scholarly journals Enhanced Convolutional-Neural-Network Architecture for Crop Classification

2021 ◽  
Vol 11 (9) ◽  
pp. 4292
Author(s):  
Mónica Y. Moreno-Revelo ◽  
Lorena Guachi-Guachi ◽  
Juan Bernardo Gómez-Mendoza ◽  
Javier Revelo-Fuelagán ◽  
Diego H. Peluffo-Ordóñez
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Network Architecture ◽  
Classification Model ◽  
Classification Error ◽  
Small Scale ◽  
Post Processing ◽  
Average Accuracy ◽  
Processing Step ◽  
Crop Classification

Automatic crop identification and monitoring is a key element in enhancing food production processes as well as diminishing the related environmental impact. Although several efficient deep learning techniques have emerged in the field of multispectral imagery analysis, the crop classification problem still needs more accurate solutions. This work introduces a competitive methodology for crop classification from multispectral satellite imagery mainly using an enhanced 2D convolutional neural network (2D-CNN) designed at a smaller-scale architecture, as well as a novel post-processing step. The proposed methodology contains four steps: image stacking, patch extraction, classification model design (based on a 2D-CNN architecture), and post-processing. First, the images are stacked to increase the number of features. Second, the input images are split into patches and fed into the 2D-CNN model. Then, the 2D-CNN model is constructed within a small-scale framework, and properly trained to recognize 10 different types of crops. Finally, a post-processing step is performed in order to reduce the classification error caused by lower-spatial-resolution images. Experiments were carried over the so-named Campo Verde database, which consists of a set of satellite images captured by Landsat and Sentinel satellites from the municipality of Campo Verde, Brazil. In contrast to the maximum accuracy values reached by remarkable works reported in the literature (amounting to an overall accuracy of about 81%, a f1 score of 75.89%, and average accuracy of 73.35%), the proposed methodology achieves a competitive overall accuracy of 81.20%, a f1 score of 75.89%, and an average accuracy of 88.72% when classifying 10 different crops, while ensuring an adequate trade-off between the number of multiply-accumulate operations (MACs) and accuracy. Furthermore, given its ability to effectively classify patches from two image sequences, this methodology may result appealing for other real-world applications, such as the classification of urban materials.

scholarly journals A Pilot Study of Diabetes Mellitus Classification from rs-fMRI Data Using Convolutional Neural Networks

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Yunfei Liu ◽  
Xian Mo ◽  
Hao Yang ◽  
Yan Liu ◽  
Junran Zhang
Keyword(s):  
Neural Network ◽  
Diabetes Mellitus ◽  
Convolutional Neural Network ◽  
Network Architecture ◽  
Early Stage ◽  
Low Frequency ◽  
Classification Model ◽  
Fmri Data ◽  
Learning Abilities ◽  
Chronic Progressive Disease

Background. As a chronic progressive disease, diabetes mellitus (DM) has a high incidence worldwide, and it impacts on cognitive and learning abilities in the lifetime even in the early stage, may degenerate memory in middle age, and perhaps increases the risk of Alzheimer’s disease. Method. In this work, we propose a convolutional neural network (CNN) based classification method to help classify diabetes by distinguishing the brains with abnormal functions from the normal ones on resting-state functional magnetic resonance imaging (rs-fMRI). The proposed classification model is based on the Inception-v4-Residual convolutional neural network architecture. In our workflow, the original rs-fMRI data are first mapped to generate amplitude of low-frequency fluctuation (ALFF) images and then fed into the CNN model to get the classification result to indicate the potential existence of DM. Result. We validate our method on a realistic clinical rs-fMRI dataset, and the achieved average accuracy is 89.95 % in fivefold cross-validation. Our model achieves a 0.8690 AUC with 77.50% and 77.51% sensitivity and specificity using our local dataset, respectively. Conclusion. It has the potential to become a novel clinical preliminary screening tool that provides help for the classification of different categories based on functional brain alteration caused by diabetes, benefiting from its accuracy and robustness, as well as efficiency and patient friendliness.

Non-Blind Image Deconvolution Based on “Ringing” Removal Using Convolutional Neural Network

2020 ◽  
Vol 2020 (10) ◽  
pp. 181-1-181-7
Author(s):  
Takahiro Kudo ◽  
Takanori Fujisawa ◽  
Takuro Yamaguchi ◽  
Masaaki Ikehara
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Network Architecture ◽  
Large Scale ◽  
Blind Deconvolution ◽  
Training Dataset ◽  
Image Deconvolution ◽  
Classic Problem ◽  
Key Points ◽  
Blind Image

Image deconvolution has been an important issue recently. It has two kinds of approaches: non-blind and blind. Non-blind deconvolution is a classic problem of image deblurring, which assumes that the PSF is known and does not change universally in space. Recently, Convolutional Neural Network (CNN) has been used for non-blind deconvolution. Though CNNs can deal with complex changes for unknown images, some CNN-based conventional methods can only handle small PSFs and does not consider the use of large PSFs in the real world. In this paper we propose a non-blind deconvolution framework based on a CNN that can remove large scale ringing in a deblurred image. Our method has three key points. The first is that our network architecture is able to preserve both large and small features in the image. The second is that the training dataset is created to preserve the details. The third is that we extend the images to minimize the effects of large ringing on the image borders. In our experiments, we used three kinds of large PSFs and were able to observe high-precision results from our method both quantitatively and qualitatively.

scholarly journals Effectiveness of transfer learning for enhancing tumor classification with a convolutional neural network on frozen sections

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Young-Gon Kim ◽  
Sungchul Kim ◽  
Cristina Eunbee Cho ◽  
In Hye Song ◽  
Hee Jin Lee ◽  
...  
Keyword(s):  
Neural Network ◽  
Deep Learning ◽  
Convolutional Neural Network ◽  
Transfer Learning ◽  
Frozen Section ◽  
Medical Center ◽  
External Validation ◽  
Model Performance ◽  
Classification Model ◽  
Training Dataset

AbstractFast and accurate confirmation of metastasis on the frozen tissue section of intraoperative sentinel lymph node biopsy is an essential tool for critical surgical decisions. However, accurate diagnosis by pathologists is difficult within the time limitations. Training a robust and accurate deep learning model is also difficult owing to the limited number of frozen datasets with high quality labels. To overcome these issues, we validated the effectiveness of transfer learning from CAMELYON16 to improve performance of the convolutional neural network (CNN)-based classification model on our frozen dataset (N = 297) from Asan Medical Center (AMC). Among the 297 whole slide images (WSIs), 157 and 40 WSIs were used to train deep learning models with different dataset ratios at 2, 4, 8, 20, 40, and 100%. The remaining, i.e., 100 WSIs, were used to validate model performance in terms of patch- and slide-level classification. An additional 228 WSIs from Seoul National University Bundang Hospital (SNUBH) were used as an external validation. Three initial weights, i.e., scratch-based (random initialization), ImageNet-based, and CAMELYON16-based models were used to validate their effectiveness in external validation. In the patch-level classification results on the AMC dataset, CAMELYON16-based models trained with a small dataset (up to 40%, i.e., 62 WSIs) showed a significantly higher area under the curve (AUC) of 0.929 than those of the scratch- and ImageNet-based models at 0.897 and 0.919, respectively, while CAMELYON16-based and ImageNet-based models trained with 100% of the training dataset showed comparable AUCs at 0.944 and 0.943, respectively. For the external validation, CAMELYON16-based models showed higher AUCs than those of the scratch- and ImageNet-based models. Model performance for slide feasibility of the transfer learning to enhance model performance was validated in the case of frozen section datasets with limited numbers.

scholarly journals Real Time Multipurpose Smart Waste Classification Model for Efficient Recycling in Smart Cities Using Multilayer Convolutional Neural Network and Perceptron

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4916
Author(s):  
Ali Usman Gondal ◽  
Muhammad Imran Sadiq ◽  
Tariq Ali ◽  
Muhammad Irfan ◽  
Ahmad Shaf ◽  
...  
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Real Time ◽  
Multilayer Perceptron ◽  
Smart Cities ◽  
Classification Model ◽  
Rapid Urbanization ◽  
Metal Waste ◽  
Waste Classification ◽  
The City

Urbanization is a big concern for both developed and developing countries in recent years. People shift themselves and their families to urban areas for the sake of better education and a modern lifestyle. Due to rapid urbanization, cities are facing huge challenges, one of which is waste management, as the volume of waste is directly proportional to the people living in the city. The municipalities and the city administrations use the traditional wastage classification techniques which are manual, very slow, inefficient and costly. Therefore, automatic waste classification and management is essential for the cities that are being urbanized for the better recycling of waste. Better recycling of waste gives the opportunity to reduce the amount of waste sent to landfills by reducing the need to collect new raw material. In this paper, the idea of a real-time smart waste classification model is presented that uses a hybrid approach to classify waste into various classes. Two machine learning models, a multilayer perceptron and multilayer convolutional neural network (ML-CNN), are implemented. The multilayer perceptron is used to provide binary classification, i.e., metal or non-metal waste, and the CNN identifies the class of non-metal waste. A camera is placed in front of the waste conveyor belt, which takes a picture of the waste and classifies it. Upon successful classification, an automatic hand hammer is used to push the waste into the assigned labeled bucket. Experiments were carried out in a real-time environment with image segmentation. The training, testing, and validation accuracy of the purposed model was 0.99% under different training batches with different input features.

scholarly journals Classification of Skin Disease Using Deep Learning Neural Networks with MobileNet V2 and LSTM

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2852
Author(s):  
Parvathaneni Naga Srinivasu ◽  
Jalluri Gnana SivaSai ◽  
Muhammad Fazal Ijaz ◽  
Akash Kumar Bhoi ◽  
Wonjoon Kim ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Deep Learning ◽  
Convolutional Neural Network ◽  
Skin Disease ◽  
Network Architecture ◽  
Large Scale ◽  
Short Term Memory ◽  
Convolutional Networks ◽  
Occurrence Matrix

Deep learning models are efficient in learning the features that assist in understanding complex patterns precisely. This study proposed a computerized process of classifying skin disease through deep learning based MobileNet V2 and Long Short Term Memory (LSTM). The MobileNet V2 model proved to be efficient with a better accuracy that can work on lightweight computational devices. The proposed model is efficient in maintaining stateful information for precise predictions. A grey-level co-occurrence matrix is used for assessing the progress of diseased growth. The performance has been compared against other state-of-the-art models such as Fine-Tuned Neural Networks (FTNN), Convolutional Neural Network (CNN), Very Deep Convolutional Networks for Large-Scale Image Recognition developed by Visual Geometry Group (VGG), and convolutional neural network architecture that expanded with few changes. The HAM10000 dataset is used and the proposed method has outperformed other methods with more than 85% accuracy. Its robustness in recognizing the affected region much faster with almost 2× lesser computations than the conventional MobileNet model results in minimal computational efforts. Furthermore, a mobile application is designed for instant and proper action. It helps the patient and dermatologists identify the type of disease from the affected region’s image at the initial stage of the skin disease. These findings suggest that the proposed system can help general practitioners efficiently and effectively diagnose skin conditions, thereby reducing further complications and morbidity.

scholarly journals Research on Real-Time Multiple Single Garbage Classification Based on Convolutional Neural Network

2020 ◽  
Vol 2020 ◽  
pp. 1-6
Author(s):  
Jian-ye Yuan ◽  
Xin-yuan Nan ◽  
Cheng-rong Li ◽  
Le-le Sun
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Real Time ◽  
Environmental Science ◽  
Fine Tuning ◽  
Classification Model ◽  
Classification Models ◽  
Data Set ◽  
Classification Tasks ◽  
Accuracy Rates

Considering that the garbage classification is urgent, a 23-layer convolutional neural network (CNN) model is designed in this paper, with the emphasis on the real-time garbage classification, to solve the low accuracy of garbage classification and recycling and difficulty in manual recycling. Firstly, the depthwise separable convolution was used to reduce the Params of the model. Then, the attention mechanism was used to improve the accuracy of the garbage classification model. Finally, the model fine-tuning method was used to further improve the performance of the garbage classification model. Besides, we compared the model with classic image classification models including AlexNet, VGG16, and ResNet18 and lightweight classification models including MobileNetV2 and SuffleNetV2 and found that the model GAF_dense has a higher accuracy rate, fewer Params, and FLOPs. To further check the performance of the model, we tested the CIFAR-10 data set and found the accuracy rates of the model (GAF_dense) are 0.018 and 0.03 higher than ResNet18 and SufflenetV2, respectively. In the ImageNet data set, the accuracy rates of the model (GAF_dense) are 0.225 and 0.146 higher than Resnet18 and SufflenetV2, respectively. Therefore, the garbage classification model proposed in this paper is suitable for garbage classification and other classification tasks to protect the ecological environment, which can be applied to classification tasks such as environmental science, children’s education, and environmental protection.

Sign in / Sign up

Export Citation Format

Share Document