scholarly journals Temporal variation in seed quality of Indian spinach preserved in different containers

2016 ◽  
Vol 5 (2) ◽  
pp. 51-57 ◽  
Author(s):  
M Kamruzzaman ◽  
S Khatun ◽  
A Rakib ◽  
MI Hoque ◽  
MH Rani
Keyword(s):  
Moisture Content ◽  
Seed Quality ◽  
Initial Moisture Content ◽  
Dry Weight ◽  
Germination Percentage ◽  
Seedling Vigor ◽  
Fresh Weight ◽  
Seed Technology ◽  
Vigor Index

The experiment was conducted to investigate the seed quality of Indian spinach for three months stored at different containers (Plastic pot, polythene bag and cloth bag) during 2013-2014 at Seed Technology Laboratory of Bangabandhu Sheikh Mujibur Rahman Agricultural University (BSMRAU), Gazipur. The initial moisture content of the seed was 9.89% with 75.00% germination. However, after two months, the seed had a different range of increased moisture content with reduced germination percentage depending upon the packing materials. Among the three containers, seeds stored at cloth bag absorbed more moisture (14.36%) from surrounding atmosphere followed by the moisture content, 12.67% and 11.50% of polythene bag and airtight plastic pot, respectively. Seeds stored at plastic pot, polythene bag and cloth bag exhibited 65.00, 64.00 and 50.00 per cent germination, respectively. Similarly, the fresh weight and dry weight of seedling and seedling vigor were also decreased. The seeds of plastic pot were good in term of germination capacity, fresh and dry weight and vigor index in comparison to those stored at cloth bag and polythene bag.Int. J. Agril. Res. Innov. & Tech. 5 (2): 51-57, December, 2015

scholarly journals Impact of seed size on seeds viability, vigor and storability of Hordeum vulgare (L.)

2018 ◽  
Author(s):  
M. Massimi
Keyword(s):  
Seed Germination ◽  
Seed Size ◽  
Seed Quality ◽  
Accelerated Aging ◽  
Dry Weight ◽  
Germination Percentage ◽  
Seedling Vigor ◽  
Hordeum Vulgare L ◽  
Vigor Index ◽  
The Impact

Seed size may influence seed germination, and seedling vigor. Few investigations are available about the effect of seed size on barley seedling vigor in Jordan. The present study was designed to investigate the impact of seed size on germination percentage, seedling dry weight, seedling vigor index, and germination percentage after accelerated aging in barley. Three seed sizes i.e. large, medium, and small (having diameter of > 2.75 millimeter, 2.5 - 2.75 millimeter, and less than 2.5 millimeter, respectively) were tested in the experiment. Seed quality for different seed size categories was evaluated in the laboratory by measuring seed germination, germination after accelerated aging, as well seedling dry weight and vigor index. Results showed significant differences for large seeds in germination percentages, seedling dry weight and vigor index. It may be concluded that large seed size of barley showed best quality.

scholarly journals The Effect of Stage of Harvest and Storage on the Seed Quality of Chickpea (Cicer arietinum L.)

1970 ◽  
Vol 44 (3) ◽  
pp. 303-310
Author(s):  
A Khatun ◽  
MAH Bhuiyan ◽  
MM Ud-deen
Keyword(s):  
Moisture Content ◽  
Root Length ◽  
Laboratory Experiments ◽  
Seed Quality ◽  
Dry Weight ◽  
Germination Percentage ◽  
Shoot Length ◽  
Harvesting Stage ◽  
And Storage

Laboratory experiments were carried out to determine the effects of harvesting stages on the seed quality of chickpea. Chickpea seed of three varieties (BARI Chola-5, BARI Chola-6 and BARI Chola-8) were collected at three harvestings times i.e. from three different times at 7 days interval prior to harvesting, viz. i) when the pods were yellowish with a few yellow greens (H1 stage), ii) when most of the pods were light brown with a few yellow (H2 stage), and iii) when all the pods were completely brown and dry (H3 stage). Significant variation was observed in three varieties of chickpea for all the parameters studied except vigour-I. The highest germination percentage, root length, shoot length, root plus shoot length and vigour-II was observed in BARI Chola-5 which was significantly higher over BARI Chola-8. Dry weight was found to be significantly higher in BARI Chola-8 which was identical to BARI Chola-6. Moisture content was significantly higher in BARI Chola-8. Seed collected at the stage when most of the pods were light brown with a few yellow (H2 stage) recorded the highest germination percentage, dry weight, vigour-I and root length. Pods (H1 stage) gave the highest moisture content in seeds. BARI Chola-5 seeds recorded the highest germination at H2 stage. Interaction effects of varieties and harvesting stage had non-significant effect on germination percentage, vigour-I, shoot length and vigour-II in both the years. Keywords: Chickpea, Harvesting stage, Storage, Vigour, Moisture, Germination DOI: 10.3329/bjsir.v44i3.4403 Bangladesh J. Sci. Ind. Res. 44(3),303-310, 2009  

scholarly journals Evaluation of Seed Quality of Chickpea (Cicer arietinum L.) Collected from Different Branches

1970 ◽  
Vol 46 (4) ◽  
pp. 507-512
Author(s):  
A Khatun ◽  
MAH Bhuiyan
Keyword(s):  
Seed Quality ◽  
Agricultural Research ◽  
Dry Weight ◽  
Germination Percentage ◽  
Agricultural Research Institute ◽  
Seed Vigour ◽  
Seed Technology ◽  
Moisture Percentage ◽  
Mature Seeds

Mature seeds of three chickpea varieties like BARI Chhola-5, 6 and 8 were collected from three different branches like primary, secondary and tertiary, and were evaluated for quality in the Seed Technology Laboratory, Bangladesh Agricultural Research Institute, Gazipur, Bangladesh during August to September of 2004 and 2005. All the seeds were stored in earthen pot for five months before conducting the laboratory study. Significant variation was observed in all three varieties of chickpea for all the parameters studied except seed vigour. The highest moisture percentage (10.17 in 2004 and 10.18 in 2005), dry weight (0.50 g in 2004 and 0.51 g in 2005) and seed vigour (39.7 in 2004 and 41.6 in 2005) was observed in BARI Chhola-8 and the lowest in BARI Chhola-5. Germination percentage was significantly higher in BARI Chhola-5 (87.6 in 2004 and 88.9 in 2005). Seeds of different branches did not vary significantly for most of the parameters. However, seeds of primary or secondary branches had higher moisture and germination percentage, dry weight of seedling and seed vigour. Interaction effects of varieties and seeds of different branch had no definite trend though non-significant effect was observed in most of the parameters. Keywords: Chickpea; Seed of different branches; Vigour; Moisture; Germination DOI: http://dx.doi.org/10.3329/bjsir.v46i4.9599 BJSIR 2011; 46(4): 507-512

scholarly journals Retaining the Benefits of Matriconditioning by Controlled Drying of Snap Bean Seeds

HortScience ◽  
1993 ◽  
Vol 28 (10) ◽  
pp. 1027-1030 ◽  
Author(s):  
Wlodzimierz Ptasznik ◽  
Anwar A. Khan
Keyword(s):  
Moisture Content ◽  
Seed Quality ◽  
Initial Moisture Content ◽  
Dry Weight ◽  
Exponential Model ◽  
Leakage Rate ◽  
Fresh Weight ◽  
Snap Bean ◽  
Shoot Fresh Weight ◽  
Growth Chamber Studies

The effects of various drying conditions on seed quality and performance of matriconditioned `Bush Blue Lake 47' snap bean (Phaseolus vulgaris L.) seeds were studied. An exponential model based on the Page equation provided a good fit (R2 = 0.9) to changes in moisture content during drying. Drying matriconditioned seeds with high initial moisture content (47.2%) for 5 to 6 hours at 35C, 30% to 35% relative humidity, and 0.7 to 1.4 m·s-1 air velocity (v) retained, and in some cases augmented, the benefits derived from conditioning. Matriconditioning greatly reduced electrolyte leakage (34.3 vs. 94.7 μS·cm-1·g-1 for nontreated seeds); drying to 15% moisture content at 0.7 or 1.4 m·s-1 v moderately increased the leakage rate (59.1 to 60.9 vs. 34.3 μS·cm-1·g-1), while drying at 0.02 m·s-1 v (ambient) increased the rate to that of nontreated seeds. The leakage rate remained low (43.6 to 50.8 μS·cm-1·g-1) in matriconditioned seeds dried to 22% moisture content at all air velocities. In growth-chamber studies, rapidly drying matriconditioned seeds to 15% moisture content at 1.4 m·s-1 v improved the emergence percentage over that of nontreated seeds, increased the shoot fresh and dry weight over that of nontreated and nondried matriconditioned seeds, and increased the shoot fresh weight over that of seeds dried at 0.02 or 0.7 m·s-1 v. Drying matriconditioned seeds to 15% moisture content at 0.7 m·s-1 v improved plant fresh weight over that produced by nontreated seeds. Rapid drying to 22% moisture content at 1.4 or 0.7 m·s-1 v improved only shoot fresh weight over that of nontreated seeds. In a 1992 field planting, percent emergence of matriconditioned seeds dried at 0.7 or 1.4 m·s-1 v was similar to that of nondried matriconditioned seeds and higher than that of nontreated seeds. No significant differences were noted in plant yield among the treatments.

scholarly journals Efeect of Sulphur, Bradyrhizobium Inoculation, Initial Moisture Content of Seed and Storage Container on the Germination Percentage of Groundnut Seed

1970 ◽  
Vol 42 (2) ◽  
pp. 175-186
Author(s):  
M Ataur Rahman
Keyword(s):  
Moisture Content ◽  
Seed Quality ◽  
Initial Moisture Content ◽  
Germination Percentage ◽  
Vital Role ◽  
Storage Container ◽  
Storage Performance ◽  
Standard Level ◽  
And Storage

The study was aimed at determining the effect of sulphur and Bradyrhizobium fertilized seed at different initial moisture content of seed and storage container, to improving the germination percentage of groundnut seed. The germination test was carried out after storing the seed for five months. Results revealed that seeds obtained from 60kg S/ha. stored in polythene bags retained the germination percentage up to the standard level of ISTA for 5 months efficiently. Least initial moisture content of seed (7.25 %) produced from the above doses of fertilizer elements also played a vital role in keeping the quality of stored seed. Results in the respect of storage performance in terms of percentage of germination indicated that groundnut seed obtained from sulphur and Bradyrhizobium fertilizer elements during production and stored in polythene bag can retain better seed quality, provided seed were dried to a safe moisture level of 7.25 % to 8.46 %. Bangladesh J. Sci. Ind. Res. 42(2), 175-186, 2007

scholarly journals Effect of fungicides on seed quality of lentil (Lens culinaris L.) during storage

2017 ◽  
Vol 5 (2) ◽  
pp. 51-56
Author(s):  
A Khatun ◽  
MAH Bhuiyan ◽  
A Tahmid
Keyword(s):  
Moisture Content ◽  
Seed Quality ◽  
Germination Rate ◽  
Storage Period ◽  
Dry Weight ◽  
Storage Condition ◽  
Germination Percentage ◽  
Vigour Index ◽  
Initial Seed

Laboratory tests were carried out to study the effect of different fungicides i.e. Bavistin DF, Vitavax and Genuine 50WP on the seed quality of lentil during storage condition. After processing and drying, seeds were preserved separately with three fungicides at the rate of 2.5g kg-1 of seeds and stored in earthen pots till next planting time. The seed quality i.e. moisture content (%), germination rate (%), dry weight (g) of seedlings and vigour index were measured at the end of storage period. The average germination percentage of the initial seed lot was 90% and moisture content was 9%. Among the three fungicides, Bavistin DF showed higher values for germination percentage (91.3% in 2004 and 92.7% in 2005), dry weight (0.70 g in 2004 and 0.67 g in 2005) and vigour (63.8 in 2004 and 62.1 in 2005).Jahangirnagar University J. Biol. Sci. 5(2): 51-56, 2016 (December)

scholarly journals Effect of harvesting stages on the seed quality of lentil (Lens culinaris L.) during storage

1970 ◽  
Vol 34 (4) ◽  
pp. 565-576 ◽  
Author(s):  
A Khatun ◽  
G Kabir ◽  
MAH Bhuiyan
Keyword(s):  
Root Length ◽  
Seed Quality ◽  
Dry Weight ◽  
Germination Percentage ◽  
Shoot Length ◽  
Seed Technology ◽  
Seedling Length ◽  
Vigour Index ◽  
Harvesting Stage

Laboratory experiments were carried out during August to September 2004 and 2005 at the Seed Technology Laboratory, Bangladesh Agricultural Research Institute, Gazipur, Bangladesh to determine the effects of harvesting stages on the seed quality of lentil. Lentil seeds of three varieties were harvested at three stages at 7-day intervals viz. i) when the pods were yellowish with a few yellow greens (H1 stage), ii) when most of the pods were light brown with a few yellow (H2 stage), and iii) when all the pods were completely brown and dry (H3 stage). All the seeds were stored in earthen pot until conducting the laboratory study. Non-significant variation was observed in three varieties of lentil for most of the parameters studied. The highest germination percentage, root length, shoot length, seedling length and vigour index (vigour index-I and vigour index-Il) were observed in BARI Masur-4, and the lowest in BARI Masur-2. Harvesting stage had significant effect on some parameters studied. Seeds collected at the stage when most of the pods were light brown with a few yellow (H2 stage) recorded the highest germination percentage, dry weight, root length, shoot length, seedling length and vigour index (vigour index-I and vigour-Il) in both the years. BARI Masur-4 seeds collected at H2 stage recorded the highest dry weight and vigour index-I in both the years and vigour index-Il in 2004. Key Words: Lentil; harvesting stage; storage; seed quality. DOI: 10.3329/bjar.v34i4.5833Bangladesh J. Agril. Res. 34(4) : 565-576, December 2009

scholarly journals Seed Harvesting at Different Maturity Stages of Siliqua on Seed Quality of Rapeseed-Mustard Varieties

2020 ◽  
Vol 22 (1) ◽  
pp. 121-130
Author(s):  
AHMMR Talukder ◽  
M Biswas ◽  
MNH Miah ◽  
MA Kashem ◽  
L Nahar
Keyword(s):  
Seed Quality ◽  
Germination Percentage ◽  
Maturity Stage ◽  
Pale Yellow ◽  
Maturity Stages ◽  
Vigor Index ◽  
Root And Shoot Length ◽  
Golden Yellow ◽  
Full Maturity

A laboratory experiment with three replicates was conducted at Plant Physiology Division research laboratory of Bangladesh Agricultural Research Institute (BARI) during November, 2015 to observe the seed quality of rapeseed-mustard by harvesting at different maturity stages of siliqua. Seeds were collected from siliqua of different rapeseed-mustard varieties and harvesting was made at different maturity stages based on their external color i.e., Green, pale yellow, Golden yellow and full maturity stage of siliqua. After harvesting of siliqua as per external color seeds were dried naturally about 48 hours and were packed in polythene and stored at laboratory environment for next season uses. Under laboratory condition seeds were evaluated in terms of moisture and germination percentage, speed of germination, root and shoot length, vigor index etc. Moisture content was found significantly at elevated level in respect of mustard varieties of BARI Sarisha-14 (V2), BARI Sarisha-6 (V3) and Tori-7 (V4).  The variety Tori-7 and BARI Sarisha-14 showed  the highest vigor index-II & vigor index-I, respectively. Among the harvesting stages, most of the parameters showed the highest standards in seeds harvesting at full maturity of siliqua stage (H4) followed by the golden yellow siliqua stage (H3) and pale yellow siliqua stages seeds (H2).Irrespective of rapeseed-mustard varieties seed collected from golden yellow and pale yellow siliqua stages could  be stored up to twelve month for next season without significant loss in terms of germination percentage and vigor followed by full maturity stages of siliqua harvested seeds (H4). Bangladesh Agron. J. 2019, 22(1): 121-130

scholarly journals Salinity Tolerance of Mungbean Genotypes at Seedling Stage

2018 ◽  
Vol 10 (2) ◽  
pp. 409-416
Author(s):  
Ratri Tri Hapsari ◽  
Trustinah Trustinah
Keyword(s):  
Germination Rate ◽  
Lateral Roots ◽  
Block Design ◽  
Dry Weight ◽  
Germination Percentage ◽  
Seedling Stage ◽  
Fresh Weight ◽  
Vigor Index ◽  
Normal Seedling ◽  
Two Factors

Salinity is a major abiotic stress limiting mungbean production worldwide including Indonesia. Since mungbean plant is very sensitive to salt condition, selection of salinity tolerant genotypes becomes important for mungbean improvement. The objective of this study was to evaluate the tolerance of eight mungbean genotypes to salinity at seedling stage under different levels. The experiment was arranged in a randomized complete block design with two factors (mungbean genotypes and salinity levels) and triplicates. Observation variables were germination percentage, vigor index, germination rate, hypocotyls length, epicotyls length, root length, number of root, seedling fresh weight, and seedling dry weight. The result showed that increasing level of salinity concentration inhibited the speed of germination, germination percentage, vigor index, normal seedling fresh weight, and number of lateral roots. Murai and Vima 1 were identified as tolerant genotypes, while Vima-2 and MLGV 0180 were identified as salinity sensitive genotypes at seedling stage. Currently, mungbean varieties with special characters, such as saline-tolerant is not yet available. The availability of saline-tolerant variety of mungbean is a cheaper and easier technology for farmers to anticipate the expansion of the saline area. The tolerant genotypes may be further tested at the later stage to obtain promising genotype tolerant to salinity that effectively assist mungbean breeding program.

scholarly journals Effect of nitrogen and plant growth regulators on seed yield per plant and seed quality parameters in brinjal (Solanum melongena L.)

2017 ◽  
Vol 9 (4) ◽  
pp. 2338-2343
Author(s):  
Arpana D. Vaja ◽  
J. B. Patel ◽  
R.N. Daki ◽  
Shital A. Chauhan
Keyword(s):  
Seed Yield ◽  
Root Length ◽  
Seed Quality ◽  
Dry Weight ◽  
Germination Percentage ◽  
Quality Parameters ◽  
Shoot Length ◽  
Fresh Weight ◽  
Shoot Dry Weight ◽  
Vigour Index

The present investigation on effect of nitrogen [N0 (Control), N1 (50 kg N/ha), N2 (100 kg N/ha), and N3 (150 kg N/ ha)] and plant growth regulators [G0 (Control), G1 (50 ppm GA3), G2 (50 ppm NAA) and G3 (500 ppm Cycocel)] on seed yield per plant and seed quality parameters in brinjal (Solanum melongena L.) cv. GJB 3 was carried out at the Instructional Farm, Department of Agronomy, Junagadh Agricultural University, Junagadh during kharif 2015-16. The experiment was laid out in field as per randomized block design (Factorial) with three replications. The seed harvested from 16 different treatments combinations replicated thrice from the field were analyzed in the laboratory following completely randomized design (factorial) for various seed quality parameters. Application of nitrogen @ 150 kg N/ha recorded significantly (P<0.05) highest seed yield per plant, shoot fresh weight, root dry weight, shoot dry weight and vigour index – 2 (mass), while application of 100 kg N/ha resulted in significantly (P<0.05) highest germination percentage, root length, shoot length, root fresh weight and vigour index – 1 (length). Application of GA3 at 50 ppm recorded significantly the highest seed yield per plant, germination percentage, root length, shoot length, root fresh weight, shoot fresh weight, root dry weight, shoot dry weight, vigour index – 1 (length) and vigour index – 2 (mass). Among the 16 different treatment combinations, nitrogen @ 150 kg/ha and GA3 50 ppm noted the maximum seed yield per plant, shoot dry weight and vigour index – 2 (mass), while significantly the maxi-mum germination percentage, root length, shoot length, root fresh weight, shoot fresh weight and vigour index – 1 (length) were registered in treatment combination nitrogen 100 kg N/ha and GA3 @ 50 ppm. Therefore, it is advised that application of 100-150 kg of N/ha as a nitrogenous fertilizer and spray GA3 @ 50 ppm (G1) at 45 days after transplanting helps in increasing the seed yield per plant and seed quality parameters in brinjal seed production.

Sign in / Sign up

Export Citation Format

Share Document