scholarly journals Energy Consumption Analysis of Beamforming and Cooperative Schemes for Aircraft Wireless Sensor Networks

2020 ◽  
Vol 10 (12) ◽  
pp. 4374
Author(s):  
Seung-Hwan Kim ◽  
Jae-Woo Kim ◽  
Dong-Seong Kim
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Channel Model ◽  
Path Loss ◽  
Wireless Sensor ◽  
Amplify And Forward ◽  
Decode And Forward ◽  
International Telecommunication Union ◽  
Better Than

In this paper, the eight schemes for aircraft wireless sensor networks are investigated, which are single-hop array beamforming schemes (including analog beamforming (ABF), and digital beamforming (DBF)), non-cooperative schemes (including single-hop and multi-hop schemes), cooperative schemes (including amplify and forward (AF), decode and forward (DF)), and incremental cooperative schemes (incremental decode and forward (IDF), and incremental amplify and forward (IAF)). To set up the aircraft wireless communication environment, we design the aircraft channel model by referring to the experimental parameters of the ITU (International Telecommunication Union)-R M.2283, which is composed of path loss, shadowing fading, and multi-path fading channel responses. To evaluate the performance, the conditions energy consumption and throughput analysis are performed. Through simulation results, the incremental cooperative scheme outperformed by 66.8% better at spectral efficiency 2 than the DBF scheme in terms of the energy consumption metric. Whereas, in terms of throughput metric, overall SNR (signal-to-noise ratio) ranged from −20 to 30 dB the beamforming scheme had the best performance in which the beamforming scheme at SNR 0 dB achieved 85.4% better than the multi-hop scheme. Finally, in terms of normalized throughput metric in low SNR range between −20 and 1 dB the ABF scheme had the best performance over the others in which the ABF at SNR 0 dB achieved 75.4% better than the multi-hop scheme. Whereas, in high SNR range between 2 and 30 dB the IDF scheme had the best performance in which the IDF at SNR 10 dB achieved 62.2% better than the multi-hop scheme.

An Energy-Balance Based Distributed Topology Control Algorithm for Wireless Sensor Networks

2012 ◽  
Vol 490-495 ◽  
pp. 1392-1396 ◽  
Author(s):  
Chu Hang Wang
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Topology Control ◽  
Control Algorithm ◽  
Path Loss ◽  
Network Connectivity ◽  
Premature Death ◽  
Residual Energy ◽  
Wireless Sensor

Topology control is an efficient approach which can reduce energy consumption for wireless sensor networks, and the current algorithms mostly focus on reducing the nodes’ energy consumption by power adjusting, but pay little attention to balance energy consumption of the whole network, which results in premature death of many nodes. Thus, a distributed topology control algorithm based on path-loss and residual energy (PRTC) is designed in this paper. This algorithm not only maintains the least loss links between nodes but also balances the energy consumption of the network. The simulation results show that the topology constructed by PRTC can preserve network connectivity as well as extend the lifetime of the network and provide good performance of energy consumption.

scholarly journals Balanced Transmissions Based Trajectories of Mobile Sink in Homogeneous Wireless Sensor Networks

2017 ◽  
Vol 2017 ◽  
pp. 1-16 ◽  
Author(s):  
Mariam Akbar ◽  
Nadeem Javaid ◽  
Wadood Abdul ◽  
Sanaa Ghouzali ◽  
Abid Khan ◽  
...  
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Performance Metrics ◽  
Geometric Model ◽  
Data Gathering ◽  
Path Loss ◽  
Mobile Sink ◽  
Wireless Sensor ◽  
Network Nodes ◽  
Better Than

Mobile Sink (MS) based routing strategies have been widely investigated to prolong the lifetime of Wireless Sensor Networks (WSNs). In this paper, we propose two schemes for data gathering in WSNs: (i) MS moves on random paths in the network (RMS) and (ii) the trajectory of MS is defined (DMS). In both the schemes, the network field is logically divided into small squares. The center point of each partitioned area is the sojourn location of the MS. We present three linear programming based models: (i) to maximize network lifetime, (ii) to minimize path loss, and (iii) to minimize end to end delay. Moreover, a geometric model is proposed to avoid redundancy while collecting information from the network nodes. Simulation results show that our proposed schemes perform better than the selected existing schemes in terms of the selected performance metrics.

scholarly journals New method for route efficient energy calculations with mobile-sink for wireless sensor networks

2022 ◽  
Vol 25 (1) ◽  
pp. 365
Author(s):  
Mohammad Khalaf Rahim Al-juaifari ◽  
Jammel Mohammed Ali Mohammed Mona ◽  
Zainab Abd Abbas
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Movement Time ◽  
Path Loss ◽  
Life Time ◽  
Mobile Sink ◽  
Previous Method ◽  
Wireless Sensor ◽  
Proposed Model

<p>Despite proposing a number of algorithms and protocols, especially those related to routing, for the purpose of reducing energy consumption in wireless sensor networks, which is one of the most important issues facing this type of network. In this research paper, energy consumption and cost are calculated taking into account energy consumption and the amount of data transferred to a thousand nodes through specific paths towards the mobile sink. The proposed model simulated by sending various amounts of data with specific path to know the energy consumption of each track and the network life time with 250, 500, and 1000 bits. Cost calculated using various weight for each track of these paths and the coefficient of movement time and path loss factor and others related to the transmission and receiving circuits. And finally, the results compared with a previous method it showed the efficiency of our method used and calculating 1000 nodes with various amount of bits to show the experimental results. Deep learning used to remember each and every path of each position or nearby to avoid calculation cost later.</p>

scholarly journals Evaluation and Analysis for Maximum Lifespan of Wireless Sensor Networks by Energy-Efficient Design

2021 ◽  
Vol 9 (4) ◽  
pp. 01-05
Author(s):  
Ms.Tejashri H. Mohite, Prof. Dr. Noorullah Shariff
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Environmental Parameters ◽  
Sensor Nodes ◽  
Relay Network ◽  
Wireless Sensor ◽  
Communication Link ◽  
Environment Monitoring ◽  
Amplify And Forward ◽  
Decode And Forward

Wireless Sensor Networks (WSNs) have used worldwide in the past few years and are now being used in health monitoring ,disaster management, defense, telecommunications, etc. Such networks are used in many industrial and consumer applications such as industrial process and environment monitoring, among others. A WSN network is a collection of specialized transducers known as sensor nodes with a communication link distributed randomly in any locations to monitor environmental parameters such as water level, and temperature. Each sensor node is equipped with a transducer, a signal processor, a power unit, and a transceiver. WSNs are now being widely used to monitor environmental parameters, including the amount of gas, water, temperature, humidity, oxygen level, dust, etc. The WSN for environment monitoring can be equivalently replaced by a multiple-input multiple-output (MIMO) relay network. Multi-hop relay networks have attracted significant research interest in recent years for their capability in increasing the coverage range. The network communication link from a source to a destination is implemented using the amplify-and-forward (AF) or decode-and-forward (DF) schemes. The AF relay receives information from the previous relay and simply amplifies the received signal and then forwards it to the next relay. On the other hand, the DF relay first decodes the received signal and then forwards it to the next relay in the second stage if it can perfectly decode the incoming signal. For analytical simplicity, in this thesis, we consider the AF relaying scheme and the results of this work can also be developed for the DF relay.

A Semantic-Based Routing Algorithm for Hierarchical WSNs

2014 ◽  
Vol 568-570 ◽  
pp. 514-518
Author(s):  
Zi Ping Du ◽  
Jian Feng Jiang
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Routing Algorithm ◽  
Wireless Sensor ◽  
Data Packets ◽  
Redundant Data ◽  
Backbone Structure ◽  
Reduce Energy Consumption ◽  
Better Than

Wireless sensor networks have the characteristics of taking the data as the center, focusing on the functions and having no backbone structure. In this paper, a data-forwarding algorithm based on semantic-based routing is proposed, which is aiming at improving the routing efficiency and increasing the lifetime of the networks. First, we defined the semantics of networks, and constructed the expression architecture for semantics of wireless sensor networks. Then we used these semantics to compose data packets. Finally, we matched the semantics from the packets of networks, which determined the direction of packets forwarding. Experimental results show that the algorithm performed better than DD and LEACH. It can reduce energy consumption, redundant data and prolong the networks' lifetime.

scholarly journals A Self-Organized and Smart-Adaptive Clustering and Routing Approach for Wireless Sensor Networks

2012 ◽  
Vol 8 (1) ◽  
pp. 156268 ◽  
Author(s):  
Kyuhong Lee ◽  
Heesang Lee
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Critical Factor ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Adaptive Clustering ◽  
Self Organized ◽  
Fitness Value ◽  
Better Than

Efficient energy consumption is a critical factor for the deployment and operation of wireless sensor networks (WSNs). In general, WSNs perform clustering and routing using localized neighbor information only. Therefore, some studies have used self-organized systems and smart mechanisms as research methods. In this paper, we propose a self-organized and smart-adaptive clustering (SOSAC) and routing method, which performs clustering in WSNs, operates the formed clusters in a smart-adaptive way, and performs cluster-based routing. SOSAC is comprised of three mechanisms, which are used to change the fitness value over time, to back up routing information in preparation for any potential breakdown in WSNs, and to adapt to the changes of the number of sensor nodes for a WSN. We compared the performance of the proposed SOSAC with that of a well-known clustering and routing protocol for WSNs. Our computational experiments demonstrate that the network lifetime, energy consumption, and scalability of SOSAC are better than those of the compared method.

scholarly journals Nonuniform Grid-Based Coordinated Routing in Wireless Sensor Networks

2009 ◽  
Vol 2009 ◽  
pp. 1-11 ◽  
Author(s):  
Robert Akl ◽  
Priyanka Kadiyala ◽  
Mohamad Haidar
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Path Loss ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Nonuniform Grid ◽  
Uniform Grids ◽  
Grid Based

A nonuniform grid-based coordinated routing design in wireless sensor networks is presented. The conditions leading to network partition and analysis of energy consumption that prolongs the network lifetime are studied. We focus on implementing routing in densely populated sensor networks. By maintaining constant values for parameters such as path loss exponent, receiver sensitivity and transmit power, and varying between uniform and non-uniform grids, we observe energy consumption patterns for each of the grid structures and infer from the network lifetime the better suited grids for uniformly and randomly deployed sensor nodes.

QoS Aware Multi-hop Multi-path Routing Approach in Wireless Sensor Networks

2019 ◽  
Vol 9 (1) ◽  
pp. 43-52
Author(s):  
Omkar Singh ◽  
Vinay Rishiwal
Keyword(s):  
Wireless Sensor Networks ◽  
Energy Consumption ◽  
Sensor Networks ◽  
Network Lifetime ◽  
Life Time ◽  
Base Station ◽  
Environmental Data ◽  
Wireless Sensor ◽  
Delivery Ratio ◽  
End To End

Background & Objective: Wireless Sensor Network (WSN) consist of huge number of tiny senor nodes. WSN collects environmental data and sends to the base station through multi-hop wireless communication. QoS is the salient aspect in wireless sensor networks that satisfies end-to-end QoS requirement on different parameters such as energy, network lifetime, packets delivery ratio and delay. Among them Energy consumption is the most important and challenging factor in WSN, since the senor nodes are made by battery reserved that tends towards life time of sensor networks. Methods: In this work an Improve-Energy Aware Multi-hop Multi-path Hierarchy (I-EAMMH) QoS based routing approach has been proposed and evaluated that reduces energy consumption and delivers data packets within time by selecting optimum cost path among discovered routes which extends network life time. Results and Conclusion: Simulation has been done in MATLAB on varying number of rounds 400- 2000 to checked the performance of proposed approach. I-EAMMH is compared with existing routing protocols namely EAMMH and LEACH and performs better in terms of end-to-end-delay, packet delivery ratio, as well as reduces the energy consumption 13%-19% and prolongs network lifetime 9%- 14%.

Sign in / Sign up

Export Citation Format

Share Document