scholarly journals In vitro Transdermal Delivery of Metformin from a HPMC/ PVA Based TDS-patch at Different pH

2011 ◽  
Vol 3 (3) ◽  
pp. 651-657 ◽  
Author(s):  
L. Jahan ◽  
R. Ferdaus ◽  
S. M. Shaheen ◽  
M. Z. Sultan ◽  
M. A. Mazid
Keyword(s):  
Drug Delivery ◽  
Controlled Release ◽  
Sustained Release ◽  
Release Rate ◽  
Transdermal Delivery ◽  
Transdermal Drug Delivery ◽  
Neutral Ph ◽  
Skin Ph ◽  
Diffusion Controlled

In order to evaluate the pHs effect on the transdermal drug delivery, HPMC/PVA based TDS-patch was prepared. In vitro transdermal dissolution was performed at 32 oC at different pHs.  Comparatively higher release rate was found in case of pH 7.4 than those of others. pHs 5.4 and 8 showed almost the same release pattern. The release fashion was Higuchi type of diffusion controlled release. This result showed that neutral pH would accumulate the maximum drug from such a TDS patch, where the skin pH (around 5.4)  does not support such a release. Sustained release of drug from such a patch prefers skin pH rather than neutral pH.Keywords: Transdermal drug delivery; Higuchi diffusion; Release rate; Metformin.© 2011 JSR Publications. ISSN: 2070-0237 (Print); 2070-0245 (Online). All rights reserved.doi:10.3329/jsr.v3i3.7422               J. Sci. Res. 3 (3), 661-667 (2011)

Formulation Development and Characterization of controlled release core in cup matrix tablets of venlafaxine HCl

2020 ◽  
Vol 15 ◽  
Author(s):  
Balaji Maddiboyina ◽  
Vikas Jhawat ◽  
Gandhi Sivaraman ◽  
Om Prakash Sunnapu ◽  
Ramya Krishna Nakkala ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Release Rate ◽  
Zero Order ◽  
Water Soluble ◽  
Matrix Tablets ◽  
Drug Dissolution ◽  
Crystalline Cellulose ◽  
Hydrophobic Polymers

Background: Venlafaxine HCl is a selective serotonin reuptake inhibitor which is given in the treatment of depression. The delivery of the drug at a controlled rate can be of great importance for prolonged effect. Objective: The objective was to prepare and optimize the controlled release core in cup matrix tablet of venlafaxine HCl using the combination of hydrophilic and hydrophobic polymers to prolong the effect with rate controlled drug release. Methods: The controlled release core in cup matrix tablets of venlafaxine HCl were prepared using HPMC K5, K4, K15, HCO, IPA, aerosol, magnesium sterate, hydrogenated castor oil and micro crystalline cellulose PVOK-900 using wet granulation technique. Total ten formulations with varying concentrations of polymers were prepared and evaluated for different physicochemical parameters such FTIR analysis for drug identification, In-vitro drug dissolution study was performed to evaluate the amount of drug release in 24 hrs, drug release kinetics study was performed to fit the data in zero order, first order, Hixson–crowell and Higuchi equation to determine the mechanism of drug release and stability studies for 3 months as observed. Results: The results of hardness, thickness, weight variation, friability and drug content study were in acceptable range for all formulations. Based on the In vitro dissolution profile, formulation F-9 was considered to be the optimized extending the release of 98.32% of drug up to 24 hrs. The data fitting study showed that the optimized formulation followed the zero order release rate kinetics and also compared with innovator product (flavix XR) showed better drug release profile. Conclusion: The core-in-cup technology has a potential to control the release rate of freely water soluble drugs for single administration per day by optimization with combined use of hydrophilic and hydrophobic polymers.

scholarly journals Development and In Vitro-In Vivo Evaluation of a Novel Sustained-Release Loxoprofen Pellet with Double Coating Layer

Pharmaceutics ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 260 ◽  
Author(s):  
Dongwei Wan ◽  
Min Zhao ◽  
Jingjing Zhang ◽  
Libiao Luan
Keyword(s):  
Citric Acid ◽  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Diffusion Rate ◽  
Immediate Release ◽  
Pharmacokinetic Studies ◽  
Release Tablet

This study aimed to develop a novel sustained release pellet of loxoprofen sodium (LXP) by coating a dissolution-rate controlling sub-layer containing hydroxypropyl methyl cellulose (HPMC) and citric acid, and a second diffusion-rate controlling layer containing aqueous dispersion of ethyl cellulose (ADEC) on the surface of a LXP conventional pellet, and to compare its performance in vivo with an immediate release tablet (Loxinon®). A three-level, three-factor Box-Behnken design and the response surface model (RSM) were used to investigate and optimize the effects of the citric acid content in the sub-layer, the sub-layer coating level, and the outer ADEC coating level on the in vitro release profiles of LXP sustained release pellets. The pharmacokinetic studies of the optimal sustained release pellets were performed in fasted beagle dogs using an immediate release tablet as a reference. The results illustrated that both the citric acid (CA) and ADEC as the dissolution- and diffusion-rate controlling materials significantly decreased the drug release rate. The optimal formulation showed a pH-independent drug release in media at pH above 4.5 and a slightly slow release in acid medium. The pharmacokinetic studies revealed that a more stable and prolonged plasma drug concentration profile of the optimal pellets was achieved, with a relative bioavaibility of 87.16% compared with the conventional tablets. This article provided a novel concept of two-step control of the release rate of LXP, which showed a sustained release both in vitro and in vivo.

Preparation, evaluation, and in vitro release of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules

2020 ◽  
pp. 1-9
Author(s):  
Yunhong Wang ◽  
Rong Hu ◽  
Yanlei Guo ◽  
Weihan Qin ◽  
Xiaomei Zhang ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Release Rate ◽  
Orthogonal Design ◽  
Drug Loading ◽  
In Vitro Release ◽  
Core Material ◽  
Evaluation Indexes ◽  
Vitro Release

OBJECTIVE: In this study we explore the method to prepare tanshinone self-microemulsifying sustained-release microcapsules using tanshinone self-microemulsion as the core material, and chitosan and alginate as capsule materials. METHODS: The optimal preparation technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules was determined by using the orthogonal design experiment and single-factor analysis. The drug loading and entrapment rate were used as evaluation indexes to assess the quality of the drug, and the in vitro release rate was used to evaluate the drug release performance. RESULTS: The best technology of chitosan-alginate tanshinone self-microemulsifying sustained-release microcapsules is as follows: the concentration of alginate is 1.5%, the ratio of tanshinone self-microemulsion volume to alginate volume to chitosan mass is 1:1:0.5 (ml: ml: g), and the best concentration of calcium chloride is 2.0%. To prepare the microcapsules using this technology, the drug loading will be 0.046%, the entrapment rate will be 80.23%, and the 24-hour in vitro cumulative release rate will be 97.4%. CONCLUSION: The release of the microcapsules conforms to the Higuchi equation and the first-order drug release model and has a good sustained-release performance.

scholarly journals Enhancement strategies for transdermal drug delivery systems: current trends and applications

2021 ◽  
Author(s):  
Delly Ramadon ◽  
Maeliosa T. C. McCrudden ◽  
Aaron J. Courtenay ◽  
Ryan F. Donnelly
Keyword(s):  
Drug Delivery ◽  
Stratum Corneum ◽  
Transdermal Delivery ◽  
Transdermal Drug Delivery ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Global Market ◽  
Therapeutic Drug ◽  
Current Trends ◽  
Transdermal Drug Delivery Systems

AbstractTransdermal drug delivery systems have become an intriguing research topic in pharmaceutical technology area and one of the most frequently developed pharmaceutical products in global market. The use of these systems can overcome associated drawbacks of other delivery routes, such as oral and parenteral. The authors will review current trends, and future applications of transdermal technologies, with specific focus on providing a comprehensive understanding of transdermal drug delivery systems and enhancement strategies. This article will initially discuss each transdermal enhancement method used in the development of first-generation transdermal products. These methods include drug/vehicle interactions, vesicles and particles, stratum corneum modification, energy-driven methods and stratum corneum bypassing techniques. Through suitable design and implementation of active stratum corneum bypassing methods, notably microneedle technology, transdermal delivery systems have been shown to deliver both low and high molecular weight drugs. Microneedle technology platforms have proven themselves to be more versatile than other transdermal systems with opportunities for intradermal delivery of drugs/biotherapeutics and therapeutic drug monitoring. These have shown that microneedles have been a prospective strategy for improving transdermal delivery systems. Graphical abstract

scholarly journals FORMULATION AND EVALUATION OF PERINDOPRIL MICROENCAPSULES BY USING DIFFERENT POLYMER

2017 ◽  
Vol 10 (2) ◽  
pp. 153
Author(s):  
Leena Jacob ◽  
Abhilash Tv ◽  
Shajan Abraham
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Release Rate ◽  
Oral Drug Delivery ◽  
Entrapment Efficiency ◽  
Water Soluble ◽  
Oral Drug ◽  
Percentage Yield ◽  
Drug Entrapment Efficiency

Objective: The study was carried out with an objective to achieve a potential sustained release oral drug delivery system of an antihypertensive drug, Perindopril which is a ACE inhibitor having half life of 2 hours. Perindopril is water soluble drug, so we can control or delay the release rate of drug by using release retarding polymers. This may also decrease the toxic side effects by preventing the high initial concentration in the blood.Method: Microcapsules were prepared by solvent evaporation technique using Eudragit L100 and Ethyl cellulose as a retarding agent to control the release rate and magnesium stearate as an inert dispersing carrier to decrease the interfacial tension between lipophilic and hydrophilic phase. Results: Prepared microcapsules were evaluated for the particle size, percentage yield, drug entrapment efficiency, flow property and in vitro drug release for 12 h. Results indicated that the percentage yield, mean particle size, drug entrapment efficiency and the micrometric properties of the microcapsules was influenced by various drug: polymer ratio. The release rate of microcapsules could be controlled as desired by adjusting the combination ratio of dispersing agents to retarding agents.Conclusion:Perindopril microcapsules can be successfully designed to develop sustained drug delivery, that reduces the dosing frequency and their by one can increase the patient compliance.

scholarly journals The Use of Sonophoresis in the Administration of Drugs Throughout the Skin

2009 ◽  
Vol 12 (1) ◽  
pp. 88 ◽  
Author(s):  
Jose Juan Escobar-Chavez ◽  
Dalia Bonilla-Martínez ◽  
Martha Angélica Villegas-González ◽  
Isabel Marlen Rodríguez-Cruz ◽  
Clara Luisa Domínguez-Delgado
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Oral Administration ◽  
Transdermal Delivery ◽  
Transdermal Drug Delivery ◽  
Drug Delivery Systems ◽  
Medical Diagnostics ◽  
Attractive Alternative ◽  
Delivery Methods ◽  
Conventional Drug

Abstract Transdermal drug delivery offers an attractive alternative to the conventional drug delivery methods of oral administration and injection. However, the stratum corneum acts as a barrier that limits the penetration of substances through the skin. Application of ultrasound to the skin increases its permeability (sonophoresis) and enables the delivery of various substances into and through the skin. Ultrasound has been used extensively for medical diagnostics and to a certain extent in medical therapy (physiotherapy, ultrasonic surgery, hyperthermia). Nevertheless, it has only recently become popular as a technique to enhance drug release from drug delivery systems. A number of studies suggest the use of ultrasound as an external mean of delivering drugs at increased rates and at desired times. This review presents the main findings in the field of sonophoresis, namely transdermal drug delivery and transdermal monitoring. Particular attention is paid to proposed enhancement mechanisms and trends in the field of topical and transdermal delivery.

scholarly journals CHEMICAL MODIFICATION, CHARACTERIZATION AND EVALUATION OF MUCOADHESIVE POTENTIALITY OF ASSAM BORA RICE STARCH

2017 ◽  
Vol 9 (9) ◽  
pp. 132 ◽  
Author(s):  
Abdul Baquee Ahmed ◽  
Iman Bhaduri
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Sustained Release ◽  
Chemical Modification ◽  
Ex Vivo ◽  
Rice Starch ◽  
Modified Starch ◽  
Native Starch ◽  
Ft Ir

Objective: The objective of the present study was to chemical modification, characterization and evaluation of mucoadhesive potentiality of Assam bora rice starch as potential excipients in the sustained release drug delivery system. Methods: The starch was isolated from Assam bora rice and esterified using thioglycolic acid and characterized by Fourier transform infrared spectroscopy (FT-IR), Differential scanning calorimetry (DSC) and Nuclear magnetic resonance (NMR). The 10% w/v gel formulation based on modified bora rice starch loaded with irinotecan (0.6%) was prepared and evaluated for various rheological properties, ex-vivo mucoadhesion using goat intestine and in vitro drug release study in phosphate buffer pH 6.8.Results: The chemical modification was confirmed by FT-IR and NMR studies with the presence of the peak at 2626.74 cm-1 and a singlet at 2.51 respectively due to–SH group. Ex-vivo mucoadhesion studies showed 6.6 fold increases in mucoadhesion of the modified starch with compared to native starch (46.3±6.79g for native starch; 308.7±95.31g for modified starch). In vitro study showed 89.12±0.84 % of drug release after 6 h in phosphate buffer pH 6.8 and the release kinetics followed Non-Fickian diffusion.Conclusion: The modified Assam bora rice starch enhanced a mucoadhesive property of the native starch and thus, can be explored in future as a potential excipient for the sustained release mucoadhesive drug delivery system.

Sign in / Sign up

Export Citation Format

Share Document