scholarly journals Non-Contact SpO2 Prediction System Based on a Digital Camera

2021 ◽  
Vol 11 (9) ◽  
pp. 4255
Author(s):  
Ali Al-Naji ◽  
Ghaidaa A. Khalid ◽  
Jinan F. Mahdi ◽  
Javaan Chahl
Keyword(s):  
Digital Camera ◽  
Cost Effective ◽  
Ensemble Empirical Mode Decomposition ◽  
Physical Contact ◽  
Blood Oxygen Saturation ◽  
Mode Decomposition ◽  
Error Ratio ◽  
The Subject ◽  
Pulse Oximeters ◽  
Good Agreement

Patients with the COVID-19 condition require frequent and accurate blood oxygen saturation (SpO2) monitoring. The existing pulse oximeters, however, require contact-based measurement using clips or otherwise fixed sensor units or need dedicated hardware which may cause inconvenience and involve additional appointments with the patient. This study proposes a computer vision-based system using a digital camera to measure SpO2 on the basis of the imaging photoplethysmography (iPPG) signal extracted from the human’s forehead without the need for restricting the subject or physical contact. The proposed camera-based system decomposes the iPPG obtained from the red and green channels into different signals with different frequencies using a signal decomposition technique based on a complete Ensemble Empirical Mode Decomposition (EEMD) technique and Independent Component Analysis (ICA) technique to obtain the optical properties from these wavelengths and frequency channels. The proposed system is convenient, contactless, safe and cost-effective. The preliminary results for 70 videos obtained from 14 subjects of different ages and with different skin tones showed that the red and green wavelengths could be used to estimate SpO2 with good agreement and low error ratio compared to the gold standard of pulse oximetry (SA210) with a fixed measurement position.

scholarly journals Short-Range Vital Signs Sensing Based on EEMD and CWT Using IR-UWB Radar

2016 ◽  
Author(s):  
Xikun Hu ◽  
Tian Jin
Keyword(s):  
Short Range ◽  
Doppler Radar ◽  
Vital Signs ◽  
Ensemble Empirical Mode Decomposition ◽  
The Body ◽  
Ultra Wideband ◽  
Detection Range ◽  
Wall Movement ◽  
Mode Decomposition ◽  
The Subject

The designed radar sensor realizes the healthcare monitoring capable of short-range to detect the chest-wall movement of the subject caused by cardiopulmonary activities, and wirelessly estimating the distance from the sensor to the subject without any devices being attached to the body. Ensemble empirical mode decomposition (EEMD) based denoise method and 1-D continuous-wavelet transform (CWT) are applied for improving on the detection SNR so that accurate respiration rate and heartbeat rate can be acquired in time domain or frequency domain with further distance. No choosing the conventional Doppler radar only able to capture the Doppler signatures due to the lack of bandwidth information as noncontact sensor, we take full advantages of ultra-wideband (UWB) impulse radar to make it low power consumed and portable conveniently, with flexible detection range and preferable accuracy. This noncontact healthcare sensor system addressed proves the commercial feasibility and vast availability of using compact impulse radar for emerging biomedical applications. Compared with traditional contact measurement devices, experimental results utilizing the 2.3 GHz bandwidth transceiver, demonstrate 100% similar results.

scholarly journals Estimating Heart Rate and Respiratory Rate from a Single Lead Electrocardiogram Using Ensemble Empirical Mode Decomposition and Spectral Data Fusion

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1184
Author(s):  
Iau-Quen Chung ◽  
Jen-Te Yu ◽  
Wei-Chi Hu
Keyword(s):  
Heart Rate ◽  
Data Fusion ◽  
Respiratory Rate ◽  
Spectral Data ◽  
Empirical Mode Decomposition ◽  
Cost Effective ◽  
Absolute Error ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition

Cardiopulmonary monitoring is important and useful for diagnosing and managing multiple conditions, such as stress and sleep disorders. Wearable ambulatory systems can provide continuous, comfortable, and inexpensive means for monitoring; it always has been a research subject in recent years. Being simple and cost-effective, electrocardiogram-based commercial products can be found in the market that provides cardiac diagnostic information for assessment, including heart rate measurement and atrial fibrillation identification. Based on a data-driven and self-adaptive approach, this study aims to estimate heart rate and respiratory rate simultaneously from one lead electrocardiogram signal. In contrast to ensemble empirical mode decomposition with principle component analysis, performed in the time domain, our method uses spectral data fusion, together with intrinsic mode functions using ensemble empirical mode decomposition obtains a more accurate heart rate and respiratory rate. Equipped with a rule-based selection of defined frequency levels for respiratory rate (RR) estimation, the proposed method obtains (0.92, 1.32) beat per minute for the heart rate and (2.20, 2.92) breath per minute for the respiratory rate as their mean absolute error and root mean square error, respectively outperforming other existing methods.

scholarly journals Analysis method of the cavitation vibration signals in poppet valve based on EEMD

2021 ◽  
Vol 13 (2) ◽  
pp. 168781402199811
Author(s):  
Beibei Li ◽  
Qiao Zhao ◽  
Huaiyi Li ◽  
Xiumei Liu ◽  
Jichao Ma ◽  
...  
Keyword(s):  
Ensemble Empirical Mode Decomposition ◽  
Center Frequency ◽  
Analysis Method ◽  
Vibration Signals ◽  
Poppet Valve ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Cavitation Intensity ◽  
Eemd Method ◽  
Peak Value

To study the vibration characteristics of the poppet valve induced by cavitation, the signal analysis method based on the ensemble empirical mode decomposition (EEMD) method was studied experimentally. The component induced by cavitation was separated from the vibration signals through the EEMD method. The results show that the IMF2 component has the largest amplitude and energy of all components. The root mean square (RMS) value, peak value of marginal spectrum, and center frequency of marginal spectrum of the IMF2 component were studied in detail. The RMS value and the peak value of the marginal spectrum decrease with a decrease of cavitation intensity. The center frequency of marginal spectrum is between 12 kHz and 20 kHz, and the center frequency first increases and then decreases with a decrease of cavitation intensity. The change rate of the center frequency also decreases with an increase of inlet pressure.

scholarly journals Bearing Fault Classification Using Ensemble Empirical Mode Decomposition and Convolutional Neural Network

Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1248
Author(s):  
Rafia Nishat Toma ◽  
Cheol-Hong Kim ◽  
Jong-Myon Kim
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Empirical Mode Decomposition ◽  
Vibration Signal ◽  
Ensemble Empirical Mode Decomposition ◽  
Fault Classification ◽  
Original Signal ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Reconstructed Signal

Condition monitoring is used to track the unavoidable phases of rolling element bearings in an induction motor (IM) to ensure reliable operation in domestic and industrial machinery. The convolutional neural network (CNN) has been used as an effective tool to recognize and classify multiple rolling bearing faults in recent times. Due to the nonlinear and nonstationary nature of vibration signals, it is quite difficult to achieve high classification accuracy when directly using the original signal as the input of a convolution neural network. To evaluate the fault characteristics, ensemble empirical mode decomposition (EEMD) is implemented to decompose the signal into multiple intrinsic mode functions (IMFs) in this work. Then, based on the kurtosis value, insignificant IMFs are filtered out and the original signal is reconstructed with the rest of the IMFs so that the reconstructed signal contains the fault characteristics. After that, the 1-D reconstructed vibration signal is converted into a 2-D image using a continuous wavelet transform with information from the damage frequency band. This also transfers the signal into a time-frequency domain and reduces the nonstationary effects of the vibration signal. Finally, the generated images of various fault conditions, which possess a discriminative pattern relative to the types of faults, are used to train an appropriate CNN model. Additionally, with the reconstructed signal, two different methods are used to create an image to compare with our proposed image creation approach. The vibration signal is collected from a self-designed testbed containing multiple bearings of different fault conditions. Two other conventional CNN architectures are compared with our proposed model. Based on the results obtained, it can be concluded that the image generated with fault signatures not only accurately classifies multiple faults with CNN but can also be considered as a reliable and stable method for the diagnosis of fault bearings.

scholarly journals A Hydraulic Pump Fault Diagnosis Method Based on the Modified Ensemble Empirical Mode Decomposition and Wavelet Kernel Extreme Learning Machine Methods

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2599
Author(s):  
Zhenbao Li ◽  
Wanlu Jiang ◽  
Sheng Zhang ◽  
Yu Sun ◽  
Shuqing Zhang
Keyword(s):  
Fault Diagnosis ◽  
Extreme Learning Machine ◽  
Recognition Accuracy ◽  
Ensemble Empirical Mode Decomposition ◽  
Hydraulic Pump ◽  
Vibration Signals ◽  
Mode Decomposition ◽  
Diagnosis Method ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine

To address the problem that the faults in axial piston pumps are complex and difficult to effectively diagnose, an integrated hydraulic pump fault diagnosis method based on the modified ensemble empirical mode decomposition (MEEMD), autoregressive (AR) spectrum energy, and wavelet kernel extreme learning machine (WKELM) methods is presented in this paper. First, the non-linear and non-stationary hydraulic pump vibration signals are decomposed into several intrinsic mode function (IMF) components by the MEEMD method. Next, AR spectrum analysis is performed for each IMF component, in order to extract the AR spectrum energy of each component as fault characteristics. Then, a hydraulic pump fault diagnosis model based on WKELM is built, in order to extract the features and diagnose faults of hydraulic pump vibration signals, for which the recognition accuracy reached 100%. Finally, the fault diagnosis effect of the hydraulic pump fault diagnosis method proposed in this paper is compared with BP neural network, support vector machine (SVM), and extreme learning machine (ELM) methods. The hydraulic pump fault diagnosis method presented in this paper can diagnose faults of single slipper wear, single slipper loosing and center spring wear type with 100% accuracy, and the fault diagnosis time is only 0.002 s. The results demonstrate that the integrated hydraulic pump fault diagnosis method based on MEEMD, AR spectrum, and WKELM methods has higher fault recognition accuracy and faster speed than existing alternatives.

scholarly journals Short-Term Electricity Price Forecasting by Employing Ensemble Empirical Mode Decomposition and Extreme Learning Machine

Forecasting ◽  
2021 ◽  
Vol 3 (3) ◽  
pp. 460-477
Author(s):  
Sajjad Khan ◽  
Shahzad Aslam ◽  
Iqra Mustafa ◽  
Sheraz Aslam
Keyword(s):  
Extreme Learning Machine ◽  
Empirical Mode Decomposition ◽  
Electricity Market ◽  
Ensemble Empirical Mode Decomposition ◽  
Electricity Price ◽  
Price Forecasting ◽  
Short Term ◽  
Mode Decomposition ◽  
Electricity Price Forecasting ◽  
Learning Machine

Day-ahead electricity price forecasting plays a critical role in balancing energy consumption and generation, optimizing the decisions of electricity market participants, formulating energy trading strategies, and dispatching independent system operators. Despite the fact that much research on price forecasting has been published in recent years, it remains a difficult task because of the challenging nature of electricity prices that includes seasonality, sharp fluctuations in price, and high volatility. This study presents a three-stage short-term electricity price forecasting model by employing ensemble empirical mode decomposition (EEMD) and extreme learning machine (ELM). In the proposed model, the EEMD is employed to decompose the actual price signals to overcome the non-linear and non-stationary components in the electricity price data. Then, a day-ahead forecasting is performed using the ELM model. We conduct several experiments on real-time data obtained from three different states of the electricity market in Australia, i.e., Queensland, New South Wales, and Victoria. We also implement various deep learning approaches as benchmark methods, i.e., recurrent neural network, multi-layer perception, support vector machine, and ELM. In order to affirm the performance of our proposed and benchmark approaches, this study performs several performance evaluation metric, including the Diebold–Mariano (DM) test. The results from the experiments show the productiveness of our developed model (in terms of higher accuracy) over its counterparts.

scholarly journals Multivariate empirical mode decomposition–based structural damage localization using limited sensors

2021 ◽  
pp. 107754632110069
Author(s):  
Sandeep Sony ◽  
Ayan Sadhu
Keyword(s):  
Empirical Mode Decomposition ◽  
Structural Damage ◽  
Cost Effective ◽  
Threshold Value ◽  
Damage Localization ◽  
Time Frequency ◽  
Multivariate Empirical Mode Decomposition ◽  
Percentage Difference ◽  
Mode Decomposition

In this article, multivariate empirical mode decomposition is proposed for damage localization in structures using limited measurements. Multivariate empirical mode decomposition is first used to decompose the acceleration responses into their mono-component modal responses. The major contributing modal responses are then used to evaluate the modal energy for the respective modes. A damage localization feature is proposed by calculating the percentage difference in the modal energies of damaged and undamaged structures, followed by the determination of the threshold value of the feature. The feature of the specific sensor location exceeding the threshold value is finally used to identify the location of structural damage. The proposed method is validated using a suite of numerical and full-scale studies. The validation is further explored using various limited measurement cases for evaluating the feasibility of using a fewer number of sensors to enable cost-effective structural health monitoring. The results show the capability of the proposed method in identifying as minimal as 2% change in global modal parameters of structures, outperforming the existing time–frequency methods to delineate such minor global damage.

Sign in / Sign up

Export Citation Format

Share Document