scholarly journals Research on Minimum Miscible Pressure Between Crude Oil and Supercritical Carbon Dioxide System in Ultra-Low Permeability Reservoir by the Long-Slim-Tube Experiment Method

2021 ◽  
Vol 9 ◽  
Author(s):  
Guangjuan Fan ◽  
Yuejun Zhao ◽  
Xiaodan Zhang ◽  
Yilin Li ◽  
Hao Chen
Keyword(s):  
Carbon Dioxide ◽  
Crude Oil ◽  
Oil Recovery ◽  
Low Permeability ◽  
Recovery Ratio ◽  
Experiment Method ◽  
Miscible Flooding ◽  
Enhance Oil Recovery ◽  
Low Permeability Reservoirs ◽  
Experimental Pressure

Carbon dioxide (CO2) injection has become an important technology to enhance oil recovery in ultra-low permeability reservoirs. Compared with other CO2 flooding technologies, CO2 miscible flooding has a better development effect, and the minimum miscible pressure (MMP) is a key parameter to realize miscible flooding. Therefore, it is very important to accurately predict the MMP. The prediction methods of MMP generally include laboratory experiment method and theoretical calculation method. In this study, a long-slim-tube displacement experiment method was used to determine the MMP in the study area, and the experimental temperature and pressure were consistent with those under reservoir conditions. The research results show that the recovery ratio increased gradually with the increase of experimental pressure, but the increase amplitude gradually decreased. According to the relation curve between crude oil recovery ratio and experimental displacement pressure, when the experimental pressure was larger than 29.6 MPa, the recovery ratio did not increase significantly with the increase of displacement pressure, which indicates that the interfacial tension between crude oil and CO2 disappeared under this pressure and they reached a miscible state. It is speculated that the MMP between crude oil and CO2 system in the study area predicted by the long-slim-tube displacement experiment method was 29.6 MPa. The results of this study help to realize miscible flooding in ultra-low permeability reservoirs and thus enhance oil recovery.

scholarly journals Improving Oil Recovery of the Heterogeneous Low Permeability Reservoirs by Combination of Polymer Hydrolysis Polyacrylamide and Two Highly Biosurfactant-Producing Bacteria

2021 ◽  
Vol 14 (1) ◽  
pp. 423
Author(s):  
Shuwen Xue ◽  
Yanhong Zhao ◽  
Chunling Zhou ◽  
Guangming Zhang ◽  
Fulin Chen ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Low Permeability ◽  
Bacterial Fermentation ◽  
The Core ◽  
Oil Displacement ◽  
Polymer Hydrolysis ◽  
Enhance Oil Recovery ◽  
Low Permeability Reservoirs ◽  
Microbial Flooding ◽  
Poly Acrylamide

Polymer hydrolysis polyacrylamide and microbes have been used to enhance oil recovery in many oil reservoirs. However, the application of this two-method combination was less investigated, especially in low permeability reservoirs. In this work, two bacteria, a rhamnolipid-producing Pseudomonas aeruginosa 8D and a lipopeptide-producing Bacillus subtilis S4, were used together with hydrolysis poly-acrylamide in a low permeability heterogeneous core physical model. The results showed that when the two bacterial fermentation liquids were used at a ratio by volumeof 1:3 (v:v), the mixture showed the optimal physicochemical properties for oil-displacement. In addition, the mixture was stable under the conditions of various temperature (20–70 °C) and salinity (0–22%). When the polymer and bacteria were mixed together, it had no significant effects in the viscosity of polymer hydrolysis polyacrylamide and the viability of bacteria. The core oil-displacement test displayed that polymer hydrolysis polyacrylamide addition followed by the bacterial mixture injection could significantly enhance oil recovery. The recovery rate was increased by 15.01% and 10.03%, respectively, compared with the sole polymer hydrolysis polyacrylamide flooding and microbial flooding. Taken together, these results suggest that the strategy of polymer hydrolysis poly-acrylamide addition followed by microbial flooding is beneficial for improving oil recovery in heterogeneous low permeability reservoirs.

Lab Studies of MEOR Strains Optimization for High Salinity Reservoirs

2011 ◽  
Vol 343-344 ◽  
pp. 844-848
Author(s):  
Jing Chun Wu ◽  
Xiao Ming Lv ◽  
Zhi Jie Ou ◽  
Dai Yin Yin
Keyword(s):  
Crude Oil ◽  
Oil Recovery ◽  
Produced Water ◽  
High Salinity ◽  
Low Permeability ◽  
Displacement Effect ◽  
Physical Experiments ◽  
Fermentation Liquor ◽  
Laboratory Results ◽  
Low Permeability Reservoirs

.Aiming at the high salinity at low-permeability reservoirs, a strain named S-4 that can yield a kind of bio-surfactants was screened from the produced water of oil wells in use of the Hemolysis of the bio-surfactants and its characteristics of making the color of blue gel plate change in its formation process. The laboratory results show that the surface tension of the strains fermentation liquor becomes less than 30mN/m after cultured by crude oil as the carbon source, and it would remain at the value of 31mN/m even if the concentration becomes a half; this bio-surfactant keeps stable when the salinity is in the range of 4000mg/L～50000mg/L; In physical experiments the strains can improve crude oil recovery ratio by 4% which shows a good oil displacement effect.

scholarly journals Research for reducing the Minimum Miscible Pressure of crude oil and carbon dioxide by injecting citric acid isobutyl ester

2021 ◽  
Vol 76 ◽  
pp. 30
Author(s):  
Guangjuan Fan ◽  
Yuejun Zhao ◽  
Yilin Li ◽  
Xiaodan Zhang ◽  
Hao Chen
Keyword(s):  
Carbon Dioxide ◽  
Citric Acid ◽  
Crude Oil ◽  
Oil Recovery ◽  
Research Area ◽  
Fracture Pressure ◽  
Miscible Flooding ◽  
Carbon Dioxide Miscible Flooding ◽  
Isobutyl Ester ◽  
Key Parameter

Carbon dioxide miscible flooding has become one of the important technologies for improving oil recovery. The Minimum Miscible Pressure (MMP) is the key parameter to realize miscible flooding. As the MMP in the research area is higher than the formation fracture pressure, miscible flooding cannot be formed. To address this problem, it is necessary to find a way to reduce the MMP. Citric acid isobutyl ester is chosen to reduce the MMP of carbon dioxide and crude oil in this research. The effect of citric acid isobutyl ester on reducing the MMP was measured by the method of long-slim-tube displacement experiment. The experiment results show that the MMP is 29.6 MPa and can be obviously reduced by injecting the slug of citric acid isobutyl ester. The MMP could decrease gradually with constantly adding the injected slug of citric acid isobutyl ester, but the decrease becomes smaller and smaller. The optimum injected slug size of the chemical reagent is 0.003 PV. Under the condition of the slug size, the MMP is reduced to 23.5 MPa and the reduction is 6.1 MPa.

scholarly journals Stimulation of indigenous microbes by optimizing the water cut in low permeability reservoirs for green and enhanced oil recovery

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Kai Cui ◽  
Zhiyong Zhang ◽  
Zhongzhi Zhang ◽  
Shanshan Sun ◽  
Hailan Li ◽  
...  
Keyword(s):  
Crude Oil ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Low Permeability ◽  
Petroleum Reservoir ◽  
Activation Time ◽  
Water Cut ◽  
Microbial Groups ◽  
Low Permeability Reservoirs ◽  
Stimulation Of

Abstract Low permeability oil reservoirs are a widespread petroleum reservoir type all over the world. Therefore, methods to recover these reservoirs efficiently are of importance to guarantee energy supply. Here we report our novel stimulation of indigenous microbes by optimizing the water cut in low permeability reservoirs for green and enhanced oil recovery. We aimed to investigate the characteristics of indigenous bacterial communities with changes in water cut in reservoirs by high-throughput sequencing technology, and reveal the mechanism and characteristics of the crude oil biotreatment under different crude oil-water ratio conditions and the optimum activation time of indigenous functional microbial groups in reservoirs. The indigenous microbial metabolism products were characterized by gas chromatography mass spectrometry. Results showed that Acinetobacter (47.1%) and Pseudomones (19.8%) were the main functional genus of crude oil degradation at the optimal activation time, and can reduce the viscosity of crude oil from 8.33 to 5.75 mPa·s. The dominant bacteria genus for oil recovery after activation of the production fluids was similar to those in the reservoirs with water cut of 60–80%. Furthermore seven mechanism pathways of enhancing oil recovery by the synergistic of functional microbial groups and their metabolites under different water cut conditions in low permeability reservoirs have been established.

ASSESSMENT OF OIL WELL PRODUCTIVITY IN LOW-PERMEABILITY RESERVOIRS IN THE FIELDS OF EASTERN SIBERIA

2017 ◽  
pp. 30-36
Author(s):  
R. V. Urvantsev ◽  
S. E. Cheban
Keyword(s):  
Oil Recovery ◽  
Large Scale ◽  
Oil And Gas ◽  
Oil Extraction ◽  
Low Permeability ◽  
Oil Well ◽  
Eastern Siberia ◽  
Development Costs ◽  
Traditional Fields ◽  
Low Permeability Reservoirs

The 21st century witnessed the development of the oil extraction industry in Russia due to the intensifica- tion of its production at the existing traditional fields of Western Siberia, the Volga region and other oil-extracting regions, and due discovering new oil and gas provinces. At that time the path to the development of fields in Eastern Siberia was already paved. The large-scale discoveries of a number of fields made here in the 70s-80s of the 20th century are only being developed now. The process of development itself is rather slow in view of a number of reasons. Create a problem of high cost value of oil extraction in the region. One of the major tasks is obtaining the maximum oil recovery factor while reducing the development costs. The carbonate layer lying within the Katangsky suite is low-permeability, and its inventories are categorised as hard to recover. Now, the object is at a stage of trial development,which foregrounds researches on selecting the effective methods of oil extraction.

Development of the Surfactant-Based Chemical EOR Formula for Low Permeability Reservoirs

2021 ◽  
Author(s):  
Nancy Chun Zhou ◽  
Meng Lu ◽  
Fuchen Liu ◽  
Wenhong Li ◽  
Jianshen Li ◽  
...  
Keyword(s):  
Phase Behavior ◽  
Oil Recovery ◽  
Aqueous Solubility ◽  
Low Permeability ◽  
Chemical Flooding ◽  
Residual Oil ◽  
Key Factors ◽  
Low Salinity ◽  
Low Tension ◽  
Low Permeability Reservoirs

Abstract Based on the results of the foam flooding for our low permeability reservoirs, we have explored the possibility of using low interfacial tension (IFT) surfactants to improve oil recovery. The objective of this work is to develop a robust low-tension surfactant formula through lab experiments to investigate several key factors for surfactant-based chemical flooding. Microemulsion phase behavior and aqueous solubility experiments at reservoir temperature were performed to develop the surfactant formula. After reviewing surfactant processes in literature and evaluating over 200 formulas using commercially available surfactants, we found that we may have long ignored the challenges of achieving aqueous stability and optimal microemulsion phase behavior for surfactant formulations in low salinity environments. A surfactant formula with a low IFT does not always result in a good microemulsion phase behavior. Therefore, a novel synergistic blend with two surfactants in the formulation was developed with a cost-effective nonionic surfactant. The formula exhibits an increased aqueous solubility, a lower optimum salinity, and an ultra-low IFT in the range of 10-4 mN/m. There were challenges of using a spinning drop tensiometer to measure the IFT of the black crude oil and the injection water at reservoir conditions. We managed the process and studied the IFTs of formulas with good Winsor type III phase behavior results. Several microemulsion phase behavior test methods were investigated, and a practical and rapid test method is proposed to be used in the field under operational conditions. Reservoir core flooding experiments including SP (surfactant-polymer) and LTG (low-tension-gas) were conducted to evaluate the oil recovery. SP flooding with a selected polymer for mobility control and a co-solvent recovered 76% of the waterflood residual oil. Furthermore, 98% residual crude oil recovery was achieved by LTG flooding through using an additional foaming agent and nitrogen. These results demonstrate a favorable mobilization and displacement of the residual oil for low permeability reservoirs. In summary, microemulsion phase behavior and aqueous solubility tests were used to develop coreflood formulations for low salinity, low temperature conditions. The formulation achieved significant oil recovery for both SP flooding and LTG flooding. Key factors for the low-tension surfactant-based chemical flooding are good microemulsion phase behavior, a reasonably aqueous stability, and a decent low IFT.

Sign in / Sign up

Export Citation Format

Share Document