scholarly journals Does Animal Personality Affect Movement in Habitat Corridors? Experiments with Common Voles (Microtus arvalis) Using Different Corridor Widths

Animals ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 291 ◽  
Author(s):  
Gabriele Joanna Kowalski ◽  
Volker Grimm ◽  
Antje Herde ◽  
Anja Guenther ◽  
Jana A. Eccard
Keyword(s):  
Tracking System ◽  
Movement Patterns ◽  
Animal Personality ◽  
Very High Frequency ◽  
Behavioral Traits ◽  
Site Characteristics ◽  
Habitat Corridors ◽  
Personality Score ◽  
Common Voles ◽  
Very High

Animal personality may affect an animal’s mobility in a given landscape, influencing its propensity to take risks in an unknown environment. We investigated the mobility of translocated common voles in two corridor systems 60 m in length and differing in width (1 m and 3 m). Voles were behaviorally phenotyped in repeated open field and barrier tests. Observed behavioral traits were highly repeatable and described by a continuous personality score. Subsequently, animals were tracked via an automated very high frequency (VHF) telemetry radio tracking system to monitor their movement patterns in the corridor system. Although personality did not explain movement patterns, corridor width determined the amount of time spent in the habitat corridor. Voles in the narrow corridor system entered the corridor faster and spent less time in the corridor than animals in the wide corridor. Thus, landscape features seem to affect movement patterns more strongly than personality. Meanwhile, site characteristics, such as corridor width, could prove to be highly important when designing corridors for conservation, with narrow corridors facilitating faster movement through landscapes than wider corridors.

scholarly journals Employing Very High Frequency (VHF) Radio Telemetry to Recreate Monarch Butterfly Flight Paths

2020 ◽  
Vol 49 (2) ◽  
pp. 312-323 ◽  
Author(s):  
Kelsey E Fisher ◽  
James S Adelman ◽  
Steven P Bradbury
Keyword(s):  
High Frequency ◽  
Radio Telemetry ◽  
Danaus Plexippus ◽  
Movement Patterns ◽  
Agricultural Landscapes ◽  
Breeding Habitat ◽  
Stationary Points ◽  
Very High Frequency ◽  
Monarch Butterflies ◽  
Very High

Abstract The overwintering population of eastern North American monarch butterflies (Danaus plexippus) has declined significantly. Loss of milkweed (Asclepias sp.), the monarch’s obligate host plant in the Midwest United States, is considered to be a major cause of the decline. Restoring breeding habitat is an actionable step towards population recovery. Monarch butterflies are highly vagile; therefore, the spatial arrangement of milkweed in the landscape influences movement patterns, habitat utilization, and reproductive output. Empirical studies of female movement patterns within and between habitat patches in representative agricultural landscapes support recommendations for habitat restoration. To track monarch movement at distances beyond human visual range, we employed very high frequency radio telemetry with handheld antennae to collect movement bearings on a biologically relevant time scale. Attachment of 220–300 mg transmitters did not significantly affect behavior and flight capability. Thirteen radio-tagged monarchs were released in a restored prairie, and locations were estimated every minute for up to 39 min by simultaneous triangulation from four operators. Monarchs that left the prairie were tracked and relocated at distances up to 250 m. Assuming straight flights between locations, the majority of steps within the prairie were below 50 m. Steps associated with exiting the prairie exceeded 50 m with high directionality. Because butterflies do not fly in straight lines between stationary points, we also illustrate how occurrence models can use location data obtained through radio telemetry to estimate movement within a prairie and over multiple land cover types.

Experimental Investigation of very High Frequency Slot Antenna on M-60A-1 Tank

1977 ◽  
Author(s):  
D. V. Campbell ◽  
William Kennebeck ◽  
A. Zanella ◽  
Paul Sexton
Keyword(s):  
Experimental Investigation ◽  
High Frequency ◽  
Slot Antenna ◽  
Very High Frequency ◽  
Very High

Evaluation of the mechanical properties of Inconel 718 to SCM 440 dissimilar friction welding through real-time monitoring of the acoustic emission system

2021 ◽  
pp. 146442072199383
Author(s):  
Yu Sik Kong ◽  
Muralimohan Cheepu ◽  
Jin-Kyung Lee
Keyword(s):  
Acoustic Emission ◽  
Friction Welding ◽  
Inconel 718 ◽  
Low Voltage ◽  
Dissimilar Materials ◽  
Average Frequency ◽  
Very High Frequency ◽  
Cumulative Count ◽  
Emission System ◽  
Very High

Friction welding was chosen for its versatility in the joining of dissimilar materials with high quality. The aim of this study is to determine the optimal welding conditions for attaining quality joints by using online monitoring of acoustic emission system signals. During friction welding, the formation of cracks, defects, or any abnormalities in the joining process which have a detrimental effect on the joints quality was identified. The most widely used materials in the aerospace industry—Inconel 718 and molybdenum steel—were joined by friction welding. The precision of the joints, internal defects, and quality are major concerns for aerospace parts. The results of the present research determined the optimal welding conditions for high tensile strength by nondestructively inducing acoustic emission signals. During friction time and upset time periods, the typical waveforms and frequency spectrum of the acoustic emission signals were recorded, and their energy level, average frequency, cumulative count, and amplitude were analyzed. Both cumulative count and amplitude were found to be useful parameters for deriving the optimal welding conditions. In the initial stage of friction welding, a very high voltage of continuous form was generated with frequency characteristics of 0.44 MHz and 0.54 MHz. The signals generated during the upset stage had a low voltage, but a very high frequency of 1.56 MHz and 1.74 MHz with a burst-type signal. The amplitude of the signal generated for the optimally welded joints was about 100 dB at the friction time and about 45 dB at the upset time.

A collision feedback based multiple access control protocol for very high frequency data exchange system in E-navigation

2021 ◽  
pp. 1-16
Author(s):  
Xu Hu ◽  
Bin Lin ◽  
Ping Wang ◽  
Hongguang Lyu ◽  
Tie-Shan Li
Keyword(s):  
Access Control ◽  
High Frequency ◽  
Multiple Access ◽  
Data Exchange ◽  
High Frequency Data ◽  
Frequency Data ◽  
Exchange System ◽  
Very High Frequency ◽  
Time Division ◽  
Very High

Abstract The very high frequency data exchange system (VDES) is promising in promoting electronic navigation (E-navigation) and improving navigation safety. The multiple access control (MAC) protocol is crucial to the transmission performance of VDES. The self-organising time division multiple access (SOTDMA) protocol, as the only access mode given by current recommendations, leads to a high rate of transmission collisions in the traditional automatic identification system (AIS), especially with heavy traffic loads. This paper proposes a novel feedback based time division multiple access (FBTDMA) protocol to address the problems caused by SOTDMA, such that collision of transmissions can be avoided in information transmission among vessels. Simulation results demonstrate that the proposed FBTDMA outperforms the traditional SOTDMA in terms of channel utilisation and throughput, and significantly reduces the transmission collision rate. The study is expected to provide insights into VDES standardisation and E-navigation modernisation.

scholarly journals Measurement of Electrical Properties of Superconducting YBCO Thin Films in the VHF Range

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3360
Author(s):  
Yakir Dahan ◽  
Eldad Holdengreber ◽  
Elichai Glassner ◽  
Oz Sorkin ◽  
Shmuel E. Schacham ◽  
...  
Keyword(s):  
Thin Films ◽  
Theoretical Model ◽  
Quality Factor ◽  
High Frequency ◽  
Unit Length ◽  
Superconducting Thin Films ◽  
Electrical Parameters ◽  
Very High Frequency ◽  
Production Constraints ◽  
Very High

A new measurement technique of electrical parameters of superconducting thin films at the Very High Frequency (VHF) range is described, based on resonators with microstrip (MS) structures. The design of an optimal resonator was achieved, based on a thorough theoretical analysis, which is required for derivation of the exact configuration of the MS. A theoretical model is presented, from which an expression for the attenuation of a MS line can be derived. Accordingly, simulations were performed, and an optimal resonator for the VHF range was designed and implemented. Production constraints of YBa2Cu3O7 (YBCO) limited the diameter of the sapphire substrate to 3″. Therefore, a meander configuration was formed to fit the long λ/4 MS line on the wafer. By measuring the complex input reflection coefficients of a λ/4 resonator, we extracted the quality factor, which is mainly affected by the dielectric and conductor attenuations. The experimental results are well fitted by the theoretical model. The dielectric attenuation was calculated using the quasi-static analysis of the MS line. An identical copper resonator was produced and measured to compare the properties of the YBCO resonator in reference to the copper one. A quality factor of ~6·105 was calculated for the YBCO resonator, three orders of magnitude larger than that of the copper resonator. The attenuation per unit length of the YBCO layer was smaller by more than five orders of magnitude than that of the copper.

Da eine oder mehrere betroffen …

2020 ◽  
Vol 48 (1) ◽  
pp. 47-100
Author(s):  
Melitta Gillmann
Keyword(s):  
High Frequency ◽  
Formal Language ◽  
Subordinate Clause ◽  
Matrix Clause ◽  
Very High Frequency ◽  
Corpus Study ◽  
Causal Relations ◽  
Legal Texts ◽  
The Matrix ◽  
Very High

AbstractBased on a corpus study conducted using the GerManC corpus (1650–1800), the paper sketches the functional and sociosymbolic development of subordinate clause constructions introduced by the subjunctor da ‘since’ in different text genres. In the second half of the 17th and the first half of the 18th century, the da clauses were characterized by semantic vagueness: Besides temporal, spatial and causal relations, the subjunctor established conditional, concessive, and adversative links between clauses. The corpus study reveals that different genres are crucial to the readings of da clauses. Spatial and temporal usages, for example, occur more often in sermons than in other genres. The conditional reading, in contrast, strongly tends to occur in legal texts, where it displays very high frequency. This could be the reason why da clauses carry indexical meaning in contemporary German and are associated with formal language. Over the course of the 18th century, the causal usages increase in all genres. Surprisingly, these causal da clauses tend to be placed in front of the matrix clause despite the overall tendency of causal clauses to follow the matrix clause.

scholarly journals Sintering, Microstructure, and Dielectric Properties of Copper Borates for High Frequency LTCC Applications

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4017
Author(s):  
Dorota Szwagierczak ◽  
Beata Synkiewicz-Musialska ◽  
Jan Kulawik ◽  
Norbert Pałka
Keyword(s):  
Dielectric Properties ◽  
Dielectric Permittivity ◽  
High Frequency ◽  
Ceramic Materials ◽  
Sintering Behavior ◽  
Terahertz Time Domain Spectroscopy ◽  
Very High Frequency ◽  
X Ray ◽  
Low Dielectric ◽  
Very High

New ceramic materials based on two copper borates, CuB2O4 and Cu3B2O6, were prepared via solid state synthesis and sintering, and characterized as promising candidates for low dielectric permittivity substrates for very high frequency circuits. The sintering behavior, composition, microstructure, and dielectric properties of the ceramics were investigated using a heating microscope, X-ray diffractometry, scanning electron microscopy, energy dispersive spectroscopy, and terahertz time domain spectroscopy. The studies revealed a low dielectric permittivity of 5.1–6.7 and low dielectric loss in the frequency range 0.14–0.7 THz. The copper borate-based materials, owing to a low sintering temperature of 900–960 °C, are suitable for LTCC (low temperature cofired ceramics) applications.

Sign in / Sign up

Export Citation Format

Share Document