scholarly journals MHD Flow and Heat Transfer of Hybrid Nanofluid over an Exponentially Shrinking Surface with Heat Source/Sink

2021 ◽  
Vol 11 (17) ◽  
pp. 8199
Author(s):  
Mohamad Nizam Othman ◽  
Alias Jedi ◽  
Nor Ashikin Abu Bakar
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Heat Source ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Mhd Flow ◽  
Hybrid Nanofluid ◽  
Flow And Heat Transfer ◽  
Source Sink ◽  
Shrinking Surface

In nanotechnology research, nanofluid technology contributes many applications to engineering applications and industry, such as power generation, solar collection, heat exchangers for cooling, and many more. However, there are still a few constraints in terms of heat transfer enhancement, although nanofluid properties show the best heat transfer rate compared with conventional fluids. Thus, this study was conducted for the purpose of investigating the behaviors of flow and heat transfer of hybrid nanofluid with carbon nanotubes (CNTs) on a permeable exponentially shrinking surface, as well as investigating the effects of a magnetic field and heat source/sink. This study was conducted by developing a mathematical model, which was the Tiwari–Das model for momentum and energy equations, and then transforming the model’s partial differential equations (PDEs) to ordinary differential equations (ODEs) using a similarity solution. Next, these equations were solved numerically using the MATLAB bvp4c boundary value problem solver. The authors particularly explored these behaviors with a few variations. Based on the results obtained, it was found that dual solutions exist in a specific range of the shrinking case, and that the critical point also exists in a range of −1.5 < < −1 with different parameters. For the heat source/sink effect, the Nusselt number was higher when heat sink case ε < 0, whereas it decreased when the heat source case ε > 0. Therefore, this study deduced that the heat transfer rate of hybrid nanofluid (CNTs/Cu–water) is better than regular nanofluid (CNT–water) and conventional fluid (water). The present study took into consideration the problem of MHD flow and heat transfer analysis of a hybrid nanofluid towards an exponentially shrinking surface with the presence of heat source/sink and thermal radiation effects. The authors show that dual solutions exist within a specific range of values due to the shrinking case. The current work is predicted to have numerous benefits in equivalent real-world systems.

scholarly journals Unsteady Convective MHD Flow and Heat Transfer of a Viscous Nanofluid across a Porous Stretching/Shrinking Surface: Existence of Multiple Solutions

Crystals ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 1359
Author(s):  
Nawal A. Alshehri ◽  
Awatef Abidi ◽  
Muhammad Riaz Khan ◽  
Yanala Dharmendar Reddy ◽  
Saim Rasheed ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Heat Source ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Mhd Flow ◽  
Velocity Slip ◽  
Solid Particles ◽  
Friction Drag ◽  
Shrinking Surface

The suspension of tiny solid particles inside the energy transport liquids could enhance their thermal conductivity as well as provide an efficient and inventive approach to significantly improve their properties of heat transport. Therefore, our aim is to explore the radiative two-dimensional unsteady flow of a viscous nanofluid about an aligned magnetic field that includes the joint effect of suction, velocity slip, and heat source across a porous convective stretching/shrinking surface. Initially, using non-dimensional variables, the nonlinear governing partial differential equations (PDEs) were transformed into ordinary differential equations (ODEs) which were subsequently solved with the help of bvp4c built-in package in MATLAB. The results declare that escalating the values of the unsteadiness parameter escalates the friction drag whereas it reduces with the escalation of the slip parameter. Furthermore, the heat transfer rate escalates with the escalation of radiation and concentration parameter, and the escalation of the heat source parameter causes to reduce the heat transfer rate. Finally, it is found that the rate of heat transfer and friction drag continuously improve and decline against the rising rates of stretching, respectively.

scholarly journals Hybrid Nanofluid Flow over a Permeable Non-Isothermal Shrinking Surface

Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 538
Author(s):  
Iskandar Waini ◽  
Anuar Ishak ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Magnetic Parameter ◽  
Hybrid Nanoparticles ◽  
Hybrid Nanofluid ◽  
Al2o3 Nanoparticles ◽  
Nanofluid Flow ◽  
Flow And Heat Transfer ◽  
Shrinking Surface

In this paper, we examine the influence of hybrid nanoparticles on flow and heat transfer over a permeable non-isothermal shrinking surface and we also consider the radiation and the magnetohydrodynamic (MHD) effects. A hybrid nanofluid consists of copper (Cu) and alumina (Al2O3) nanoparticles which are added into water to form Cu-Al2O3/water. The similarity equations are obtained using a similarity transformation and numerical results are obtained via bvp4c in MATLAB. The results show that dual solutions are dependent on the suction strength of the shrinking surface; in addition, the heat transfer rate is intensified with an increase in the magnetic parameter and the hybrid nanoparticles volume fractions for higher values of the radiation parameter. Furthermore, the heat transfer rate is higher for isothermal surfaces as compared with non-isothermal surfaces. Further analysis proves that the first solution is physically reliable and stable.

scholarly journals Parametric analysis of the heat transfer behavior of the nano-particle ionic-liquid flow between concentric cylinders

2021 ◽  
Vol 13 (6) ◽  
pp. 168781402110240
Author(s):  
Rehan Ali Shah ◽  
Hidayat Ullah ◽  
Muhammad Sohail Khan ◽  
Aamir Khan
Keyword(s):  
Heat Transfer ◽  
Ionic Liquid ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Heat Source ◽  
Ordinary Differential Equations ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Concentric Cylinders

This paper investigates the enhanced viscous behavior and heat transfer phenomenon of an unsteady two di-mensional, incompressible ionic-nano-liquid squeezing flow between two infinite parallel concentric cylinders. To analyze heat transfer ability, three different type nanoparticles such as Copper, Aluminum [Formula: see text], and Titanium oxide [Formula: see text] of volume fraction ranging from 0.1 to 0.7 nm, are added to the ionic liquid in turns. The Brinkman model of viscosity and Maxwell-Garnets model of thermal conductivity for nano particles are adopted. Further, Heat source [Formula: see text], is applied between the concentric cylinders. The physical phenomenon is transformed into a system of partial differential equations by modified Navier-Stokes equation, Poisson equation, Nernst-Plank equation, and energy equation. The system of nonlinear partial differential equations, is converted to a system of coupled ordinary differential equations by opting suitable transformations. Solution of the system of coupled ordinary differential equations is carried out by parametric continuation (PC) and BVP4c matlab based numerical methods. Effects of squeeze number ( S), volume fraction [Formula: see text], Prandtle number (Pr), Schmidt number [Formula: see text], and heat source [Formula: see text] on nano-ionicliquid flow, ions concentration distribution, heat transfer rate and other physical quantities of interest are tabulated, graphed, and discussed. It is found that [Formula: see text] and Cu as nanosolid, show almost the same enhancement in heat transfer rate for Pr = 0.2, 0.4, 0.6.

Non-axisymmetric Homann stagnation point flow and heat transfer past a stretching/shrinking sheet using hybrid nanofluid

2020 ◽  
Vol 30 (10) ◽  
pp. 4583-4606 ◽  
Author(s):  
Najiyah Safwa Khashi’ie ◽  
Norihan Md Arifin ◽  
Ioan Pop ◽  
Roslinda Nazar ◽  
Ezad Hafidz Hafidzuddin ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Strain Rate ◽  
Stagnation Point ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Hybrid Nanofluid ◽  
Ambient Fluid ◽  
Content Type ◽  
Flow And Heat Transfer

Purpose This paper aims to scrutinize the analysis of non-axisymmetric Homann stagnation point flow and heat transfer of hybrid Cu-Al2O3/water nanofluid over a stretching/shrinking flat plate. Design/methodology/approach The similarity transformation which fulfils the continuity equation is opted to transform the coupled momentum and energy equations into the nonlinear ordinary differential equations. Numerical solutions which are elucidated in the tables and graphs are obtained using the bvp4c solver. Findings Non-unique solutions (first and second) are feasible for both stretching and shrinking cases within the specific values of the parameters. First solution is the physical/real solution based on the execution of stability analysis. An upsurge of the ratio of the ambient fluid strain rate to the plate strain rate can delay the boundary layer separation, whereas a boost of the ratio of the ambient fluid shear rate to the plate strain rate only accelerates the separation of boundary layer. The heat transfer rate of hybrid nanofluid is greater for the stretching case than the shrinking case. However, for the shrinking case, the heat transfer rate intensifies with the increment of the copper (Cu) nanoparticles volume fraction, whereas a contrary result is found for the stretching case. Originality/value The present numerical results are original and new. It can contribute to other researchers on electing the relevant parameters to optimize the heat transfer process in the modern industry, and the right parameters to generate non-unique solution so that no misjudgment on flow and heat transfer features.

MHD hybrid nanofluid flow with convective heat transfer over a permeable stretching/shrinking surface with radiation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nur Syahirah Wahid ◽  
Norihan Md Arifin ◽  
Najiyah Safwa Khashi'ie ◽  
Ioan Pop ◽  
Norfifah Bachok ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Hybrid Nanofluid ◽  
Convective Boundary Conditions ◽  
Nanofluid Flow ◽  
Convective Boundary ◽  
Content Type ◽  
Shrinking Surface

Purpose The purpose of this paper is to numerically investigate the hybrid nanofluid flow with the imposition of magnetohydrodynamic (MHD) and radiation effects alongside the convective boundary conditions over a permeable stretching/shrinking surface. Design/methodology/approach The mathematical model is formulated in the form of partial differential equations (PDEs) and are then transformed into the form of ordinary differential equations (ODEs) by using the similarity variables. The deriving ODEs are solved numerically by using the bvp4c solver in MATLAB software. Stability analysis also has been performed to determine the stable solution among the dual solutions obtain. For method validation purposes, a comparison of numerical results has been made with the previous studies. Findings The flow and the heat transfer of the fluid at the boundary layer are described through the plot of the velocity profile, temperature profile, skin friction coefficient and local Nusselt number that are presented graphically. Dual solutions are obtained, but only the first solution is stable. For the realizable solution at the shrinking surface, the proliferation of nanoparticle volume fraction (copper) and magnetic (magnetohydrodynamics) parameters can impede the boundary layer separation. Also, Biot number could enhance the temperature profile and the heat transfer rate at the shrinking surface region. The incrementation of 0.1% of Biot number has enhanced the heat transfer rate by approximately 0.1% and the incrementation of 0.5% volume fraction for copper has reduced the heat transfer rate by approximately 0.17%. Originality/value The presented model and numerical results are original and new. It can be used as a future reference for further investigation and related practical application. The main contribution of this investigation includes giving the initial prediction and providing the numerical data for the other researchers for their future reference regarding the impacts of nanoparticles volumetric concentration towards the main physical quantities of interest in the presence of magnetic and radiation parameters with the convective boundary conditions.

scholarly journals Mixed Convection in MHD Flow and Heat Transfer Rate Near a Stagnation-Point on a Non-Linear Vertical Stretching Sheet

2020 ◽  
Vol 25 (1) ◽  
pp. 37-51 ◽  
Author(s):  
O.J. Fenuga ◽  
A.R. Hassan ◽  
P.O. Olanrewaju
Keyword(s):  
Heat Transfer ◽  
Mixed Convection ◽  
Stagnation Point ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Stretching Sheet ◽  
Mhd Flow ◽  
Surface Drag ◽  
Flow Parameters ◽  
Flow And Heat Transfer

AbstractThis work investigates the mixed convection in a Magnetohydrodynamic (MHD) flow and heat transfer rate near a stagnation-point region over a nonlinear vertical stretching sheet. Using a similarity transformation, the governing equations are transformed into a system of ordinary differential equations which are solved numerically using the fourth order Runge-Kutta method with shooting technique. The influence of pertinent flow parameters on velocity, temperature, surface drag force and heat transfer rate are computed and analyzed. Graphical and tabular results are given to examine the nature of the problem. The heat transfer rate at the surface increases with the mixed convection.

Sign in / Sign up

Export Citation Format

Share Document