scholarly journals Assessing costs and environmental impacts of municipal food waste treatment options in Columbia, Missouri : a decision support tool integrating life cycle analysis and robust optimization

2021 ◽  
Author(s):  
◽  
Lydia Schreiber
Keyword(s):  
Life Cycle ◽  
Anaerobic Digestion ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Animal Feed ◽  
Treatment Options ◽  
Ghg Emissions ◽  
Average Case ◽  
Support Tool ◽  
Feed Production

Many municipal governments currently have goals in place to align with global efforts and policy to reduce greenhouse gas (GHGs) emissions and take advantage of waste as a resource for renewable energy and nutrients. To meet specified goals and targets, decisionmakers need data-driven analysis to understand both the costs and environmental impacts of their plans. This study develops a decision support tool applied in Columbia, Missouri, USA, with aims to model the economic and environmental tradeoffs in solid waste management decisions for the collection and treatment of food waste in the municipal solid waste stream while considering existing infrastructure and uncertainty in environmental impact data. The tool uses life cycle analysis environmental impact data from literature and cost data from case-studies to simulate both a FW collection route and the processing of FW through various potential and existing treatment options (anaerobic digestion, anaerobic co-digestion with sewage sludge, composting, landfilling, dry animal feed production, wet animal feed production). The model calculates the cost and greenhouse gas emissions of the transportation and treatment processes in each simulation. The tool can choose the best FW management scenario for the objective of minimizing cost or minimizing GHG emissions. Robust optimization incorporates uncertainty into the model by allowing environmental impacts for any FW treatment option to assume a maximum or minimum of a range of values from literature, representing the worst- and best-case values for environmental performance, respectively. Average case results indicate that a minimum cost scenario uses a combination of landfilling and composting FW that results in net positive GHG emissions. To minimize environmental impact, the average case results favor anaerobic digestion, a scenario which results in net negative GHG emissions. Compared to the minimum cost scenario, the transportation costs in the minimum impact scenario are similar, while the costs to treat the FW are nearly nine times higher. Robust results focus on variability in environmental impacts. In the model results, anaerobic digestion is favored when assuming its minimum environmental impact value but is outperformed by other options when anaerobic digestion assumes the maximum of its possible range. All considered options outperform landfilling, but the rankings among landfilling alternatives depend highly on assumptions regarding offsets estimated in life cycle assessment. Without any offsets, wet animal feed production is the best FW treatment solution. Environmental impact of transportation in this model is not influential. The results demonstrate the importance of model assumptions, uncertainty in life cycle GHG estimates, and consideration of existing infrastructure in determining the optimal scenarios.

Towards a Green Quail Meat Production through Life Cycle Perspective

2015 ◽  
Vol 747 ◽  
pp. 282-285
Author(s):  
Amir Hamzah Sharaai ◽  
Mohd Zulfadhli Mat Zainol ◽  
Khairul Izzuddin bin Muhammad
Keyword(s):  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Energy Use ◽  
Meat Production ◽  
Poultry Production ◽  
Iso 14040 ◽  
Feed Production ◽  
Life Cycle Perspective ◽  
Cradle To Gate

Commercial conventional of poultry production at largest scale in this country show escalation year by year, together with high demand of poultry product in Malaysia market. The aim of this research was to identify environmental impact hotspots in the whole supply chain of quail meat production in Jasin, Melaka. At present, assessment of environmental impact of poultry production in Malaysia is lacking.Therefore, this study was conducted to evaluate the energy use and environmental impacts of quail meat production in Jasin,Melaka through life cycle assessment.A cradle-to-gate assessment including distribution stage was conducted based on the ISO 14040/14044 guidelines.Life cycle inventory data was collected from farmers and available literature. Life cycle impact assessment was conducted toidentify environmental impacts using the available method in theopenLCA software.Life cycle processes related to feed production, electricity and water were identified as the major hotspots for energy and they also showed the most significant contribution in GWP and acidication potential among the environmental impacts categories. Improving efficiency of energy and water consumption will reduce the environmental burden associated with quail meat production.Thus, at the end of this research, it will able to make industry player to understand and take into consideration the solutions in order to promote a green quail meat production.

scholarly journals The Life-Cycle Environmental Impact of Recycling of Restaurant Food Waste in Lanzhou, China

2019 ◽  
Vol 9 (17) ◽  
pp. 3608 ◽  
Author(s):  
Zhang ◽  
Han ◽  
Chen ◽  
Yang ◽  
Lu ◽  
...  
Keyword(s):  
Life Cycle ◽  
Anaerobic Digestion ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Food Waste ◽  
Energy Structure ◽  
Treatment Technique ◽  
Aerobic Composting ◽  
Aquatic Ecotoxicity ◽  
Photochemical Ozone

The recycling of restaurant food waste can bring environmental benefits and improve food safety for urban residents. We here assessed the entire life cycle of the anaerobic digestion–aerobic composting technique of restaurant food waste recycling using Lanzhou as a case study. We used the CML2001 method provided with the Gabi software and compared the results to those produced using the traditional treatment techniques (landfill and incineration). This work includes a sensitivity analysis of the results. It is here concluded that the anaerobic digestion–aerobic composting technique had the smallest environmental impact of the methods here examined. The life cycle of anaerobic digestion–aerobic composting primarily consumes water, clay, coal, crude oil, and natural gas. The pre-processing phase consumes the most resources, and anaerobic digestion showed the greatest environmental impact. Specific environmental impacts in order from the highest to lowest potential to exacerbate global warming were found to be photochemical ozone production, acidification, eutrophication, marine aquatic ecotoxicity, human toxicity, freshwater aquatic ecotoxicity, and terrestrial ecotoxicity. The main factors associated with different environmental impacts and the environmental impacts themselves were found to differ across different phases. Some environmental impacts were shown to be sensitive to electricity, and the eutrophication potential and photochemical ozone creation potential showed the least sensitivity to all variables. To reduce the environmental impact of the anaerobic digestion–aerobic composting treatment technique, the energy structure and consumption of electricity, water, and diesel need to be optimized.

Comparing centralised and decentralised anaerobic digestion of stillage from a large-scale bioethanol plant to animal feed production

2008 ◽  
Vol 58 (7) ◽  
pp. 1483-1489 ◽  
Author(s):  
B. Drosg ◽  
T. Wirthensohn ◽  
G. Konrad ◽  
D. Hornbachner ◽  
C. Resch ◽  
...  
Keyword(s):  
Anaerobic Digestion ◽  
Large Scale ◽  
Animal Feed ◽  
Treatment Options ◽  
Land Application ◽  
Small Scale ◽  
Chemical Parameters ◽  
Feed Production ◽  
Aerobic Wastewater Treatment ◽  
Biogas Plants

A comparison of stillage treatment options for large-scale bioethanol plants was based on the data of an existing plant producing approximately 200,000 t/yr of bioethanol and 1,400,000 t/yr of stillage. Animal feed production – the state-of-the-art technology at the plant- was compared to anaerobic digestion. The latter was simulated in two different scenarios: digestion in small-scale biogas plants in the surrounding area versus digestion in a large-scale biogas plant at the bioethanol production site. Emphasis was placed on a holistic simulation balancing chemical parameters and calculating logistic algorithms to compare the efficiency of the stillage treatment solutions. For central anaerobic digestion different digestate handling solutions were considered because of the large amount of digestate. For land application a minimum of 36,000 ha of available agricultural area would be needed and 600,000 m3 of storage volume. Secondly membrane purification of the digestate was investigated consisting of decanter, microfiltration, and reverse osmosis. As a third option aerobic wastewater treatment of the digestate was discussed. The final outcome was an economic evaluation of the three mentioned stillage treatment options, as a guide to stillage management for operators of large-scale bioethanol plants.

The potential of bio-methane as bio-fuel/bio-energy for reducing greenhouse gas emissions: a qualitative assessment for Europe in a life cycle perspective

2008 ◽  
Vol 57 (11) ◽  
pp. 1683-1692 ◽  
Author(s):  
Andrea Tilche ◽  
Michele Galatola
Keyword(s):  
Wastewater Treatment ◽  
Life Cycle ◽  
Anaerobic Digestion ◽  
Greenhouse Gas ◽  
Industrial Wastewater ◽  
Ghg Emissions ◽  
Energy Crops ◽  
Qualitative Assessment ◽  
Potential Contribution ◽  
Ghg Reduction

Anaerobic digestion is a well known process that (while still capable of showing new features) has experienced several waves of technological development. It was “born” as a wastewater treatment system, in the 1970s showed promise as an alternative energy source (in particular from animal waste), in the 1980s and later it became a standard for treating organic-matter-rich industrial wastewater, and more recently returned to the market for its energy recovery potential, making use of different biomasses, including energy crops. With the growing concern around global warming, this paper looks at the potential of anaerobic digestion in terms of reduction of greenhouse gas (GHG) emissions. The potential contribution of anaerobic digestion to GHG reduction has been computed for the 27 EU countries on the basis of their 2005 Kyoto declarations and using life cycle data. The theoretical potential contribution of anaerobic digestion to Kyoto and EU post-Kyoto targets has been calculated. Two different possible biogas applications have been considered: electricity production from manure waste, and upgraded methane production for light goods vehicles (from landfill biogas and municipal and industrial wastewater treatment sludges). The useful heat that can be produced as by-product from biogas conversion into electricity has not been taken into consideration, as its real exploitation depends on local conditions. Moreover the amount of biogas already produced via dedicated anaerobic digestion processes has also not been included in the calculations. Therefore the overall gains achievable would be even higher than those reported here. This exercise shows that biogas may considerably contribute to GHG emission reductions in particular if used as a biofuel. Results also show that its use as a biofuel may allow for true negative GHG emissions, showing a net advantage with respect to other biofuels. Considering also energy crops that will become available in the next few years as a result of Common Agricultural Policy (CAP) reform, this study shows that biogas has the potential of covering almost 50% of the 2020 biofuel target of 10% of all automotive transport fuels, without implying a change in land use. Moreover, considering the achievable GHG reductions, a very large carbon emission trading “value” could support the investment needs. However, those results were obtained through a “qualitative” assessment. In order to produce robust data for decision makers, a quantitative sustainability assessment should be carried out, integrating different methodologies within a life cycle framework. The identification of the most appropriate policy for promoting the best set of options is then discussed.

scholarly journals Analysis of the Characteristics of Environmental Impacts According to the Cut-Off Criteria Applicable to the Streamlined Life Cycle Assessment (S-LCA) of Apartment Buildings in South Korea

2021 ◽  
Vol 13 (5) ◽  
pp. 2898
Author(s):  
Rakhyun Kim ◽  
Myung-Kwan Lim ◽  
Seungjun Roh ◽  
Won-Jun Park
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Impact Analysis ◽  
Impact Categories ◽  
Environmental Impact Analysis ◽  
Apartment Buildings ◽  
Environmental Impact Categories ◽  
Weight Percentile

This study analyzed the characteristics of the environmental impacts of apartment buildings, a typical housing type in South Korea, as part of a research project supporting the streamlined life cycle assessment (S-LCA) of buildings within the G-SEED (Green Standard for Energy and Environmental Design) framework. Three recently built apartment building complexes were chosen as study objects for the quantitative evaluation of the buildings in terms of their embodied environmental impacts (global warming potential, acidification potential, eutrophication potential, ozone layer depletion potential, photochemical oxidant creation potential, and abiotic depletion potential), using the LCA approach. Additionally, we analyzed the emission trends according to the cut-off criteria of the six environmental impact categories by performing an S-LCA with cut-off criteria 90–99% of the cumulative weight percentile. Consequently, we were able to present the cut-off criterion best suited for S-LCA and analyze the effect of the cut-off criteria on the environmental impact analysis results. A comprehensive environmental impact analysis of the characteristics of the six environmental impact categories revealed that the error rate was below 5% when the cut-off criterion of 97.5% of the cumulative weight percentile was applied, thus verifying its validity as the optimal cut-off criterion for S-LCA.

Der Umsatz-Nachhaltigkeitsindex*/The Turnover-Sustainability-Index

2016 ◽  
Vol 106 (03) ◽  
pp. 136-140
Author(s):  
R. Miehe ◽  
M. Wiedenmann ◽  
T. Prof. Bauernhansl
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Sustainability Index ◽  
Behavior Based ◽  
Comparative Examination

Die Ökobilanz hat sich als Instrument zur Bewertung der Umweltauswirkungen von Produkten und Prozessen durchgesetzt. Dennoch stellt ihre Durchführung Nutzer immer wieder vor Herausforderungen. Der Fachartikel präsentiert einen Ansatz für eine vergleichende Betrachtung der ökologischen Auswirkungen des unternehmerischen Handelns auf Basis der jeweiligen Unternehmens- und Branchenumsätze. Der Umsatz-Nachhaltigkeitsindex soll als Konzept für ein Benchmark für Unternehmen einer Branche dienen.   Life Cycle Assessment has prevailed as an instrument to evaluate the environmental impact of products and processes. Its execution, however, poses a challenge to operators. In this paper, we present an approach for a comparative examination of environmental impacts of industrial behavior based on the turnover of companies and their equivalent sectors. The Turnover-Sustainability-Index serves as a benchmark for companies within a sector.

scholarly journals Strategies to Improve the Energy Performance of Buildings: A Review of Their Life Cycle Impact

Buildings ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 105 ◽  
Author(s):  
Nadia MIRABELLA ◽  
Martin RÖCK ◽  
Marcella Ruschi Mendes SAADE ◽  
Carolin SPIRINCKX ◽  
Marc BOSMANS ◽  
...  
Keyword(s):  
Life Cycle ◽  
Case Studies ◽  
Environmental Impacts ◽  
Energy Use ◽  
Ghg Emissions ◽  
Energy Performance ◽  
Environmental Benefits ◽  
Embodied Energy ◽  
Trade Offs ◽  
Operational Energy

Globally, the building sector is responsible for more than 40% of energy use and it contributes approximately 30% of the global Greenhouse Gas (GHG) emissions. This high contribution stimulates research and policies to reduce the operational energy use and related GHG emissions of buildings. However, the environmental impacts of buildings can extend wide beyond the operational phase, and the portion of impacts related to the embodied energy of the building becomes relatively more important in low energy buildings. Therefore, the goal of the research is gaining insights into the environmental impacts of various building strategies for energy efficiency requirements compared to the life cycle environmental impacts of the whole building. The goal is to detect and investigate existing trade-offs in current approaches and solutions proposed by the research community. A literature review is driven by six fundamental and specific research questions (RQs), and performed based on two main tasks: (i) selection of literature studies, and (ii) critical analysis of the selected studies in line with the RQs. A final sample of 59 papers and 178 case studies has been collected, and key criteria are systematically analysed in a matrix. The study reveals that the high heterogeneity of the case studies makes it difficult to compare these in a straightforward way, but it allows to provide an overview of current methodological challenges and research gaps. Furthermore, the most complete studies provide valuable insights in the environmental benefits of the identified energy performance strategies over the building life cycle, but also shows the risk of burden shifting if only operational energy use is focused on, or when a limited number of environmental impact categories are assessed.

scholarly journals Reuse of Barley Straw for Handmade Paper Production

2021 ◽  
Author(s):  
Alma Delia Delia Román Gutiérrez ◽  
Juan Hernandez Avila ◽  
Antonia Karina Vargas M. ◽  
Eduardo Cerecedo Saenz ◽  
Eleazar Salinas-Rodríguez
Keyword(s):  
Life Cycle ◽  
Environmental Impact ◽  
Environmental Impacts ◽  
Waste Treatment ◽  
Raw Material ◽  
Barley Straw ◽  
Handmade Paper ◽  
Organic Solid Waste ◽  
Organic Solid ◽  
Spent Grain

Usually in the manufacture of beer by fermentation of barley, in both industrialized and developing countries significant amounts of organic solid waste are produced from barley straw. These possibly have an impact on the carbon footprint with an effect on global warming. According to this, it is important to reduce environmental impact of these solid residues, and an adequate way is the recycling using them as raw material for the elaboration of handmade paper. Therefore, it is required to manage this type of waste by analyzing the environmental impact, and thus be able to identify sustainable practices for the treatment of this food waste, evaluating its life cycle, which is a useful methodology to estimate said environmental impacts. It is because of this work shows the main results obtained using the life cycle analysis (LCA) methodology, to evaluate the possible environmental impacts during the waste treatment of a brewery located in the state of Hidalgo, Mexico. The residues evaluated were barley straw, malt residues and spent grain, and at the end, barley straw was selected to determine in detail its environmental impact and its reuse, the sheets analyzed presented a grammage that varies from 66 g/m2 and 143 g/m2, resistance to burst was 117 to 145 kpa, with a crystallinity of 34.4% to 37.1%.

scholarly journals Environmental Impact for 3D Bone Tissue Engineering Scaffolds Life Cycle: An Assessment

2021 ◽  
Vol 12 (5) ◽  
pp. 6504-6515
Keyword(s):  
Tissue Engineering ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impact ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Environmental Impacts ◽  
Tissue Engineering Scaffolds ◽  
Industrial Soil ◽  
The Impact

With the development of additive manufacturing technology, 3D bone tissue engineering scaffolds have evolved. Bone tissue engineering is one of the techniques for repairing bone abnormalities caused by a variety of circumstances, such as injuries or the need to support damaged sections. Many bits of research have gone towards developing 3D bone tissue engineering scaffolds all across the world. The assessment of the environmental impact, on the other hand, has received less attention. As a result, the focus of this study is on developing a life cycle assessment (LCA) model for 3D bone tissue engineering scaffolds and evaluating potential environmental impacts. One of the methodologies to evaluating a complete environmental impact assessment is life cycle assessment (LCA). The cradle-to-grave method will be used in this study, and GaBi software was used to create the analysis for this study. Previous research on 3D bone tissue engineering fabrication employing poly(ethylene glycol) diacrylate (PEGDA) soaked in dimethyl sulfoxide (DMSO), and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide (TPO) as a photoinitiator will be reviewed. Meanwhile, digital light processing (DLP) 3D printing is employed as the production technique. The GaBi program and the LCA model developed to highlight the potential environmental impact. This study shows how the input and output of LCA of 3D bone tissue engineering scaffolds might contribute to environmental issues such as air, freshwater, saltwater, and industrial soil emissions. The emission contributing to potential environmental impacts comes from life cycle input, electricity and transportation consumption, manufacturing process, and material resources. The results from this research can be used as an indicator for the researcher to take the impact of the development of 3D bone tissue engineering on the environment seriously.

Investigation of the two-decade environmental impact of large-scale agricultural cultivation and its impact on climate change in the Lajta-Project

2021 ◽  
Author(s):  
András Polgár ◽  
Karolina Horváth ◽  
Imre Mészáros ◽  
Adrienn Horváth ◽  
András Bidló ◽  
...  
Keyword(s):  
Climate Change ◽  
Life Cycle ◽  
Environmental Impact ◽  
Winter Wheat ◽  
Environmental Impacts ◽  
Crop Production ◽  
Large Scale ◽  
Winter Barley ◽  
Cultivated Plants ◽  
Agricultural Activity

<p>Crop production is applied on about half of Hungary’s land area, which amounts to approximately 4.5 million hectares. The agricultural activity has significant environmental impacts.</p><p>Our work aims the time series investigation of the impacts of large-scale agricultural cultivation<strong> </strong>on environment and primarily on climate change in<strong> </strong>the test area by applying environmental life cycle assessment (LCA) method.</p><p>The investigated area of Lajta Project can be found in the triangle formed by the settlements Mosonszolnok, Jánossomorja and Várbalog, in the north-western corner of Hungary, in Győr-Moson-Sopron county. The area has intense agri-environment characteristics, almost entirely lacking of grasslands and meadows.</p><p>We were looking for the answer to the question “To what extent does agricultural activity on this area impact the environment and how can it contribute to climate change during a given period?” The selection of the plants included in the analysis was justified by their significant growing area. We analysed the cultivation data of 5 crops: canola, winter barley, winter wheat, green maize and maize. Material flows of arable crop production technologies were defined in time series by the agricultural parcel register data. These covered the size of the area actually cultivated, the operational processes, records on seeds, fertilizer and pesticide use and harvest data by parcels. The examined environmental inventory database contained also the fuel consumption and lubricating oil usage of machine operations, and the water usage of chemical utilization.</p><p>In the life cycle modelling of cultivation, we examined 13 years of maize, 20 years of green maize, 20 years of winter barley, 18 years of winter wheat and 15 years of canola data calculated on 1 ha unit using GaBi life cycle analysis software.</p><p>In addition, we also calculated by an average cultivation model for all cultivated plants with reference data to 1 ha and 1 year period.</p><p>We applied methods and models in our life cycle impact assessment. According to the values of the impact categories, we set up the following increasing environmental ranking of plant cultivation: (1) canola has minimum environmental impacts followed by (2) green maize and (3) maize with slightly higher values, (4) winter barley has 6 times higher values preceded by (5) winter wheat with a slight difference. The previous environmental ranking of the specific cultivated plants’ contribution was also confirmed as regards the overall environmental impact: canola (1.0%) – green maize (4.9%) – maize (7.1%) – winter barley (43.1%) – winter wheat (44.0%).</p><p>Environmental impact category indicator results cumulated to total cultivation periods and total crop growing areas (quantitative approach) display the specific environmental footprints by crops. Increasing environmental ranking of environmental impacts resulted from cultivating the sample area is the following: (1) canola – (2) maize – (3) green maize – (4) winter barley – (5) winter wheat. The slight difference resulted in the rankings in quantitative approach according to the rankings of territorial approach on the investigated area is due to the diversity of cultivation time factor and the crop-growing parameter of the specific crops.</p><p>Acknowledgement: Our research was supported by the „Lajta-Project”.</p>

Sign in / Sign up

Export Citation Format

Share Document