scholarly journals Influence of a Chaotic Change of Flow Rate of Petroleum Product on the Accuracy of the Coriolis Flowmeter

2021 ◽  
Vol 154 (1) ◽  
pp. 14-20
Author(s):  
O.M. Vasilevskyi ◽  
◽  
D.М. Kompanets ◽  
Keyword(s):  
Petroleum Product ◽  
Flow Rate ◽  
Coriolis Flowmeter

scholarly journals THE ANALYSIS OF A NEW PHYSICAL METHOD FOR MEASURING THE FLUID MASS FLOW RATE AND DENSITY

2020 ◽  
Vol 61 (3) ◽  
pp. 21-30
Author(s):  
Oleg V. Zhiliaev ◽  
◽  
Vladislav N. Kovalnogov ◽  
Keyword(s):  
Mathematical Model ◽  
Mass Flow Rate ◽  
Mass Flow ◽  
Flow Rate ◽  
Physical Method ◽  
Stationary Flow ◽  
Cross Section Area ◽  
Section Area ◽  
Coriolis Flowmeter ◽  
Flexible Walls

This paper gives the preliminary analysis of a new physical method of measuring the fluid’s mass flow rate and density which has been discovered by other authors. The need for exploration and development of the method is defined by its advantages in comparison with other currently existing systems for mass flow rate measuring such as Coriolis flowmeter. The new physical method under consideration is based on measuring the alternating pressure difference which would occur along the flow due to harmonic oscillations of the cross-section area of the pipeline which has flexible walls. It is shown that the new physical method gives the opportunity of simultaneous measurement of mass flow rate and liquid’s density. A mathematical model of the process of non-stationary flow of a liquid is built. The problem of non-stationary flow of a liquid is considered and solved as to be one-dimensioned one. The detailed and thorough derivation of the formulae of the mathematical model is performed. Some inaccuracies in formulae permitted by authors of the method are indicated at. The limitations in applicability of the method which had been indicated at by its authors are also essentially weaken. The theoretical examination and approval of conclusions about the applicability of the new method are made.

A Novel Reconstitution Method for Inducing the Formation of Regular 2-Dimensional Arrays of Membrane Proteins and Lipids

1988 ◽  
Vol 46 ◽  
pp. 152-153 ◽  
Author(s):  
A. Engel ◽  
A. Holzenburg ◽  
K. Stauffer ◽  
J. Rosenbusch ◽  
U. Aebi
Keyword(s):  
Membrane Proteins ◽  
Flow Rate ◽  
Lipid Membranes ◽  
Functional Characterization ◽  
Dimensional Structure ◽  
Electron Crystallography ◽  
Peltier Element ◽  
Protein Ratio ◽  
Precise Control ◽  
3 Dimensional

Reconstitution of solubilized and purified membrane proteins in the presence of phospholipids into vesicles allows their functions to be studied by simple bulk measurements (e.g. diffusion of differently sized solutes) or by conductance measurements after transformation into planar membranes. On the other hand, reconstitution into regular protein-lipid arrays, usually forming at a specific lipid-to-protein ratio, provides the basis for determining the 3-dimensional structure of membrane proteins employing the tools of electron crystallography.To refine reconstitution conditions for reproducibly inducing formation of large and highly ordered protein-lipid membranes that are suitable for both electron crystallography and patch clamping experiments aimed at their functional characterization, we built a flow-dialysis device that allows precise control of temperature and flow-rate (Fig. 1). The flow rate is generated by a peristaltic pump and can be adjusted from 1 to 500 ml/h. The dialysis buffer is brought to a preselected temperature during its travel through a meandering path before it enters the dialysis reservoir. A Z-80 based computer controls a Peltier element allowing the temperature profile to be programmed as function of time.

Novel epoxy/anhydride alternatives for biological electron microscopy: Physical and performance characteristis of embed 812 and LX 112 in combination with NSA/NMA/DMAE

1989 ◽  
Vol 47 ◽  
pp. 1000-1001
Author(s):  
Joe A. Mascorro ◽  
Gerald S. Kirby
Keyword(s):  
Electron Microscopy ◽  
Flow Rate ◽  
Succinic Anhydride ◽  
Volume Flow Rate ◽  
Mass Density ◽  
Uranyl Acetate ◽  
Volume Flow ◽  
Base Resin ◽  
And Performance ◽  
Acid Anhydrides

Embedding media based upon an epoxy resin of choice and the acid anhydrides dodecenyl succinic anhydride (DDSA), nadic methyl anhydride (NMA), and catalyzed by the tertiary amine 2,4,6-Tri(dimethylaminomethyl) phenol (DMP-30) are widely used in biological electron microscopy. These media possess a viscosity character that can impair tissue infiltration, particularly if original Epon 812 is utilized as the base resin. Other resins that are considerably less viscous than Epon 812 now are available as replacements. Likewise, nonenyl succinic anhydride (NSA) and dimethylaminoethanol (DMAE) are more fluid than their counterparts DDSA and DMP- 30 commonly used in earlier formulations. This work utilizes novel epoxy and anhydride combinations in order to produce embedding media with desirable flow rate and viscosity parameters that, in turn, would allow the medium to optimally infiltrate tissues. Specifically, embeding media based on EmBed 812 or LX 112 with NSA (in place of DDSA) and DMAE (replacing DMP-30), with NMA remaining constant, are formulated and offered as alternatives for routine biological work.Individual epoxy resins (Table I) or complete embedding media (Tables II-III) were tested for flow rate and viscosity. The novel media were further examined for their ability to infilftrate tissues, polymerize, sectioning and staining character, as well as strength and stability to the electron beam and column vacuum. For physical comparisons, a volume (9 ml) of either resin or media was aspirated into a capillary viscocimeter oriented vertically. The material was then allowed to flow out freely under the influence of gravity and the flow time necessary for the volume to exit was recored (Col B,C; Tables). In addition, the volume flow rate (ml flowing/second; Col D, Tables) was measured. Viscosity (n) could then be determined by using the Hagen-Poiseville relation for laminar flow, n = c.p/Q, where c = a geometric constant from an instrument calibration with water, p = mass density, and Q = volume flow rate. Mass weight and density of the materials were determined as well (Col F,G; Tables). Infiltration schedules utilized were short (1/2 hr 1:1, 3 hrs full resin), intermediate (1/2 hr 1:1, 6 hrs full resin) , or long (1/2 hr 1:1, 6 hrs full resin) in total time. Polymerization schedules ranging from 15 hrs (overnight) through 24, 36, or 48 hrs were tested. Sections demonstrating gold interference colors were collected on unsupported 200- 300 mesh grids and stained sequentially with uranyl acetate and lead citrate.

Severe Drooling and Treatment With Botulinum Toxin

2012 ◽  
Vol 21 (1) ◽  
pp. 15-21
Author(s):  
Merete Bakke ◽  
Allan Bardow ◽  
Eigild Møller
Keyword(s):  
Botulinum Toxin ◽  
Side Effects ◽  
Health Risk ◽  
Flow Rate ◽  
Clinical Evidence ◽  
Acetylcholine Release ◽  
Psychosocial Problems ◽  
Rate Reduction ◽  
Local Inhibition ◽  
Surgical Treatments

Severe drooling is associated with discomfort and psychosocial problems and may constitute a health risk. A variety of different surgical and non-surgical treatments have been used to diminish drooling, some of them with little or uncertain effect and others more effective but irreversible or with side effects. Based on clinical evidence, injection with botulinum toxin (BTX) into the parotid and submandibular glands is a useful treatment option, because it is local, reversible, and with few side effects, although it has to be repeated. The mechanism of BTX is a local inhibition of acetylcholine release, which diminishes receptor-coupled secretion and results in a flow rate reduction of 25–50% for 2–7 months.

EFFECT OF BODY MASS INDEX ON PEAK EXPIRATORY FLOW RATE

2019 ◽  
Vol 3 (9) ◽  
Author(s):  
K. Subramanyam ◽  
Dr. P. Subhash Babu
Keyword(s):  
Body Mass Index ◽  
Body Mass ◽  
Peak Expiratory Flow ◽  
Flow Rate ◽  
Peak Expiratory Flow Rate ◽  
Normal Weight ◽  
The Body ◽  
Health Care Centre ◽  
Expiratory Flow ◽  
Group B

Obesity has become one of the major health issues in India. WHO defines obesity as “A condition with excessive fat accumulation in the body to the extent that the health and wellbeing are adversely affected”. Obesity results from a complex interaction of genetic, behavioral, environmental and socioeconomic factors causing an imbalance in energy production and expenditure. Peak expiratory flow rate is the maximum rate of airflow that can be generated during forced expiratory manoeuvre starting from total lung capacity. The simplicity of the method is its main advantage. It is measured by using a standard Wright Peak Flow Meter or mini Wright Meter. The aim of the study is to see the effect of body mass index on Peak Expiratory Flow Rate values in young adults. The place of a study was done tertiary health care centre, in India for the period of 6 months. Study was performed on 80 subjects age group 20 -30 years, categorised as normal weight BMI =18.5 -24.99 kg/m2 and overweight BMI =25-29.99 kg/m2. There were 40 normal weight BMI (Group A) and 40 over weight BMI (Group B). BMI affects PEFR. Increase in BMI decreases PEFR. Early identification of risk individuals prior to the onset of disease is imperative in our developing country. Keywords: BMI, PEFR.

Equipment dentifying Vapor Leakages and Recovery of Petroleum Product Vapor When Stored

2020 ◽  
Vol 05 ◽  
pp. 60-64
Author(s):  
Y.N. Rybakov ◽  
◽  
V.E. Danilov ◽  
I.V. Danilov ◽  
◽  
...  
Keyword(s):  
Environmental Pollution ◽  
Environmental Protection ◽  
Petroleum Product ◽  
Petroleum Products ◽  
Oil Products ◽  
Carnot Cycle ◽  
Oil Supply ◽  
Gas Stations ◽  
Environmental Situation ◽  
Vapor Absorption

The problem of losses of oil products from leaks during their storage and transportation at oil supply facilities is considered. The influence of oil product leaks on the environmental situation around oil depots and gas stations is shown. A detailed overview of existing methods and tools for detecting leaks of petroleum products from storage facilities is presented. The evaluation of their effectiveness. Two methods for detecting oil leaks and devices based on them are proposed. The first device monitors the movement of liquid in the tank, the second-detects petroleum products in wastewater. The problem of recovery of petroleum vapors and environmental pollution from the release of vapors of light fractions into the atmosphere is also considered. An overview of existing methods and means of recovery of petroleum vapors is presented. Two methods and devices for capturing oil vapors and returning them to the reservoir are proposed, based on different principles: vapor absorption in the cooled oil product and vapor recovery on the principle of the Carnot cycle. It is shown that these devices can provide effective detection of oil leaks and recovery of their vapors, as well as improve the effectiveness of environmental protection at modern gas stations and tank farms.

SCIENTIFIC AND ENGINEERING PRINCIPLES OF EFFICIENT FUEL USE AND ENVIRONMENTALLY FRIENDLY GAS COMBUSTION IN STOVE PLATES. PART 1. MODERN STATE-OF-THE-ART AND DIRECTIONS FOR IMPROVEMENT THE GAS BURNING IN DOMESTIC GAS COOKERS

2017 ◽  
pp. 3-18 ◽  
Author(s):  
B.S. Soroka ◽  
V.V. Horupa
Keyword(s):  
Natural Gas ◽  
Flow Rate ◽  
Gas Flow ◽  
Renewable Energy Sources ◽  
Combustion Process ◽  
Orifice Diameter ◽  
Firing Process ◽  
Gas Flow Rate ◽  
Gas Combustion ◽  
Gas Stoves

Natural gas NG consumption in industry and energy of Ukraine, in recent years falls down as a result of the crisis in the country’s economy, to a certain extent due to the introduction of renewable energy sources along with alternative technologies, while in the utility sector the consumption of fuel gas flow rate enhancing because of an increase the number of consumers. The natural gas is mostly using by domestic purpose for heating of premises and for cooking. These items of the gas utilization in Ukraine are already exceeding the NG consumption in industry. Cooking is proceeding directly in the living quarters, those usually do not meet the requirements of the Ukrainian norms DBN for the ventilation procedures. NG use in household gas stoves is of great importance from the standpoint of controlling the emissions of harmful components of combustion products along with maintenance the satisfactory energy efficiency characteristics of NG using. The main environment pollutants when burning the natural gas in gas stoves are including the nitrogen oxides NOx (to a greater extent — highly toxic NO2 component), carbon oxide CO, formaldehyde CH2O as well as hydrocarbons (unburned UHC and polyaromatic PAH). An overview of environmental documents to control CO and NOx emissions in comparison with the proper norms by USA, EU, Russian Federation, Australia and China, has been completed. The modern designs of the burners for gas stoves are considered along with defining the main characteristics: heat power, the natural gas flow rate, diameter of gas orifice, diameter and spacing the firing openings and other parameters. The modern physical and chemical principles of gas combustion by means of atmospheric ejection burners of gas cookers have been analyzed from the standpoints of combustion process stabilization and of ensuring the stability of flares. Among the factors of the firing process destabilization within the framework of analysis above mentioned, the following forms of unstable combustion/flame unstabilities have been considered: flashback, blow out or flame lifting, and the appearance of flame yellow tips. Bibl. 37, Fig. 11, Tab. 7.

Sign in / Sign up

Export Citation Format

Share Document