scholarly journals Performance of the Boost Converter Controlled with ZAD to Regulate DC Signals

Computation ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 96
Author(s):  
Simeón Casanova Trujillo ◽  
John E. Candelo-Becerra ◽  
Fredy E. Hoyos
Keyword(s):  
Steady State ◽  
Direct Current ◽  
Chaotic Attractor ◽  
Piecewise Linear ◽  
Boost Converter ◽  
Operating Conditions ◽  
Sliding Surface ◽  
Reference Signals ◽  
Relative Errors ◽  
Linear Technique

This paper presents the performance of a boost converter controlled with a zero average dynamics technique to regulate direct current signals. The boost converter is modeled in a compact form, and a variable change is performed to depend only on the γ parameter. A new sliding surface is proposed, where it is possible to regulate both the voltage and the current with low relative errors with respect to the reference signals. It is analytically demonstrated that the approximation of the switching surface by a piecewise linear technique is efficient in controlling the system. It is shown numerically that for certain operating conditions, the system is evolved into a chaotic attractor. The zero average dynamics technique implemented in the boost converter has good regulation, due to the presence of zones in the bi-parametric space. Furthermore, the zero average dynamics technique regulates the voltage well and presents a chaotic attractor with low steady-state error.

scholarly journals Dynamic Modeling of HVDC for Power System Stability Assessment: A Review, Issues, and Recommendations

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4829
Author(s):  
Tarek Abedin ◽  
M. Shahadat Hossain Lipu ◽  
Mahammad A. Hannan ◽  
Pin Jern Ker ◽  
Safwan A. Rahman ◽  
...  
Keyword(s):  
Steady State ◽  
Dynamic Modeling ◽  
Direct Current ◽  
Current Source ◽  
Computational Cost ◽  
Operating Conditions ◽  
System Stability ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Stability Assessment

High-voltage direct current (HVDC) has received considerable attention due to several advantageous features such as minimum transmission losses, enhanced stability, and control operation. An appropriate model of HVDC is necessary to assess the operating conditions as well as to analyze the transient and steady-state stabilities integrated with the AC networks. Nevertheless, the construction of an HVDC model is challenging due to the high computational cost, which needs huge ranges of modeling experience. Therefore, advanced dynamic modeling of HVDC is necessary to improve stability with minimum power loss. This paper presents a comprehensive review of the various dynamic modeling of the HVDC transmission system. In line with this matter, an in-depth investigation of various HVDC mathematical models is carried out including average-value modeling (AVM), voltage source converter (VSC), and line-commutated converter (LCC). Moreover, numerous stability assessment models of HVDC are outlined with regard to stability improvement models, current-source system stability, HVDC link stability, and steady-state rotor angle stability. In addition, the various control schemes of LCC-HVDC systems and modular multilevel converter- multi-terminal direct current (MMC-MTDC) are highlighted. This paper also identifies the key issues, the problems of the existing HVDC models as well as providing some selective suggestions for future improvement. All the highlighted insights in this review will hopefully lead to increased efforts toward the enhancement of the modeling for the HVDC system.

Validation of On-line Respiration Meter and its Applications by Computer Simulation

1992 ◽  
Vol 26 (5-6) ◽  
pp. 1355-1363 ◽  
Author(s):  
C-W. Kim ◽  
H. Spanjers ◽  
A. Klapwijk
Keyword(s):  
Steady State ◽  
Activated Sludge ◽  
Respiration Rate ◽  
Oxygen Demand ◽  
Operating Conditions ◽  
Mass Balances ◽  
Short Term ◽  
Respiration Rates ◽  
On Line ◽  
Made In

An on-line respiration meter is presented to monitor three types of respiration rates of activated sludge and to calculate effluent and influent short term biochemical oxygen demand (BODst) in the continuous activated sludge process. This work is to verify if the calculated BODst is reliable and the assumptions made in the course of developing the proposed procedure were acceptable. A mathematical model and a dynamic simulation program are written for an activated sludge model plant along with the respiration meter based on mass balances of BODst and DO. The simulation results show that the three types of respiration rate reach steady state within 15 minutes under reasonable operating conditions. As long as the respiration rate reaches steady state the proposed procedure calculates the respiration rate that is equal to the simulated. Under constant and dynamic BODst loading, the proposed procedure is capable of calculating the effluent and influent BODst with reasonable accuracy.

A Novel Control Scheme for PWM Boost Converter based on Sliding Mode Control using Particle Swarm Optimization

2020 ◽  
Vol 14 ◽  
Author(s):  
Gang Liu ◽  
Dong Qiu ◽  
Xiuru Wang ◽  
Ke Zhang ◽  
Huafeng Huang ◽  
...  
Keyword(s):  
Particle Swarm Optimization ◽  
Steady State ◽  
Sliding Mode ◽  
Particle Swarm ◽  
Mathematic Model ◽  
Absolute Error ◽  
Boost Converter ◽  
Sliding Mode Controller ◽  
Swarm Optimization ◽  
Steady State Performance

Background: The PWM Boost converter is a strongly nonlinear discrete system, especially when the input voltage or load varies widely, therefore, tuning the control parameters of which is a challenge work. Objective: In order to overcome the issues, particle swarm optimization (PSO) is employed for tuning the parameters of a sliding mode controller of a boost converter. Methods: Based on the analysis of the Boost converter model and its non-linear characteristics, a mathematic model of a boost converter with a sliding mode controller is built firstly. Then, the parameters of the Boost controller are adjusted based on the integrated time and absolute error (ITAE), integral square error (ISE) and integrated absolute error (IAE) indexes by PSO. Results: Simulation verification was performed, and the results show that the controllers tuned by the three indexes all have excellent robust stability. Conclusion: The controllers tuned by ITAE and ISE indexes have excellent steady-state performance, but the overshoot is large during the startup. The controller tuned by IAE index has better startup performance and slightly worse steady-state performance.

Steady-state Security Assessment Based on K-Means Clustering Algorithm and Phasor Measurement Units

2020 ◽  
Vol 13 (4) ◽  
pp. 559-570
Author(s):  
Bassam A. Hemade ◽  
Hamed A. Ibrahim ◽  
Hossam E.A. Talaat
Keyword(s):  
Steady State ◽  
Clustering Algorithm ◽  
System Security ◽  
Phasor Measurement Units ◽  
Operating Conditions ◽  
Security Assessment ◽  
State Security ◽  
Phasor Measurement ◽  
Measurement Units ◽  
Silhouette Analysis

Background: The security assessment plays a crucial role in the operation of the modern interconnected power system network. Methods: Hence, this paper addresses the application of k-means clustering algorithm equipped with Principal Component Analysis (PCA) and silhouette analysis for the classification of system security states. The proposed technique works on three principal axes; the first stage involves contingency quantification based on developed insecurity indices, the second stage includes dataset preparation to enhance the overall performance of the proposed method using PCA and silhouette analysis, and finally the application of the clustering algorithm over data. Results: The proposed composite insecurity index uses available synchronized measurements from Phasor Measurement Units (PMUs) to assess the development of cascading outages. Considering different operational scenarios and multiple levels of contingencies (up to N-3), Fast Decoupled Power Flow (FDPF) have been used for contingency replications. The developed technique applied to IEEE 14-bus and 57-bus standard test system for steady-state security evaluation. Conclusion: The obtained results ensure the robustness and effectiveness of the established procedure in the assessment of the system security irrespective of the network size or operating conditions.

Mathematical modelling of salt purification by recrystallization. Countercurrent arrangement

1986 ◽  
Vol 51 (11) ◽  
pp. 2481-2488
Author(s):  
Benitto Mayrhofer ◽  
Jana Mayrhoferová ◽  
Lubomír Neužil ◽  
Jaroslav Nývlt
Keyword(s):  
Steady State ◽  
Simple Model ◽  
Mathematical Modelling ◽  
Distribution Coefficient ◽  
Mother Liquor ◽  
Equilibrium Temperature ◽  
Operating Conditions ◽  
Limiting Case

The paper presents a simple model of recrystallization with countercurrent flows of the solution and the crystals being purified. The model assumes steady-state operating conditions, an equilibrium between the outlet streams of each stage, and the same equilibrium temperature and distribution coefficient for all stages. With these assumptions, the model provides the basis for analyzing the variation in the degree of purity as a function of the number of recrystallization stages. The analysis is facilitated by the use of a diagram constructed for the limiting case of perfect removal of the mother liquor from the crystals between the stages.

Self-Adjusting Characterization for Steady-State, Direct Current Cathode-Dominated Glow Discharge Plasmas at High Pressures

2013 ◽  
Vol 30 (8) ◽  
pp. 085201 ◽  
Author(s):  
Fang Ding ◽  
Shi-Jian Zheng ◽  
Bo Ke ◽  
Zhong-Liang Tang ◽  
Yi-Chuan Zhang ◽  
...  
Keyword(s):  
Steady State ◽  
Glow Discharge ◽  
Direct Current ◽  
High Pressures ◽  
Discharge Plasmas

Dynamic Stability of an Impact System Connected With Rock Drilling

1969 ◽  
Vol 36 (4) ◽  
pp. 743-749 ◽  
Author(s):  
C. C. Fu
Keyword(s):  
Computer Simulation ◽  
Exact Solution ◽  
Steady State ◽  
Asymptotic Stability ◽  
Piecewise Linear ◽  
Steady State Solution ◽  
External Excitation ◽  
Rock Drilling ◽  
Impact System ◽  
Number Of Cycles

This paper deals with asymptotic stability of an analytically derived, synchronous as well as nonsynchronous, steady-state solution of an impact system which exhibits piecewise linear characteristics connected with rock drilling. The exact solution, which assumes one impact for a given number of cycles of the external excitation, is derived, its asymptotic stability is examined, and ranges of parameters are determined for which asymptotic stability is assured. The theoretically predicted stability or instability is verified by a digital computer simulation.

Design and Performance of a Controlled Turbocharging System on Marine Diesel Engines

2006 ◽  
Author(s):  
Ioannis Vlaskos ◽  
Ennio Codan ◽  
Nikolaos Alexandrakis ◽  
George Papalambrou ◽  
Marios Ioannou ◽  
...  
Keyword(s):  
Steady State ◽  
Engine Performance ◽  
Operating Conditions ◽  
Electric Actuator ◽  
Engine Simulation ◽  
Engine Control System ◽  
Turbocharging System ◽  
Compressor Impeller ◽  
Marine Diesel ◽  
And Performance

The paper describes the design process for a controlled pulse turbocharging system (CPT) on a 5 cylinder 4-stroke marine engine and highlights the potential for improved engine performance as well as reduced smoke emissions under steady state and transient operating conditions, as offered by the following technologies: • controlled pulse turbocharging, • high pressure air injection onto the compressor impeller as well as into the air receiver, and • an electronic engine control system, including a hydraulic powered electric actuator. Calibrated engine simulation computer models based on the results of tests performed on the engine in its baseline configuration were used to design the CPT components. Various engine tests with CPT under steady state and transient operating conditions show the engine optimization process and how the above-mentioned technologies benefit engine behavior in both generator and propeller law operation.

Sign in / Sign up

Export Citation Format

Share Document