scholarly journals Investigate the Effect of the Magnetic Field on the Mechanical Properties of Silicone Rubber-Based Anisotropic Magnetorheological Elastomer during Curing Process

2020 ◽  
Vol 8 (11) ◽  
pp. 1411-1427
Author(s):  
Tao Li ◽  
Ali Abd El-Aty ◽  
Cheng Cheng ◽  
Yizhou Shen ◽  
Cong Wu ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Silicone Rubber ◽  
Curing Process ◽  
Magnetorheological Elastomer ◽  
The Magnetic Field

Modelling and experimental characterisation of a compressional adaptive magnetorheological elastomer isolator

2021 ◽  
pp. 107754632110253
Author(s):  
Emiliano Rustighi ◽  
Diego F Ledezma-Ramirez ◽  
Pablo E Tapia-Gonzalez ◽  
Neil Ferguson ◽  
Azrul Zakaria
Keyword(s):  
Magnetic Field ◽  
Silicone Rubber ◽  
Magnetic Interaction ◽  
Iron Particle ◽  
Material Model ◽  
Rubber Matrix ◽  
Magnetorheological Elastomer ◽  
Volume Percentage ◽  
Shock Absorbers ◽  
Percent Concentration

This article proposes a simple physical-based model to describe and predict the performance of axially compressed magnetorheological elastomer cylinders used as vibration and shock absorbers. The model describes the magnetorheological elastomer macroscopic stiffness changes because of an externally applied magnetic field from a microscopic composite cell of silicone rubber and carbonyl iron particle. Despite neglecting the material hyperelasticity, anisotropy and adjacent magnetic interaction, the model describes effectively the effect of the magnetic field on the macroscopic modulus of elasticity. The changes in the mechanical properties with the induced magnetic field are measured on samples of different particle concentration based on volume percentage, that is, 10 and 30 percent concentration of iron particles in a silicone rubber matrix. The manufacturing process of the samples is detailed, as well as the experimental validation of the effective stiffness change under a magnetic field in terms of transmissibility and mobility testing. However, the prediction seems to be limited by the linear elastic material model. Predictions and measurements are compared, showing that the model is capable of predicting the tunability of the dynamic/shock absorber and that the proposed devices have a possible application in the reduction of mechanical vibrations.

scholarly journals Tribological Evolution of the Superficial Layer and the Effects of the Magnetic Field to a Non- conventional Treated Steel, During Wear Tests

2018 ◽  
Vol 55 (3) ◽  
pp. 442-446
Author(s):  
Carmen Penelopi Papadatu ◽  
Andrei Victor Sandu ◽  
Marian Bordei ◽  
Ioan Gabriel Sandu ◽  
Sorin Ciortan
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Dry Friction ◽  
Experimental Tests ◽  
Superficial Layer ◽  
Alloyed Steel ◽  
Wear Process ◽  
The Magnetic Field ◽  
Wear Tests ◽  
Made In

The article focuses on the behavior of the non-conventional treated alloyed steel in magnetic field, during the dry wear tests. It is a review of the experimental tests from last years. The thermo-magnetic treatments have been applied before the application of a thermo-chemical treatment in plasma based on diffusion process. The study was made in order to improve the mechanical properties of the alloyed steel during the friction wear. Thermo-magnetic treatment applied before the plasma nitro-carburizing treatment improves the mechanical properties of the material especially in this case, for a steel that has a considerable content of Chromium (1.02%). The behavior was studied using X-Ray diffractometry of the superficial layers during the dry friction of wear process. The wear tests used an Amsler machine, during three hours of wear tests. After each hour of the wear tests the samples have been analyzed. The diffractometric characteristics of the superficial layers obtained after a complex array of thermo-magnetic and thermo-chemical in plasma treatments, the phases distribution, the content of the superficial layers and the behavior of the steel during the wear through dry friction tests, have been considered as criteria.

Studies of Magnetically Active Silicone Elastomers on a Vibrostend

2021 ◽  
Vol 1037 ◽  
pp. 141-147
Author(s):  
Andrey Minaev ◽  
Juri Korovkin ◽  
Hammat Valiev ◽  
G.V. Stepanov ◽  
Dmitry Yu. Borin
Keyword(s):  
Magnetic Field ◽  
Field Effect ◽  
Dynamic Properties ◽  
Experimental Studies ◽  
Magnetic Field Effect ◽  
Magnetorheological Elastomer ◽  
Silicone Elastomers ◽  
Damping Coefficients ◽  
Deformation Properties ◽  
The Magnetic Field

Experimental studies magnetorheological elastomer specimens dynamic properties under the magnetic fields action on the vibrostend are carried out. Amplitude-frequency characteristics have been obtained. The magnetic field effect on the silicone magnetoreactive elastomers deformation properties and damping coefficients experimentally is established.

scholarly journals Magnetorheological Hybrid Elastomers Based on Silicone Rubber and Magnetorheological Suspensions with Graphene Nanoparticles: Effects of the Magnetic Field on the Relative Dielectric Permittivity and Electric Conductivity

2019 ◽  
Vol 20 (17) ◽  
pp. 4201 ◽  
Author(s):  
Bica ◽  
Bunoiu
Keyword(s):  
Magnetic Field ◽  
Dielectric Permittivity ◽  
Silicone Rubber ◽  
Silicone Oil ◽  
Relative Dielectric Permittivity ◽  
Magnetorheological Elastomers ◽  
Magnetorheological Suspensions ◽  
Alternating Electric Field ◽  
Graphene Nanoparticles ◽  
The Magnetic Field

Hybrid magnetorheological elastomers (hMREs) were manufactured based on silicone rubber, silicone oil, carbonyl iron microparticles, graphene nanoparticles and cotton fabric. Using the hMREs, flat capacitors (FCs) were made. Using the installation described in this paper, the electrical capacitance and the coefficient of dielectric losses of the hMREs were measured as a function of the intensity of the magnetic field superimposed over an alternating electric field. From the data obtained, the electrical conductivity, the relative dielectric permittivity and magnetodielectric effects are determined. It is observed that the obtained quantities are significantly influenced by the intensity of the magnetic field and the amount of graphene used.

scholarly journals Effects of Static Magnetic Field on Compression Properties of Mg-Al-Gd Alloys Containing Gd-Rich Ferromagnetic Phase

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4957
Author(s):  
Qi Cai ◽  
Xinyao Li ◽  
Shukui Li ◽  
Chuan He ◽  
Xingwei Liu ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Secondary Phase ◽  
Magnetic Treatment ◽  
Ferromagnetic Phase ◽  
Air Cooling ◽  
Phase Constituent ◽  
Positive Effects ◽  
Compression Properties ◽  
The Magnetic Field

The Mg–0.6Al–20.8Gd (wt.%) alloys were homogenized at 620 °C for 20 min under 0 T and 1 T, followed by furnace cooling, quenching, and air cooling, respectively. The effects of the magnetic field on the phase constituent, microstructure, secondary phase precipitation, and mechanical properties of the Mg–Al–Gd alloys were investigated. The Mg–Al–Gd alloys contained α-Mg, Mg5Gd, Al2Gd, and GdH2 phases, and the phase constituents were hardly influenced by the applied magnetic field. However, the precipitation of the paramagnetic Mg5Gd upon cooling was accelerated by the magnetic field, and that of the ferromagnetic Al2Gd phases was inhibited. In addition, the Al2Gd phase was significantly refined and driven to segregate at the grain boundaries by the magnetic field, and the resultant pinning effect led to the microstructure change from dendritic α-Mg grains to rosette-like ones. When the magnetic field was only applied to the homogenization stage, the content of the Mg5Gd phase remained unchanged in the quenched alloy, whereas the Mg5Gd laths were significantly refined. By contrast, the contents of the Al2Gd and GdH2 phases were increased, while the precipitation sites were still within the α-Mg grains. The Mg5Gd laths were incapable of providing precipitation strengthening, while the Al2Gd and GdH2 particles brought positive effects on the enhancement of the mechanical properties. In the quenching condition, the hardness, compression strength, and ductility can be improved by the magnetic treatment, whereas these mechanical properties can be suppressed in the furnace cooled condition by the magnetic treatment.

scholarly journals Effects of an External Magnetic Field on the Microstructural and Mechanical Properties of the Fusion Zone in TIG Welding

Metals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 714 ◽  
Author(s):  
Anderson Vergílio de Queiroz ◽  
Márcio Teodoro Fernandes ◽  
Leonardo Silva ◽  
Rudineli Demarque ◽  
Carlos Roberto Xavier ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
External Magnetic Field ◽  
Vickers Microhardness ◽  
Mechanical Vibration ◽  
Welding Process ◽  
Charpy Impact ◽  
Delta Ferrite ◽  
Charpy Test ◽  
The Magnetic Field

Welding is a widely used process that requires continuous developments to meet new application demands of mechanical projects under severe conditions. The homogeneity of metallurgical and mechanical properties in welded joints is the key factor for any welding process. The applications of external magnetic fields, mechanical vibration, and ultrasound are the fundamental steps to achieve success in improving these properties. The present work aimed at determining suitable processing conditions to achieve the desired balance between metallurgical and mechanical properties of 304L steel in TIG (Tungsten Inert Gas) welding under the application of an external magnetic field. The microstructural characteristics of the weld bead were analyzed by optical microscopy (OM) and scanning electron microscopy (SEM). In order to evaluate the mechanical properties of the welded specimen, its Vickers microhardness map and Charpy impact energy at −20 °C were obtained. In addition, corrosion tests were carried out in the saline medium to compare the corrosion resistance of the joint with that of the base metal and that without the magnetic field. It was found that the external magnetic field decreased the percentage of delta ferrite, improved the filling of the weld pool with the weld metal, and decreased the primary and secondary dendritic spacings. The Vickers microhardness value under the magnetic field was found to be lower than that without the magnetic field, and the Charpy test showed no significant variation in energy absorption. Moreover, the welded joint produced under the external magnetic field manifested less resistance to corrosion.

Analysis of Vibration Characteristics of Magnetorheological Elastomer Sandwich Beam under Non-Homogeneous Magnetic Field

2011 ◽  
Vol 101-102 ◽  
pp. 202-206 ◽  
Author(s):  
Guo Liang Hu ◽  
Miao Guo ◽  
Wei Hua Li
Keyword(s):  
Magnetic Field ◽  
Natural Frequency ◽  
Sandwich Beam ◽  
Homogeneous Magnetic Field ◽  
Experimental Results ◽  
Magnetorheological Elastomer ◽  
Test Rig ◽  
Thin Aluminum ◽  
Set Up ◽  
The Magnetic Field

In this study, the MRE was manufactured, and the sandwich beam was also fabricated by treating with MRE between two thin aluminum layers. The experiment test rig was set up to investigate the vibration response of the MRE sandwich beam under non-homogeneous magnetic field. The experimental results show that the MRE sandwich beam had the capabilities of left shifting first natural frequency when the magnetic field was increased in the activated regions. It is also obvious that the first natural frequency of the MRE sandwich beam decreased as the magnetic field that applied on the beam was moved from the clamped end of the beam to the free end of the beam.

Magnetosensitive Polymer Composites and Effect of Magnetic Field Directivity on their Properties

2016 ◽  
Vol 251 ◽  
pp. 3-7 ◽  
Author(s):  
Egidijus Dragašius ◽  
Evguenia Korobko ◽  
Zoya Novikava ◽  
Elena Sermyazhko
Keyword(s):  
Magnetic Field ◽  
Mechanical Properties ◽  
Magnetic Properties ◽  
Polymer Composites ◽  
Matrix Material ◽  
Vertical Shear ◽  
Horizontal Shear ◽  
Dispersed Particles ◽  
The Magnetic Field ◽  
Ferromagnetic Particles

Mechanical properties of polymer composite materials, containing ferromagnetic small dispersed particles of carbonyl iron that create structures along force lines of the magnetic field have been investigated. In paper the influence of the polymer matrix material and the orientation of ferromagnetic particles inside it on the properties of polymer composites are considered in the regimes of horizontal shear, vertical shear and periodical (sinusoidal) deformation of the samples. Magnetic properties at the change of magnetic field induction B in the range of 0 to 1 T are determined.

Sign in / Sign up

Export Citation Format

Share Document