scholarly journals Performance of Beting Bamboo (Gigantochloa Levis) as Partial Replacement for Coarse Aggregate in Concrete

2021 ◽  
Vol 920 (1) ◽  
pp. 012014
Author(s):  
R M K Tahara ◽  
M H Hasnan ◽  
N Z N Azizan
Keyword(s):  
Coarse Aggregate ◽  
Construction Materials ◽  
Environmental Issues ◽  
Cementitious Materials ◽  
Natural Fibre ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Concrete Mixtures ◽  
Concrete Production ◽  
Alternative Materials

Abstract Conventional construction materials are considered as exploitation to natural resources. Thus, numerous alternative materials using natural or waste materials are proposed for concrete production as a response for greener, renewable and biodegradable environments with regard to sustainability. Natural fibre such as bamboo has been rapidly proposed for many applications especially for concrete production in construction. In order to tackle the environmental issues and focusing on sustainability, natural fibre of Beting bamboo is proposed for partial replacement used as supplementary cementitious materials. Current study investigates the partial replacement of coarse aggregate with Beting bamboo in concrete mixtures. The outcome of the study discovers that through the mix design, replacing 5% by weight of Beting bamboo is an ideal % to achieve concrete mixture for structural and nonstructural application. However, with the increase % of Beting bamboo for partial replacement, the strength of the concrete gradually decreased.

Suitability of Cordia millenii Ash Blended Cement in Concrete Production

2016 ◽  
Vol 22 ◽  
pp. 59-67 ◽  
Author(s):  
Olusola Emmanuel Babalola ◽  
Paul O. Awoyera
Keyword(s):  
Compressive Strength ◽  
Setting Time ◽  
Blended Cement ◽  
Cementitious Materials ◽  
Strength Properties ◽  
Supplementary Cementitious Materials ◽  
Sieve Analysis ◽  
Concrete Production ◽  
Alternative Materials ◽  
Concrete Control

Supplementary cementitious materials are most needed to enhance a sustainable development in poor communities. It is pertinent to investigate the suitability of such alternative materials for construction. The present study evaluates the strength characteristics of concrete made with varied proportion of Cordia millenii ash blended with Portland cement. Chemical composition of Cordia millenii and the setting time when blended with cement was determined. Other laboratory tests performed on Cordia millenii blended cement include: sieve analysis and specific gravity. Five replacement percentages of Cordia millenii (5%, 10%, 15%, and 20%) were blended with cement in concrete. Control specimens were also produced with only cement. Tests to determine the workability, air entrained, bulk density and compressive strength properties of the concrete were also conducted. Results obtained revealed that optimum Cordia millenii mix is 10%, which yielded the highest density and compressive strength in the concrete.

Application of Zeolite as a Partial Replacement of Cement in Concrete Production

2014 ◽  
Vol 621 ◽  
pp. 30-34
Author(s):  
Eva Vejmelková ◽  
Dana Koňáková ◽  
Monika Čáchová ◽  
Martin Keppert ◽  
Adam Hubáček ◽  
...  
Keyword(s):  
Portland Cement ◽  
Natural Zeolite ◽  
General Rule ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Large Variability ◽  
Substitution Level ◽  
Concrete Production ◽  
Zeolite Rock

Natural zeolite rocks are known to be able to act as Supplementary Cementitious Materials (SCM) in Portland cement based concrete. Generally SCMs are reacting with portlandite and providing binding hydration products just as Portland cement does. In this way an SCM can substitute certain amount of Portland cement in concrete and thus reduce the related energy consumption and CO2 generation. Due to a large variability of SCMs composition and properties there is not any general rule for an optimum Portland cement substitution level. In this paper, the influence of natural zeolite rock on selected mechanical, hygric and thermal properties of concrete is studied. Experimental results show that the analyzed zeolite is acting as a pozzolan but for higher amounts its application leads to an increase in concrete porosity which affects its properties in a significant way.

Influence of the Supplementary Cementitious Materials on the Dynamic Properties of Concrete

2014 ◽  
Vol 660 ◽  
pp. 162-167
Author(s):  
Elbachir Elbahi ◽  
Sidi Mohammed El Amine Boukli Hacene
Keyword(s):  
Dynamic Modulus ◽  
Dynamic Properties ◽  
Construction Materials ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Natural Pozzolan ◽  
Frequency Method ◽  
Concrete Mixtures ◽  
And Control ◽  
Non Destructive

The resonance frequency method is one of many non-destructive tests which allow us to evaluate construction materials. It was used to determine the dynamic properties of concrete, required in structures design and control, also considered as the key elements for materials dynamic. In this study, we chose a non-destructive approach to quantify-in laboratory-, the influence of adding “crushed limestone” and “natural pozzolan” on local concrete’s dynamic characteristics. However, several concrete mixtures have been prepared with limestone aggregates. The experimental used plan, allowed us to determine the dynamic modulus of elasticity, the dynamic modulus of rigidity of different formulated concretes.

scholarly journals Agricultural Solid Waste as Source of Supplementary Cementitious Materials in Developing Countries

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1112 ◽  
Author(s):  
Suvash Chandra Paul ◽  
Peter Mbewe ◽  
Sih Kong ◽  
Branko Šavija
Keyword(s):  
Developing Countries ◽  
Cementitious Materials ◽  
Agricultural Wastes ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Engineering Properties ◽  
Partial Replacement ◽  
Cement Production ◽  
Cement Replacement ◽  
Concrete Production

Concrete production utilizes cement as its major ingredient. Cement production is an important consumer of natural resources and energy. Furthermore, the cement industry is a significant CO2 producer. To reduce the environmental impact of concrete production, supplementary cementitious materials such as fly ash, blast furnace slag, and silica fume are commonly used as (partial) cement replacement materials. However, these materials are industrial by-products and their availability is expected to decrease in the future due to, e.g., closing of coal power plants. In addition, these materials are not available everywhere, for example, in developing countries. In these countries, industrial and agricultural wastes with pozzolanic behavior offer opportunities for use in concrete production. This paper summarizes the engineering properties of concrete produced using widespread agricultural wastes such as palm oil fuel ash, rice husk ash, sugarcane bagasse ash, and bamboo leaf ash. Research on cement replacement containing agricultural wastes has shown that there is great potential for their utilization as partial replacement for cement and aggregates in concrete production. When properly designed, concretes containing these wastes have similar or slightly better mechanical and durability properties compared to ordinary Portland cement (OPC) concrete. Thus, successful use of these wastes in concrete offers novel sustainable materials and contributes to greener construction as it reduces the amount of waste, while also minimizing the use of virgin raw materials for cement production. This paper will help the concrete industry choose relevant waste products and their optimum content for concrete production. Furthermore, this study identifies research gaps which may help researchers in further studying concrete based on agricultural waste materials.

scholarly journals Use of Cement Kiln Dust and Silica Fume as partial replacement for cement in concrete

2021 ◽  
Vol 877 (1) ◽  
pp. 012045
Author(s):  
Raid Hussian
Keyword(s):  
Silica Fume ◽  
Ultrasonic Pulse Velocity ◽  
Cementitious Materials ◽  
Pulse Velocity ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Cement Kiln Dust ◽  
Cement Kiln ◽  
Concrete Mixtures ◽  
Kiln Dust

Abstract Cement is amongst the most polluting materials utilized in the building sector, contributing to a variety of hazardous pollutants, including greenhouse gas emissions. This raises health impacts related to the manufacture of cement. As a result, a substitute substance for conventional cement with low environmental effects and better building characteristics is required. The purpose of the study would be to look at the consequences of using supplementary cementitious materials (SCMS) to substitute cement in a concrete mix partially. This study employed silica fume (SF) and cement kiln dust (CKD) as supplementary cementitious materials. Several concrete mixtures were created by substituting cement by a combination of SF and CKD in three proportions which that 25%, 35%, and 45% within curing periods of (one week and four weeks); the concrete mixtures were tested. The ultrasonic pulse velocity (UPV) test has been used to investigate the concrete mixture’s strength in this study. The findings show that the optimal proportion of SF replacement cement and CKD involvement ranged from 25% to 35%. The pulse velocity of specimens improves when the proportion of CKD and SF increases to the optimal percentage, while the larger amounts of these by-products begin to lower the pulse velocity of specimens.

scholarly journals STUDY ON UTILIZATION OF ZEOLITE AND STONE DUST IN CONCRETE

2020 ◽  
Vol 4 (5) ◽  
pp. 93-97
Author(s):  
Leela Prasanth U ◽  
Karan Kumar H ◽  
Afzal Basha Syed
Keyword(s):  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Split Tensile Strength ◽  
Natural Sand ◽  
Pozzolanic Material ◽  
Fine Aggregates ◽  
Stone Dust ◽  
Alternative Materials

Concrete is a compound material composed of fine aggregates and coarse aggregate bonded together with fluid cement that hardens over time.The deficit of natural sand arises the need of alternative materials for replacement of natural sand. The squashed stone residue which is locally accessible modern strong waste material is ordinarily utilized as a fine aggregate in concrete. In the current examination, an exploratory program was carried out to consider the compressive and split tensile quality of concrete made utilizing stone residue as halfway substitution of fine aggregate at an increment of 10%. Zeolite is a pozzolanic material and its pozzolanic action improves the compressivestrength of concrete. Natural zeolites are supplementary cementitious materials. By adding zeolite, the investigation on the experiments will be carried out to determine the compressive strength and split tensile strength of concrete made using zeolite as partial replacement of cement up to 20 percent at an interval of 5 percent just as the way Stone dust is being replaced to achieve the objective of the project, M30 grade of concrete is prepared. The cube and cylindrical samples shall be tested after a curing period of 7 & 28 days.

scholarly journals EFFECT OF VOLCANIC ASH AS PARTIAL REPLACEMENT OF CEMENT IN CONCRETE SUBJECT TO AGGRESSIVE CHEMICAL ENVIRONEMNT

2021 ◽  
Vol 6 (5) ◽  
Author(s):  
Agboola Shamsudeen Abdulazeez ◽  
Amina Omolola Suleiman ◽  
Simdima Gabriel Gideon ◽  
Solomon Wutong Poki
Keyword(s):  
Compressive Strength ◽  
Volcanic Ash ◽  
Setting Time ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Target Strength ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Split Tensile Strength ◽  
Concrete Production

- Presently researches all over the world is concentrating on alternative materials as partial cement replacement in concrete production. The use of pozzolanic material in concrete is becoming increasingly important because of the need for more sustainable cementing products. Volcanic ash is a form of natural pozzolan and has a chemical composition comparable to other supplementary cementitious materials. In this paper, volcanic ash was used to partially replace cement in the ratio of 0%, 5%, 10%, 15% and 20% by volume in concrete and cured in H2SO4 and MgSO4 environment. 28-day target strength was adopted and concrete tested at 7, 14, 28 and 56 days’ hydration period. Specific gravity, bulk density and setting time test on volcanic ash were carried out. Fresh concrete tests such as slump and compacting factor test were carried out along-side hardened concrete tests like compressive strength and split tensile strength. The result shows that the maximum compressive strength at 28 days was at 0% control concrete, while at 56 days the maximum strength was observed at 10% replacement of cement with volcanic ash and it is considered as optimum percentage replacement.

scholarly journals Mechanical Properties of Concrete with Substitution of Fine and Coarse Aggregate by Waste Materials in Concrete

2019 ◽  
Vol 8 (4) ◽  
pp. 5817-5820
Keyword(s):  
Mechanical Properties ◽  
Coarse Aggregate ◽  
Construction Materials ◽  
Copper Slag ◽  
Waste Materials ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
River Sand ◽  
Aggregate Concrete ◽  
Concrete Mixtures

Paper Construction industry has been conducted various studies on the utilization of waste materials in concrete productions in order to decrease the usage of natural resources. This research paper exhibits the evaluation and the effective reuse of waste construction materials and industries, such as cuddapah waste aggregate as partial replacement of conventional coarse aggregate and copper slag as partial replacement of river sand (fine aggregate). Experiments were conducted to find out the mechanical properties of concrete such as compressive, splitting tensile, flexural strengths and the modulus of elasticity of concrete for waste materials aggregate concrete and to compare them with those of conventional aggregate concrete. Results appear that waste materials in concrete have the potential to produce good quality concrete mixtures.

scholarly journals Use of Treated Non-Ferrous Metallurgical Slags as Supplementary Cementitious Materials in Cementitious Mixtures

2021 ◽  
Vol 11 (9) ◽  
pp. 4028
Author(s):  
Asghar Gholizadeh Vayghan ◽  
Liesbeth Horckmans ◽  
Ruben Snellings ◽  
Arne Peys ◽  
Priscilla Teck ◽  
...  
Keyword(s):  
Mechanical Performance ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Strength Development ◽  
Supplementary Cementitious Material ◽  
Performance Requirements ◽  
Metallurgical Slags ◽  
Leaching Behaviour ◽  
Kinetics Of

This research investigated the possibility of using metallurgical slags from the copper and lead industries as partial replacement for cement. The studied slags were fayalitic, having a mainly ferro-silicate composition with minor contents of Al2O3 and CaO. The slags were treated at 1200–1300 °C (to reduce the heavy metal content) and then granulated in water to promote the formation of reactive phases. A full hydration study was carried out to assess the kinetics of reactions, the phases formed during hydration, the reactivity of the slags and their strength activity as supplementary cementitious material (SCM). The batch-leaching behaviour of cementitious mixtures incorporating treated slags was also investigated. The results showed that all three slags have satisfactory leaching behaviour and similar performance in terms of reactivity and contribution to the strength development. All slags were found to have mediocre reactivity and contribution to strength, especially at early ages. Nonetheless, they passed the minimum mechanical performance requirements and were found to qualify for use in cement.

scholarly journals The Potentials of Iron and Steel Slags as Supplementary Cementitious Materials in the Nigerian Construction Industry: A Review

2018 ◽  
Vol 2 (2) ◽  
pp. 208-218
Author(s):  
O. R. Ogirigbo ◽  
J. O. Ukpata ◽  
I. Inerhunwa
Keyword(s):  
Portland Cement ◽  
Construction Industry ◽  
Waste Product ◽  
Steel Production ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Partial Replacement ◽  
Iron And Steel ◽  
Tropical Environments ◽  
Iron And Steel Production

Ground Granulated Blast Furnace Slag (GGBS) is a type of Supplementary Cementitious Material (SCM) that is currently being used extensively in the global construction industry. SCMs are cheaper than Portland cement, help to improve certain properties of concrete and also help to reduce the environmental footprint associated with the production of Portland cement. GGBS is readily available in most parts of the world as a waste product from iron and steel production. However, its use as a SCM in some countries has not been fully maximized. This is primarily because of lack of documented studies on the properties of GGBS that influences its suitability as a SCM, especially in tropical environments. This paper reviewed the use of GGBS as a SCM for the partial replacement of Portland cement, with particular emphasis on its potential use in tropical warm environments such as Nigeria and other similar countries.

Sign in / Sign up

Export Citation Format

Share Document