scholarly journals PERANCANGAN SISTEM MONITORING DAN KONTROLING POMPA AIR BERBASIS ANDROID

2021 ◽  
Vol 4 (2) ◽  
pp. 146-154
Author(s):  
Yan Mitha Djaksana ◽  
Kelvin Gunawan
Keyword(s):  
Storage Tank ◽  
Water Storage ◽  
Water Tank ◽  
Water Pump ◽  
Monitoring And Control ◽  
Public Places ◽  
Monitoring And Control System ◽  
Water Storage Tank ◽  
And Control ◽  
Internet Of Things Technology

Water is a necessity that is so important for every creature in the world, and the estimate of water must always be available or it is in homes, offices, public places or industry. This causes the water storage tank to play an important role in ensuring the availability of air is always there and under control. In this research, it is based on an Android-based Water Pump Monitoring and Control system with the support of IoT (Internet of Things) technology so that it makes it easier for users to monitor the amount of water in the storage tank and control the water pump to fill water into the tank, the system built is supported by the NodeMCU module. esp8266, Relay and Ultrasonic Sensor and connected to the Blynk application which functions as an application interface in monitoring and controlling the water pump. If the air has determined the specified distance, a notification will appear to immediately turn off the water pump, thus it is hoped that this system can help users see the condition of the water pump and water tank even though they are not at home

Design of a Tornado Missile Resistant Shield for the Angra Nuclear Plant

2015 ◽  
Author(s):  
Alton Reich ◽  
Jason Moon
Keyword(s):  
Storage Tank ◽  
Nuclear Power ◽  
Power Plants ◽  
Water Storage ◽  
Environmental Hazards ◽  
Water Tank ◽  
Raw Water ◽  
Water Storage Tank ◽  
Design Basis ◽  
Under Construction

The Angra site contains the only two operational nuclear power plants in Brazil and one that is under construction. When Angra Unit 1 was designed the risk of tornadoes was deemed to be vanishingly small and tornadoes were not included in the design basis for the plant. When the question of environmental hazards was revisited for the design basis of Angra Unit 3, tornadoes were included as part of the design basis. Based on this change in philosophy for the Angra site, a review was performed and it was determined that the Raw Water Storage Tank and Reactor Make-up Water Tank, both of which are located outdoors at Angra Unit 1 required protection from tornado driven missiles. The tanks contain water that may be used for emergency cooling, and the water must be available for use during a design basis event. This paper provides an overview of the methodology used to design the tornado missile resistant shield structure for these two tanks.

scholarly journals Prototype of Monitoring and Control System of SCADA-based Water Tank Level

2018 ◽  
Vol 4 (1) ◽  
Author(s):  
Irvawansyah Irvawansyah ◽  
Abdul Azis Rahmansyah
Keyword(s):  
Water Level ◽  
Real Time ◽  
Design System ◽  
Water Tank ◽  
Test Results ◽  
Monitoring And Control ◽  
Level Control ◽  
Monitoring And Control System ◽  
Controlling System ◽  
And Control

The monitoring and water level controlling system is one sample of the simple industrial automation. Monitoring  and controlling SCADA based water level can make it easier to do observation and controlling real time. This research have to design system water level control using ultrasonic sensors and equipped with display interface on laptop. This research is an R&D research that starts from the phase of  problem identification,  desing, and  testing. Test results show good performance in accordance with the desired, where the water pump can be turned on when the water level at the reservoir reaches 10 cm and will be stopped automatically if the water level in tank reaches 70 cm. Monitoring and controlling water level can be done in real time on the laptop interface. So this system can be used as an alternative SCADA learning Media.

scholarly journals Draft Genome Sequence of Pseudomonas sp. BDAL1 Reconstructed from a Bakken Shale Hydraulic Fracturing-Produced Water Storage Tank Metagenome

2017 ◽  
Vol 5 (11) ◽  
Author(s):  
Daniel Lipus ◽  
Daniel Ross ◽  
Kyle Bibby ◽  
Djuna Gulliver
Keyword(s):  
Hydraulic Fracturing ◽  
Biofilm Formation ◽  
Storage Tank ◽  
Produced Water ◽  
Draft Genome ◽  
Water Storage ◽  
Water Tank ◽  
Water Storage Tank ◽  
Osmotic Stress Response ◽  
Bakken Shale

ABSTRACT We report the 5,425,832 bp draft genome of Pseudomonas sp. strain BDAL1, recovered from a Bakken shale hydraulic fracturing-produced water tank metagenome. Genome annotation revealed several key biofilm formation genes and osmotic stress response mechanisms necessary for survival in hydraulic fracturing-produced water.

DEVELOPMENT OF COMPUTERIZED MONITORING AND CONTROL SYSTEM OF THE MOBILE ROBOT’S POSITIONING ON LARGE FERROMAGNETIC SURFACES BASED ON INTELLIGENT TECHNIQUES. COMPLEX OF TASKS OF MONITORING AND AUTOMATIC CONTROL OF MOBILE

2019 ◽  
pp. 37-47
Author(s):  
Yao Yueqin ◽  
Oleksiy Kozlov ◽  
Oleksandr Gerasin ◽  
Galyna Kondratenko
Keyword(s):  
Automatic Control ◽  
Point Of View ◽  
Monitoring And Control ◽  
Large Area ◽  
Monitoring And Control System ◽  
Technical Parameters ◽  
Automatic Control Systems ◽  
Current State ◽  
Computerized Monitoring ◽  
And Control

Analysis and formalization of the monitoring and automatic control tasks of the MR for the movement and execution of various types of technological operations on inclined and vertical ferromagnetic surfaces are obtained. Generalized structure of mobile robotic complex is shown with main subsystems consideration. Critical analysis of the current state of the problem of development of universal structures of mobile robots (MRs) for the various types of technological operations execution and elaborations of computerized systems for monitoring and control of MR movement is done. In particular, wheeled, walked and crawler type MRs with pneumatic, vacuum-propeller, magnetic and magnetically operated clamping devices to grip with vertical and ceiling surfaces are reviewed. The constructive features of the crawler MR with magnetic clamping devices capable of moving along sloping ferromagnetic surfaces are considered. The basic technical parameters of the MR are shown for the further synthesis of computerized monitoring and automatic control systems. Formalization of the tasks of monitoring and control of the MR positioning at the processing of large area ferromagnetic surfaces is considered from the point of view of control theory.

DEVELOPMENT OF COMPUTERIZED MONITORING AND CONTROL SYSTEM OF THE MOBILE ROBOT’S POSITIONING ON LARGE FERROMAGNETIC SURFACES BASED ON INTELLIGENT TECHNIQUES. AUTOMATION OF THE MONITORING AND CONTROL PROCESSES OF MOBILE ROBOT FOR PROCESSING OF LARGE INCLINED SURFACES

2019 ◽  
pp. 41-48
Author(s):  
Yan Guojun ◽  
Oleksiy Kozlov ◽  
Oleksandr Gerasin ◽  
Galyna Kondratenko
Keyword(s):  
Control System ◽  
Mobile Robot ◽  
Functional Structure ◽  
Monitoring And Control ◽  
Technological Parameters ◽  
Monitoring And Control System ◽  
Inclined Surfaces ◽  
Computerized Monitoring ◽  
And Control ◽  
Tracked Mobile Robot

The article renders the special features of the design of a tracked mobile robot (MR) for moving over inclined ferromagnetic surfaces while performing specified technological operations. There is conducted a synthesis of the functional structure and selective technological parameters (such as control coordinates) of the computerized monitoring and control system (CMCS) intended for use with this MR. Application of the CMCS with the proposed functional structure allows substantially increasing the accuracy of the MR monitoring and control, which in turn provides for a considerable enhancement in the quality and economic efficiency of the operations on processing of large ferromagnetic surfaces.

Sign in / Sign up

Export Citation Format

Share Document