A MODEL FOR THE STUDY OF TRAFFIC FLOW ON THE UKRAINIAN CITIES ROAD NETWORK

Author(s):  
Liydmila Nagrebelna

The problems of efficient functioning of the city road network are outlined. The method by which it is possible to improve the functioning of the street-road network of Ukrainian cities is presented. Improving the efficiency of the urban road network is to use all the resources of this network to create the necessary languages for its reliable and efficient operation and reduce the negative effects of motorization. It is proved that in order to ensure the effective functioning of the road network it is necessary to carry out a set of measures for the organization and management of traffic. The purpose of this article is to identify factors that affect the deterioration of operating conditions; identify the conditions for the effective functioning of the road network; the choice of a model for the effective functioning of the street-road network of Ukrainian cities is grounded. Because the management impact on traffic flow can be estimated on the basis of the developed models. Keywords: road network, efficient operation, methods, conditions.

2022 ◽  
Vol 13 (2) ◽  
pp. 1-25
Author(s):  
Bin Lu ◽  
Xiaoying Gan ◽  
Haiming Jin ◽  
Luoyi Fu ◽  
Xinbing Wang ◽  
...  

Urban traffic flow forecasting is a critical issue in intelligent transportation systems. Due to the complexity and uncertainty of urban road conditions, how to capture the dynamic spatiotemporal correlation and make accurate predictions is very challenging. In most of existing works, urban road network is often modeled as a fixed graph based on local proximity. However, such modeling is not sufficient to describe the dynamics of the road network and capture the global contextual information. In this paper, we consider constructing the road network as a dynamic weighted graph through attention mechanism. Furthermore, we propose to seek both spatial neighbors and semantic neighbors to make more connections between road nodes. We propose a novel Spatiotemporal Adaptive Gated Graph Convolution Network ( STAG-GCN ) to predict traffic conditions for several time steps ahead. STAG-GCN mainly consists of two major components: (1) multivariate self-attention Temporal Convolution Network ( TCN ) is utilized to capture local and long-range temporal dependencies across recent, daily-periodic and weekly-periodic observations; (2) mix-hop AG-GCN extracts selective spatial and semantic dependencies within multi-layer stacking through adaptive graph gating mechanism and mix-hop propagation mechanism. The output of different components are weighted fused to generate the final prediction results. Extensive experiments on two real-world large scale urban traffic dataset have verified the effectiveness, and the multi-step forecasting performance of our proposed models outperforms the state-of-the-art baselines.


Author(s):  
Колупаева ◽  
P. Kolupaeva ◽  
Гаваев ◽  
A. Gavaev

The paper presents the results of calculations aimed at improving the organization of road traffic and increase road capacity by installing calling devices at pedestrian crossings. Methods of development and effective functioning of the road network of the city of Tyumen


Author(s):  
Badal Dev Roy ◽  
R. Saravanan

The Turbocharger is a charge booster for internal combustion engines to ensure best engine performance at all speeds and road conditions especially at the higher load.  Random selection of turbocharger may lead to negative effects like surge and choke in the breathing of the engine. Appropriate selection or match of the turbocharger (Turbomatching) is a tedious task and expensive. But perfect match gives many distinguished advantages and it is a one time task per the engine kind. This study focuses to match the turbocharger to desired engine by simulation and on road test. The objective of work is to find the appropriateness of matching of turbochargers with trim 67 (B60J67), trim 68 (B60J68),  trim 70 (A58N70) and trim 72 (A58N72) for the TATA 497 TCIC -BS III engine. In the road-test (data-logger method) the road routes like highway and slope up were considered for evaluation. The operating conditions with respect various speeds, routes and simulated outputs were compared with the help of compressor map.


2021 ◽  
Vol 22 (1) ◽  
pp. 15-28
Author(s):  
K. Sai Sahitya ◽  
Csrk Prasad

Abstract A sustainable transportation system is possible only through an efficient evaluation of transportation network performance. The efficiency of the transport network structure is analyzed in terms of its connectivity, accessibility, network development, and spatial pattern. This study primarily aims to propose a methodology for modeling the accessibility based on the structural parameters of the urban road network. Accessibility depends on the arrangement of the urban road network structure. The influence of the structural parameters on the accessibility is modeled using Multiple Linear Regression (MLR) analysis. The study attempts to introduce two methods of Artificial Intelligence (AI) namely Artificial Neural Networks (ANN) and Adaptive network-based neuro-fuzzy inference system (ANFIS) in modeling the urban road network accessibility. The study also focuses on comparing the results obtained from MLR, ANN and ANFIS modeling techniques in predicting the accessibility. The results of the study present that the structural parameters of the road network have a considerable impact on accessibility. ANFIS method has shown the best performance in modeling the road network accessibility with a MAPE value of 0.287%. The present study adopted Geographical Information Systems (GIS) to quantify, extract and analyze different features of the urban transportation network structure. The combination of GIS, ANN, and ANFIS help in improved decision-making. The results of the study may be used by transportation planning authorities to implement better planning practices in order to improve accessibility.


2019 ◽  
Vol 8 (6) ◽  
Author(s):  
Polina A. Buyvol ◽  
Gulnara A. Yakupova ◽  
Irina V. Makarova

The transport system plays an important role in human activities and is an integral part of the successful functioning of the urbanized area. The increasing degree of provision of urban residents with transport services should at the same time keep the environment environmentally friendly and sustainable over time. The article is devoted to the issues of ensuring the rational functioning of the city transport system based on the development and implementation of an intelligent road infrastructure management system, the intellectual core of which are simulation models of problem areas of the road network. The objective of the study is the development of tools for organizing traffic in the conditions of the rapid growth of the fleet of vehicles. Research tasks were to analyze the research in the field of traffic management, to consider methods to reduce and prevent traffic jams on roads in general and in individual sections in particular. The following research methods were used: methods of system analysis, methods of modeling traffic flows, simulation, computer experiment. Achievements: the developed simulation model can be used to conduct a computer experiment in order to select the optimal parameters for the functioning of traffic lights on a specific section of the road network of the city of Naberezhnye Chelny


2012 ◽  
Vol 22 (6) ◽  
pp. 405-411
Author(s):  
Mohammad Reza Jelokhani-Niaraki ◽  
Ali Asghar Alesheikh ◽  
Abbas Alimohammadi ◽  
Abolghasem Sadeghi-Niaraki

In recent years, the development of the GIS-T (Geographic Information System for Transportation) applications has gained much attention, providing the transportation planners and managers with in-depth knowledge to achieve better decisions. Needless to say, developing a successful GIS for transportation applications is highly dependent on the design of a well-structured data model. Dynamic segmentation (DS) data model is a popular one being used more and more for different GIS-T analyses, serving as a data model that splits linear features into new set of segments wherever its attributes change. In most cases, the sets of segments presenting a particular attribute change frequently. Transportation managers place great importance on having regular update and revision of segmented data to ensure correct and precise decisions are made. However, updating the segmented data manually is a difficult task and a time-consuming process to do, demanding an automatic approach. To alleviate this, the present study describes a rule-based method using topological concept to simply update road segments and replace the manual tasks that users are to carry out. The proposed approach was employed and implemented on real road network data of the City of Tehran provided by the Road Maintenance and Transportation Organization (RMTO) of Iran. The practical results demonstrated that the time, cost, human-type errors, and complexity involved in update tasks are all reduced. KEYWORDS: GIS-T, dynamic segmentation, segment, automatic update, change type, rule


2014 ◽  
Vol 26 (3) ◽  
pp. 235-242 ◽  
Author(s):  
Katarzyna KOCUR-BERA

This paper discusses the issue of statistical analysis of traffic flow in different regions of Poland. Such analysis allows us to identify “valuable (sensitive) areas” whose damage or blockage may provoke considerable disturbances or even a stoppage of traffic flow in the examined road network. The results of the studies indicate that the road network in Poland has the properties of a scale-free network. The distribution of the examined variables does not have a normal character, whereas the relationship between the number of nodes and the number of connections is a power-law feature. 


2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Minzhi Chen ◽  
Fan Wu ◽  
Min Yin ◽  
Jiangang Xu

Planning of road networks is fundamental for public transportation. The impact of road network density on public transportation has been extensively studied, but few studies in this regard involved evaluation indicators for connectivity and layout of road networks. With 29 cities in China as the study cases, this paper quantifies the layout structure of the road network based on the network’s betweenness centralization and establishes a multivariate linear regression model to perform regression of the logarithm of the frequency of per capita public transportation on betweenness centralization. It is found in the present work that there is a significant correlation between the layout structure of an urban road network and the residents’ utilization degree of public transportation. A greater betweenness centralization of the urban road network, namely a more centralized road network, means a higher frequency of per capita public transportation of urban residents and a higher degree of the residents’ utilization of public transportation. In the development of public transportation, centralized and axial-shaped layout structures of road networks can be promoted to improve the utilization of public transportation.


2011 ◽  
Vol 97-98 ◽  
pp. 512-517
Author(s):  
Wen Jie Zou ◽  
Jian Cheng Weng ◽  
Jian Rong ◽  
Wei Zhou

In order to improve the reliability of urban road network operation evaluation, the road network regional Partition methods were launched in this paper. The geographic grid was introduced first, and a 4-level road network model was defined. Then, the spatial analysis based urban road network division method was proposed by analyzing the characteristics of road network operation. This method can reflect the influence between adjacent regional units, and improve the reliability of urban road network division. Finally, this research took a certain area in Beijing as a case study, and divided the road network as several regional units. Macroscopic evaluation result shows that it is effective for scientifically describing the road network operation status.


Sign in / Sign up

Export Citation Format

Share Document