MANAJEMEN RISIKO KESEHATAN DAN KESELAMATAN KERJA (K3) Studi Kasus Pada Praktek Acuan Perancah Dan Praktek Kayu Jurusan Teknik Sipil

2021 ◽  
Vol 9 (2) ◽  
pp. 57-60
Author(s):  
Udi Subagyo

Politeknik Negeri Malang adalah lembaga pendidikan profesional dalam jaringan pendidikan global dengan reputasi di bidang ilmu pengetahuan dan teknologi terapan, dalam hal tersebut jurusan teknik Sipil mempunyai kegiatan praktek kerja bengkel yang menunjang skill mahasiswa untuk dunia konstruksi. Oleh karena pekerjaan praktek acuan dan perancah dan praktek kerja kayu juga mengandung unsur unsur bahaya pekerjaan maka diperlukan Manajemen Risiko Kesehatan Dan Keselamatan Kerja (K3). Hasil manajemen resiko pada praktek acuan & perancah terdapat 16 potensi bahaya risiko dari 5 proses kegiatan dengan potensi bahaya cukup besar adalah : Orang Jatuh 25% , dengan pekerjaan High Risk pada pekerjaan Scafolding 70%, dengan rekomendasi Penggunaan APD 85%, Eliminasi 29%,Engineering Control 29%, Tanda Peringatan,label & administrasi 28% dan Substitusi 19%. Dan pada praktek pekerjaan kayu terdapat 15 potensi bahaya risiko dari 3 proses kegiatan dengan potensi bahaya cukup besar adalah : Bising 21% , dengan pekerjaan High Risk pada pekerjaan pekerjaan Kayu menggunakan Mesin Statis 85% dengan rekomendasi Penggunaan APD 94%,Engineering Control 67%,Substitusi 14%,Tanda Peringatan,label & administrasi 7% dan Eliminasi 7%.

2019 ◽  
Vol 13 (2) ◽  
pp. 132
Author(s):  
Udi Udi Subagyo

Politeknik Negeri Malang adalah lembaga pendidikan profesional dalam jaringan pendidikan global dengan reputasi di bidang ilmu pengetahuan dan teknologi terapan, dalam hal tersebut jurusan teknik Sipil mempunyai kegiatan praktek kerja bengkel yang menunjang skill mahasiswa untuk dunia konstruksi. Oleh karena pekerjaan praktek acuan dan perancah dan praktek kerja kayu juga mengandung unsur unsur bahaya pekerjaan maka diperlukan Manajemen Risiko  Kesehatan Dan Keselamatan Kerja (K3).Hasil metode pengendalian resiko pada praktek acuan & perancah terdapat 16 potensi bahaya risiko dari 5 proses kegiatan dengan potensi bahaya cukup besar adalah : Orang Jatuh 25% , dengan pekerjaan High Risk pada pekerjaan Scafolding 70%, dengan rekomendasi Penggunaan APD 85%, Eliminasi 29%,Engineering Control 29%, Tanda Peringatan,label & administrasi 28% dan Substitusi 19%. Dan pada praktek pekerjaan kayu terdapat 15 potensi bahaya risiko dari 3 proses kegiatan dengan potensi bahaya cukup besar adalah :  Bising 21% , dengan pekerjaan High Risk pada pekerjaan pekerjaan Kayu menggunakan Mesin Statis 85% dengan rekomendasi Penggunaan APD 94%,Engineering Control 67%,Substitusi 14%,Tanda Peringatan,label & administrasi 7% dan Eliminasi 7%.


Author(s):  
Hendar Sunandar ◽  
Doni Hikmat Ramdhan

An offshore platform is a workplace with complex facilities and limited space due to the complex installed equipment and components. Therefore, the offshore as enclosed area platform is more likely to have a high risk of COVID-19 outbreak. Furthermore, a company must strictly follow health protocols to prevent workers from being exposed to COVID-19 in the offshore workplace. However, workers are often forced to onboard without proper health protocols because of operational needs and production targets. This paper aimed to explore the essence of the steps in preventing and controlling COVID-19 in the offshore workplace and the challenges. The analysis found that the company must take preventive measures against COVID-19 before workers are on board and in the workplace and control it using the hierarchy of control: engineering control, administrative control, and personal protective equipment (PPE).


Author(s):  
Harry A. Atwater ◽  
C.M. Yang ◽  
K.V. Shcheglov

Studies of the initial stages of nucleation of silicon and germanium have yielded insights that point the way to achievement of engineering control over crystal size evolution at the nanometer scale. In addition to their importance in understanding fundamental issues in nucleation, these studies are relevant to efforts to (i) control the size distributions of silicon and germanium “quantum dots𠇍, which will in turn enable control of the optical properties of these materials, (ii) and control the kinetics of crystallization of amorphous silicon and germanium films on amorphous insulating substrates so as to, e.g., produce crystalline grains of essentially arbitrary size.Ge quantum dot nanocrystals with average sizes between 2 nm and 9 nm were formed by room temperature ion implantation into SiO2, followed by precipitation during thermal anneals at temperatures between 30°C and 1200°C[1]. Surprisingly, it was found that Ge nanocrystal nucleation occurs at room temperature as shown in Fig. 1, and that subsequent microstructural evolution occurred via coarsening of the initial distribution.


1982 ◽  
Vol 47 (4) ◽  
pp. 373-375 ◽  
Author(s):  
James L. Fitch ◽  
Thomas F. Williams ◽  
Josephine E. Etienne

The critical need to identify children with hearing loss and provide treatment at the earliest possible age has become increasingly apparent in recent years (Northern & Downs, 1978). Reduction of the auditory signal during the critical language-learning period can severely limit the child's potential for developing a complete, effective communication system. Identification and treatment of children having handicapping conditions at an early age has gained impetus through the Handicapped Children's Early Education Program (HCEEP) projects funded by the Bureau of Education for the Handicapped (BEH).


1983 ◽  
Vol 48 (1) ◽  
pp. 110-110

For the November 1982 JSHD article, "A Community Based High Risk Register for Hearing Loss," the author would like to acknowledge three additional individuals who made valuable contributions to the study. They are Marie Carrier, Gene Lyon, and Bobbie Robertson.


1997 ◽  
Vol 27 (11) ◽  
pp. 1247-1253 ◽  
Author(s):  
M. L. BURR ◽  
T. G. MERRETT ◽  
F. D. J. DUNSTAN ◽  
M. J. MAGUIRE
Keyword(s):  

2001 ◽  
Vol 120 (5) ◽  
pp. A120-A121
Author(s):  
H STRUL ◽  
E BIRENBAUM ◽  
B STERN ◽  
D KAZANOV ◽  
L THEODOR ◽  
...  

2001 ◽  
Vol 120 (5) ◽  
pp. A376-A376
Author(s):  
B JEETSANDHU ◽  
R JAIN ◽  
J SINGH ◽  
M JAIN ◽  
J SHARMA ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document