scholarly journals SERS-Active Substrates Nanoengineering Based on e-Beam Evaporated Self-Assembled Silver Films

2019 ◽  
Vol 9 (19) ◽  
pp. 3988 ◽  
Author(s):  
Irina Boginskaya ◽  
Marina Sedova ◽  
Aleksandr Baburin ◽  
Konstantin Afanas’ev ◽  
Alexander Zverev ◽  
...  
Keyword(s):  
Surface Morphology ◽  
Film Surface ◽  
High Amplitude ◽  
Surface Enhanced Raman Spectroscopy ◽  
Electron Beam Evaporation ◽  
Machine Learning Techniques ◽  
Raman Signal ◽  
Silver Films ◽  
Amplitude Spectra ◽  
Self Assembled

Surface-enhanced Raman spectroscopy (SERS) has been intensely studied as a possible solution in the fields of analytical chemistry and biosensorics for decades. Substantial research has been devoted to engineering signal enhanced SERS-active substrates based on semi-continuous nanostructured silver and gold films, or agglomerates of micro- and nanoparticles in solution. Herein, we demonstrate the high-amplitude spectra of myoglobin precipitated out of ultra-low concentration solutions (below 10 μg/mL) using e-beam evaporated continuous self-assembled silver films. We observe up to 105 times Raman signal amplification with purposefully designed SERS-active substrates in comparison with the control samples. SERS-active substrates are obtained by electron beam evaporation of silver thin films with well controlled nanostructured surface morphology. The characteristic dimensions of the morphology elements vary in the range from several to tens of nanometers. Using optical confocal microscopy we demonstrate that proteins form a conformation on the surface of the self-assembled silver film, which results in an effective enhancement of giant Raman scattering signal. We investigate the various SERS substrates surface morphologies by means of atomic force microscopy (AFM) in combination with deep data analysis with Gwyddion software and a number of machine learning techniques. Based on these results, we identify the most significant film surface morphology patterns and evaporation recipe parameters to obtain the highest amplitude SERS spectra. Moreover, we demonstrate the possibility of automated selection of suitable morphological parameters to obtain the high-amplitude spectra. The developed AFM data auto-analysis procedures are used for smart optimization of SERS-active substrates nanoengineering processes.

The Study on Surface Morphology and Residual Stress of Al2O3 Film

2013 ◽  
Vol 275-277 ◽  
pp. 2006-2009
Author(s):  
Ying Dong Pu ◽  
Wu Tang ◽  
Yu Tong Yang
Keyword(s):  
Residual Stress ◽  
Surface Roughness ◽  
Surface Morphology ◽  
Substrate Temperature ◽  
Film Surface ◽  
Electron Beam Evaporation ◽  
Important Condition ◽  
Force Microscopy ◽  
Atom Force Microscopy ◽  
Film Microstructure

The aluminum oxide (Al2O3) films are grown on n-type Si-(100) substrate by electron beam evaporation at substrate temperature 500°C~800°C. The Al2O3film surface morphology is characterized by atom force microscopy (AFM) to evaluate the grain microstructure, and the residual stress was investigated by wafer stress analyzer. The results show that different substrate temperature is important condition to the properties of Al2O3film. Microstructure characterization indicates that the film surface at low substrate temperature is smoother, and the surface roughness of these Al2O3films is in the range 1-6 nm. The residual stress increases with increasing the substrate temperature, while the stress decreases after annealing in N2condition. It also can be concluded that the microstructure is correlated with residual stress.

Optical Properties of Sputtered Silver Granular Films

2005 ◽  
Vol 480-481 ◽  
pp. 287-292 ◽  
Author(s):  
S.E. Paje ◽  
F. Teran ◽  
J.M. Riveiro ◽  
J. Llopis ◽  
M.A. García ◽  
...  
Keyword(s):  
Silver Nanoparticles ◽  
Optical Properties ◽  
Optical Absorption ◽  
Surface Morphology ◽  
Silver Clusters ◽  
Plasmon Excitation ◽  
Granular Films ◽  
Silver Films ◽  
Atomic Force ◽  
Atomic Force Micrographs

In this research we study optical absorption and morphology of silver films prepared with a sputtering method. Silver granular films are obtained on a glass substrate for films with thickness smaller than about 60 Å. Superficial silver clusters of around 100 nm in diameter are clearly seen in the atomic force micrographs. The absorption of these samples are characterized by plasmon excitation in the 450-650 nm spectral range, which differs from the known excitation of silver nanoparticles fabricated by different techniques. The optical absorption of silver granular films depend on sputtering conditions like substrate temperature or deposition rate and correlates with the surface morphology.

scholarly journals Rapid uropathogen identification using surface enhanced Raman spectroscopy active filters

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Simon D. Dryden ◽  
Salzitsa Anastasova ◽  
Giovanni Satta ◽  
Alex J. Thompson ◽  
Daniel R. Leff ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Bacterial Infections ◽  
Surface Enhanced Raman Spectroscopy ◽  
Active Filters ◽  
Raman Signal ◽  
Rapid Diagnostics ◽  
Bacterial Classification ◽  
Surface Enhanced ◽  
Surface Enhanced Raman

AbstractUrinary tract infection is one of the most common bacterial infections leading to increased morbidity, mortality and societal costs. Current diagnostics exacerbate this problem due to an inability to provide timely pathogen identification. Surface enhanced Raman spectroscopy (SERS) has the potential to overcome these issues by providing immediate bacterial classification. To date, achieving accurate classification has required technically complicated processes to capture pathogens, which has precluded the integration of SERS into rapid diagnostics. This work demonstrates that gold-coated membrane filters capture and aggregate bacteria, separating them from urine, while also providing Raman signal enhancement. An optimal gold coating thickness of 50 nm was demonstrated, and the diagnostic performance of the SERS-active filters was assessed using phantom urine infection samples at clinically relevant concentrations (105 CFU/ml). Infected and uninfected (control) samples were identified with an accuracy of 91.1%. Amongst infected samples only, classification of three bacteria (Escherichia coli, Enterococcus faecalis, Klebsiella pneumoniae) was achieved at a rate of 91.6%.

scholarly journals Fabrication-friendly polarization-sensitive plasmonic grating for optimal surface-enhanced Raman spectroscopy

2020 ◽  
Vol 16 (1) ◽  
Author(s):  
Arpan Dutta ◽  
Tarmo Nuutinen ◽  
Khairul Alam ◽  
Antti Matikainen ◽  
Peng Li ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Fill Factor ◽  
Surface Enhanced Raman Spectroscopy ◽  
Transverse Magnetic ◽  
Raman Signal ◽  
Optical Resonance ◽  
Excitation Light ◽  
Surface Enhanced ◽  
Surface Enhanced Raman ◽  
Plasmonic Gratings

Abstract Plasmonic nanostructures are widely utilized in surface-enhanced Raman spectroscopy (SERS) from ultraviolet to near-infrared applications. Periodic nanoplasmonic systems such as plasmonic gratings are of great interest as SERS-active substrates due to their strong polarization dependence and ease of fabrication. In this work, we modelled a silver grating that manifests a subradiant plasmonic resonance as a dip in its reflectivity with significant near-field enhancement only for transverse-magnetic (TM) polarization of light. We investigated the role of its fill factor, commonly defined as a ratio between the width of the grating groove and the grating period, on the SERS enhancement. We designed multiple gratings having different fill factors using finite-difference time-domain (FDTD) simulations to incorporate different degrees of spectral detunings in their reflection dips from our Raman excitation (488 nm). Our numerical studies suggested that by tuning the spectral position of the optical resonance of the grating, via modifying their fill factor, we could optimize the achievable SERS enhancement. Moreover, by changing the polarization of the excitation light from transverse-magnetic to transverse-electric, we can disable the optical resonance of the gratings resulting in negligible SERS performance. To verify this, we fabricated and optically characterized the modelled gratings and ensured the presence of the desired detunings in their optical responses. Our Raman analysis on riboflavin confirmed that the higher overlap between the grating resonance and the intended Raman excitation yields stronger Raman enhancement only for TM polarized light. Our findings provide insight on the development of fabrication-friendly plasmonic gratings for optimal intensification of the Raman signal with an extra degree of control through the polarization of the excitation light. This feature enables studying Raman signal of exactly the same molecules with and without electromagnetic SERS enhancements, just by changing the polarization of the excitation, and thereby permits detailed studies on the selection rules and the chemical enhancements possibly involved in SERS.

Preparation and Characterization of Magnetic Force Microscopy Tips Coated with Nickel Films by e-Beam Evaporation

2018 ◽  
Vol 765 ◽  
pp. 3-7
Author(s):  
Badin Damrongsak ◽  
Samutchar Coomkaew ◽  
Karnt Saengkaew ◽  
Ittipon Cheowanish ◽  
Pongsakorn Jantaratana
Keyword(s):  
Film Thickness ◽  
Magnetic Force Microscopy ◽  
Magnetic Force ◽  
Film Surface ◽  
Electron Beam Evaporation ◽  
Film Stress ◽  
Nickel Films ◽  
Force Microscopy ◽  
Best Response ◽  
Cantilever Bending

In this work, magnetic force microscopy (MFM) tips coated with a nickel thin-film were prepared and characterized for applications in the measurement of the magnetic write field. Nickel films with various thicknesses in a range of 20 – 80 nm were deposited on silicon substrates and silicon atomic force microscopy (AFM) tips by electron beam evaporation. Film surface morphologies and magnetic properties of the coated nickel films were investigated by using AFM and vibrating sample magnetometry (VSM). The rms roughness increased with the film thickness and was in a range between 0.1 and 0.3 nm. VSM results revealed that the mean coercive field of the nickel films was 20 Oe and there was an increase in the coercivity as the film thickness increased. In addition, the prepared MFM tips were evaluated for the tip response to the dc and ac magnetic field generated from perpendicular write heads. It was found that the MFM tip had the best response to the write field when coated with 60 nm thick nickel film. The coating thickness over 60 nm was inapplicable due to the cantilever bending caused by the film stress.

Influence of Momentary Annealing on the Nanoscale Surface Morphology of Room Temperature Pulsed Laser Deposited NiO(111) Epitaxial Thin Films on Atomically Stepped Sapphire (0001) Substrates

2013 ◽  
Vol 1507 ◽  
Author(s):  
Ryosuke Yamauchi ◽  
Geng Tan ◽  
Daishi Shiojiri ◽  
Nobuo Tsuchimine ◽  
Koji Koyama ◽  
...  
Keyword(s):  
Thin Films ◽  
Surface Morphology ◽  
Room Temperature ◽  
Pulsed Laser ◽  
Film Surface ◽  
Transient State ◽  
Epitaxial Thin Films ◽  
Flat Surfaces ◽  
Surface Nanostructure ◽  
Atomically Flat

ABSTRACTWe examined the influence of momentary annealing on the nanoscale surface morphology of NiO(111) epitaxial thin films deposited on atomically stepped sapphire (0001) substrates at room temperature in O2 at 1.3 × 10−3 and 1.3 × 10−6 Pa using a pulsed laser deposition (PLD) technique. The NiO films have atomically flat surfaces (RMS roughness: approximately 0.1–0.2 nm) reflecting the step-and-terrace structures of the substrates, regardless of the O2 deposition pressure. After rapid thermal annealing (RTA) of the NiO(111) epitaxial film deposited at 1.3 × 10−3 Pa O2, a periodic straight nanogroove array related to the atomic steps of the substrate was formed on the film surface for 60 s. In contrast, the fabrication of a transient state in the nanogroove array formation was achieved with RTA of less than 1 s. However, when the O2 atmosphere during PLD was 1.3 × 10−6 Pa, random crystal growth was observed and resulted in a disordered rough surface nanostructure after RTA.

scholarly journals Laser Raman Spectroscopy with Different Excitation Sources and Extension to Surface Enhanced Raman Spectroscopy

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Md. Wahadoszamen ◽  
Arifur Rahaman ◽  
Nabil Md. Rakinul Hoque ◽  
Aminul I Talukder ◽  
Kazi Monowar Abedin ◽  
...  
Keyword(s):  
Raman Spectroscopy ◽  
Silver Nanoparticles ◽  
Rhodamine 6G ◽  
Detection Efficiency ◽  
Colloidal Suspension ◽  
Surface Enhanced Raman Spectroscopy ◽  
Laser Raman Spectroscopy ◽  
Raman Signal ◽  
Fluorescence Signal ◽  
Present System

A dispersive Raman spectrometer was used with three different excitation sources (Argon-ion, He-Ne, and Diode lasers operating at 514.5 nm, 633 nm, and 782 nm, resp.). The system was employed to a variety of Raman active compounds. Many of the compounds exhibit very strong fluorescence while being excited with a laser emitting at UV-VIS region, hereby imposing severe limitation to the detection efficiency of the particular Raman system. The Raman system with variable excitation laser sources provided us with a desired flexibility toward the suppression of unwanted fluorescence signal. With this Raman system, we could detect and specify the different vibrational modes of various hazardous organic compounds and some typical dyes (both fluorescent and nonfluorescent). We then compared those results with the ones reported in literature and found the deviation within the range of ±2 cm−1, which indicates reasonable accuracy and usability of the Raman system. Then, the surface enhancement technique of Raman spectrum was employed to the present system. To this end, we used chemically prepared colloidal suspension of silver nanoparticles as substrate and Rhodamine 6G as probe. We could observe significant enhancement of Raman signal from Rhodamine 6G using the colloidal solution of silver nanoparticles the average magnitude of which is estimated to be 103.

Effect of Pt film thickness on PtSi formation and film surface morphology

2005 ◽  
Vol 198 (1-3) ◽  
pp. 329-334 ◽  
Author(s):  
Jinghua Yin ◽  
Wei Cai ◽  
Yufeng Zheng ◽  
Liancheng Zhao
Keyword(s):  
Surface Morphology ◽  
Film Thickness ◽  
Film Surface

Raman Spectroscopy for the Study of XVI-XVII Centuries Colonial Paintings

2014 ◽  
Vol 1618 ◽  
pp. 141-151 ◽  
Author(s):  
Ma. A. García-Bucio ◽  
E. Casanova-González ◽  
J. L. Ruvalcaba-Sil
Keyword(s):  
Raman Spectroscopy ◽  
San Francisco ◽  
Reference Materials ◽  
Analytical Techniques ◽  
Surface Enhanced Raman Spectroscopy ◽  
Raman Signal ◽  
Invasive Approach ◽  
Full Characterization ◽  
Surface Enhanced Raman ◽  
Historical Objects

ABSTRACTOutstanding information about the material composition and pictorial techniques of the New Spain Colonial painting can be obtained via a full characterization using a set of analytical techniques. Given the cultural importance of this painting, a non-invasive approach is preferred. Moreover, the preparation and use of reference materials using original recipes is necessary for a correct interpretation of the spectroscopic data from historical objects. Here, we present the results obtained via an in-situ Raman spectroscopic analysis of a set of pictorial reference materials, created according to XVI and XVII centuries’ recipes. Several difficulties were encountered, such as the low Raman detection signal, an intrinsic fluorescence of the material, and in some cases even laser-induced degradation. For this reason, the usual molecular Raman analysis was extended to Surface Enhanced Raman Spectroscopy (SERS), which enhances the Raman signal and quenches the fluorescence. It was then applied to the analysis of two wood paintings from the ex-convent San Francisco Tepeyanco, in Tlaxcala.

Sign in / Sign up

Export Citation Format

Share Document