scholarly journals Black Phosphorus-Molybdenum Disulfide Hetero-Junctions Formed with Ink-Jet Printing for Potential Solar Cell Applications with Indium-Tin-Oxide

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 560
Author(s):  
Ravindra Ketan Mehta ◽  
Anupama Bhat Kaul
Keyword(s):  
Electrical Properties ◽  
Molybdenum Disulfide ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Cost Effective ◽  
Contact Materials ◽  
Ito Glass ◽  
The Future ◽  
Potential Applications ◽  
Jet Printing

In this work, we implemented liquid exfoliation to inkjet-print two-dimensional (2D) black phosphorous (BP) and molybdenum disulfide (MoS2) p–n heterojunctions on a standard indium tin oxide (ITO) glass substrate in a vertical architecture. We also compared the optical and electrical properties of the inkjet-printed BP layer with that of the MoS2 and the electrical properties of the mechanically exfoliated MoS2 with that of the inkjet-printed MoS2. We found significant differences in the optical characteristics of the inkjet-printed BP and MoS2 layers attributed to the differences in their underlying crystal structure. The newly demonstrated liquid exfoliated and inkjet-printed BP–MoS2 2D p–n junction was also compared with previous reports where mechanically exfoliated BP–MoS2 2D p–n junction were used. The electronic transport properties of mechanically exfoliated MoS2 membranes are typically better compared to inkjet-printed structures but inkjet printing offers a cost-effective and quicker way to fabricate heterostructures easily. In the future, the performance of inkjet-printed structures can be further improved by employing suitable contact materials, amongst other factors such as modifying the solvent chemistries. The architecture reported in this work has potential applications towards building solar cells with solution processed 2D materials in the future.

scholarly journals Structural and Electrical Properties of Sprayed In2S3 Films on ITO/Glass Substrate

2021 ◽  
Author(s):  
J. Koaib ◽  
N. Bouguila ◽  
M. Kraini ◽  
I. Halidou ◽  
K. Khirouni ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Properties ◽  
Indium Tin Oxide ◽  
Glass Substrate ◽  
Spray Pyrolysis Technique ◽  
Electrical Conductance ◽  
Average Crystallite Size ◽  
Chemical Spray Pyrolysis ◽  
Electrical Equivalent Circuit ◽  
Ito Glass

Abstract In2S3 thin films were grown on indium tin oxide (ITO) glass substrate by chemical spray pyrolysis technique at 360°C. The structural analysis of the deposited films shows a combination of tetragonal and cubic structures. The average crystallite size is about 25 nm. The electrical properties of In2S3 thin films have been investigated in a wide frequency (40Hz-100MHz) and temperature (400 K-660 K) ranges.We find that the electrical conductance of the In2S3 thin films is frequency and temperature dependent. The dc conductance shows a semi-conductor behavior for In2S3 films over the explored range of temperature and it follows the Arrhenius law with different activation energies. The variation of ac conductance and the frequency exponent `s’ are explained by the correlated barrier hopping (CBH) model. The Nyquist plots of impedance exhibit semicircle arcs and an electrical equivalent circuit has been suggested to interpret the impedance results.

scholarly journals Opto-Electronic Properties of Epoxy/Silicone Blend Based Thin Films

2021 ◽  
Author(s):  
Younes Ziat ◽  
Hamza Belkhanchi ◽  
Maryama Hammi ◽  
Charaf Laghlimi ◽  
A Moutcine
Keyword(s):  
Thin Films ◽  
Indium Tin Oxide ◽  
Optical Transition ◽  
Sol Gel ◽  
Glass Substrates ◽  
Nanostructured Thin Films ◽  
Ito Glass ◽  
Potential Applications ◽  
Optical Applications ◽  
Nitrogen Doped Carbon

Abstract Recently, the rise of two dimensional amorphous nanostructured thin films have ignited a big interest because of their intriguingly isotropic structural and physical properties leading to potential applications in the nano-optoelectronics. However, according to literature, most of optoelectronic properties are investigated on chalcogenides related heterostructures. This has motivated the present work aiming to provide a new platform for the fabrication, examination of the properties and the applications of 2D nanostructured thin films based on epoxy/silicone blend. Thin films of Epoxy/Silicone loaded with nitrogen doped carbon nanotubes (N-CNTs) were prepared by sol-gel method and deposited on Indium Tin Oxide (ITO) glass substrates at room temperature. Further examination of optical properties aimed the investigation of optical pseudo-gap and Urbach energy and enabled the determination of processed films thickness based on Manifacier and Swanepol method. The results indicated that the unloaded thin films have a direct optical transition with a value of 3.61 eV followed by noticeable shift towards narrowing gaps depending on the loading rate. Urbach's energy is 0.19 eV for the unloaded thin films, and varies from 0.43 to 1.33 eV for the loaded thin films with increasing the rate of N-CNTs. It is inversely variable with the optical pseudo-gap. Finally, Epoxy/Silicone loaded with N-CNTs nanocomposites films can be developed as active layers with specific optical characteristics, giving the possibility to be used in electro-optical applications.

scholarly journals Temperature effect on optical properties of nickel (ii) phthalocyanine tetrasulfonic acid tetrasodium salt (NiPcTs) organic thin films

2019 ◽  
Vol 13 (28) ◽  
pp. 44-51
Author(s):  
Ameer F. Abdulameer
Keyword(s):  
Thin Films ◽  
Tin Oxide ◽  
Indium Tin Oxide ◽  
Annealing Temperature ◽  
Optical Band Gap ◽  
Organic Thin Films ◽  
Effect Of Temperature ◽  
Good Information ◽  
Energy Gaps ◽  
Ito Glass

This study describe the effect of temperature on the opticalproperties of nickel(ii) phthalocyanine tetrasulfonic acid tetrasodiumsalt (NiPcTs) organic thin films which are prepared by spin coatingon indium tin oxide (ITO-glass). The optical absorption spectra ofthese thin films are measured. Present studies reveal that the opticalband gap energies of NiPcTs thin films are dependent on theannealing temperatures. The optical band gap decreases with increasein annealing temperature, then increased when the temperature risingto 473K. To enhance the results of Uv-Vis measurements and getmore accurate values of optical energy gaps; the Photoluminescencespectra of as-deposited and annealed NiPcTs thin films was studied.FTIR measurements for NiPcTs thin films also carried out in thiswork and gave good information about the NiPcTs bonds and itslocations as a compared with H2Pc as a reference.

Real-time evolution of electrical properties and structure of indium oxide and indium tin oxide during crystallization

2009 ◽  
Vol 60 (4) ◽  
pp. 199-202 ◽  
Author(s):  
A. Rogozin ◽  
M. Vinnichenko ◽  
N. Shevchenko ◽  
U. Kreissig ◽  
A. Kolitsch ◽  
...  
Keyword(s):  
Electrical Properties ◽  
Real Time ◽  
Time Evolution ◽  
Indium Oxide ◽  
Tin Oxide ◽  
Indium Tin Oxide
Sign in / Sign up

Export Citation Format

Share Document