scholarly journals A framework for non-ICP lidar-based pose estimation using an optimally constrained 3D target

2021 ◽  
Author(s):  
Pierre Saint-Cyr
Keyword(s):  
Pose Estimation ◽  
Full Range ◽  
Point Clouds ◽  
Initial Guess ◽  
Measurement Noise ◽  
Lidar Data ◽  
Lidar Measurement ◽  
Camera System ◽  
Icp Algorithm ◽  
Scan Data

This thesis describes a non-ICP-based framework fohr [sic] the computation of a pose estimate of a special target shape from raw LIDAR scan data. In previous work, an ideal unambiguously-shaped 3D target (the Reduced Ambiguity Cuboctahedron, or RAC) was designed for use in LIDAR-based pose estimation. The RAC was designed to be used in an ICP algorithm, without an initial guess at the pose. This property is, however, not robust to LIDAR measurement noise and data artefacts. The pose estimation technique described in the present work is based upon the geometric non-ambiguity criteria used originally to design the target, and is robust to the aforementioned LIDAR data characteristics. This technique has been tested using simulated point clouds representing a full range of views of the RAC. The technique has been validated using real LIDAR scans of the RAC, generated at Neptec's Ottawa facility with their Laser Camera System (LCS). Experimental results using LCS data show that pose estimates can be generated with mean errors (relative to ICP) of 1.03 [deg] and 1.08 [mm], having standard deviations of 0.56 [deg] and 0.67 [mm] respectively.

scholarly journals A framework for non-ICP lidar-based pose estimation using an optimally constrained 3D target

2021 ◽  
Author(s):  
Pierre Saint-Cyr
Keyword(s):  
Pose Estimation ◽  
Full Range ◽  
Point Clouds ◽  
Initial Guess ◽  
Measurement Noise ◽  
Lidar Data ◽  
Lidar Measurement ◽  
Camera System ◽  
Icp Algorithm ◽  
Scan Data

This thesis describes a non-ICP-based framework fohr [sic] the computation of a pose estimate of a special target shape from raw LIDAR scan data. In previous work, an ideal unambiguously-shaped 3D target (the Reduced Ambiguity Cuboctahedron, or RAC) was designed for use in LIDAR-based pose estimation. The RAC was designed to be used in an ICP algorithm, without an initial guess at the pose. This property is, however, not robust to LIDAR measurement noise and data artefacts. The pose estimation technique described in the present work is based upon the geometric non-ambiguity criteria used originally to design the target, and is robust to the aforementioned LIDAR data characteristics. This technique has been tested using simulated point clouds representing a full range of views of the RAC. The technique has been validated using real LIDAR scans of the RAC, generated at Neptec's Ottawa facility with their Laser Camera System (LCS). Experimental results using LCS data show that pose estimates can be generated with mean errors (relative to ICP) of 1.03 [deg] and 1.08 [mm], having standard deviations of 0.56 [deg] and 0.67 [mm] respectively.

scholarly journals 3-D Point Cloud Registration Using Convolutional Neural Networks

2019 ◽  
Vol 9 (16) ◽  
pp. 3273 ◽  
Author(s):  
Wen-Chung Chang ◽  
Van-Toan Pham
Keyword(s):  
Pose Estimation ◽  
Point Cloud ◽  
Full Range ◽  
Point Clouds ◽  
Fixed Time ◽  
Training Data ◽  
Data Sets ◽  
Point Cloud Registration ◽  
Cloud Data ◽  
Model Point

This paper develops a registration architecture for the purpose of estimating relative pose including the rotation and the translation of an object in terms of a model in 3-D space based on 3-D point clouds captured by a 3-D camera. Particularly, this paper addresses the time-consuming problem of 3-D point cloud registration which is essential for the closed-loop industrial automated assembly systems that demand fixed time for accurate pose estimation. Firstly, two different descriptors are developed in order to extract coarse and detailed features of these point cloud data sets for the purpose of creating training data sets according to diversified orientations. Secondly, in order to guarantee fast pose estimation in fixed time, a seemingly novel registration architecture by employing two consecutive convolutional neural network (CNN) models is proposed. After training, the proposed CNN architecture can estimate the rotation between the model point cloud and a data point cloud, followed by the translation estimation based on computing average values. By covering a smaller range of uncertainty of the orientation compared with a full range of uncertainty covered by the first CNN model, the second CNN model can precisely estimate the orientation of the 3-D point cloud. Finally, the performance of the algorithm proposed in this paper has been validated by experiments in comparison with baseline methods. Based on these results, the proposed algorithm significantly reduces the estimation time while maintaining high precision.

scholarly journals Cloth simulation-based construction of pit-free canopy height models from airborne LiDAR data

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Wuming Zhang ◽  
Shangshu Cai ◽  
Xinlian Liang ◽  
Jie Shao ◽  
Ronghai Hu ◽  
...  
Keyword(s):  
Tree Height ◽  
Point Clouds ◽  
Airborne Lidar ◽  
Canopy Height ◽  
Lidar Data ◽  
Cloth Simulation ◽  
Simulation Based ◽  
Maximum Tree Height ◽  
Airborne Lidar Data ◽  
Better Than

Abstract Background The universal occurrence of randomly distributed dark holes (i.e., data pits appearing within the tree crown) in LiDAR-derived canopy height models (CHMs) negatively affects the accuracy of extracted forest inventory parameters. Methods We develop an algorithm based on cloth simulation for constructing a pit-free CHM. Results The proposed algorithm effectively fills data pits of various sizes whilst preserving canopy details. Our pit-free CHMs derived from point clouds at different proportions of data pits are remarkably better than those constructed using other algorithms, as evidenced by the lowest average root mean square error (0.4981 m) between the reference CHMs and the constructed pit-free CHMs. Moreover, our pit-free CHMs show the best performance overall in terms of maximum tree height estimation (average bias = 0.9674 m). Conclusion The proposed algorithm can be adopted when working with different quality LiDAR data and shows high potential in forestry applications.

scholarly journals OICP: An Online Fast Registration Algorithm Based on Rigid Translation Applied to Wire Arc Additive Manufacturing of Mold Repair

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1563
Author(s):  
Ruibing Wu ◽  
Ziping Yu ◽  
Donghong Ding ◽  
Qinghua Lu ◽  
Zengxi Pan ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Point Cloud ◽  
Point Clouds ◽  
Iterative Closest Point ◽  
Multiple Point ◽  
Icp Algorithm ◽  
Registration Algorithm ◽  
Cloud Models ◽  
Comparison Results ◽  
Wire Arc Additive Manufacturing

As promising technology with low requirements and high depositing efficiency, Wire Arc Additive Manufacturing (WAAM) can significantly reduce the repair cost and improve the formation quality of molds. To further improve the accuracy of WAAM in repairing molds, the point cloud model that expresses the spatial distribution and surface characteristics of the mold is proposed. Since the mold has a large size, it is necessary to be scanned multiple times, resulting in multiple point cloud models. The point cloud registration, such as the Iterative Closest Point (ICP) algorithm, then plays the role of merging multiple point cloud models to reconstruct a complete data model. However, using the ICP algorithm to merge large point clouds with a low-overlap area is inefficient, time-consuming, and unsatisfactory. Therefore, this paper provides the improved Offset Iterative Closest Point (OICP) algorithm, which is an online fast registration algorithm suitable for intelligent WAAM mold repair technology. The practicality and reliability of the algorithm are illustrated by the comparison results with the standard ICP algorithm and the three-coordinate measuring instrument in the Experimental Setup Section. The results are that the OICP algorithm is feasible for registrations with low overlap rates. For an overlap rate lower than 60% in our experiments, the traditional ICP algorithm failed, while the Root Mean Square (RMS) error reached 0.1 mm, and the rotation error was within 0.5 degrees, indicating the improvement of the proposed OICP algorithm.

Robust-PCA-based hierarchical plane extraction for application to geometric 3D indoor mapping

2014 ◽  
Vol 41 (2) ◽  
pp. 203-212 ◽  
Author(s):  
Suyong Yeon ◽  
ChangHyun Jun ◽  
Hyunga Choi ◽  
Jaehyeon Kang ◽  
Youngmok Yun ◽  
...  
Keyword(s):  
Principal Component ◽  
Point Clouds ◽  
Previous Method ◽  
Divide And Conquer ◽  
Sensor Data ◽  
Estimation Accuracy ◽  
Content Type ◽  
Extraction Algorithm ◽  
Plane Extraction ◽  
Scan Data

Purpose – The authors aim to propose a novel plane extraction algorithm for geometric 3D indoor mapping with range scan data. Design/methodology/approach – The proposed method utilizes a divide-and-conquer step to efficiently handle huge amounts of point clouds not in a whole group, but in forms of separate sub-groups with similar plane parameters. This method adopts robust principal component analysis to enhance estimation accuracy. Findings – Experimental results verify that the method not only shows enhanced performance in the plane extraction, but also broadens the domain of interest of the plane registration to an information-poor environment (such as simple indoor corridors), while the previous method only adequately works in an information-rich environment (such as a space with many features). Originality/value – The proposed algorithm has three advantages over the current state-of-the-art method in that it is fast, utilizes more inlier sensor data that does not become contaminated by severe sensor noise and extracts more accurate plane parameters.

scholarly journals Comparative Analysis of Different Mobile LiDAR Mapping Systems for Ditch Line Characterization

2021 ◽  
Vol 13 (13) ◽  
pp. 2485
Author(s):  
Yi-Chun Lin ◽  
Raja Manish ◽  
Darcy Bullock ◽  
Ayman Habib
Keyword(s):  
Flow Direction ◽  
Sediment Accumulation ◽  
Digital Terrain Model ◽  
Vertical Direction ◽  
Point Clouds ◽  
Lidar Data ◽  
Cross Sectional ◽  
Premature Failure ◽  
3D Point Clouds ◽  
Mapping Systems

Maintenance of roadside ditches is important to avoid localized flooding and premature failure of pavements. Scheduling effective preventative maintenance requires a reasonably detailed mapping of the ditch profile to identify areas in need of excavation to remove long-term sediment accumulation. This study utilizes high-resolution, high-quality point clouds collected by mobile LiDAR mapping systems (MLMS) for mapping roadside ditches and performing hydrological analyses. The performance of alternative MLMS units, including an unmanned aerial vehicle, an unmanned ground vehicle, a portable backpack system along with its vehicle-mounted version, a medium-grade wheel-based system, and a high-grade wheel-based system, is evaluated. Point clouds from all the MLMS units are in agreement within the ±3 cm range for solid surfaces and ±7 cm range for vegetated areas along the vertical direction. The portable backpack system that could be carried by a surveyor or mounted on a vehicle is found to be the most cost-effective method for mapping roadside ditches, followed by the medium-grade wheel-based system. Furthermore, a framework for ditch line characterization is proposed and tested using datasets acquired by the medium-grade wheel-based and vehicle-mounted portable systems over a state highway. An existing ground-filtering approach—cloth simulation—is modified to handle variations in point density of mobile LiDAR data. Hydrological analyses, including flow direction and flow accumulation, are applied to extract the drainage network from the digital terrain model (DTM). Cross-sectional/longitudinal profiles of the ditch are automatically extracted from the LiDAR data and visualized in 3D point clouds and 2D images. The slope derived from the LiDAR data turned out to be very close to the highway cross slope design standards of 2% on driving lanes, 4% on shoulders, and a 6-by-1 slope for ditch lines.

scholarly journals A Coarse-to-Fine Method for Estimating the Axis Pose Based on 3D Point Clouds in Robotic Cylindrical Shaft-in-Hole Assembly

Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4064
Author(s):  
Can Li ◽  
Ping Chen ◽  
Xin Xu ◽  
Xinyu Wang ◽  
Aijun Yin
Keyword(s):  
Pose Estimation ◽  
Point Clouds ◽  
Geometric Constraints ◽  
Admittance Control ◽  
3D Vision ◽  
Axis Orientation ◽  
3D Point Clouds ◽  
Object Pose Estimation ◽  
Traditional Approaches ◽  
Coarse To Fine

In this work, we propose a novel coarse-to-fine method for object pose estimation coupled with admittance control to promote robotic shaft-in-hole assembly. Considering that traditional approaches to locate the hole by force sensing are time-consuming, we employ 3D vision to estimate the axis pose of the hole. Thus, robots can locate the target hole in both position and orientation and enable the shaft to move into the hole along the axis orientation. In our method, first, the raw point cloud of a hole is processed to acquire the keypoints. Then, a coarse axis is extracted according to the geometric constraints between the surface normals and axis. Lastly, axis refinement is performed on the coarse axis to achieve higher precision. Practical experiments verified the effectiveness of the axis pose estimation. The assembly strategy composed of axis pose estimation and admittance control was effectively applied to the robotic shaft-in-hole assembly.

scholarly journals Principal Component Analysis For ICP Pose Estimation Of Space Structures

2021 ◽  
Author(s):  
Lun H. Mark
Keyword(s):  
Pose Estimation ◽  
Point Cloud ◽  
Principal Component ◽  
Point Clouds ◽  
Optimal Combination ◽  
Estimation Accuracy ◽  
Space Structures ◽  
Complex Objects ◽  
Error Norm ◽  
Simulation Results

This thesis investigates how geometry of complex objects is related to LIDAR scanning with the Iterative Closest Point (ICP) pose estimation and provides statistical means to assess the pose accuracy. LIDAR scanners have become essential parts of space vision systems for autonomous docking and rendezvous. Principal Componenet Analysis based geometric constraint indices have been found to be strongly related to the pose error norm and the error of each individual degree of freedom. This leads to the development of several strategies for identifying the best view of an object and the optimal combination of localized scanned areas of the object's surface to achieve accurate pose estimation. Also investigated is the possible relation between the ICP pose estimation accuracy and the districution or allocation of the point cloud. The simulation results were validated using point clouds generated by scanning models of Quicksat and a cuboctahedron using Neptec's TriDAR scanner.

Sign in / Sign up

Export Citation Format

Share Document