review processes which combined with a reformed evaluation system will enable them to take full advantage of the opportunities that arise from the new scholarly publishing and communication landscape.

scholarly journals Primary Care Networks and Starfield’s 4Cs: A Case for Enhanced Chronic Disease Management

2021 ◽  
Vol 18 (6) ◽  
pp. 2926
Author(s):  
Chuan De Foo ◽  
Shilpa Surendran ◽  
Geronimo Jimenez ◽  
John Pastor Ansah ◽  
David Bruce Matchar ◽  
...  
Keyword(s):  
Primary Care ◽  
Chronic Disease ◽  
Disease Management ◽  
Chronic Disease Management ◽  
Early Stage ◽  
Healthcare Delivery ◽  
Stage Of Development ◽  
Facilitators And Barriers ◽  
Design Options ◽  
First Contact

The primary care network (PCN) was implemented as a healthcare delivery model which organises private general practitioners (GPs) into groups and furnished with a certain level of resources for chronic disease management. A secondary qualitative analysis was conducted with data from an earlier study exploring facilitators and barriers GPs enrolled in PCN’s face in chronic disease management. The objective of this study is to map features of PCN to Starfield’s “4Cs” framework. The “4Cs” of primary care—comprehensiveness, first contact access, coordination and continuity—offer high-quality design options for chronic disease management. Interview transcripts of GPs (n = 30) from the original study were purposefully selected. Provision of ancillary services, manpower, a chronic disease registry and extended operating hours of GP practices demonstrated PCN’s empowering features that fulfil the “4Cs”. On the contrary, operational challenges such as the lack of an integrated electronic medical record and disproportionate GP payment structures limit PCNs from maximising the “4Cs”. However, the enabling features mentioned above outweighs the shortfalls in all important aspects of delivering optimal chronic disease care. Therefore, even though PCN is in its early stage of development, it has shown to be well poised to steer GPs towards enhanced chronic disease management.

The magic bullet for rural development? Exploring the impacts of community telecenters in Bangladesh

2021 ◽  
pp. 026666692199750
Author(s):  
Noore Alam Siddiquee ◽  
Md Gofran Faroqi
Keyword(s):  
Service Delivery ◽  
Rural Areas ◽  
Early Stage ◽  
Rural Livelihoods ◽  
Value Added ◽  
Magic Bullet ◽  
Government Information ◽  
Individual Interviews ◽  
Stage Of Development ◽  
Marginalized Groups

This paper explores the impacts of Bangladesh’s Union Digital Centers (UDCs) as government information and service delivery hubs in rural areas. Drawing on user-surveys and semi-structured individual interviews it demonstrates that the UDCs have produced generally positive yet modest impacts on governance of service delivery. It shows that the UDCs are at an early stage of development, and that they offer only a limited set of services. While they helped extend ICT-enabled services to sections of population that would otherwise have missed them, the UDCs do not have much to do with rural livelihoods and empowerment of the poor and marginalized groups. These findings point to current inadequacies and pitfalls of the UDC approach to development. We argue that enhanced viability and effectiveness of the UDC experiment would warrant embedding more value-added governmental services and further strengthening of their capacity, mandate, and connectivity with government agencies at various levels, among others.

Targets, triggers, and directionality in non-local and local place assimilation in child and adult language

2014 ◽  
Vol 50 (3) ◽  
pp. 273-307
Author(s):  
Mi-Hui Cho ◽  
Shinsook Lee
Keyword(s):  
Longitudinal Study ◽  
Early Development ◽  
Early Stage ◽  
Decisive Role ◽  
Diary Study ◽  
Consonant Harmony ◽  
Stage Of Development ◽  
Place Assimilation ◽  
Korean Child ◽  
Non Local

Abstract Data collected from one Korean child in a longitudinal diary study present novel patterns of consonant harmony in that labials, coronals, and velars can be triggers and targets of both progressive and regressive non-local place assimilation in an early stage of development. The same child also shows some cases of local regressive place assimilation. In another study where 4 children's data were gathered from a naturalistic longitudinal study, local regressive place assimilation as well as conso-nant harmony is witnessed regardless of place features. In adult Korean, however, only coronal to labial/velar and labial to velar local regressive assimilation occurs. This paper argues that the non-local and local place assimilation is connected and shows that the connection can be accounted for in terms of different constraint rankings within the Optimality-theoretic framework. More specifically, it is shown that the Ident-Onset(place) constraint plays a decisive role even in the early stage of acquisition, unlike child English, accounting for the predominant regressive assimilation. Also, the Agree-Place constraint is exploded into two sub-constraints in Stage 3, capturing the asymmetrical behavior of assimilation. Further, the unranking of place features in early development gradually evolves to the fixed ranking which reflects the universal markedness hierarchy in adult Korean.

Genera coelomycetarum. I. Urohendersonia

1971 ◽  
Vol 49 (11) ◽  
pp. 1853-1862 ◽  
Author(s):  
T. R. Nag Raj ◽  
Bryce Kendrick
Keyword(s):  
Early Stage ◽  
Type Material ◽  
Stage Of Development

Study of type material of Urohendersonia platensis, U. indica, and U. stipae reveals that structures described by their original authors as ‘basidia’ or ‘pedicels’ (in contemporary parlance, conidiophores) are, in fact, apical conidium appendages. The true conidiophores and the processes of conidiogenesis are described and illustrated. Urohendersonia has unilocular, ostiolate pycnidia producing three-septate, colored conidia that are enclosed from an early stage of development in a sheath which extends apically as a hyaline, filiform process. Urohendersonia and Hendersonia are delineated. Revised descriptions are given for Urohendersonia and its four species. A fifth species, U. mysorensis, is described as new. A key to the five species is given.

Sign in / Sign up

Export Citation Format

Share Document