scholarly journals Identifying the Potential of Qur’anic Recitation on the Proliferation of Chondrocytes Derived from Rabbit Articular Cartilage: Work in Progress

2018 ◽  
Vol 17 (1) ◽  
Author(s):  
Rosyafirah Hashim ◽  
Munirah Sha’ban ◽  
Sarah Rahmat ◽  
Zainul Ibrahim Zainuddin
Keyword(s):  
Tissue Engineering ◽  
Articular Cartilage ◽  
Profile Analysis ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
The Times ◽  
And Control ◽  
Rabbit Articular Cartilage

Introduction: In Islamic practice, the use of Qur’anic recitation in treatment can be traced back to the times of Prophet Muhammad (PBUH). This preliminary study aims to identify the potential of Qur’anic recitation of Surah Al-Fatihah on the proliferation of chondrocytes derived from rabbit articular cartilage. Cartilage tissue engineering offers an alternative way to facilitate cartilage regeneration in-vitro. Materials and Methods: The cellular model was established using a serially cultured and expanded chondrocytes in-vitro. The model was assigned into three groups. The first group was exposed to the Surah Al-Fatihah, recited 17 times based on the five times daily prayer unit (Raka’ah) obligated upon Muslims. The second group was exposed to an Arabic poem recitation. The third group was not exposed to any sound and served as the control. All groups were subjected to the growth profile analysis. The analysis was conducted at different passages starting from passage 0 to passage 3. Results: The results showed that the cells proliferation based on the growth kinetic analysis is higher for the cells exposed with Qur’anic recitation as compared to the Arabic poem and control groups. Conclusions: The proliferation process of the rabbit articular cartilage might be influenced with the use of Qur’anic recitation and as well as Arabic poem recitation. Exposure to the Western poem recitation and mute sound will be added for future study. It is hoped that this study could shed some light on the potential use of the Qur’anic recitation to facilitate cartilage regeneration in tissue engineering studies.

scholarly journals Chondrogenic Potential of Dental-Derived Mesenchymal Stromal Cells

Osteology ◽  
2021 ◽  
Vol 1 (3) ◽  
pp. 149-174
Author(s):  
Naveen Jeyaraman ◽  
Gollahalli Shivashankar Prajwal ◽  
Madhan Jeyaraman ◽  
Sathish Muthu ◽  
Manish Khanna
Keyword(s):  
Tissue Engineering ◽  
Mesenchymal Stromal Cells ◽  
Tissue Regeneration ◽  
Stromal Cells ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Dentin Matrix

The field of tissue engineering has revolutionized the world in organ and tissue regeneration. With the robust research among regenerative medicine experts and researchers, the plausibility of regenerating cartilage has come into the limelight. For cartilage tissue engineering, orthopedic surgeons and orthobiologists use the mesenchymal stromal cells (MSCs) of various origins along with the cytokines, growth factors, and scaffolds. The least utilized MSCs are of dental origin, which are the richest sources of stromal and progenitor cells. There is a paradigm shift towards the utilization of dental source MSCs in chondrogenesis and cartilage regeneration. Dental-derived MSCs possess similar phenotypes and genotypes like other sources of MSCs along with specific markers such as dentin matrix acidic phosphoprotein (DMP) -1, dentin sialophosphoprotein (DSPP), alkaline phosphatase (ALP), osteopontin (OPN), bone sialoprotein (BSP), and STRO-1. Concerning chondrogenicity, there is literature with marginal use of dental-derived MSCs. Various studies provide evidence for in-vitro and in-vivo chondrogenesis by dental-derived MSCs. With such evidence, clinical trials must be taken up to support or refute the evidence for regenerating cartilage tissues by dental-derived MSCs. This article highlights the significance of dental-derived MSCs for cartilage tissue regeneration.

scholarly journals The Application of Bioreactors for Cartilage Tissue Engineering: Advances, Limitations, and Future Perspectives

2021 ◽  
Vol 2021 ◽  
pp. 1-13
Author(s):  
Liwei Fu ◽  
Pinxue Li ◽  
Hao Li ◽  
Cangjian Gao ◽  
Zhen Yang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cell Culture ◽  
Articular Cartilage ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Future Perspectives ◽  
Mechanical Environment ◽  
Biomechanical Stimuli ◽  
Articular Cartilage Regeneration

Tissue engineering (TE) has brought new hope for articular cartilage regeneration, as TE can provide structural and functional substitutes for native tissues. The basic elements of TE involve scaffolds, seeded cells, and biochemical and biomechanical stimuli. However, there are some limitations of TE; what most important is that static cell culture on scaffolds cannot simulate the physiological environment required for the development of natural cartilage. Recently, bioreactors have been used to simulate the physical and mechanical environment during the development of articular cartilage. This review aims to provide an overview of the concepts, categories, and applications of bioreactors for cartilage TE with emphasis on the design of various bioreactor systems.

scholarly journals Adipose-Derived Mesenchymal Stem Cell Chondrospheroids Cultured in Hypoxia and a 3D Porous Chitosan/Chitin Nanocrystal Scaffold as a Platform for Cartilage Tissue Engineering

2020 ◽  
Vol 21 (3) ◽  
pp. 1004 ◽  
Author(s):  
Veronica Zubillaga ◽  
Ana Alonso-Varona ◽  
Susana C. M. Fernandes ◽  
Asier M. Salaberria ◽  
Teodoro Palomares
Keyword(s):  
Tissue Engineering ◽  
Articular Cartilage ◽  
Collagen Type ◽  
Porous Scaffold ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Type I ◽  
Low Oxygen ◽  
Porous Chitosan

Articular cartilage degeneration is one of the most common causes of pain and disability in middle-aged and older people. Tissue engineering (TE) has shown great therapeutic promise for this condition. The design of cartilage regeneration constructs must take into account the specific characteristics of the cartilaginous matrix, as well as the avascular nature of cartilage and its cells’ peculiar arrangement in isogenic groups. Keeping these factors in mind, we have designed a 3D porous scaffold based on genipin-crosslinked chitosan/chitin nanocrystals for spheroid chondral differentiation of human adipose tissue-derived mesenchymal stem cells (hASCs) induced in hypoxic conditions. First, we demonstrated that, under low oxygen conditions, the chondrospheroids obtained express cartilage-specific markers including collagen type II (COL2A1) and aggrecan, lacking expression of osteogenic differentiation marker collagen type I (COL1A2). These results were associated with an increased expression of hypoxia-inducible factor 1α, which positively directs COL2A1 and aggrecan expression. Finally, we determined the most suitable chondrogenic differentiation pattern when hASC spheroids were seeded in the 3D porous scaffold under hypoxia and obtained a chondral extracellular matrix with a high sulphated glycosaminoglycan content, which is characteristic of articular cartilage. These findings highlight the potential use of such templates in cartilage tissue engineering.

scholarly journals Coculture of hWJMSCs and pACs in Oriented Scaffold Enhances Hyaline Cartilage Regeneration In Vitro

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Yu Zhang ◽  
Shuyun Liu ◽  
Weimin Guo ◽  
Chunxiang Hao ◽  
Mingjie Wang ◽  
...  
Keyword(s):  
Stem Cells ◽  
Articular Cartilage ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Human Umbilical Cord ◽  
Cartilage Cells ◽  
Collagen Ii ◽  
Differentiation Status

Seed cells of articular cartilage tissue engineering face many obstacles in their application because of the dedifferentiation of chondrocytes or unstable chondrogenic differentiation status of pluripotent stem cells. To overcome mentioned dilemmas, a simulation of the articular cartilage microenvironment was constructed by primary articular cartilage cells (pACs) and acellular cartilage extracellular matrix- (ACECM-) oriented scaffold cocultured with human umbilical cord Wharton’s jelly-derived mesenchymal stem cells (hWJMSCs) in vitro. The coculture groups showed more affluent cartilage special matrix ingredients including collagen II and aggrecan based on the results of histological staining and western blotting and cut down as many pACs as possible. The RT-PCR and cell viability experiments also demonstrated that hWJMSCs were successfully induced to differentiate into chondrocytes when cultured in the simulated cartilage microenvironment, as confirmed by the significant upregulation of collagen II and aggrecan, while the cell proliferation activity of pACs was significantly improved by cell-cell interactions. Therefore, compared with monoculture and chondrogenic induction of inducers, coculture providing a simulated native articular microenvironment was a potential and temperate way to regulate the biological behaviors of pACs and hWJMSCs to regenerate the hyaline articular cartilage.

scholarly journals Effect of different aged cartilage ECM on chondrogenesis of BMSCs in vitro and in vivo

2020 ◽  
Vol 7 (6) ◽  
pp. 583-595
Author(s):  
Xiuyu Wang ◽  
Yan Lu ◽  
Wan Wang ◽  
Qiguang Wang ◽  
Jie Liang ◽  
...  
Keyword(s):  
Articular Cartilage ◽  
Current Knowledge ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Biological Properties ◽  
Cartilage Tissue ◽  
Before And After ◽  
Marrow Mesenchymal Stem Cells

Abstract Extracellular matrix (ECM)-based biomaterials are promising candidates in cartilage tissue engineering by simulating the native microenvironment to regulate the chondrogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) without exogenous growth factors. The biological properties of ECM scaffolds are primarily depended on the original source, which would directly influence the chondrogenic effects of the ECM materials. Despite the expanding investigations on ECM scaffolds in recent years, the selection of optimized ECM materials in cartilage regeneration was less reported. In this study, we harvested and compared the articular cartilage ECM from newborn, juvenile and adult rabbits. The results demonstrated the significant differences in the mechanical strength, sulphated glycosaminoglycan and collagen contents of the different aged ECM, before and after decellularization. Consequently, different compositional and mechanical properties were shown in the three ECM-based collagen hydrogels, which exerted age-dependent chondrogenic inducibility. In general, both in vitro and in vivo results suggested that the newborn ECM promoted the most chondrogenesis of BMSCs but led to severe matrix calcification. In contrast, BMSCs synthesized the lowest amount of cartilaginous matrix with minimal calcification with adult ECM. The juvenile ECM achieved the best overall results in promoting chondrogenesis of BMSCs and preventing matrix calcification. Together, this study provides important information to our current knowledge in the design of future ECM-based biomaterials towards a successful repair of articular cartilage.

scholarly journals Harnessing Biomechanics to Develop Cartilage Regeneration Strategies

2015 ◽  
Vol 137 (2) ◽  
Author(s):  
Kyriacos A. Athanasiou ◽  
Donald J. Responte ◽  
Wendy E. Brown ◽  
Jerry C. Hu
Keyword(s):  
Tissue Engineering ◽  
Articular Cartilage ◽  
Biochemical Characterization ◽  
Articular Chondrocytes ◽  
Lysyl Oxidase ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Main Function ◽  
Mechanical Stimuli

As this review was prepared specifically for the American Society of Mechanical Engineers H.R. Lissner Medal, it primarily discusses work toward cartilage regeneration performed in Dr. Kyriacos A. Athanasiou's laboratory over the past 25 years. The prevalence and severity of degeneration of articular cartilage, a tissue whose main function is largely biomechanical, have motivated the development of cartilage tissue engineering approaches informed by biomechanics. This article provides a review of important steps toward regeneration of articular cartilage with suitable biomechanical properties. As a first step, biomechanical and biochemical characterization studies at the tissue level were used to provide design criteria for engineering neotissues. Extending this work to the single cell and subcellular levels has helped to develop biochemical and mechanical stimuli for tissue engineering studies. This strong mechanobiological foundation guided studies on regenerating hyaline articular cartilage, the knee meniscus, and temporomandibular joint (TMJ) fibrocartilage. Initial tissue engineering efforts centered on developing biodegradable scaffolds for cartilage regeneration. After many years of studying scaffold-based cartilage engineering, scaffoldless approaches were developed to address deficiencies of scaffold-based systems, resulting in the self-assembling process. This process was further improved by employing exogenous stimuli, such as hydrostatic pressure, growth factors, and matrix-modifying and catabolic agents, both singly and in synergistic combination to enhance neocartilage functional properties. Due to the high cell needs for tissue engineering and the limited supply of native articular chondrocytes, costochondral cells are emerging as a suitable cell source. Looking forward, additional cell sources are investigated to render these technologies more translatable. For example, dermis isolated adult stem (DIAS) cells show potential as a source of chondrogenic cells. The challenging problem of enhanced integration of engineered cartilage with native cartilage is approached with both familiar and novel methods, such as lysyl oxidase (LOX). These diverse tissue engineering strategies all aim to build upon thorough biomechanical characterizations to produce functional neotissue that ultimately will help combat the pressing problem of cartilage degeneration. As our prior research is reviewed, we look to establish new pathways to comprehensively and effectively address the complex problems of musculoskeletal cartilage regeneration.

scholarly journals Articular cartilage tissue engineering with stem cells implanted onto nanoscaffolds and platelet-rich plasma

2017 ◽  
Vol 3 (3) ◽  
pp. 322
Author(s):  
Hadeer A. Abbassy ◽  
Laila M. Montaser ◽  
Sherin M. Fawzy
Keyword(s):  
Tissue Engineering ◽  
Stem Cells ◽  
Articular Cartilage ◽  
Soft Tissues ◽  
Platelet Rich Plasma ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Cartilage Defects ◽  
Great Promise

<p class="abstract">Musculoskeletal medicine targets both cartilage regeneration and healing of soft tissues. Articular cartilage repair and regeneration is primarily considered to be due to its poor regenerative properties. Cartilage defects due to joint injury, aging, or osteoarthritis have low self-repair ability thus they are most often irreversible as well as being a major cause of joint pain and chronic disability. Unfortunately, current methods do not seamlessly restore hyaline cartilage and may lead to the formation of fibro- or continue hypertrophic cartilage. Deficiency of efficient modalities of therapy has invited research to combine stem cells, scaffold materials and environmental factors through tissue engineering. Articular cartilage tissue engineering aims to repair, regenerate, and hence improve the function of injured or diseased cartilage. This holds great potential and has evoked intense interest in improving cartilage therapy. Platelet-rich plasma (PRP) and/or stem cells may be influential for tissue repair as well as cartilage regenerative processes.  A great promise to advance current cartilage therapies toward achieving a consistently successful modality has been held for addressing cartilage afflictions. The use of stem cells, novel biologically inspired scaffolds and, emerging nanotechnology may be the best way to reach this objective via tissue engineering. A current and emergent approach in the field of cartilage tissue engineering is explained in this review for specific application. In the future, the development of new strategies using stem cells seeded in scaffolds and the culture medium supplemented with growth factors could improve the quality of the newly formed cartilage<span lang="EN-IN">.</span></p>

scholarly journals Cartilage Tissue Engineering Approaches Need to Assess Fibrocartilage When Hydrogel Constructs Are Mechanically Loaded

2022 ◽  
Vol 9 ◽  
Author(s):  
Hamed Alizadeh Sardroud ◽  
Tasker Wanlin ◽  
Xiongbiao Chen ◽  
B. Frank Eames
Keyword(s):  
Tissue Engineering ◽  
Collagen Type ◽  
Hyaline Cartilage ◽  
Imaging Techniques ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Cartilage Tissue ◽  
Type I

Chondrocytes that are impregnated within hydrogel constructs sense applied mechanical force and can respond by expressing collagens, which are deposited into the extracellular matrix (ECM). The intention of most cartilage tissue engineering is to form hyaline cartilage, but if mechanical stimulation pushes the ratio of collagen type I (Col1) to collagen type II (Col2) in the ECM too high, then fibrocartilage can form instead. With a focus on Col1 and Col2 expression, the first part of this article reviews the latest studies on hyaline cartilage regeneration within hydrogel constructs that are subjected to compression forces (one of the major types of the forces within joints) in vitro. Since the mechanical loading conditions involving compression and other forces in joints are difficult to reproduce in vitro, implantation of hydrogel constructs in vivo is also reviewed, again with a focus on Col1 and Col2 production within the newly formed cartilage. Furthermore, mechanotransduction pathways that may be related to the expression of Col1 and Col2 within chondrocytes are reviewed and examined. Also, two recently-emerged, novel approaches of load-shielding and synchrotron radiation (SR)–based imaging techniques are discussed and highlighted for future applications to the regeneration of hyaline cartilage. Going forward, all cartilage tissue engineering experiments should assess thoroughly whether fibrocartilage or hyaline cartilage is formed.

scholarly journals Biological Evaluation of Acellular Cartilaginous and Dermal Matrixes as Tissue Engineering Scaffolds for Cartilage Regeneration

2021 ◽  
Vol 8 ◽  
Author(s):  
Yahui Wang ◽  
Yong Xu ◽  
Guangdong Zhou ◽  
Yu Liu ◽  
Yilin Cao
Keyword(s):  
Tissue Engineering ◽  
Quantitative Polymerase Chain Reaction ◽  
Cartilage Tissue Engineering ◽  
Cartilage Regeneration ◽  
Biological Evaluation ◽  
Cartilage Tissue ◽  
Histological Evaluation ◽  
Dermal Matrix ◽  
Large Animals

An acellular matrix (AM) as a kind of natural biomaterial is gaining increasing attention in tissue engineering applications. An acellular cartilaginous matrix (ACM) and acellular dermal matrix (ADM) are two kinds of the most widely used AMs in cartilage tissue engineering. However, there is still debate over which of these AMs achieves optimal cartilage regeneration, especially in immunocompetent large animals. In the current study, we fabricated porous ADM and ACM scaffolds by a freeze-drying method and confirmed that ADM had a larger pore size than ACM. By recolonization with goat auricular chondrocytes and in vitro culture, ADM scaffolds exhibited a higher cell adhesion rate, more homogeneous chondrocyte distribution, and neocartilage formation compared with ACM. Additionally, quantitative polymerase chain reaction (qPCR) indicated that expression of cartilage-related genes, including ACAN, COLIIA1, and SOX9, was significantly higher in the ADM group than the ACM group. Furthermore, after subcutaneous implantation in a goat, histological evaluation showed that ADM achieved more stable and matured cartilage compared with ACM, which was confirmed by quantitative data including the wet weight, volume, and contents of DNA, GAG, total collagen, and collagen II. Additionally, immunological assessment suggested that ADM evoked a low immune response compared with ACM as evidenced by qPCR and immunohistochemical analyses of CD3 and CD68, and TUNEL. Collectively, our results indicate that ADM is a more suitable AM for cartilage regeneration, which can be used for cartilage regeneration in immunocompetent large animals.

Sign in / Sign up

Export Citation Format

Share Document