scholarly journals The Impact of Steady Blowing from the Leading Edge of an Open Cavity Flow

Aerospace ◽  
2021 ◽  
Vol 8 (9) ◽  
pp. 255
Author(s):  
Naser Al Haddabi ◽  
Konstantinos Kontis ◽  
Hossein Zare-Behtash
Keyword(s):  
Shear Layer ◽  
Broad Band ◽  
Leading Edge ◽  
Open Cavity ◽  
Small Scale ◽  
Return Flow ◽  
Flow Visualisation ◽  
Separated Shear Layer ◽  
Wide Range ◽  
The Impact

Cavity flows occur in a wide range of low-speed applications (Mach number ≤0.3), such as aircraft wheel wells, ground transportation, and pipelines. In the current study, a steady jet is forced from a cavity leading edge at different momentum fluxes (0.11 kg/ms2, 0.44 kg/m·s2, and 0.96 kg/m·s2). The investigation was performed for an open cavity with length to depth ratio of 4 at the Reynolds number based on a cavity depth of approximately 50,000. Particle image velocimetry, surface oil flow visualisation, constant temperature anemometry, and pressure measurements were performed in this investigation. The aim of the jet blowing is to separate the cavity separated shear layer from the recirculation zone to reduce the cavity return flow, and hence stabilise the cavity separated shear layer. It was found that increasing the jet momentum flux causes an increase in the cavity return flow due to the increase in the thickness of the cavity separated shear layer. The study also found that the jet populates the separated shear layer with a large number of small-scale disturbances. These disturbances increase the broad band level of the pressure power spectra and Reynolds shear stress in the cavity separated shear layer. On the other hand, the jet disturbances make the shedding of the large vortical structures more intermittent.

scholarly journals Coping with abrupt environmental change: the impact of the coastal El Niño 2017 on artisanal fisheries and mariculture in North Peru

2018 ◽  
Vol 76 (4) ◽  
pp. 1122-1130 ◽  
Author(s):  
Lotta Clara Kluger ◽  
Sophia Kochalski ◽  
Arturo Aguirre-Velarde ◽  
Ivonne Vivar ◽  
Matthias Wolff
Keyword(s):  
El Niño ◽  
El Nino ◽  
Management Strategies ◽  
Small Scale ◽  
Artisanal Fisheries ◽  
Economic Activities ◽  
Economic Sectors ◽  
Wide Range ◽  
The Impact ◽  
Coastal El Niño

Abstract In February and March 2017, a coastal El Niño caused extraordinary heavy rains and a rise in water temperatures along the coast of northern Peru. In this work, we document the impacts of this phenomenon on the artisanal fisheries and the scallop aquaculture sector, both of which represent important socio-economic activities for the province of Sechura. Despite the perceived absence of effective disaster management and rehabilitation policies, resource users opted for a wide range of different adaptation strategies and are currently striving towards recovery. One year after the event, the artisanal fisheries fleet has returned to operating almost on a normal scale, while the aquaculture sector is still drastically impacted, with many people continuing to work in different economic sectors and even in other regions of the country. Recovery of the social-ecological system of Sechura likely depends on the occurrence of scallop seed and the financial capacity of small-scale producers to reinitiate scallop cultures. Long-term consequences of this coastal El Niño are yet to be studied, though the need to develop trans-local and trans-sectoral management strategies for coping with disturbance events of this scale is emphasized.

scholarly journals On the structure of the self-sustaining cycle in separating and reattaching flows

2018 ◽  
Vol 857 ◽  
pp. 907-936 ◽  
Author(s):  
A. Cimarelli ◽  
A. Leonforte ◽  
D. Angeli
Keyword(s):  
Shear Layer ◽  
Rectangular Plate ◽  
Large Scale ◽  
Reverse Flow ◽  
Leading Edge ◽  
Streamwise Velocity ◽  
The Self ◽  
Small Scale ◽  
Spectral Evolution ◽  
Mean Velocity

The separating and reattaching flows and the wake of a finite rectangular plate are studied by means of direct numerical simulation data. The large amount of information provided by the numerical approach is exploited here to address the multi-scale features of the flow and to assess the self-sustaining mechanisms that form the basis of the main unsteadinesses of the flows. We first analyse the statistically dominant flow structures by means of three-dimensional spatial correlation functions. The developed flow is found to be statistically dominated by quasi-streamwise vortices and streamwise velocity streaks as a result of flow motions induced by hairpin-like structures. On the other hand, the reverse flow within the separated region is found to be characterized by spanwise vortices. We then study the spectral properties of the flow. Given the strongly inhomogeneous nature of the flow, the spectral analysis has been conducted along two selected streamtraces of the mean velocity field. This approach allows us to study the spectral evolution of the flow along its paths. Two well-separated characteristic scales are identified in the near-wall reverse flow and in the leading-edge shear layer. The first is recognized to represent trains of small-scale structures triggering the leading-edge shear layer, whereas the second is found to be related to a very large-scale phenomenon that embraces the entire flow field. A picture of the self-sustaining mechanisms of the flow is then derived. It is shown that very-large-scale fluctuations of the pressure field alternate between promoting and suppressing the reverse flow within the separation region. Driven by these large-scale dynamics, packages of small-scale motions trigger the leading-edge shear layers, which in turn created them, alternating in the top and bottom sides of the rectangular plate with a relatively long period of inversion, thus closing the self-sustaining cycle.

Sting-free measurements on a magnetically supported right circular cylinder aligned with the free stream

2008 ◽  
Vol 596 ◽  
pp. 49-72 ◽  
Author(s):  
HIROSHI HIGUCHI ◽  
HIDEO SAWADA ◽  
HIROYUKI KATO
Keyword(s):  
Circular Cylinder ◽  
Shear Layer ◽  
Free Stream ◽  
Aerodynamic Force ◽  
Cross Flow ◽  
Leading Edge ◽  
Magnetic Suspension ◽  
Recirculation Region ◽  
Mean Velocity ◽  
Wide Range

The flow over cylinders of varying fineness ratio (length to diameter) aligned with the free stream was examined using a magnetic suspension and balance system in order to avoid model support interference. The drag coefficient variation of a right circular cylinder was obtained for a wide range of fineness ratios. Particle image velocimetry (PIV) was used to examine the flow field, particularly the behaviour of the leading-edge separation shear layer and its effect on the wake. Reynolds numbers based on the cylinder diameter ranged from 5×104 to 1.1×105, while the major portion of the experiment was conducted at ReD=1.0×105. For moderately large fineness ratio, the shear layer reattaches with subsequent growth of the boundary layer, whereas over shorter cylinders, the shear layer remains detached. Differences in the wake recirculation region and the immediate wake patterns are clarified in terms of both the mean velocity and turbulent flow fields, including longitudinal vortical structures in the cross-flow plane of the wake. The minimum drag corresponded to the fineness ratio for which the separated shear layer reattached at the trailing edge of the cylinder. The base pressure was obtained with a telemetry technique. Pressure fields and aerodynamic force fluctuations are also discussed.

Passive Manipulation of Separation-Bubble Transition Using Surface Modifications

2009 ◽  
Vol 131 (2) ◽  
Author(s):  
Brian R. McAuliffe ◽  
Metin I. Yaras
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Shear Layer ◽  
Separation Bubble ◽  
Surface Modifications ◽  
Small Scale ◽  
Two Dimensional ◽  
Vortex Pairing ◽  
Separated Shear Layer ◽  
Scale Turbulence

Through experiments using two-dimensional particle-image velocimetry (PIV), this paper examines the nature of transition in a separation bubble and manipulations of the resultant breakdown to turbulence through passive means of control. An airfoil was used that provides minimal variation in the separation location over a wide operating range, with various two-dimensional modifications made to the surface for the purpose of manipulating the transition process. The study was conducted under low-freestream-turbulence conditions over a flow Reynolds number range of 28,000–101,000 based on airfoil chord. The spatial nature of the measurements has allowed identification of the dominant flow structures associated with transition in the separated shear layer and the manipulations introduced by the surface modifications. The Kelvin–Helmholtz (K-H) instability is identified as the dominant transition mechanism in the separated shear layer, leading to the roll-up of spanwise vorticity and subsequent breakdown into small-scale turbulence. Similarities with planar free-shear layers are noted, including the frequency of maximum amplification rate for the K-H instability and the vortex-pairing phenomenon initiated by a subharmonic instability. In some cases, secondary pairing events are observed and result in a laminar intervortex region consisting of freestream fluid entrained toward the surface due to the strong circulation of the large-scale vortices. Results of the surface-modification study show that different physical mechanisms can be manipulated to affect the separation, transition, and reattachment processes over the airfoil. These manipulations are also shown to affect the boundary-layer losses observed downstream of reattachment, with all surface-indentation configurations providing decreased losses at the three lowest Reynolds numbers and three of the five configurations providing decreased losses at the highest Reynolds number. The primary mechanisms that provide these manipulations include: suppression of the vortex-pairing phenomenon, which reduces both the shear-layer thickness and the levels of small-scale turbulence; the promotion of smaller-scale turbulence, resulting from the disturbances generated upstream of separation, which provides quicker transition and shorter separation bubbles; the elimination of the separation bubble with transition occurring in an attached boundary layer; and physical disturbance, downstream of separation, of the growing instability waves to manipulate the vortical structures and cause quicker reattachment.

scholarly journals Inventory of Galaxy Properties in Small Scale Structures

2000 ◽  
Vol 174 ◽  
pp. 116-120
Author(s):  
L. Tanvuia ◽  
B. Kelm ◽  
P. Focardi ◽  
R. Rampazzo ◽  
W. W. Zeilinger
Keyword(s):  
Star Formation ◽  
Spectroscopic Study ◽  
Small Groups ◽  
Spectral Properties ◽  
Broad Band ◽  
Small Scale ◽  
Low Density ◽  
Wide Range ◽  
Scale Structures ◽  
Small Scale Structures

AbstractWe report on a broad-band R surface photometric and low resolution spectroscopic study of a set of galaxies located in small groups and pairs of galaxies considered to be in low density environment. Groups span a wide range in density and show different morphological mix. We are analyzing systemic velocities, photometric parameters and spectral properties of the dominant galaxies in the groups. Our aim is to investigate the connection between interaction and induced galaxy activity, from star formation to AGN activity.

On the modulating effect of three-dimensional instabilities in open cavity flows

2014 ◽  
Vol 759 ◽  
pp. 546-578 ◽  
Author(s):  
J. Basley ◽  
L. R. Pastur ◽  
F. Lusseyran ◽  
J. Soria ◽  
N. Delprat
Keyword(s):  
Shear Layer ◽  
Travelling Waves ◽  
Broad Band ◽  
Three Dimensional ◽  
High Energy ◽  
Open Cavity ◽  
Coupling Mechanism ◽  
Cavity Flows ◽  
Low Frequencies ◽  
Sustained Oscillations

AbstractOpen cavity flows are known to select and enhance locked-on modes or tones. High-energy self-sustained oscillations arise within the shear layer, impinging onto the trailing edge of the cavity. These self-sustained oscillations are subject to amplitude modulations (AMs) at multiple low frequencies. However, only a few studies have addressed the identification of the lowest modulating frequencies. The present work brings to light salient AMs of the shear layer waves and identifies their source as three-dimensional dynamics existing inside the cavity. Indeed, the recirculating inner flow gives rise to centrifugal instabilities, which entail broad-band frequencies down two orders of magnitude lower than those of the self-sustained oscillations. Using time-resolved PIV (TRPIV) in two planes, the nonlinearly saturated dynamics is analysed in both space and time by means of proper orthogonal decomposition, global Fourier decomposition and Hilbert–Huang transforms. The inner flow can be decomposed as three-dimensional waves carried by the main recirculation. Bicoherence distributions are computed to highlight the nonlinear interactions between these spanwise-travelling waves inside the cavity and the locked-on modes. The modulated envelope of the shear layer oscillations is extracted and investigated with regards to the inner-flow dynamics. Strong cross-correlations, in time rather than in space, reveal a global coupling mechanism, possibly related to the beating of the spanwise-travelling waves.

Experimental and Numerical Investigation of the Unsteady Flow Field in a Vaned Diffuser of a High-Speed Centrifugal Compressor

2015 ◽  
Vol 137 (7) ◽  
Author(s):  
Klemens Vogel ◽  
Reza S. Abhari ◽  
Armin Zemp
Keyword(s):  
Centrifugal Compressor ◽  
High Speed ◽  
Pressure Fluctuations ◽  
Leading Edge ◽  
Fast Response ◽  
Operating Conditions ◽  
Wake Flow ◽  
Vaned Diffuser ◽  
Wide Range ◽  
The Impact

Vaned diffusers in centrifugal compressor stages are used to achieve higher stage pressure ratios, higher stage efficiencies, and more compact designs. The interaction of the stationary diffuser with the impeller can lead to resonant vibration with potentially devastating effects. This paper presents unsteady diffuser vane surface pressure measurements using in-house developed, flush mounted, fast response piezoresistive pressure transducers. The unsteady pressures were recorded for nine operating conditions, covering a wide range of the compressor map. Experimental work was complemented by 3D unsteady computational fluid dynamics (CFD) simulations using ansys cfx V12.1 to detail the unsteady diffuser aerodynamics. Pressure fluctuations of up to 34.4% of the inlet pressure were found. High pressure variations are present all along the vane and are not restricted to the leading edge region. Frequency analysis of the measured vane surface pressures show that reduced impeller loading, and the corresponding reduction of tip leakage fluid changes the characteristics of the fluctuations from a main blade count to a total blade count. The unsteady pressure fluctuations in the diffuser originate from three distinct locations. The impact of the jet-wake flow leaving the impeller results in high variation close to the leading edge. It was observed that CFD results overpredicted the amplitude of the pressure fluctuation on average by 62%.

Sinusoidal forcing of a turbulent separation bubble

1997 ◽  
Vol 342 ◽  
pp. 119-139 ◽  
Author(s):  
M. KIYA ◽  
M. SHIMIZU ◽  
O. MOCHIZUKI
Keyword(s):  
Shear Layer ◽  
Separation Bubble ◽  
Leading Edge ◽  
High Amplitude ◽  
Single Frequency ◽  
Reattachment Length ◽  
Mean Flow ◽  
Double Frequency ◽  
Separated Shear Layer ◽  
Turbulent Separation

A turbulent separation bubble is forced by single- and double-frequency sinusoidal disturbances, with the emphasis placed on the reattachment length as a function of the forcing amplitude and frequency. The separation bubble is that formed along the side of a blunt circular cylinder with a square leading edge. In single-frequency forcing, the reattachment length attains a minimum at a particular forcing frequency, F, which scales with the frequency of shedding of vortices from the reattachment region of the separated shear layer. A flow model is presented to interpret the frequency F. Forcing of sufficiently high amplitude eliminates the recirculating region in a range of the forcing frequency. Flow visualization and a survey of the mean flow and turbulence properties demonstrate how the flow in the separated shear layer is modified by the forcing. In double-frequency forcing, the superposition of the F-component on its higher or subharmonic components is considered. A non-resonant combination of the two frequencies is also considered.

Sign in / Sign up

Export Citation Format

Share Document