scholarly journals An Improved GPR Method Based on BP and RPCA for Tunnel Lining Defects Detection and Its Application in Qiyue Mountain Tunnel, China

2021 ◽  
Vol 11 (21) ◽  
pp. 10234
Author(s):  
Dongli Li ◽  
Echuan Yan
Keyword(s):  
Data Quality ◽  
Synthetic Data ◽  
Principal Component ◽  
Real Data ◽  
Tunnel Lining ◽  
Safety Risks ◽  
Data Processing Method ◽  
Nondestructive Testing Method ◽  
Ground Penetrating ◽  
Mountain Tunnel

Tunnel lining defects are one of the most common problems that tunnels experience during operation, and they can pose severe safety risks. The most popular nondestructive testing method for detecting tunnel lining defects is ground penetrating radar (GPR), one of the basic geophysical applications. However, detection responses might differ significantly from the real shape of tunnel lining defects, making it challenging to identify and interpret. When data quality is poor, interpretation and identification become more challenging, resulting in a high cost of tunnel repairs. The improved back projection (BP) imaging and robust principal component analysis (RPCA) are used in this work to offer a GPR data processing method. Even in the event of poor data quality, our method could recover GPR responses, allowing the shapes and locations of tunnel lining flaws to be clearly depicted. With BP imaging, this approach recovers the tunnel defects’ responses to better forms and positions, and with RPCA, it further isolates the target imaging from clutters. Several synthetic data demonstrate that the approach presented in this work may successfully repair and extract the positions and forms of lining defects, making them easier to identify and comprehend. Furthermore, our technique was used to GPR data gathered from the Qiyue Mountain Tunnel in China, yielding more accurate findings than the traditional method, which was validated by the actual scenario to illustrate the efficiency of our method on real data.

Application of the Ground Penetrating Radar in the Quality Detection of Tunnel Lining

2011 ◽  
Vol 243-249 ◽  
pp. 5381-5385 ◽  
Author(s):  
Ji Shun Pan ◽  
Lei Yang ◽  
Yuan Bao Leng ◽  
Zhi Quan Lv
Keyword(s):  
Data Processing ◽  
Ground Penetrating Radar ◽  
Tunnel Lining ◽  
Quality Detection ◽  
Steel Bar ◽  
Data Processing Method ◽  
Work Mechanism ◽  
Important Means ◽  
Working Principle ◽  
Ground Penetrating

Based on the ground penetrating radar's work mechanism, this article briefly introduces the working principle and the data processing method of ground penetrating radar detecting the tunnel lining. In view of the lining quality detection's characteristics, it summarizes a series of atlas reflection characteristic of the examination target such as the lining thickness, the backfill quality, the steel bar reinforcement situation, the adjacent formation structural feature and so on, and analyses and comments on them with project examples. The research believes that under appropriate working condition, as an important means to guarantee the construction security and maintain the tunnel health, ground penetrating radar technology can examine the lining quality fast and effectively, and meet the needs of the tunnel lining quality detection with suitable equipment, working method and data processing plan.

scholarly journals Detection of Underground Anomalies Using Analysis of Ground Penetrating Radar Attribute

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Cuong Van Anh LE ◽  
Thuan Van NGUYEN
Keyword(s):  
Ground Penetrating Radar ◽  
Urban Areas ◽  
Geophysical Methods ◽  
Synthetic Data ◽  
Drainage System ◽  
Real Data ◽  
Building Structures ◽  
Water Drainage ◽  
Diffraction Curve ◽  
Ground Penetrating

Need of specifying underground construction works for supporting further tasks as maintenance, repairing, or setting up new underground structures. For these needs, ground penetrating radar, one of the efficient geophysical methods, can bring high-resolution and quick underground image revealing existence of both natural and artificial anomalies. Its fixed receiver-transmitter antennas setting as constant offset is commonly used in urban areas. Conventionally, hyperbolae events are crucial indicator for scattering objects as kinds of pipes, water drainage system, and concrete building structures as well as sink holes. Calculation of their depths and sizes requires migration analysis with the environment velocity. Migrated sections with different velocity show different chaos degrees of transformation from a hyperbola diffraction curve to its focused area. We have researched diagrams of different Ground Penetrating Radar attributes as energy, entropy, and varimax dependent on two variables, velocity and window zone covering diffraction events from a set of synthetic data and real data, in specifying the environment velocity. We have developed a novel technique for evaluation of the ground velocity and object’s size by combination of the new varimax diagram and the Kirchhoff migration method. The technique can define contribution of diffracted ground penetrating radar waves for building the diagram after removing the reflection contribution. The synthetic datasets consist of different random background noise levels and expressions of different-sized circular and rectangular pipes. The real data is measured for detecting two underground gas pipes in Ba Ria – Vung Tau province, Vietnam.

Variational Mixture of Bayesian Independent Component Analyzers

2003 ◽  
Vol 15 (1) ◽  
pp. 213-252 ◽  
Author(s):  
R. A. Choudrey ◽  
S. J. Roberts
Keyword(s):  
Mixture Model ◽  
Synthetic Data ◽  
Principal Component ◽  
Real Data ◽  
Component Analysis ◽  
Magnetic Resonance Images ◽  
Independent Component ◽  
Optimum Number ◽  
Image Modeling ◽  
Variational Bayesian Inference

There has been growing interest in subspace data modeling over the past few years. Methods such as principal component analysis, factor analysis, and independent component analysis have gained in popularity and have found many applications in image modeling, signal processing, and data compression, to name just a few. As applications and computing power grow, more and more sophisticated analyses and meaningful representations are sought. Mixture modeling methods have been proposed for principal and factor analyzers that exploit local gaussian features in the subspace manifolds. Meaningful representations may be lost, however, if these local features are nongaussian or discontinuous. In this article, we propose extending the gaussian analyzers mixture model to an independent component analyzers mixture model. We employ recent developments in variational Bayesian inference and structure determination to construct a novel approach for modeling nongaussian, discontinuous manifolds. We automatically determine the local dimensionality of each manifold and use variational inference to calculate the optimum number of ICA components needed in our mixture model. We demonstrate our framework on complex synthetic data and illustrate its application to real data by decomposing functional magnetic resonance images into meaningful—and medically useful—features.

Method of determination of the text direction on the image with the use of convolutional neural network

2020 ◽  
pp. 96-99
Author(s):  
P.L. Nikolaev
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Deep Neural Network ◽  
Binary Classification ◽  
Synthetic Data ◽  
Real Data ◽  
Method Of Determination ◽  
Classification Of Images

This article deals with method of binary classification of images with small text on them Classification is based on the fact that the text can have 2 directions – it can be positioned horizontally and read from left to right or it can be turned 180 degrees so the image must be rotated to read the sign. This type of text can be found on the covers of a variety of books, so in case of recognizing the covers, it is necessary first to determine the direction of the text before we will directly recognize it. The article suggests the development of a deep neural network for determination of the text position in the context of book covers recognizing. The results of training and testing of a convolutional neural network on synthetic data as well as the examples of the network functioning on the real data are presented.

scholarly journals G-Tric: generating three-way synthetic datasets with triclustering solutions

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
João Lobo ◽  
Rui Henriques ◽  
Sara C. Madeira
Keyword(s):  
State Of The Art ◽  
Synthetic Data ◽  
Ground Truth ◽  
Real Data ◽  
Three Dimensions ◽  
Additional Advantage ◽  
Urban Dynamics ◽  
Data Generator ◽  
Real World Datasets ◽  
Synthetic Datasets

Abstract Background Three-way data started to gain popularity due to their increasing capacity to describe inherently multivariate and temporal events, such as biological responses, social interactions along time, urban dynamics, or complex geophysical phenomena. Triclustering, subspace clustering of three-way data, enables the discovery of patterns corresponding to data subspaces (triclusters) with values correlated across the three dimensions (observations $$\times$$ × features $$\times$$ × contexts). With increasing number of algorithms being proposed, effectively comparing them with state-of-the-art algorithms is paramount. These comparisons are usually performed using real data, without a known ground-truth, thus limiting the assessments. In this context, we propose a synthetic data generator, G-Tric, allowing the creation of synthetic datasets with configurable properties and the possibility to plant triclusters. The generator is prepared to create datasets resembling real 3-way data from biomedical and social data domains, with the additional advantage of further providing the ground truth (triclustering solution) as output. Results G-Tric can replicate real-world datasets and create new ones that match researchers needs across several properties, including data type (numeric or symbolic), dimensions, and background distribution. Users can tune the patterns and structure that characterize the planted triclusters (subspaces) and how they interact (overlapping). Data quality can also be controlled, by defining the amount of missing, noise or errors. Furthermore, a benchmark of datasets resembling real data is made available, together with the corresponding triclustering solutions (planted triclusters) and generating parameters. Conclusions Triclustering evaluation using G-Tric provides the possibility to combine both intrinsic and extrinsic metrics to compare solutions that produce more reliable analyses. A set of predefined datasets, mimicking widely used three-way data and exploring crucial properties was generated and made available, highlighting G-Tric’s potential to advance triclustering state-of-the-art by easing the process of evaluating the quality of new triclustering approaches.

Single Depth View Based Real-Time Reconstruction of Hand-Object Interactions

2021 ◽  
Vol 40 (3) ◽  
pp. 1-12
Author(s):  
Hao Zhang ◽  
Yuxiao Zhou ◽  
Yifei Tian ◽  
Jun-Hai Yong ◽  
Feng Xu
Keyword(s):  
Real Time ◽  
Synthetic Data ◽  
Real Data ◽  
Depth Image ◽  
Real Time System ◽  
The Real ◽  
Time Performance ◽  
Contact Constraint ◽  
Object Shapes ◽  
Object Interactions

Reconstructing hand-object interactions is a challenging task due to strong occlusions and complex motions. This article proposes a real-time system that uses a single depth stream to simultaneously reconstruct hand poses, object shape, and rigid/non-rigid motions. To achieve this, we first train a joint learning network to segment the hand and object in a depth image, and to predict the 3D keypoints of the hand. With most layers shared by the two tasks, computation cost is saved for the real-time performance. A hybrid dataset is constructed here to train the network with real data (to learn real-world distributions) and synthetic data (to cover variations of objects, motions, and viewpoints). Next, the depth of the two targets and the keypoints are used in a uniform optimization to reconstruct the interacting motions. Benefitting from a novel tangential contact constraint, the system not only solves the remaining ambiguities but also keeps the real-time performance. Experiments show that our system handles different hand and object shapes, various interactive motions, and moving cameras.

scholarly journals Separation of Chromatographic Co-Eluted Compounds by Clustering and by Functional Data Analysis

Metabolites ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 214
Author(s):  
Aneta Sawikowska ◽  
Anna Piasecka ◽  
Piotr Kachlicki ◽  
Paweł Krajewski
Keyword(s):  
Simulated Data ◽  
Principal Component ◽  
Real Data ◽  
Functional Principal Component Analysis ◽  
Additional Advantage ◽  
Time Alignment ◽  
Peak Separation ◽  
Biological Mixtures ◽  
Overlapping Peaks ◽  
Retention Time Alignment

Peak overlapping is a common problem in chromatography, mainly in the case of complex biological mixtures, i.e., metabolites. Due to the existence of the phenomenon of co-elution of different compounds with similar chromatographic properties, peak separation becomes challenging. In this paper, two computational methods of separating peaks, applied, for the first time, to large chromatographic datasets, are described, compared, and experimentally validated. The methods lead from raw observations to data that can form inputs for statistical analysis. First, in both methods, data are normalized by the mass of sample, the baseline is removed, retention time alignment is conducted, and detection of peaks is performed. Then, in the first method, clustering is used to separate overlapping peaks, whereas in the second method, functional principal component analysis (FPCA) is applied for the same purpose. Simulated data and experimental results are used as examples to present both methods and to compare them. Real data were obtained in a study of metabolomic changes in barley (Hordeum vulgare) leaves under drought stress. The results suggest that both methods are suitable for separation of overlapping peaks, but the additional advantage of the FPCA is the possibility to assess the variability of individual compounds present within the same peaks of different chromatograms.

scholarly journals Real UAV-Bird Image Classification Using CNN with a Synthetic Dataset

2021 ◽  
Vol 11 (9) ◽  
pp. 3863
Author(s):  
Ali Emre Öztürk ◽  
Ergun Erçelebi
Keyword(s):  
Deep Learning ◽  
Image Classification ◽  
Synthetic Data ◽  
Real Data ◽  
Corner Detection ◽  
Batch Size ◽  
Test Accuracy ◽  
Classification Problems ◽  
Auc Value ◽  
Classification Test

A large amount of training image data is required for solving image classification problems using deep learning (DL) networks. In this study, we aimed to train DL networks with synthetic images generated by using a game engine and determine the effects of the networks on performance when solving real-image classification problems. The study presents the results of using corner detection and nearest three-point selection (CDNTS) layers to classify bird and rotary-wing unmanned aerial vehicle (RW-UAV) images, provides a comprehensive comparison of two different experimental setups, and emphasizes the significant improvements in the performance in deep learning-based networks due to the inclusion of a CDNTS layer. Experiment 1 corresponds to training the commonly used deep learning-based networks with synthetic data and an image classification test on real data. Experiment 2 corresponds to training the CDNTS layer and commonly used deep learning-based networks with synthetic data and an image classification test on real data. In experiment 1, the best area under the curve (AUC) value for the image classification test accuracy was measured as 72%. In experiment 2, using the CDNTS layer, the AUC value for the image classification test accuracy was measured as 88.9%. A total of 432 different combinations of trainings were investigated in the experimental setups. The experiments were trained with various DL networks using four different optimizers by considering all combinations of batch size, learning rate, and dropout hyperparameters. The test accuracy AUC values for networks in experiment 1 ranged from 55% to 74%, whereas the test accuracy AUC values in experiment 2 networks with a CDNTS layer ranged from 76% to 89.9%. It was observed that the CDNTS layer has considerable effects on the image classification accuracy performance of deep learning-based networks. AUC, F-score, and test accuracy measures were used to validate the success of the networks.

scholarly journals sepal: identifying transcript profiles with spatial patterns by diffusion-based modeling

2021 ◽  
Author(s):  
Alma Andersson ◽  
Joakim Lundeberg
Keyword(s):  
Spatial Patterns ◽  
Expression Profiles ◽  
Synthetic Data ◽  
Real Data ◽  
Cell Types ◽  
Statistical Hypothesis ◽  
Supplementary Information ◽  
Statistical Hypothesis Testing ◽  
Transcriptomics Data ◽  
Transcript Profiles

Abstract Motivation Collection of spatial signals in large numbers has become a routine task in multiple omics-fields, but parsing of these rich datasets still pose certain challenges. In whole or near-full transcriptome spatial techniques, spurious expression profiles are intermixed with those exhibiting an organized structure. To distinguish profiles with spatial patterns from the background noise, a metric that enables quantification of spatial structure is desirable. Current methods designed for similar purposes tend to be built around a framework of statistical hypothesis testing, hence we were compelled to explore a fundamentally different strategy. Results We propose an unexplored approach to analyze spatial transcriptomics data, simulating diffusion of individual transcripts to extract genes with spatial patterns. The method performed as expected when presented with synthetic data. When applied to real data, it identified genes with distinct spatial profiles, involved in key biological processes or characteristic for certain cell types. Compared to existing methods, ours seemed to be less informed by the genes’ expression levels and showed better time performance when run with multiple cores. Availabilityand implementation Open-source Python package with a command line interface (CLI), freely available at https://github.com/almaan/sepal under an MIT licence. A mirror of the GitHub repository can be found at Zenodo, doi: 10.5281/zenodo.4573237. Supplementary information Supplementary data are available at Bioinformatics online.

scholarly journals Benchmarking Unsupervised Outlier Detection with Realistic Synthetic Data

2021 ◽  
Vol 15 (4) ◽  
pp. 1-20
Author(s):  
Georg Steinbuss ◽  
Klemens Böhm
Keyword(s):  
Outlier Detection ◽  
Synthetic Data ◽  
Real Data ◽  
Detection Methods ◽  
Quality Of Data ◽  
Benchmark Data ◽  
Core Idea ◽  
Generic Process ◽  
Unsupervised Outlier Detection

Benchmarking unsupervised outlier detection is difficult. Outliers are rare, and existing benchmark data contains outliers with various and unknown characteristics. Fully synthetic data usually consists of outliers and regular instances with clear characteristics and thus allows for a more meaningful evaluation of detection methods in principle. Nonetheless, there have only been few attempts to include synthetic data in benchmarks for outlier detection. This might be due to the imprecise notion of outliers or to the difficulty to arrive at a good coverage of different domains with synthetic data. In this work, we propose a generic process for the generation of datasets for such benchmarking. The core idea is to reconstruct regular instances from existing real-world benchmark data while generating outliers so that they exhibit insightful characteristics. We propose and describe a generic process for the benchmarking of unsupervised outlier detection, as sketched so far. We then describe three instantiations of this generic process that generate outliers with specific characteristics, like local outliers. To validate our process, we perform a benchmark with state-of-the-art detection methods and carry out experiments to study the quality of data reconstructed in this way. Next to showcasing the workflow, this confirms the usefulness of our proposed process. In particular, our process yields regular instances close to the ones from real data. Summing up, we propose and validate a new and practical process for the benchmarking of unsupervised outlier detection.

Sign in / Sign up

Export Citation Format

Share Document