PROFITABILITAS USAHA PETERNAKAN AYAM BROILER DENGAN TIPE KANDANG YANG BERBEDA

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Nurul Mukminah ◽  
Rita Purwasih
Keyword(s):  
Economic Analysis ◽  
Production Cost ◽  
Broiler Chicken ◽  
Production Costs ◽  
Different Types

This study aims to determine and compare the profitability of different types of broiler chicken farms (open and cloused houses) in Subang Regency. This study involved 9 farmers consisting of 5 farmers with closed house and 4 farmers with open house who partnered with PT. Surya Unggas Mandiri (PT. SUM). Production costs taken are 2 production periods from May-August 2018. Data are analyzed using economic analysis and descriptive methods. The results showed that the production cost per period per 1000 birds closed house was higher (Rp. 27.656.768,-) compared to open house (Rp. 24.975.671,-). The revenue per period per 1000 birds of closed house is higher (Rp. 30.606.931,-) compared to open house (Rp. 25.788.618,-). The profit of farmers who use closed house is higher (Rp. 2.621/period/bird) than open house (Rp.417,-). The profitability in close house s is 9.48% and is very feasible to develop

scholarly journals INCORPORATION OF UNCERTAINTY IN TECHNICAL AND ECONOMIC ANALYSIS OF A FELLER-BUNCHER

FLORESTA ◽  
2018 ◽  
Vol 48 (3) ◽  
pp. 403
Author(s):  
Danilo Simões ◽  
Ricardo Hideaki Miyajima ◽  
Rodrigo Petrongari Tonin ◽  
Paulo Torres Fenner ◽  
Gislaine Cristina Batistela
Keyword(s):  
Economic Analysis ◽  
Production Cost ◽  
Probability Distributions ◽  
Operating Cost ◽  
Timber Harvesting ◽  
Production Costs ◽  
P Value ◽  
Strong Positive Correlation ◽  
Technical And Economic Analysis ◽  
Positive Correlation Coefficient

The constant technical and economic analysis of timber harvesting operations is essential and determining, due to the monetary magnitude. Traditionally, these analyses are conducted deterministically, which does not allow obtaining values with probabilities of occurrence. Considering this issue, stochastic models were built in order to analyze the behavior of probabilistic production cost in felling operations with feller-buncher, through the Monte Carlo method. The study was conducted in the Central-West region of the state of São Paulo in a forest of Eucalyptus sp., with six years of age, planted in 3 x 2 m spacing. Technical analysis was based on the study of time and movements, which determined the effective productivity and economy in the hourly operating cost of the feller-buncher and in the production costs of the operation. Due to uncertainties, probability distributions were assigned to these results, which identified the most relevant variables and quantified the probabilities of the production cost. The results demonstrated that the fuel cost had a statistically significant strong positive correlation coefficient ( = 0.91) (p-value < 0.01). The hourly cost, consequently, was directly proportional to the production cost of the operation. The production cost of the operation in flat relief was 18% lower than the production cost of the operation in undulating relief.

scholarly journals Techno-Economic Analysis of Biodiesel Production from Microbial Oil Using Cardoon Stalks as Carbon Source

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1473
Author(s):  
Marco Castellini ◽  
Stefano Ubertini ◽  
Diego Barletta ◽  
Ilaria Baffo ◽  
Pietro Buzzini ◽  
...  
Keyword(s):  
Economic Analysis ◽  
Lignocellulosic Biomass ◽  
Production Cost ◽  
Lipid Production ◽  
Lipid Extraction ◽  
Production Costs ◽  
Raw Material ◽  
Biodiesel Production ◽  
Microbial Oil ◽  
Lipid Yield

Today one of the most interesting ways to produce biodiesel is based on the use of oleaginous microorganisms, which can accumulate microbial oil with a composition similar to vegetable oils. In this paper, we present a thermo-chemical numerical model of the yeast biodiesel production process, considering cardoon stalks as raw material. The simulation is performed subdividing the process into the following sections: steam explosion pre-treatment, enzymatic hydrolysis, lipid production, lipid extraction, and alkali-catalyzed transesterification. Numerical results show that 406.4 t of biodiesel can be produced starting from 10,000 t of lignocellulosic biomass. An economic analysis indicates a biodiesel production cost of 12.8 USD/kg, thus suggesting the need to increase the capacity plant and the lipid yield to make the project economically attractive. In this regard, a sensitivity analysis is also performed considering an ideal lipid yield of 22% and 100,000 t of lignocellulosic biomass. The biodiesel production costs related to these new scenarios are 7.88 and 5.91 USD/kg, respectively. The large capacity plant combined with a great lipid yield in the fermentation stage shows a biodiesel production cost of 3.63 USD/kg making the product competitive on the current market of biofuels by microbial oil.

scholarly journals Analisis Usaha Ayam Broiler yang Menggunakan Prebiotik Immuno Forte®

2017 ◽  
Vol 2 (1) ◽  
pp. 262-276
Author(s):  
Agus Setiawan ◽  
Mira Delima ◽  
Samadi Samadi
Keyword(s):  
Drinking Water ◽  
Production Cost ◽  
Broiler Chicken ◽  
Animal Husbandry ◽  
Production Costs ◽  
Total Production ◽  
Continue Treatment ◽  
Commercial Feed ◽  
Business Analysis ◽  
Banda Aceh

Abstrak. Tujuan penelitian ini adalah untuk mengetahui pengaruh penggunaan Prebiotik Immuno Forte® terhadap usaha ternak ayam broiler. Penelitian ini dilakukan di Laboratorium Lapangan Peternakan (LLP) Jurusan Peternakan Universitas Syah Kuala, Banda Aceh dari tanggal 22 Agustus sampai 21 September 2015. Penelitian ini menggunakan 100 ekor DOC ayam broiler CP 707 strain arbor acres produksi PT. Charoen Pokphand. Ransum yang digunakan dalam penelitian ini adalah ransum komersial R511 HI PRO VITEperiode starterdan R512 Bravo periode finisher. Perlakuan dalam penelitian ini adalah level Immuno forte® dalam air minum terdiri dari yang terdiri dari 5 perlakuan yaitu P0(0 mL Immuno forte®/3 L air ), P1 (0,5 mL Immuno forte®/3 L air), P2(1 mL Immuno forte®/3 L air), P3 (1.5 mL Immuno forte®/3 L air) dan P4 (2 mL Immuno forte®/3 L air). Setiap perlakuan terdiri dari 4 ulangan sehingga diperoleh 20 unit perlakuan. Hasil penelitian menunjukkan bahwa penambahan Immuno forte® dalam air minum selama pemeliharaan memberikan hasil yang berbeda terhadap total biaya produksi. Biaya produksi tertinggi terdapat pada perlakuan P1 (Rp) 143.761, dan yang terendah P2 (Rp) 140.250, dan B/C ratio tertinggi pada P3 1,39, dan terendah pada P2, 1,24. Hasil dari penelitian ini, penggunaan Immuno forte sebagai prebiotik dalam air minum broiler pada semua perlakuan layak untuk dilanjutkan sebagai usaha ternak ayam broiler.  The Broiler Chicken Business Analysis Using Immuno Forte PrebioticsAbstract. The purpose of this experiments is to obtain the effect of prebiotic Immuno forte® on broiler enterprise. This experiment was conducted at Field Laboratory of Animal Husbandry (LLP), Animal Husbandry Department, Syiah Kuala University, Banda Aceh from 22nd August to 21st September 2015. Totally, 100 of day old chickens (DOC) from CP 707 Strain Arbor Acres produced from PT. Charoen Pokphand were used in this study. Commercial feed of R511HI PRO VITE for starterperiod and R512Bravo for finisher was used in this experiment. This study consisted of 5 treatments and 4 replications. The treatment in this study was the level of prebiotic in the drinking water P0 (0 mL Immuno forte®/3 L in drinking water), P1 (0,5 mL Immuno forte®/3 L in drinking water), P2(1 mL Immuno forte®/3 L in drinking water), P3 (1.5 mL Immuno forte®/3 L in drinking water) and P4 (2 mL Immuno forte®/3 L in drinking water). The results of the study indicated that the level of Immuno forte®   in the drinking water significantly influenced on total production cost. The highest production costs are in treatment P1 (Rp) 143 761, and the lowest P2 (Rp) 140 250, and B / C ratio P3 highest at 1.39, and the lowest in P2, 1.24. The results of this study, the use of Immuno forte as a prebiotic in the broiler drinking water at all feasible to continue treatment as broiler chicken farming.

Immaterial Cost and Production: Maximum Production Cost Level Through Marginal Approach

2020 ◽  
Vol 8 (2) ◽  
pp. 128-149
Author(s):  
Dini Maulana Lestari
Keyword(s):  
Quantitative Study ◽  
Marginal Cost ◽  
Production Cost ◽  
Maximum Level ◽  
Production Costs ◽  
Total Production ◽  
Sugar Factory ◽  
Maximum Production ◽  
Cost Approach ◽  
South Sulawesi

This paper will discuss about the immaterial costs and production yields at one of the refined sugar factory companies in Makassar, South Sulawesi. The theory is based on the fact that Immaterial is a cost that is almsgiving, meaning costs that are outside of the basic costs of the company in producing production, so this research aims to find out: (1) what is the production cost needed to produce this production, (2) the maximum level of production at company from 2013 to 2017. This type of research is a quantitative study because it uses a questionnaire in the form of values ​​that are processed using the marginal cost approach formula. The results of the analysis show that (1) the maximum level of production costs occurred in 2016 amounting to 6,912 with an Immaterial cost of Rp. 2,481,796,800 and the total production produced is 359,077.3 tons (2) The required workforce with the total production produced is 359,077.3 tones of 180 people including the maximum production point which means that the lowest value is achieved (optimal).    

MINIMALISASI BIAYA SIMPAN DAN BIAYA SETUP PADA MULTIPLE PRODUK: SIMULASI DENGAN CAPACITATED LOT SIZING PROBLEM

2019 ◽  
Vol 4 (2) ◽  
pp. 205-214
Author(s):  
Erika Fatma
Keyword(s):  
Production Cost ◽  
Lot Sizing ◽  
Setup Time ◽  
Production Costs ◽  
Total Production ◽  
Product Cycle ◽  
Lot Size ◽  
Setup Costs ◽  
Lot Sizing Problem ◽  
Capacitated Lot Sizing

Lot sizing problem in production planning aims to optimize production costs (processing, setup and holding cost) by fulfilling demand and resources capacity costraint. The Capacitated Lot sizing Problem (CLSP) model aims to balance the setup costs and inventory costs to obtain optimal total costs. The object of this study was a plastic component manufacturing company. This study use CLSP model, considering process costs, holding costs and setup costs, by calculating product cycle and setup time. The constraint of this model is the production time capacity and the storage capacity of the finished product. CLSP can reduce the total production cost by 4.05% and can reduce setup time by 46.75%.  Keyword: Lot size, CLSP, Total production cost.

scholarly journals A novel approach to optimize the production cost of railway coaches of India using situational-based composite triangular and trapezoidal fuzzy LPP models

2021 ◽  
Author(s):  
Rakesh Kumar ◽  
Gaurav Dhiman ◽  
Neeraj Kumar ◽  
Rajesh Kumar Chandrawat ◽  
Varun Joshi ◽  
...  
Keyword(s):  
Comparative Study ◽  
Real Time ◽  
Production Cost ◽  
Upper Bounds ◽  
Production Costs ◽  
Cost Data ◽  
Novel Approach ◽  
Membership Grade ◽  
Minimum Costs

AbstractThis article offers a comparative study of maximizing and modelling production costs by means of composite triangular fuzzy and trapezoidal FLPP. It also outlines five different scenarios of instability and has developed realistic models to minimize production costs. Herein, the first attempt is made to examine the credibility of optimized cost via two different composite FLP models, and the results were compared with its extension, i.e., the trapezoidal FLP model. To validate the models with real-time phenomena, the Production cost data of Rail Coach Factory (RCF) Kapurthala has been taken. The lower, static, and upper bounds have been computed for each situation, and then systems of optimized FLP are constructed. The credibility of each model of composite-triangular and trapezoidal FLP concerning all situations has been obtained, and using this membership grade, the minimum and the greatest minimum costs have been illustrated. The performance of each composite-triangular FLP model was compared to trapezoidal FLP models, and the intense effects of trapezoidal on composite fuzzy LPP models are investigated.

scholarly journals The Moderate Operation Scales of Apples Based on Output, Profit, and Unit Production Costs in the Shaanxi Province of China

Land ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 25
Author(s):  
Congying Zhang ◽  
Qian Chang ◽  
Liqun Shao ◽  
Xuexi Huo
Keyword(s):  
Production Cost ◽  
Cost Model ◽  
Unit Cost ◽  
Production Costs ◽  
Shaanxi Province ◽  
Profit Model ◽  
Unit Production Cost ◽  
Net Profit ◽  
Apple Production ◽  
Moderate Scale

In the Shaanxi province, small and scattered plots impede an increase in the efficiency of apple production. Developing a moderate operation scale is a proper tool to solve inefficiencies in apple production, as it enables improving the factor allocation efficiency, resulting in higher yields, higher profit, or lower production costs. However, the moderate operation scales, based on output, profit, and production costs, may be different. This paper aimed to evaluate the moderate operation scale of apples from three perspectives of increasing yields and profits and reducing unit production cost. The study was based on survey data collected from 661 randomly selected apple farmers in eight counties of the Shaanxi province, China. The collected data were analyzed quantitatively by the input-output model, the net profit model, and unit production cost model. The findings show that: (1) The moderate operation scale oriented to increasing apple yields in the Shaanxi province should be 0.87–1.53 ha. (2) The moderate operation scale oriented to increasing the net profit of farmers in the Shaanxi province should be over 1.53 ha. (3) The moderate operation scale oriented to reducing the unit cost of apple production in the Shaanxi province should be 0.20–0.53 ha. The study provides evidence that policymakers should grasp the balance point and find the intersection of the operation scale based on output, profit, and unit production cost when guiding apple growers to carry out the moderate scale. We propose that 0.87–1.53 ha may be a suitable operation scale for apple production in the Shaanxi province at the current stage.

scholarly journals Techno-Economic Analysis of a Hyaluronic Acid Production Process Utilizing Streptococcal Fermentation

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 241
Author(s):  
Rafael G. Ferreira ◽  
Adriano R. Azzoni ◽  
Maria Helena Andrade Santana ◽  
Demetri Petrides
Keyword(s):  
Hyaluronic Acid ◽  
Economic Analysis ◽  
Lower Cost ◽  
Value Added ◽  
Production Costs ◽  
Selling Price ◽  
Baseline Scenario ◽  
Adhesive Properties ◽  
Fed Batch Culture ◽  
Economic Analyses

Hyaluronic acid (HA) is a polysaccharide of alternating d-glucuronic acid and N-acetyl-d-glucosamine residues present in the extracellular matrix of connective, epithelial, and nervous tissues. Due to its singular hydrating, rheological and adhesive properties, HA has found numerous cosmetic and medical applications. However, techno-economic analyses of high value-added bioproducts such as HA are scarce in the literature. Here, we present a techno-economic analysis of a process for producing HA using Streptococcus zooepidemicus, simulated in SuperPro Designer. In the baseline scenario, HA is produced by batch fermentation, reaching 2.5 g/L after 24 h. It is then centrifuged, diafiltered, treated with activated carbon and precipitated with isopropanol. The product is suitable for topical formulations and its production cost was estimated as 1115 $/kg. A similar scenario, based on fed-batch culture and assuming a titer of 5.0 g/L, led to a lower cost of 946 $/kg. Moreover, in two additional scenarios, 10% of the precipitated HA is diverted to the production of a highly pure and high-molecular weight HA, suitable for injectable applications. These scenarios resulted in higher capital and operating costs, but also in higher profits, because HA for injectable use has a higher selling price that more than compensates for its higher production costs.

scholarly journals Performance evaluation of power-operated reapers for harvesting rice at farmers’ field

2018 ◽  
Vol 16 (1) ◽  
pp. 144-150
Author(s):  
Md Ashraful Alam ◽  
Anwar Hossen ◽  
AKM Saiful Islam ◽  
Monjurul Alam
Keyword(s):  
Performance Evaluation ◽  
Economic Performance ◽  
Production Cost ◽  
Field Capacity ◽  
Production Costs ◽  
High Wage ◽  
Harvesting Time ◽  
Actual Field ◽  
Field Efficiency ◽  
User Friendly

Harvesting is one of the major labor intensive works in rice cultivation. Appropriate harvesting machinery is urgently needed to reduce labor and production costs. Production cost of rice becomes high due to labor shortage and high wage rate during harvesting time. Techno-economic performance of Korean self-propelled reaper (KR), China self-propelled reaper (CR) and BRRI reaper (BR) were evaluated in order to identify the field constrains and problems of the reapers at Mithapukur of Rangpur, Bangladesh during Aman season of 2013. The actual field capacities of the KR, CR and BR were found 0.18, 0.17 and 0.15 ha h–1with the corresponding field efficiency of 55, 68 and 56%, respectively. The variation of field capacity among the models was due to turning time losses, weight of the reaper and operator’s skill. The fuel consumption of the reapers was 4.11, 2.61 and 8.39 l ha–1 for KR, CR and BR, respectively. The shattering loss of paddy harvesting was 1.66, 1.50 and 1.45% for KR, CR and BR, respectively. The break-even area of the reapers was 9.15, 7.82 and 8.43 ha yr-1 for KR, CR and BR, respectively. It is evident that the reaper could be used successfully as labor saving and user friendly technology to eliminate post-harvest problems in Bangladesh.J. Bangladesh Agril. Univ. 16(1): 144-150, April 2018

scholarly journals Aplikasi Metode Simpleks Pada Optimalisasi Biaya Bahan Baku (Studi Kasus: Ukm Najmah Klappertart)

2020 ◽  
Vol 17 (2) ◽  
pp. 129-140
Author(s):  
D Damayanti ◽  
A I Jaya ◽  
Resnawati
Keyword(s):  
Simplex Method ◽  
Production Cost ◽  
Production Costs ◽  
Optimal Production ◽  
Total Cost ◽  
Optimal Cost ◽  
Cost Of Production ◽  
The Cost

ABSTRACT The purpose of this research is to obtain an the optimal production costs of Klappertart based on the basic ingredients comparing the production cost of Klappertart in Najmah Klappertart with production costs using the simplex method. The result showed that the optimal costs is ,-. This result is equal to the total cost of klappertart by SMEs Najmah Klappertart, so it can be concluded that the cost of production klappertart based on the basic ingredients on SMEs Najmah Klappertart were optimal. Keywords      : Optimal Cost, Basic Ingredients, Production Costs. (A-Z), Simplex Method  

Sign in / Sign up

Export Citation Format

Share Document