scholarly journals Influence of mulching and plant spacing on growth and yield of french bean (Phaseolus vulgaris L.)

2015 ◽  
Vol 26 (2) ◽  
pp. 129-135
Author(s):  
MS Sahariar ◽  
MR Karim ◽  
MA Nahar ◽  
M Rahman ◽  
MU Islam
Keyword(s):  
Yield Components ◽  
Water Hyacinth ◽  
Block Design ◽  
Maximum Yield ◽  
French Bean ◽  
Growth And Yield ◽  
Plant Spacing ◽  
Phaseolus Vulgaris L ◽  
Treatment Combination ◽  
Randomized Complete Block Design

A field experiment was conducted at the Horticulture Farm of the Department of Horticulture, Bangladesh Agricultural University, Mymensingh to investigatethe effect of mulching and plant spacing on the growth and yield of French bean during the period from November 2014 to January 2015. The experiment consisted of three types of mulchingnamely (i) control (without mulch), (ii) water hyacinth and (iii) black ploythene much and three levels of spacing viz., (i) 30 cm x 25 cm (ii) 30 cm x 20 cm and (iii) 30 cm x 15 cm. The experiment was laid out in randomized complete block design with three replications. Results showed that both mulching and plant spacing significantly influenced the growth and yield components of French bean. Black polythene mulch produced the highest yield (5.82 t/ha) and the lowest yield (4.92 t/ha) was recorded fromno mulch treatment. The maximum yield (6.22 t/ha) was obtained from 30 cm x 15 cm plant spacing and the lowest (4.58 t/ha) was obtained with 30 cm x 25 cm plant spacing. The combined effects of mulching and plant spacing were statistically significant. The combination of black polythene mulch with 30 cm x 15 cm spacing gave the highest yield (6.97 t/ha) and the lowest yield (3.94 t/ha) was received from without mulching at spacing of 30 cm x 25 cm treatment combination. Considering the above findings the black polythene mulch with 30 x 15 cm plant spacing  may be recommendfor French bean cultivation.Progressive Agriculture 26 (2): 129-135, 2015

scholarly journals Effect of Vermicompost and Earthing Up on the Growth and Yield of Onion

2019 ◽  
pp. 1-12
Author(s):  
Shirajum Monira ◽  
Tahmina Mostarin ◽  
Khaleda Khatun ◽  
Md. Ehsanul Haq ◽  
Ismita Akter Soniya ◽  
...  
Keyword(s):  
Block Design ◽  
Maximum Yield ◽  
Field Research ◽  
Growth And Yield ◽  
Control Treatment ◽  
Fresh Weight ◽  
Treatment Combination ◽  
Yield Parameters ◽  
Randomized Complete Block Design ◽  
Two Factors

A field research was conducted at the Horticultural Farm of Sher-e-Bangla Agricultural University, Dhaka-1207 during the period from October 2017 to March 2018 to study the effect of vermicompost and earthing upon growth and yield of onion. The experiment consists of two factors. Factor-A Vermicompost V0 (control), V1 (6 t ha-1 vermicompost), V2 (10 t ha-1 vermicompost) and V3 (14 t ha-1 vermicompost) and Factor-B Earthing up E0 (control), E1 (Two times earthing up) and E2 (Three times earthing up). The experiment was laid out in RCBD (Randomized Complete Block Design) with three replications. The collected data were statistically analyzed. Results revealed that in terms of vermicompost application The highest fresh weight bulb-1 (40.07 g), yield plot-1 (527.89 g) and yield ha-1 (5.39 t) were found from the treatment V3 compared to V0 (control) treatment. Again, in terms of different earthing up treatments, the highest fresh weight bulb-1 (32.48 g), yield plot-1 (431.67 g) and yield ha-1 (4.41 t) were found from the treatment E2 (Three times earthing up) compared to E0 (control) treatment. Both vermicompost and earthing up and their combination showed a considerable variation on different growth and yield parameters of onion. The highest fresh weight bulb-1 (42.73 g), yield plot-1 (567.33 g) and yield ha-1 (5.79 t) were found from the treatment combination of V3E2 compared to control V0E0 (control) treatment combination. And it may be summarized that 14 t/ha vermicompost with three times earthing up performed the maximum yield compared to other treatments.

scholarly journals Growth and Yield Comparison of French Bean as Influenced by Three Varieties and Nutrients

2021 ◽  
pp. 8-19
Author(s):  
Mousumi Akter ◽  
Tahmina Mostarin ◽  
Khaleda Khatun ◽  
Md. Abdus Samad ◽  
Md. Ehsanul Haq ◽  
...  
Keyword(s):  
Block Design ◽  
Growth Yield ◽  
Maximum Growth ◽  
French Bean ◽  
Growth And Yield ◽  
Treatment Combination ◽  
Pod Yield ◽  
Randomized Complete Block Design ◽  
Two Factors ◽  
Suitable Combination

The experiment was conducted in the Horticultural Farm of Sher-e-Bangla Agricultural University, Dhaka, Bangladesh with aim to find out the suitable variety, optimum nutrients and suitable combination variety and optimum nutrients for maximum growth, yield of French bean in Bangladesh. The experiment consisted of two factors. Factor A: different varieties as V1 = BARI French bean-1, V2= BARI French bean-2, V3= BARI French bean-3 and Factor B: different level of nutrients as N1= cowdung (5 t/ha) + vermicompost (2 t/ha), N2= cowdung (5 t/ha) + N90 P30 K45 kg/ha, N3= cowdung (5 t/ha) + vermicompost (2 t/ha) + N90 P30 K45 kg/ha. The experiment was laid out in a Randomized Complete Block Design with three replications. In case of different varieties of French bean the maximum number of flowers (27.83), the highest number of pod harvested per plant (22.14) and the highest pod yield (15.95 t/ha) were found from V2, whereas the lowest was from V3. For the different levels of nutrients1 the highest number of flowers (25.58), the highest number of pod per plant (20.60) and the highest pod yield (14.10 t/ha) were recorded from N2 treatment, while the lowest was from N1 treatment. Due to the combined effect, the maximum number of flowers (32.02), the maximum number of pod harvested per plant (26.50), the highest pod yield (18.92 t/ha) were observed from V2N2 treatment combination, while the lowest were from V3N1 treatment combination. Therefore, the V2N2 treatment combination appeared to be the best for achieving the higher growth and yield of French bean.

scholarly journals PERTUMBUHAN DAN HASIL TIGA KULTIVAR KACANG HIJAU PADA JARAK TANAM YANG BERBEDA

2020 ◽  
Vol 8 (1) ◽  
pp. 145
Author(s):  
Umi Trisnaningsih
Keyword(s):  
Yield Components ◽  
Seed Weight ◽  
Block Design ◽  
Growth And Yield ◽  
Plant Spacing ◽  
Area Index ◽  
Combination Treatments ◽  
Randomized Complete Block Design ◽  
Materials Used ◽  
Number Of Branches

Growth and Yield of Three Mungbean Cultivars at Different Plant Spacing. This study aims to determine the growth and yield of three mungbean cultivars at different plant spacing. Experiments were carried out at the Experimental Garden, Faculty of Agriculture UGJ from October 2016 to February 2017. The materials used are mungbean seeds cultivar Walet, Murai, and Vima 1, fertilizers Urea, SP 36 and KCl. The experiment was arranged in a Randomized Complete Block Design, with nine combination treatments, consisting of plant spacing (15 cm x 30 cm; 20 cm x 30 cm; and 25 cm x 30 cm) and three cultivars (Walet, Murai and Vima 1). All treatments were repeated three times. The variables observed consisted of plant height, number of branches per plant, leaf area index (LAI) and shoot-root ratio, which was observed at age 21, 28 and 35 days after planting. The yield components, which were observed at harvest included: number of pods per plant and per plot, the weight of 100 dry seeds, harvest index, and seed weight per plant and per plot. The results showed that the distance of Vima 1 cultivar at a spacing of 20 cm x 30 cm gave the highest yield compared to other treatments, namely 385.63 g plot-1.

scholarly journals Effects of Indigenous Mulches on Growth and Yield of Tomato

1970 ◽  
Vol 6 (1) ◽  
pp. 1-6 ◽  
Author(s):  
MA Kayum ◽  
M Asaduzzaman ◽  
MZ Haque
Keyword(s):  
Yield Components ◽  
Water Hyacinth ◽  
Significant Variation ◽  
Maximum Yield ◽  
Growth Yield ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Rainfed Condition ◽  
Tomato Yield ◽  
Banana Leaf

Three popular tomato varieties namely, Ratan, BARI tomato-3 and BARI tomato-6 were experimentally evaluated to identify the potential mulch on growth and yield, where the experiment consisted of four mulching treatments viz. water hyacinth, straw, am-ada leaf and banana leaf with a control (no mulch). The experiment was conducted under rainfed condition. In the experiment, mulching showed significant effect on growth, yield components and thus on the yield of tomato. Yield contributing characters were significantly higher when water hyacinth mulch was used. The variety Ratan produced the highest (53.74 t/ha) fruit yield, while BARI tomato-3 showed the lowest (48.89 t/ha) fruit yield. The combination of mulching and variety exhibited significant variation in some yield components and yield. The combination of water hyacinth and Ratan produced the maximum yield (62.16 t/ha) and thus the experiment revealed that water hyacinth and straw mulches have potentiality to increase the yield of tomato. Key words: Indigenous mulch, growth, yield, tomato.doi:10.3329/jard.v6i1.1650 J Agric Rural Dev 6(1&2), 1-6, June 2008

Effect of Spacing and Fertigation on Growth and Yield Parameters of French Bean (Phaseolus vulgaris L.) under Protected Cultivation

2021 ◽  
Author(s):  
T.M. Neethu ◽  
Nagarajappa Adivappar ◽  
V. Srinivasa ◽  
G.K. Girijesh
Keyword(s):  
Phaseolus Vulgaris ◽  
French Bean ◽  
Growth And Yield ◽  
High Yield ◽  
Research Station ◽  
Phaseolus Vulgaris L ◽  
Treatment Combination ◽  
Yield Parameters ◽  
Protected Cultivation ◽  
Pod Length

Background: French bean (Phaseolus vulgaris L.) is an important and widely grown leguminous vegetable. The area under this crop in protected cultivation is increasing due to its high yield and remunerative price. There is scanty of information on pacing and nutrients for fertigation under protected cultivation. Hence the experiment was carried out to determine the effect of spacing and fertigation on growth and yield parameters in French bean under naturally ventilated polyhouse during Kharif 2018 at Zonal Agricultural and Horticultural Research Station, Navile, Shivamogga.Methods: The experiment was laid out in split plot design with three replications. There were 18 treatment combinations comprised of three different spacing treatments and six fertigation treatments. Result: Among all the treatments significantly highest number of primary branches (8.70) and secondary branches (8.50) at 45 days after sowing (DAS), number of pods plant-1 (220.20), pod length (20.66 cm), pod girth (2.95 cm) and pod weight (17.69g) were recorded in the treatment combination with 60 × 75cm with 44:70:53 kg ha-1 + mulching + micronutrient spray. The least number of primary branches (4.27), secondary branches (4.50), number of pods plant-1 (160.33), pod length (15.61cm), pod girth (1.75 cm) and pod weight (13.88g) were observed in the treatment combination with 60 × 45 cm spacing with 33:52.5:39.75 kg of N:P:K kg ha-1. The higher plant height at 45 DAS (480.50 cm) and yield (13.06 t) for 1000 m-2 was found in treatment combination 60 × 45cm with 44:70:53 kg ha-1 + mulching + micronutrient spray (S3T4). It was concluded from the study that, the closer spacing (60 × 45cm) with the combination of 44:70:53 kg ha-1 (N:P:K), mulching and micronutrient spray resulted in higher pod yield (13.06 t) 1000m-2.

Effect of Plant Spacing on Growth and Yield of Rice (Oryza sativa L.) under Submerged Condition

2019 ◽  
pp. 1-6
Author(s):  
Bhuneshwar Verma ◽  
L. K. Ramteke ◽  
M. Shahid
Keyword(s):  
Oryza Sativa L ◽  
Block Design ◽  
Rice Variety ◽  
Rice Cultivar ◽  
Growth And Yield ◽  
Planting Density ◽  
Plant Spacing ◽  
Submerged Condition ◽  
Rabi Season ◽  
Randomized Complete Block Design

The experiment was conducted to find out the effect of plant spacing on the performance of rice variety IR-64 and IR64-Sub1 under conventional and Submerged condition at the National Rice Research Institute (NRRI), Cuttack, Odisha during the Rabi season of 2018. Different planting densities were maintained using different spacing's. These include (S1) 15 cm × 10 cm, (S2) 15 cm × 20 cm. The experiment was laid out in a randomized complete block design with 3 replications spacing of 15 cm × 10 cm with produced the highest grain yield of 350 gm-2 in submerged condition on IR64-Sub1 rice cultivar, which was significantly higher than the yield with recommended density (15 cm × 10 cm with IR64 Sub1). This yield was increased due to higher number of panicles m-2. This result suggests that higher planting density (15 cm×10 cm) rather than increased number of seedling hill-1 is necessary for getting higher yield of IR-64Sub1 rice cultivar in continuous submerged condition (where V1=IR 64, V2=IR-64 Sub1, S1=15 cm×10 cm, S2=20 cm×15 cm).

scholarly journals Influence of nitrogen and phosphorus on the growth and yield of BRRI dhan57

2016 ◽  
Vol 3 (2) ◽  
pp. 175
Author(s):  
Mahbubul Haque Imrul ◽  
Mst. Afrose Jahan ◽  
Mominul Haque Rabin ◽  
Marjana Yeasmin ◽  
Md. Abubakar Siddik ◽  
...  
Keyword(s):  
Block Design ◽  
Growth And Yield ◽  
Treatment Combination ◽  
Experiment Data ◽  
Nitrogen And Phosphorus ◽  
Randomized Complete Block Design ◽  
Biological Yield ◽  
Four Levels ◽  
1000 Grain Weight ◽  
Time Of Harvest

The field experiment was carried out during the period from July to November, 2013 at the research farm of Sher-e-Bangla Agricultural University, Dhaka, Bangladesh to investigate the influence of nitrogen and phosphorus on the growth and yield of BRRI dhan57. The two factorial experiments were laid out in a Randomized Complete Block Design (RCBD) with three replications. Four levels of nitrogen N0: 0 kg N ha-1, N1: 90 kg N ha-1, N2: 120 kg N ha-1, N3: 150 kg N ha-1 and three levels of phosphorous P0: 0 kg P2O5 ha-1, P1: 25 kg P2O5 ha-1 and P2: 35 kg P2O5 ha-1 were used in this experiment. Data revealed that at 30 and 60 days after transplanting (DAT) and at the time of harvest the tallest plants were observed in the treatments N2 (120 kg N ha-1), P2 (35 kg P ha-1) and treatment combination N2P2 (120 kg N and 35 kg P ha-1) whereas, the treatments N0, P0 and treatment combination N0P0 (without N and P) showed the smallest plant height in each case, respectively. Side by side, N2,P2 treatments and N2P2 treatment combination gave the maximum effective tillers hill-1, highest length of panicle and the maximum filled grains panicle-1. The highest 1000 grain weight (20.85 g), grain yield (4.95 t ha-1), straw yield (5.39 t ha-1) and biological yield (10.34 t ha-1) were found in the treatment combination N2P2 and also found highest in each individual under N2 and P2 treatments.

scholarly journals Effect of Different Rates of N and Intrarow Spacing on Growth Performance of Lettuce (Lactuca sativa L.) in Gurage Zone, Wolkite University, Ethiopia

2020 ◽  
Vol 2020 ◽  
pp. 1-6
Author(s):  
Bewuket Gashaw ◽  
Shewaye Haile
Keyword(s):  
Block Design ◽  
Maximum Yield ◽  
Dry Weight ◽  
Optimum Level ◽  
Plant Spacing ◽  
Fresh Weight ◽  
Randomized Complete Block Design ◽  
Main Effect ◽  
Demonstration Site ◽  
Four Levels

A field experiment was conducted in Wolkite University, Horticulture department practical demonstration site, from February to June 2019 with the objective of determining the optimum level of N and intrarow spacing for better growth of lettuce. The experiment consisted of four levels of N (N0 (0 kg/ha), N1 (50 kg/ha), N2 (100 kg/ha), and N3 (150 kg/ha)) and three levels of intrarow spacing (S1 (15 × 30 cm), S2 (20 × 30 cm), and S3 (25 × 30 cm)). The interrow spacing was maintained as 30 cm. The experiment was laid out in 3 × 4 factorial arrangement in a randomized complete block design (RCBD) and replicated three times. The main effect of nitrogen resulted maximum yield (9.45 ton/ha), dry weight per plant (28.75 g), and fresh weight per plant (57.57 g) which were recorded by the application of 150 kg/ha nitrogen. Likewise, the main effect of intrarow spacing gave maximum yield (8.01 ton/ha), dry weight per plant (21.31 g), and fresh weight per plant (59.15 g) from 25 × 30 cm plant spacing. For interaction effect, the highest yield (10.38 ton/ha), dry weight per plant (50.96 g), and fresh weight per plant (77.88 g) was found from N3S3 (150 kg/ha N and 25 × 30 cm plant spacing). Therefore, in the study, area using 150 kg/ha urea with 25 × 30 cm plant spacing could be advisable for optimum lettuce production.

Effect of Organic and Inorganic Fertilization on Growth and Yield of French Bean (Phaseolus vulgaris L.) in Fiji

2020 ◽  
Author(s):  
H. K. Sachan ◽  
Deeksha Krishna
Keyword(s):  
Phaseolus Vulgaris ◽  
Growth Parameters ◽  
Block Design ◽  
Poultry Manure ◽  
French Bean ◽  
Growth And Yield ◽  
Phaseolus Vulgaris L ◽  
Inorganic Fertilizers ◽  
Yield Attributes ◽  
Organic And Inorganic Fertilizers

Background: French bean is used both as dry seeds or as green pod vegetable and it is in increasing demand throughout Fiji. Limited agronomical information is available for its cultivation which is one of the barriers in increasing its production in country. This research aimed to study the influence of organic and inorganic fertilizers on growth and yield of (Phaseolus vulgaris L.) in Fiji. Methods: This research was conducted during April to September 2018 in a Randomized Block Design with three replications and seven treatments of organic and inorganic fertilizers. Observations on growth parameters and yield attributes were recorded and analyzed using analysis of variance technique. Result: Organic and inorganic fertilizers combinations significantly increase the growth and green pod yield of French bean. The applications of nutrient in combination of organic and inorganic fertilizers were found more effective than inorganic fertilizers or organic manure alone for growth and yield of French bean. The combination of 100% NPK (200 kg ha-1) along with Poultry manure @ 5 t ha-1 was found most effective for enhancing growth and yield. It was recorded that on the basis of yield and growth performance treatment 100% NPK along with PM @ 5 t ha-1 was superior.

scholarly journals Effects of urea and cowdung on growth and yield of carrot

2012 ◽  
Vol 10 (1) ◽  
pp. 9-13 ◽  
Author(s):  
T A Mehedi ◽  
M A Siddique ◽  
Sonia B Shahid
Keyword(s):  
Block Design ◽  
Growth And Yield ◽  
Cost Ratio ◽  
Treatment Combination ◽  
Marketable Yield ◽  
Benefit Cost Ratio ◽  
Nitrogenous Fertilizer ◽  
Randomized Complete Block Design ◽  
Benefit Cost ◽  
Different Levels

A field experiment was carried out to study the effects of inorganic nitrogenous fertilizer and organic cowdung manure on growth and yield of carrot. Three different levels of urea along with three different levels of cowdung were employed in the investigation following randomized complete block design. The result revealed that the application of 150 kg N ha-1 as urea was found suitable for maximum gross and marketable yield (47.35 t ha-1 and 39.0 t ha-1, respectively), while 15 t cowdung ha-1 showed better gross and marketable yield (38.13 t ha-1 and 30.42 t ha-1 , respectively). Regarding the combined effect, the combination of 150 kg N ha-1 and 15 t cowdung ha-1 resulted in the best performance in gross and marketable yields (51.22 t ha-1 and 43.41 t ha-1, respectively). The net return (TK. 211142 ha-1) and benefit cost ratio (4.61) were maximum in the treatment combination of 150 kg N ha-1 in the form of urea and 15 t cowdung ha-1.DOI: http://dx.doi.org/10.3329/jbau.v10i1.12012J. Bangladesh Agril. Univ. 10(1): 9–13, 2012

Sign in / Sign up

Export Citation Format

Share Document