scholarly journals SLOPE STABILITY ASSESSMENT OF THE UPSTREAM SLOPE OF THE DRY MOUNTAIN FLOOD CONTROL RESERVOIR DURING THE FLOOD

2021 ◽  
pp. 4-12
Author(s):  
Svitlana Velychko ◽  
Olena Dupliak ◽  
Tetiana Kurbanova
Keyword(s):  
Slope Stability ◽  
Water Level ◽  
Flood Control ◽  
Limit Equilibrium ◽  
High Water ◽  
Limit Equilibrium Method ◽  
Water Levels ◽  
The Body ◽  
Stability Assessment ◽  
Upstream Slope

The flood control is one of the priority goal for successful economic activity on the areas that are periodically suffer from floods. Such areas are the mountainous regions of the Ukrainian Carpathian Mountains. Floods on the mountain rivers are repeated several times each year, and are characterized by the sudden water level rise with almost the same rapid decrease of the water level. Active flood protection measures include dry mountain flood control reservoirs, the principle of which is to transform part of the flood runoff and to accumulate water for the short time in the the artificial reservoir, with followed rapid emptying to the minimum level. The complex hydraulic regime is formed in the body of the dam which forms the flood control reservoir during the flood, that is different from the operation of the water permanent reservoir. The design of the flood control structures is car-ried out in accordance with Ukrainian building codes for the construction of the water reservoirs with constant water level, and require testing the stability of the downstream slope for the maximum water levels under steady state seepage conditions and assessment the upstream slope stability during the water level decreasing  from the maximum level calculated in the steady state condition, these calculations do not correspond to the real seepage processes in the body of the dam of the dry flood control reservoir. Therefore, the purpose of this work is to determine the necessary boundary conditions of the flood control reservoir operation and upstream slope stability assessment by the limit equilibrium method. In the article the operation of the dry mountain flood control reservoir was analysed and found that the dam was characterized by two states: dry reservoir with water minimum water level and variable position of the seepage curve in the core and the upstream prism during the flood. The main factors influencing the upstream slope stability are the physical and mechanical properties of the soil, the laying of the slope, the period of time when the high-water level is maintained and the intensity of water level dropping. The upstream slope stability was evaluated by the Morgenstern & Price and Ordinary methods on the Slope/w software package. After the first 25 hours of the flood (period of high-water levels and the next water level dropping) the Safety Factor evaluated by limit equilibrium methods began to decrease, and reached the minimum value during the greatest seepage curve gradients at the time between 45 and 50 hours. Slope stability calculations by the limit equilibrium method were compared with the results of calculations performed by the SRM method, the values ​​of the Safety Factor and the way of their change during the flood evaluated by Ordinary and SRM methods almost coincide, which indicates the reliability of the results obtained by different methods of slope stability analysis

scholarly journals The dam slope stability under the transient condition during an extreme flood

2021 ◽  
Vol 280 ◽  
pp. 10010
Author(s):  
Svitlana Velychko ◽  
Olena Dupliak
Keyword(s):  
Slope Stability ◽  
Water Level ◽  
Flood Control ◽  
Transient Condition ◽  
Mountainous Area ◽  
The Core ◽  
Upstream Slope ◽  
Flood Level ◽  
Extreme Flood ◽  
The Stability

Mountain Flood Control Reservoir (MFC Reservoir) is used to reduce the flood level in the mountainous area and protect settlements downstream. The special feature of this MFC Reservoir is the fast filling during 1-2 days, short storage time at the maximum level and speed falling of the water level. Simulation of the MFC Reservoir operation was carried out on the software Midas GTS NX. Two rockfill dam models were developed: with the core and with the screen. The fluctuation of the water level in the MFC Reservoir was taken as the transformed flood from 1% to 10% probability. The fast water level change in the MCF Reservoir creates the transient seepage condition during the flood. During the water level rising in the MFC Reservoir, the upstream slope stability gradually increases because of hydrostatic pressure. After the water level begins to fall with rate of 0.7 m/hour, the slope stability decreases. The core or screen location significantly affects the stability of the upstream dam slope. The simulation showed that the upstream slope of the dam with the core was more stable. Due to the high hydraulic conductivity, the upstream dam prism with the berm significantly dampens the pore pressure in the dam and increases the stability of the upstream slope.

Lake and inland dunes as interconnected Systems: The story of Lake Tresssee and an adjacent dune field (Schleswig-Holstein, North Germany)

The Holocene ◽  
2020 ◽  
pp. 095968362098168
Author(s):  
Christian Stolz ◽  
Magdalena Suchora ◽  
Irena A Pidek ◽  
Alexander Fülling
Keyword(s):  
Water Level ◽  
Bronze Age ◽  
Environmental Changes ◽  
High Water ◽  
Alluvial Fan ◽  
Water Levels ◽  
Lake Area ◽  
Dune Field ◽  
The North ◽  
Sand Drift

The specific aim of the study was to investigate how four adjacent geomorphological systems – a lake, a dune field, a small alluvial fan and a slope system – responded to the same impacts. Lake Tresssee is a shallow lake in the North of Germany (Schleswig-Holstein). During the Holocene, the lake’s water surface declined drastically, predominately as a consequence of human impact. The adjacent inland dune field shows several traces of former sand drift events. Using 30 new radiocarbon ages and the results of 16 OSL samples, this study aims to create a new timeline tracing the interaction between lake and dunes, as well, as how both the lake and the dunes reacted to environmental changes. The water level of the lake is presumed to have peaked during the period before the Younger Dryas (YD; start at 10.73 ka BC). After the Boreal period (OSL age 8050 ± 690 BC) the level must have undergone fluctuations triggered by climatic events and the first human influences. The last demonstrable high water level was during the Late Bronze Age (1003–844 cal. BC). The first to the 9th century AD saw slightly shrinking water levels, and more significant ones thereafter. In the 19th century, the lake area was artificially reduced to a minimum by the human population. In the dunes, a total of seven different phases of sand drift were demonstrated for the last 13,000 years. It is one of the most precisely dated inland-dune chronologies of Central Europe. The small alluvial fan took shape mainly between the 13th and 17th centuries AD. After 1700 cal. BC (Middle Bronze Age), and again during the sixth and seventh centuries AD, we find enhanced slope activity with the formation of Holocene colluvia.

scholarly journals Optimal Operation of Floodwater Resources Utilization of Lakes in South-to-North Water Transfer Eastern Route Project

2021 ◽  
Vol 13 (9) ◽  
pp. 4857
Author(s):  
Zitong Yang ◽  
Xianfeng Huang ◽  
Jiao Liu ◽  
Guohua Fang
Keyword(s):  
Water Level ◽  
Resource Utilization ◽  
Flood Control ◽  
Optimal Operation ◽  
Water Transfer ◽  
Water Levels ◽  
Reservoir Storage ◽  
Flood Season ◽  
Hongze Lake ◽  
North Water

In order to meet the demand of emergency water supply in the northern region without affecting normal water transfer, considering the use of the existing South-to-North Water Transfer eastern route project to explore the potential of floodwater resource utilization in the flood season of Hongze Lake and Luoma Lake in Jiangsu Province, this paper carried out relevant optimal operating research. First, the hydraulic linkages between the lakes were generalized, then the water resources allocation mode and the scale of existing projects were clarified. After that, the actual available amount of flood resources in the lakes was evaluated. The average annual available floodwater resources in 2003–2017 was 1.49 billion m3, and the maximum available capacity was 30.84 billion m3. Then, using the floodwater resource utilization method of multi period flood limited water levels, the research period was divided into the main flood season (15 July to 15 August) and the later flood season (16 August to 10 September, 11 September to 30 September) by the Systematic Clustering Analysis method. After the flood control calculation, the limited water level of Hongze Lake in the later flood season can be raised from 12.5 m to 13.0 m, and the capacity of reservoir storage can increase to 696 million m3. The limited water level of Luoma Lake can be raised from 22.5 m to 23.0 m (16 August to 10 September), 23.5 m (11 September to 30 September), and the capacity of reservoir storage can increase from 150 to 300 million m3. Finally, establishing the floodwater resource optimization model of the lake group with the goals of maximizing the floodwater transfer amount and minimizing the flood control risk rate, the optimal water allocation scheme is obtained through the optimization algorithm.

Slope Stability Analysis of Elastic Limit Equilibrium Method

2013 ◽  
Vol 275-277 ◽  
pp. 1423-1426
Author(s):  
Lin Kuang ◽  
Ai Zhong Lv ◽  
Yu Zhou
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Slip Surface ◽  
Limit Equilibrium ◽  
Limit Equilibrium Method ◽  
Slope Stability Analysis ◽  
Sliding Surface ◽  
Tangential Stresses ◽  
Equilibrium Method

Based on finite element analysis software ANSYS, slope stability analysis is carried out by Elastic limiting equilibrium method proposed in this paper. A series of sliding surface of the slope can be assumed firstly, and then stress field along the sliding surface is analyzed as the slope is in elastic state. The normal and tangential stresses along each sliding surface can be obtained, respectively. Then the safety factor for each slip surface can be calculated, the slip surface which the safety factor is smallest is the most dangerous sliding surface. This method is different from the previous limit equilibrium method. For the previous limit equilibrium method, the normal and tangential stresses along the sliding surface are calculated based on many assumptions. While, the limit equilibrium method proposed in this paper has fewer assumptions and clear physical meaning.

Some difficulties associated with the limit equilibrium method of slices

1983 ◽  
Vol 20 (4) ◽  
pp. 661-672 ◽  
Author(s):  
R. K. H. Ching ◽  
D. G. Fredlund
Keyword(s):  
Slope Stability ◽  
Factor Of Safety ◽  
Limit Equilibrium ◽  
Stability Limit ◽  
Limit Equilibrium Method ◽  
Soil Conditions ◽  
Side Force ◽  
Limit Equilibrium Methods ◽  
Equilibrium Method ◽  
The Stability

Several commonly encountered problems associated with the limit equilibrium methods of slices are discussed. These problems are primarily related to the assumptions used to render the inherently indeterminate analysis determinate. When these problems occur in the stability computations, unreasonable solutions are often obtained. It appears that problems occur mainly in situations where the assumption to render the analysis determinate seriously departs from realistic soil conditions. These problems should not, in general, discourage the use of the method of slices. Example problems are presented to illustrate these difficulties and suggestions are proposed to resolve these problems. Keywords: slope stability, limit equilibrium, method of slices, factor of safety, side force function.

scholarly journals Failure of Zoned Earth Dam (An analysis of earth dam break)

2019 ◽  
Vol 27 (1) ◽  
pp. 344-353
Author(s):  
Abdul-Hassan K. Al-Shukur ◽  
Ranya Badea’ Mahmoud
Keyword(s):  
Water Level ◽  
Factor Of Safety ◽  
Limit Equilibrium ◽  
Water Flux ◽  
Dam Break ◽  
The Body ◽  
Earth Dam ◽  
Dam Failure ◽  
Maximum Water Level ◽  
Maximum Water

One of the most common type of embankment dam failure is the dam-break due to overtopping. In this study, the finite elements method has been used to analyze seepage and limit equilibrium method to study stability of the body of an earthfill dam during the flood condition. For this purpose, the software Geostudio 2012 is used through its subprograms SEEP/W and SLOPE/W. Al-Adhaim dam in Iraq has been chosen to analysis the 5 days of flood. It was found that the water flux of seepage during the flood reaches about 8.772*10-5. m3/sec when the water level 146.5 m at 2nd day. Seepage through the embankment at maximum water level increased by 55.1 % from maximum water level. It was concluded that the factor of safety against sliding in downstream side decrease with increasing water level and vice versa. It was also concluded that the deposits are getting more critical stability during the conditions of flood when the factor of safety value reaches 1.219 at 2nd day.

The effect of ground water-level on the yield of some common crops on a fen peat soil

1958 ◽  
Vol 50 (3) ◽  
pp. 243-252 ◽  
Author(s):  
H. H. Nicholson ◽  
D. H. Firth
Keyword(s):  
Ground Water ◽  
Water Level ◽  
Peat Soil ◽  
Good Condition ◽  
High Water ◽  
Water Levels ◽  
Ground Water Level ◽  
Potential Evaporation ◽  
Soil Moisture Deficit ◽  
Moisture Deficit

An account is given of a field experiment in the control of ground water-level in a Fen peat soil, together with its results on the yields of crops in a six-course rotation.The seasonal variations in rainfall are presented in terms of potential evaporation and soil moisture deficit. The effect of the water-level on the moistness of the soil above it is indicated. Even in a wet summer, drying was perceptible within 18–20 in. of the ground water-level between successive falls of rain.The fluctuations of the ground water-levels are discussed. Those of the high water-levels were chiefly due to individual incidences of rain causing rises short in duration, but sufficient in the case of water-levels within 20 in. of the surface to cause total waterlogging and surface ponding. Those of the deep water-levels were most influenced by evaporation, with steady and persistent falls during any rain-free period.The deterioration of the physical condition of the soil over high water-levels is shown in the result of sieving tests. In 6 years the loss of tilth over waterlevels within 20 in. of the surface was very marked and was discernible over those as low as 30 in.The possibilities of effectively using high ground water-levels occasionally in soils in good condition are shown by the results with celery and potatoes.

Sign in / Sign up

Export Citation Format

Share Document