scholarly journals Investigation of Hydraulic Fracturing Crack Propagation Behavior in Multi-Layered Coal Seams

2020 ◽  
Vol 10 (3) ◽  
pp. 1153 ◽  
Author(s):  
Shirong Cao ◽  
Xiyuan Li ◽  
Zhe Zhou ◽  
Yingwei Wang ◽  
Hong Ding
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Crack Propagation ◽  
Principal Stress ◽  
Fracture Propagation ◽  
Clean Energy ◽  
Burial Depth ◽  
Coal Seams ◽  
Initiation Pressure ◽  
Dip Angle

Coalbed methane is not only a clean energy source, but also a major problem affecting the efficient production of coal mines. Hydraulic fracturing is an effective technology for enhancing the coal seam permeability to achieve the efficient extraction of methane. This study investigated the effect of a coal seam reservoir’s geological factors on the initiation pressure and fracture propagation. Through theoretical analysis, a multi-layered coal seam initiation pressure calculation model was established based on the broken failure criterion of maximum tensile stress theory. Laboratory experiments were carried out to investigate the effects of the coal seam stress and coal seam dip angle on the crack initiation pressure and fracture propagation. The results reveal that the multi-layered coal seam hydraulic fracturing initiation pressure did not change with the coal seam inclination when the burial depth was the same. When the dip angle was the same, the initiation pressure linearly increased with the reservoir depth. A three-dimensional model was established to simulate the actual hydraulic fracturing crack propagation in multi-layered coal seams. The results reveal that the hydraulic crack propagated along the direction of the maximum principal stress and opened in the direction of the minimum principal stress. As the burial depth of the reservoir increased, the width of the hydraulic crack also increased. This study can provide the theoretical foundation for the effective implementation of hydraulic fracturing in multi-layered coal seams.

scholarly journals Study on Reservoir Properties and Critical Depth in Deep Coal Seams in Qinshui Basin, China

2019 ◽  
Vol 2019 ◽  
pp. 1-7
Author(s):  
Guiqiang Zheng ◽  
Bin Sun ◽  
Dawei Lv ◽  
Zhejun Pan ◽  
Huiqing Lian
Keyword(s):  
Coal Seam ◽  
Step Change ◽  
Gas Content ◽  
Burial Depth ◽  
Critical Depth ◽  
Coal Seams ◽  
Reservoir Properties ◽  
Qinshui Basin ◽  
Geological Conditions ◽  
Change Characteristics

Coalbed methane (CBM) reservoir properties and relationship of properties with burial depth were studied based on the data derived from 204 deep CBM production wells in Qinshui Basin, China. Through the study, it is found that permeability and porosity decrease with the increase of burial depth and the decreasing trend shows step-change characteristics at a critical burial depth. They also show divisional characteristics at certain burial depth. Gas content, geostress, and geotemperature increase with the increase of burial depth, and the increasing trend shows step-change characteristics and also have divisional characteristics at certain burial depth. Based on the previous study on the reservoir property changes with burial depth, three series of critical depth using different parameters are obtained through simulating the critical depth using the BP neural network method. It is found that the critical depth is different when using different parameters. Combined the previous study with the normalization of three different parameter types, the critical depth in Qinshui Basin was defined as shallow coal seam is lower than 650 m and transition band is 650–1000 m, while deep coal seam is deeper than 1000 m. In deep coal seams, the geological conditions and recovery becomes poor, so it can be defined as unfavorable zones. Therefore, other development means, for example, CO2 injection, need to be used to accelerate the deep coal methane development.

scholarly journals Fully Coupled Multi-Scale Model for Gas Extraction from Coal Seam Stimulated by Directional Hydraulic Fracturing

2019 ◽  
Vol 9 (21) ◽  
pp. 4720 ◽  
Author(s):  
Ge ◽  
Zhang ◽  
Sun ◽  
Hu
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Scale Model ◽  
Gas Extraction ◽  
Coal Seams ◽  
Directional Hydraulic Fracturing ◽  
Coal Mine Methane ◽  
Multi Scale ◽  
Fully Coupled

Although numerous studies have tried to explain the mechanism of directional hydraulic fracturing in a coal seam, few of them have been conducted on gas migration stimulated by directional hydraulic fracturing during coal mine methane extraction. In this study, a fully coupled multi-scale model to stimulate gas extraction from a coal seam stimulated by directional hydraulic fracturing was developed and calculated by a finite element approach. The model considers gas flow and heat transfer within the hydraulic fractures, the coal matrix, and cleat system, and it accounts for coal deformation. The model was verified using gas amount data from the NO.8 coal seam at Fengchun mine, Chongqing, Southwest China. Model simulation results show that slots and hydraulic fracture can expand the area of gas pressure drop and decrease the time needed to complete the extraction. The evolution of hydraulic fracture apertures and permeability in coal seams is greatly influenced by the effective stress and coal matrix deformation. A series of sensitivity analyses were performed to investigate the impacts of key factors on gas extraction time of completion. The study shows that hydraulic fracture aperture and the cleat permeability of coal seams play crucial roles in gas extraction from a coal seam stimulated by directional hydraulic fracturing. In addition, the reasonable arrangement of directional boreholes could improve the gas extraction efficiency. A large coal seam dip angle and high temperature help to enhance coal mine methane extraction from the coal seam.

scholarly journals Field Investigation of Hydraulic Fracturing in Coal Seams and Its Enhancement for Methane Extraction in the Southeast Sichuan Basin, China

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3451 ◽  
Author(s):  
Zuxun Zhang ◽  
Hongtu Wang ◽  
Bozhi Deng ◽  
Minghui Li ◽  
Dongming Zhang
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Sichuan Basin ◽  
High Stress ◽  
Fluid Pressure ◽  
Field Investigation ◽  
Stress Sensitivity ◽  
Extraction Rate ◽  
Coal Seams ◽  
Methane Extraction

Hydraulic fracturing is an effective technology for enhancing the extraction of reservoir methane, as proved by field experience and laboratory experiments. However, unlike conventional reservoirs, coal seams had high stress sensitivity and high anisotropy. Therefore, the efficiency of hydraulic fracturing in coal seams needs to be investigated. In this study, hydraulic fracturing was performed at Nantong mine in the southeast Sichuan basin, China. The field investigation indicated that the hydraulic fracturing could significantly enhance the methane extraction rate of boreholes ten times higher than that of normal boreholes in one of the minable coal seams (named #5 coal seam). The performance of hydraulic fracturing in three districts revealed that compared with south flank, the fluid pressure was higher and the injection rate was lower in north flank. The methane extraction rate of south flank was inferior to that of north flank. It indicated hydraulic fracturing had less effect on #5 coal seam in south flank. Moreover, the injection of high-pressure water in coal seams could also drive methane away from boreholes. The methane extraction rate of the test boreholes demonstrated the existence of methane enrichment circles after hydraulic fracturing. It indicated that hydraulic fracturing did act on #5 coal seam in south flank. However, due to the high stress sensitivity of coal seams and the high geo-stress of south flank, the induced artificial fractures in #5 coal seam might close with the decline of the fluid pressure that led to a sharp decline of the methane extraction rate.

scholarly journals Stability Analysis and Derived Control Measures for Rock Surrounding a Roadway in a Lower Coal Seam under Concentrated Stress of a Coal Pillar

2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Zhuoyue Sun ◽  
Yongzheng Wu ◽  
Zhiguo Lu ◽  
Youliang Feng ◽  
Xiaowei Chu ◽  
...  
Keyword(s):  
Coal Seam ◽  
Numerical Simulations ◽  
Principal Stress ◽  
Coal Pillar ◽  
Control Measures ◽  
Stress Difference ◽  
Coal Seams ◽  
The Stability ◽  
Close Distance ◽  
Close Distance Coal Seams

Numerical simulations have often been used in close-distance coal seam studies. However, numerical simulations can contain certain subjective and objective limitations, such as high randomness and excessively simplified models. In this study, close-distance coal seams were mechanically modeled based on the half-plane theory. An analytical solution of the floor stress distribution was derived and visualized using Mathematica software. The principal stress difference was regarded as a stability criterion for the rock surrounding the roadway. Then, the evolution laws of the floor principal stress difference under different factors that influence stability were further examined. Finally, stability control measures for the rock surrounding the roadway in the lower coal seam were proposed. The results indicated the following: (1) The principal stress difference of the floor considers the centerline of the upper coal pillar as a symmetry axis and transmits radially downward. The principal stress difference in the rock surrounding the roadway gradually decreases as the distance from the upper coal pillar increases and can be ranked in the following order: left rib > roof > right rib. (2) The minimum principal stress difference zones are located at the center of the left and right “spirals,” which are obliquely below the edge of the upper coal pillar. This is an ideal position for the lower coal seam roadway. (3) The shallowness of the roadway, a small stress concentration coefficient, high level of coal cohesion, large coal internal friction angle, and appropriate lengthening of the working face of the upper coal seam are conducive to the stability of the lower coal seam roadway. (4) Through bolt (cable) support, borehole pressure relief, and pregrouting measures, the roof-to-floor and rib-to-rib convergence of the 13313 return airway is significantly reduced, and the stability of the rock surrounding the roadway is substantially improved. This research provides a theoretical basis and field experience for stabilizing the lower coal seam roadways in close-distance coal seams.

scholarly journals Nitrogen Injection To Flush Coal Seam Gas Out Of Coal: An Experimental Study

2015 ◽  
Vol 60 (4) ◽  
pp. 1013-1028 ◽  
Author(s):  
Lei Zhang ◽  
Naj Aziz ◽  
Ting Ren ◽  
Jan Nemcik ◽  
Shihao Tu
Keyword(s):  
Coal Seam ◽  
Clean Energy ◽  
Gas Content ◽  
Coal Seams ◽  
Coal Seam Gas ◽  
Gas Recovery ◽  
Nitrogen Injection ◽  
Gas Desorption ◽  
Effective Role ◽  
Study Laboratory

Abstract Several mines operating in the Bulli seam of the Sydney Basin in NSW, Australia are experiencing difficulties in reducing gas content within the available drainage lead time in various sections of the coal deposit. Increased density of drainage boreholes has proven to be ineffective, particularly in sections of the coal seam rich in CO2. Plus with the increasing worldwide concern on green house gas reduction and clean energy utilisation, significant attention is paid to develop a more practical and economical method of enhancing the gas recovery from coal seams. A technology based on N2 injection was proposed to flush the Coal Seam Gas (CSG) out of coal and enhance the gas drainage process. In this study, laboratory tests on CO2 and CH4 gas recovery from coal by N2 injection are described and results show that N2 flushing has a significant impact on the CO2 and CH4 desorption and removal from coal. During the flushing stage, it was found that N2 flushing plays a more effective role in reducing adsorbed CH4 than CO2. Comparatively, during the desorption stage, the study shows gas desorption after N2 flushing plays a more effective role in reducing adsorbed CO2 than CH4.

scholarly journals Hydraulic Fracture Propagation and Permeability Evolution in the Composite Thin Coal Seam

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Shenglong Liu ◽  
Bingxiang Huang ◽  
Weiyong Lu ◽  
Haoze Li ◽  
Ding Li ◽  
...  
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Water Pressure ◽  
Fracture Propagation ◽  
Injection Pressure ◽  
Unstable Fracture ◽  
Permeability Evolution ◽  
Thin Coal Seam ◽  
Hf Propagation

Hydraulic fracturing can improve the permeability of composite thin coal seam. Recently, characterizing hydraulic fracture (HF) propagation inside the coal seam and evaluating the permeability enhancement with HF extension remain challenging and crucial. In this work, based on the geological characteristics of the coal seam in a coal mine of the southwest China, the RFPA2D-Flow software is employed to simulate the HF propagation and its permeability-increasing effect in the composite thin coal seam, and a couple of outcomes were obtained. (1) Continuous propagation of the hydraulic microcrack-band is the prominent characteristic of HF propagation. With the increment of the injection-water pressure, HF generation in the composite thin coal seam can be divided into three stages: stress accumulation, stable fracture propagation, and unstable fracture propagation. (2) The hydraulic microcrack-band propagates continuously driven by the fluid-injection pressure. The microcrack-band not only cracks the coal seam but also fractures the gangue sandwiched between the coal seams. (3) The permeability in the composite thin coal seam increases significantly with the propagation of hydraulic microcrack-band. The permeability increases by 1~2 magnitudes after hydraulic fracturing. This study provides references to the field applications of hydraulic fracturing in the composite thin coal seam, such as optimizing hydraulic fracturing parameters, improving gas drainage, and safe-efficient mining.

scholarly journals The Calculation Model of Initiation Pressure During Hydraulic Fracturing Process of Perforated Coal Seams

2013 ◽  
Vol 6 (1) ◽  
pp. 30-35 ◽  
Author(s):  
Li Yuwei ◽  
Ai Chi
Keyword(s):  
Hydraulic Fracturing ◽  
Pressure Gauge ◽  
Calculation Model ◽  
Tensile Failure ◽  
Coal Seams ◽  
Rock Body ◽  
Fracture Pressure ◽  
Fracturing Process ◽  
Pressure Calculation ◽  
Initiation Pressure

There are lots of cleats, fractures and many other structure weak planes in coal seams, which make the bullet holes and cleats intersecting. During the hydraulic fracturing process in coal seams, fractures will initiate at coal rock body of borehole wall, and cleats or fractures are different from conventional reservoirs. Thus a new model for initiation pressure calculation during coal seams fracturing should be established. Based on the rock mechanics and elasticity mechanics, and also on network distribution characteristics of coal seam cleats and the space position relationships between the intersected bullet holes and cleats, stress distribution around the bullet holes and at the cleats wall were deducted. The model was established in tensile failure condition. The calculated initiation fracture pressure of Well HX-3 was 10.71MPa. The pressure obtained from bottom hole pressure gauge was 11.24MPa. The relative error was 4.72%. The model could be applied for initiation pressure calculation during hydraulic fracturing process in coal seams. The fractures would initiate at the cleats during fracturing.

scholarly journals Case studies of comprehensive gas control method during fully mechanized caving of low permeability ultra-thick coal seams

2020 ◽  
Author(s):  
Bangyou Jiang ◽  
Shitan Gu ◽  
Yunliang Tan ◽  
Guangchao Zhang ◽  
Jihua Zhang
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
High Efficiency ◽  
Control Method ◽  
Measurement Data ◽  
Low Permeability ◽  
Coal Seams ◽  
Gas Concentration ◽  
High Position ◽  
Gas Control

Abstract Slicing fully mechanized caving mining now is a common high-efficiency mining method for ultra-thick coal seams. However, effective gas control has remained a difficulty in fully mechanized top-coal caving mining of low permeability ultra-thick coal seams. This study focused on mining of the #9-15 coal in Liuhuanggou Coal Mine, Xinjiang Province, China, and combined theoretical analyses and field test results for exploring comprehensive gas control methods for fully mechanized caving of low permeability ultra-thick coal seams. The No. (9-15)06 panel is a top slicing panel of the #9-15 coal with a mining height of 9 m, and the No. (4-5)02 goaf is located on the top of the panel. Through analysis, gas emissions in the No. (9-15)06 panel were mainly sourced from the coal wall, caving of top coal, goaf, and neighboring coal seams. A comprehensive gas control method based on source separation was proposed, which combined gas pre-drainage along the coal seam, high-position drilling on the top, pre-burial of pipes in the goaf, and pressure-balancing ventilation. Considering the poor gas pre-drainage effect for low permeability coal seams, the permeability of the coal seam was enhanced using hydraulic fracturing. According to coal seam and crustal stress distribution characteristics, the arrangement of the boreholes and backward segmented fracturing technology were designed. Field data show that coal underwent remarkable pre-fracturing under hydraulic fracturing. Mean gas pre-drainage from the boreholes was enhanced by nearly 4 times compared to the pre-hydraulic fracturing state. Finally, using the proposed comprehensive control method based on the gas sources, field tests were performed in the No. (9-15)06 panel. Field measurement data demonstrate that gas concentration in the return airflow fluctuated within a range of 0.05%~0.35%, i.e., gas concentration did not exceed the standard. The proposed gas control method can provide insightful reference for the other similar projects.

scholarly journals Case Studies of Comprehensive Gas Control Method during Fully Mechanized Caving of Low-Permeability Ultrathick Coal Seams

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-14
Author(s):  
Bangyou Jiang ◽  
Shitan Gu ◽  
Wenshuai Li ◽  
Guangchao Zhang ◽  
Jihua Zhang
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
High Efficiency ◽  
Control Method ◽  
Field Tests ◽  
Gas Analysis ◽  
Low Permeability ◽  
Coal Seams ◽  
High Position ◽  
Gas Control

Slicing fully mechanized caving mining is a standard high-efficiency mining method for ultrathick coal seams. However, the effectiveness of gas control has accentuated the difficulty in fully mechanized top coal caving of low-permeability ultrathick coal seams. This study focused on mining the No. 9-15 coal in Liuhuanggou Coal Mine, Xinjiang Province, China. To this aim, the results of theoretical analyses and field tests were combined to explore a comprehensive gas control method for fully mechanized caving of low-permeability ultrathick coal seams. The No. (9-15)06 panel was a top-slicing panel of the No. 9-15 coal with a mining height of 9 m. Gas analysis results revealed that gas emissions in the No. (9-15)06 panel are mainly sourced from the coal wall, caving top coal, goaf, and neighboring coal seams. Based on gas source separation, a comprehensive gas control method was proposed. The proposed method was based on the combination of gas predrainage alongside the coal seam, high-position drilling on the top, preburial of pipes in the goaf, and pressure-balancing ventilation. The permeability and gas predrainage were enhanced by hydraulic fracturing in low-permeability coal seams. According to the characterizations of coal seam and crustal stress distribution, the arrangement of the boreholes and backward-segmented fracturing technology were designed. From the field results, the coal seam presented a remarkable prefracturing under hydraulic fracturing. Besides, the mean gas predrainage from the boreholes was enhanced by four times compared to the prehydraulic fracturing state. Finally, using the proposed comprehensive control method based on the gas sources, field tests were performed in the No. (9-15)06 panel. The measured results demonstrated that gas concentration in the return airflow is fluctuated within a range of 0.05% to 0.35%. The proposed gas control method can provide an insightful reference for other similar projects.

scholarly journals Investigation on the CBM Extraction Techniques in the Broken-Soft and Low-Permeability Coal Seams in Zhaozhuang Coalmine

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-9
Author(s):  
Zhaoying Chen ◽  
Xuehai Fu ◽  
Guofu Li ◽  
Jian Shen ◽  
Qingling Tian ◽  
...  
Keyword(s):  
Coal Seam ◽  
Hydraulic Fracturing ◽  
Coalbed Methane ◽  
Research Result ◽  
Horizontal Stress ◽  
Gas Production ◽  
Vertical Stress ◽  
Low Permeability ◽  
Coal Seams

To enhance the coalbed methane (CBM) extraction in broken-soft coal seams, a method of drilling a horizontal well along the roof to hydraulically fracture the coal seam is studied (i.e., HWR-HFC method). We first tested the physical and mechanical properties of the broken-soft and low-permeability (BSLP) coal resourced from Zhaozhuang coalmine. Afterward, the in situ hydraulic fracturing test was conducted in the No. 3 coal seam of Zhaozhuang coalmine. The results show that (1) the top part of the coal seam is fractured coal, and the bottom is fragmented-mylonitic coal with a firmness coefficient value of less than 1.0. (2) In the hydraulic fracturing test of the layered rock-coal specimens in laboratory, the through-type vertical fractures are usually formed if the applied vertical stress is the maximum principal stress and is greater than 4 MPa compared with the maximum horizontal stress. However, horizontal fractures always developed when horizontal stress is the maximum or it is less than 4 MPa compared with vertical stress. (3) The in situ HWR-HFC hydraulic fracturing tests show that the detected maximum daily gas production is 11,000 m3, and the average gas production is about 7000 m3 per day. This implies that the CBM extraction using this method is increased by 50%~100% compared with traditional hydraulic fracturing in BSLP coal seams. The research result could give an indication of CBM developing in the broken-soft and low-permeability coal seams.

Sign in / Sign up

Export Citation Format

Share Document