scholarly journals The Effect of Co-Saturated Salts on the Kinematic Viscosity of Water

Author(s):  
Alexei Alexandre Akoulov ◽  
Travis Wiens

It is well documented in the literature how individual salts such as sodium chloride (NaCl) and potassium chloride (KCl) effect the kinematic viscosity of a water solution. However, there exists little to no information on how the presence of both NaCl and KCl in a co-saturated state affect the kinematic viscosity of the solution. This paper reviews experimental measurements of co-saturated aqueous NaCl:KCl solutions across the temperature range of 20-65 oC at three different concentration ratios. These data are compared to the known kinematic viscosity curves of saturated NaCl solution and pure water from literature.

1973 ◽  
Vol 51 (12) ◽  
pp. 1885-1888 ◽  
Author(s):  
Ikchoon Lee ◽  
J. B. Hyne

The temperature dependence of the energy–volume coefficient of pure water and of aqueous potassium chloride solutions as a function of concentration over the temperature range 10–50 °C has been determined by direct measurement of constant volume thermal–pressure coefficient. The results show that a thermal anomaly exists in the energy–volume coefficient of aqueous solution in the temperature range 30–40 °C and becomes more pronounced as the concentration of solute is increased.


1981 ◽  
Vol 46 (12) ◽  
pp. 3104-3109 ◽  
Author(s):  
Miroslav Ludwig ◽  
Oldřich Pytela ◽  
Miroslav Večeřa

Rate constants of non-catalyzed hydrolysis of 3-acetyl-1,3-diphenyltriazene (I) and 3-(N-methylcarbamoyl)-1,3-diphenyltriazene (II) have been measured in the presence of salts (ammonium chloride, potassium chloride, lithium chloride, sodium chloride and bromide, ammonium sulphate, potassium sulphate, lithium sulphate, sodium sulphate and zinc sulphate) within broad concentration ranges. Temperature dependence of the hydrolysis of the substrates studied has been measured in the presence of lithium sulphate within temperature range 20° to 55 °C. The results obtained have been interpreted by mechanisms of hydrolysis of the studied substances.


1995 ◽  
Vol 60 (11) ◽  
pp. 1971-1985 ◽  
Author(s):  
Čestmír Koňák ◽  
Zdeněk Tuzar ◽  
Pavla Kopečková ◽  
Joseph D. Andrade ◽  
Jindřich Kopeček

Solution properties of the statistical copolymers of alkyl methacrylates (AMA) with α-methyl-ω-hydroxy-poly(oxyethylene) methacrylates (MPOEMA) (nonionic polysoaps) were studied using static and dynamic ligh scattering as a function of monomer composition and concentration in aqueous and methyl cellosolve solutions. The solubility of the copolymers in water was found to be dependent on molar contant of AMA. While copolymers with low content of hexyl methacrylate (HMA) (0 and 20 mole %) were directly soluble in water, forming true solutions with a low content of large swollen aggregates, copolymers with a higher content of HMA or lauryl methacrylate (LMA) were not directly dispersable in water. A special procedure, the stepwise dialysis from methyl cellosolve solutions against water, had to be used to prepare them in the pseudomicellar form. The copolymers were directly soluble in methyl cellosolve and its water solution containing up to 60 vol.% of water. Nevertheless, the light scattering experiments were dominated by light scattering of swollen particles of aggregated copolymer molecules. The copolymers were not soluble in the mixtures containing 70-100 vol.% of water. Paramaters of aggregates in the mixture with 60 vol.% of water and in pure water were found to be very similar.


Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 306
Author(s):  
Kazuya Taira ◽  
Tomonori Waku ◽  
Yoshimichi Hagiwara

The control of ice growth inside channels of aqueous solution flows is important in numerous fields, including (a) cold-energy transportation plants and (b) the preservation of supercooled human organs for transplantation. A promising method for this control is to add a substance that influences ice growth in the flows. However, limited results have been reported on the effects of such additives. Using a microscope, we measured the growth of ice from one sidewall toward the opposite sidewall of a mini-channel, where aqueous solutions of sodium chloride and antifreeze protein flowed. Our aim was to considerably suppress ice growth by mixing the two solutes. Inclined interfaces, the overlapping of serrated interfaces, and interfaces with sharp and flat tips were observed in the cases of the protein-solution, salt-solution, and mixed-solution flows, respectively. In addition, it was found that the average interface velocity in the case of the mixed-solution flow was the lowest and decreased by 64% compared with that of pure water. This significant suppression of the ice-layer growth can be attributed to the synergistic effects of the ions and antifreeze protein on the diffusion of protein.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Bijaya B. Karki ◽  
Dipta B. Ghosh ◽  
Shun-ichiro Karato

AbstractWater (H2O) as one of the most abundant fluids present in Earth plays crucial role in the generation and transport of magmas in the interior. Though hydrous silicate melts have been studied extensively, the experimental data are confined to relatively low pressures and the computational results are still rare. Moreover, these studies imply large differences in the way water influences the physical properties of silicate magmas, such as density and electrical conductivity. Here, we investigate the equation of state, speciation, and transport properties of water dissolved in Mg1−xFexSiO3 and Mg2(1−x)Fe2xSiO4 melts (for x = 0 and 0.25) as well as in its bulk (pure) fluid state over the entire mantle pressure regime at 2000–4000 K using first-principles molecular dynamics. The simulation results allow us to constrain the partial molar volume of the water component in melts along with the molar volume of pure water. The predicted volume of silicate melt + water solution is negative at low pressures and becomes almost zero above 15 GPa. Consequently, the hydrous component tends to lower the melt density to similar extent over much of the mantle pressure regime irrespective of composition. Our results also show that hydrogen diffuses fast in silicate melts and enhances the melt electrical conductivity in a way that differs from electrical conduction in the bulk water. The speciation of the water component varies considerably from the bulk water structure as well. Water is dissolved in melts mostly as hydroxyls at low pressure and as –O–H–O–, –O–H–O–H– and other extended species with increasing pressure. On the other hand, the pure water behaves as a molecular fluid below 15 GPa, gradually becoming a dissociated fluid with further compression. On the basis of modeled density and conductivity results, we suggest that partial melts containing a few percent of water may be gravitationally trapped both above and below the upper mantle-transition region. Moreover, such hydrous melts can give rise to detectable electrical conductance by means of electromagnetic sounding observations.


Sign in / Sign up

Export Citation Format

Share Document