Resistivity Behavior of Concrete Mixtures with Included Supplementary Cementitious Materials

Author(s):  
Cody Shults ◽  
Julie Hartell
Author(s):  
Cameron Wilson ◽  
W. Jason Weiss

High early strength (HES) concrete patching materials are increasingly used to repair damaged pavements. The use of HES concrete enables the repaired pavement to be opened to traffic shortly after the repair has been installed; for example, opening pavements to traffic 4–6 h after the concrete is placed is becoming more common. HES concrete mixtures are typically designed with a low water-to-cement ratio and a high cement content; they contain accelerating admixtures and limited supplementary cementitious materials. As a result, these HES patches may be susceptible to self-desiccation, causing autogenous shrinkage and early age cracking. Self-desiccation can lead to reduced hydration, limited strength gain, and overestimation of strength development in maturity-based predictions. The objectives of this study are threefold. First, the paper will illustrate how self-desiccation can lead to the premature cessation of hydration and increased potential for shrinkage cracking. Second, the paper will illustrate how maturity-based predictions can be modified to account for self-desiccation. Third, internal curing is discussed as a way to mitigate self-desiccation and shrinkage ultimately improving the performance of HES concrete patching materials.


2020 ◽  
Vol 853 ◽  
pp. 193-197
Author(s):  
Samer Al Martini ◽  
Ziad Hassan ◽  
Ahmad Khartabil

The effects of aggregate size and supplementary cementitious materials (SCMs) on the rheology of self-consolidating concrete (SCC) were studied in this paper. Two main concrete mixtures with different maximum aggregate sizes were prepared and investigated. The first mix had a maximum size aggregate of 5 mm and the second mix was with 20 mm max size aggregates. All mixes incorporated different dosages of Ground granulated blast furnace slag (GGBS). The rheology of all mixes investigated was measured over 2 hour time period. It was found that the size of aggregates and GGBS dosage have influence on the yield stress of studied concrete mixes.


2014 ◽  
Vol 660 ◽  
pp. 162-167
Author(s):  
Elbachir Elbahi ◽  
Sidi Mohammed El Amine Boukli Hacene

The resonance frequency method is one of many non-destructive tests which allow us to evaluate construction materials. It was used to determine the dynamic properties of concrete, required in structures design and control, also considered as the key elements for materials dynamic. In this study, we chose a non-destructive approach to quantify-in laboratory-, the influence of adding “crushed limestone” and “natural pozzolan” on local concrete’s dynamic characteristics. However, several concrete mixtures have been prepared with limestone aggregates. The experimental used plan, allowed us to determine the dynamic modulus of elasticity, the dynamic modulus of rigidity of different formulated concretes.


2021 ◽  
Author(s):  
Gilson Lomboy ◽  
Douglas Cleary ◽  
Seth Wagner ◽  
Yusef Mehta ◽  
Danielle Kennedy ◽  
...  

Dwindling supplies of natural concrete aggregates, the cost of landfilling construction waste, and interest in sustainable design have increased the demand for recycled concrete aggregates (RCA) in new portland cement concrete mixtures. RCA repurposes waste material to provide useful ingredients for new construction applications. However, RCA can reduce the performance of the concrete. This study investigated the effectiveness of ternary blended binders, mixtures containing portland cement and two different supplementary cementitious materials, at mitigating performance losses of concrete mixtures with RCA materials. Concrete mixtures with different ternary binder combinations were batched with four recycled concrete aggregate materials. For the materials used, the study found that a blend of portland cement, Class C fly ash, and blast furnace slag produced the highest strength of ternary binder. At 50% replacement of virgin aggregates and ternary blended binder, some specimens showed comparable mechanical performance to a control mix of only portland cement as a binder and no RCA substitution. This study demonstrates that even at 50% RCA replacement, using the appropriate ternary binder can create a concrete mixture that performs similarly to a plain portland cement concrete without RCA, with the added benefit of being environmentally beneficial.


2021 ◽  
Vol 920 (1) ◽  
pp. 012014
Author(s):  
R M K Tahara ◽  
M H Hasnan ◽  
N Z N Azizan

Abstract Conventional construction materials are considered as exploitation to natural resources. Thus, numerous alternative materials using natural or waste materials are proposed for concrete production as a response for greener, renewable and biodegradable environments with regard to sustainability. Natural fibre such as bamboo has been rapidly proposed for many applications especially for concrete production in construction. In order to tackle the environmental issues and focusing on sustainability, natural fibre of Beting bamboo is proposed for partial replacement used as supplementary cementitious materials. Current study investigates the partial replacement of coarse aggregate with Beting bamboo in concrete mixtures. The outcome of the study discovers that through the mix design, replacing 5% by weight of Beting bamboo is an ideal % to achieve concrete mixture for structural and nonstructural application. However, with the increase % of Beting bamboo for partial replacement, the strength of the concrete gradually decreased.


2010 ◽  
Vol 5 (4) ◽  
pp. 111-120
Author(s):  
John T Kevern

As green building rating systems such as LEED™ become more popular, the use of recycled materials in construction is increasing. Concrete can be produced with significant quantities of supplementary cementitious materials or recycled aggregate materials. However, modifying concrete mixture proportions for improved recycled content credits also impacts strength and long-term durability. Without properly understanding the effects recycled materials have on concrete, greener concrete can be less desirable from a lifecycle perspective from poor durability. This research investigates the impacts different types and quantities of supplementary cementitious materials and recycled concrete aggregate have on strength development and concrete durability, specifically deicer scaling. Improvements to deicer scaling resistance were investigated using a novel soybean oil sealer. The concrete mixtures were also evaluated within the LEED™ recycled materials criteria for selection based on economy and total contribution value. Considerations are included to assist designers in the selection of greener concrete mixtures for appropriate applications.


2020 ◽  
Vol 995 ◽  
pp. 168-173
Author(s):  
Zdeněk Prošek ◽  
Vladimír Hrbek ◽  
Petr Bílý ◽  
Lukáš Vráblík

The advantages of supplementary cementitious materials (SCM) use in concrete, such as reduced cement consumption and overall material improvement (durability, chemical resistance, etc.), are widely known. Our research focuses on two major factors connected to high performance concrete (HPC) containing SCM, the content of selected SCM and the homogenization process used for concrete mixture. Both of these aspects of this research were addressed by the authors from macro-level of the material. In this contribution, the focus is directed on microscopical performance of concrete mixtures with highest macro-mechanical features with respect to both homogenization procedure and SCM containment.


Materials ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3674
Author(s):  
Petr Lehner ◽  
Petr Konečný ◽  
Pratanu Ghosh

The numerical modelling of chloride penetration into concrete is very sensitive to the correct description of the input data. In the recent era, high-performance concrete (HPC), which combines Portland cement and other supplementary cementitious materials, has been gaining attraction due to their desirable material properties and durability. The presented results show the application of the modified approach for the evaluation of the suitability of the time-dependent model for the variation of the diffusion coefficient. The 26 various binary and ternary-based concrete mixtures blended with volcanic pumice pozzolan (VPP) as a major supplementary cementitious material (SCM) are compared with the reference Ordinary Portland Cement mixture. Other SCMs namely fly ash, slag, silica fume, and metakaolin were also utilized in ternary-based concrete mixtures. In-depth statistical analysis was carried out to show the variability and effects of the amount of the volcanic pumice as an SCM on the diffusion coefficient. The mean value and regression via linear approximation of the time-dependent coefficient of variation of the diffusion coefficients were used as well as the Root of Mean Squared Error approach. The presented results are suitable as the component of the input parameters for the durability-related probabilistic assessment of the reinforced concrete structures exposed to chlorides. In addition, the time-dependent ultimate limit state-related data was presented.


2021 ◽  
Vol 877 (1) ◽  
pp. 012045
Author(s):  
Raid Hussian

Abstract Cement is amongst the most polluting materials utilized in the building sector, contributing to a variety of hazardous pollutants, including greenhouse gas emissions. This raises health impacts related to the manufacture of cement. As a result, a substitute substance for conventional cement with low environmental effects and better building characteristics is required. The purpose of the study would be to look at the consequences of using supplementary cementitious materials (SCMS) to substitute cement in a concrete mix partially. This study employed silica fume (SF) and cement kiln dust (CKD) as supplementary cementitious materials. Several concrete mixtures were created by substituting cement by a combination of SF and CKD in three proportions which that 25%, 35%, and 45% within curing periods of (one week and four weeks); the concrete mixtures were tested. The ultrasonic pulse velocity (UPV) test has been used to investigate the concrete mixture’s strength in this study. The findings show that the optimal proportion of SF replacement cement and CKD involvement ranged from 25% to 35%. The pulse velocity of specimens improves when the proportion of CKD and SF increases to the optimal percentage, while the larger amounts of these by-products begin to lower the pulse velocity of specimens.


2021 ◽  
Vol 33 (1) ◽  
pp. 04020397
Author(s):  
Mohammed H. Alyami ◽  
Hossein Mosavi ◽  
Raid S. Alrashidi ◽  
Mohammed A. Almarshoud ◽  
Christopher C. Ferraro ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document