scholarly journals Empirical Mode Decomposition-Derived Entropy Features Are Beneficial to Distinguish Elderly People with a Falling History on a Force Plate Signal

Entropy ◽  
2021 ◽  
Vol 23 (4) ◽  
pp. 472
Author(s):  
Li-Wei Chou ◽  
Kang-Ming Chang ◽  
Yi-Chun Wei ◽  
Mei-Kuei Lu
Keyword(s):  
Empirical Mode Decomposition ◽  
Fall Risk ◽  
Center Of Pressure ◽  
Force Plate ◽  
Approximate Entropy ◽  
The Elderly ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition ◽  
History Of ◽  
Standard Derivation

Fall risk prediction is an important issue for the elderly. A center of pressure signal, derived from a force plate, is useful for the estimation of body calibration. However, it is still difficult to distinguish elderly people’s fall history by using a force plate signal. In this study, older adults with and without a history of falls were recruited to stand still for 60 s on a force plate. Forces in the x, y and z directions (Fx, Fy, and Fz) and center of pressure in the anteroposterior (COPx) and mediolateral directions (COPy) were derived. There were 49 subjects in the non-fall group, with an average age of 71.67 (standard derivation: 6.56). There were also 27 subjects in the fall group, with an average age of 70.66 (standard derivation: 6.38). Five signal series—forces in x, y, z (Fx, Fy, Fz), COPX, and COPy directions—were used. These five signals were further decomposed with empirical mode decomposition (EMD) with seven intrinsic mode functions. Time domain features (mean, standard derivation and coefficient of variations) and entropy features (approximate entropy and sample entropy) of the original signals and EMD-derived signals were extracted. Results showed that features extracted from the raw COP data did not differ significantly between the fall and non-fall groups. There were 10 features extracted using EMD, with significant differences observed among fall and non-fall groups. These included four features from COPx and two features from COPy, Fx and Fz.

scholarly journals Analysis of Center of Pressure Signals by Using Decision Tree and Empirical Mode Decomposition to Predict Falls among Older Adults

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Fang-Yin Liao ◽  
Chun-Chang Wu ◽  
Yi-Chun Wei ◽  
Li-Wei Chou ◽  
Kang-Ming Chang
Keyword(s):  
Older Adults ◽  
Decision Tree ◽  
Empirical Mode Decomposition ◽  
Center Of Pressure ◽  
Force Plate ◽  
Approximate Entropy ◽  
Training Group ◽  
Median Frequency ◽  
Mode Decomposition ◽  
History Of

Falls put older adults at great risk and are related to the body’s sense of balance. This study investigated how to detect the possibility of high fall risk subjects among older adults. The original signal is based on center of pressure (COP) measured using a force plate. The falling group includes 29 subjects who had a history of falls in the year preceding this study or had received high scores on the Short Falls Efficacy Scale (FES). The nonfalling group includes 47 enrollees with no history of falls and who had received low scores on the Short FES. The COP in both the anterior–posterior and mediolateral direction were calculated and analyzed through empirical mode decomposition (EMD) up to six levels. The following five features were extracted and imported to a decision tree algorithm: root-mean-square deviation, median frequency, total frequency power, approximate entropy, and sample entropy. The results showed that there were a larger number of statistically different feature parameters, and a higher classification of accuracy was obtained. With the aid of empirical mode decomposition, the average classification accuracy increased 10% and achieved a level of 99.74% in the training group and 96.77% in the testing group, respectively.

A method of eliminating the vibration signal noise of hydropower unit based on NA-MEMD and approximate entropy

2016 ◽  
Vol 231 (2) ◽  
pp. 317-328 ◽  
Author(s):  
Xueli An ◽  
Junjie Yang
Keyword(s):  
Empirical Mode Decomposition ◽  
Real World ◽  
Approximate Entropy ◽  
Vibration Signal ◽  
Signal Denoising ◽  
Intrinsic Mode Functions ◽  
Denoising Method ◽  
Multivariate Empirical Mode Decomposition ◽  
Mode Decomposition ◽  
Simulation Signal

A new vibration signal denoising method of hydropower unit based on noise-assisted multivariate empirical mode decomposition (NA-MEMD) and approximate entropy is proposed. Firstly, the NA-MEMD is used to decompose the signal into a number of intrinsic mode functions. Then, the approximate entropy of each component is computed. According to a preset threshold of approximate entropy, these components are reconstructed to denoise vibration signal of hydropower unit. The analysis results of simulation signal and real-world signal show that the proposed method is adaptive and has a good denoising performance. It is very suitable for online denoising of hydropower unit's vibration signal.

scholarly journals A Novel Hybrid Approach for Partial Discharge Signal Detection Based on Complete Ensemble Empirical Mode Decomposition with Adaptive Noise and Approximate Entropy

Entropy ◽  
2020 ◽  
Vol 22 (9) ◽  
pp. 1039 ◽  
Author(s):  
Haikun Shang ◽  
Yucai Li ◽  
Junyan Xu ◽  
Bing Qi ◽  
Jinliang Yin
Keyword(s):  
Empirical Mode Decomposition ◽  
Signal Reconstruction ◽  
Partial Discharge ◽  
Hybrid Approach ◽  
Approximate Entropy ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Fusion Algorithm ◽  
Mode Decomposition ◽  
Adaptive Noise

To eliminate the influence of white noise in partial discharge (PD) detection, we propose a novel method based on complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and approximate entropy (ApEn). By introducing adaptive noise into the decomposition process, CEEMDAN can effectively separate the original signal into different intrinsic mode functions (IMFs) with distinctive frequency scales. Afterward, the approximate entropy value of each IMF is calculated to eliminate noisy IMFs. Then, correlation coefficient analysis is employed to select useful IMFs that represent dominant PD features. Finally, real IMFs are extracted for PD signal reconstruction. On the basis of EEMD, CEEMDAN can further improve reconstruction accuracy and reduce iteration numbers to solve mode mixing problems. The results on both simulated and on-site PD signals show that the proposed method can be effectively employed for noise suppression and successfully extract PD pulses. The fusion algorithm combines the CEEMDAN algorithm and the ApEn algorithm with their respective advantages and has a better de-noising effect than EMD and EEMD.

Multifractal characterization of mechanical vibration signals through improved empirical mode decomposition-based detrended fluctuation analysis

2016 ◽  
Vol 231 (22) ◽  
pp. 4139-4149 ◽  
Author(s):  
Du Wenliao ◽  
Guo Zhiqiang ◽  
Gong Xiaoyun ◽  
Xie Guizhong ◽  
Wang Liangwen ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Detrended Fluctuation Analysis ◽  
Fluctuation Analysis ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Multifractal Detrended Fluctuation Analysis ◽  
Mode Decomposition ◽  
Kolmogorov Smirnov ◽  
Detrended Fluctuation ◽  
Smirnov Test

A novel multifractal detrended fluctuation analysis based on improved empirical mode decomposition for the non-linear and non-stationary vibration signal of machinery is proposed. As the intrinsic mode functions selection and Kolmogorov–Smirnov test are utilized in the detrending procedure, the present approach is quite available for contaminated data sets. The intrinsic mode functions selection is employed to deal with the undesired intrinsic mode functions named pseudocomponents, and the two-sample Kolmogorov–Smirnov test works on each intrinsic mode function and Gaussian noise to detect the noise-like intrinsic mode functions. The proposed method is adaptive to the signal and weakens the effect of noise, which makes this approach work well for vibration signals collected from poor working conditions. We assess the performance of the proposed procedure through the classic multiplicative cascading process. For the pure simulation signal, our results agree with the theoretical results, and for the contaminated time series, the proposed method outperforms the traditional multifractal detrended fluctuation analysis methods. In addition, we analyze the vibration signals of rolling bearing with different fault types, and the presence of multifractality is confirmed.

Ensemble Empirical Mode Decomposition Based Deep Learning Model for Short-Term Wind Power Forecasting

2022 ◽  
Author(s):  
J.M. González-Sopeña
Keyword(s):  
Deep Learning ◽  
Wind Power ◽  
Empirical Mode Decomposition ◽  
Time Series Data ◽  
Ensemble Empirical Mode Decomposition ◽  
Series Data ◽  
Intrinsic Mode Functions ◽  
Wind Power Forecasting ◽  
Mode Decomposition ◽  
Power Forecasting

Abstract. In the last few years, wind power forecasting has established itself as an essential tool in the energy industry due to the increase of wind power penetration in the electric grid. This paper presents a wind power forecasting method based on ensemble empirical mode decomposition (EEMD) and deep learning. EEMD is employed to decompose wind power time series data into several intrinsic mode functions and a residual component. Afterwards, every intrinsic mode function is trained by means of a CNN-LSTM architecture. Finally, wind power forecast is obtained by adding the prediction of every component. Compared to the benchmark model, the proposed approach provides more accurate predictions for several time horizons. Furthermore, prediction intervals are modelled using quantile regression.

scholarly journals Empirical Mode Decomposition in Discrete Time Signals Denoising

2019 ◽  
Vol 16 (1) ◽  
pp. 10-13 ◽  
Author(s):  
Zoltán Germán-Salló
Keyword(s):  
Empirical Mode Decomposition ◽  
Signal To Noise Ratio ◽  
Main Idea ◽  
Discrete Wavelet ◽  
Intrinsic Mode Functions ◽  
Nonlinear Signal Processing ◽  
Mode Decomposition ◽  
Time Signals ◽  
Nonlinear Signal ◽  
Filtering Procedure

Abstract This study explores the data-driven properties of the empirical mode decomposition (EMD) for signal denoising. EMD is an acknowledged procedure which has been widely used for non-stationary and nonlinear signal processing. The main idea of the EMD method is to decompose the analyzed signal into components without using expansion functions. This is a signal dependent representation and provides intrinsic mode functions (IMFs) as components. These are analyzed, through their Hurst exponent and if they are found being noisy components they will be partially or integrally eliminated. This study presents an EMD decomposition-based filtering procedure applied to test signals, the results are evaluated through signal to noise ratio (SNR) and mean square error (MSE). The obtained results are compared with discrete wavelet transform based filtering results.

scholarly journals Texture Feature Extraction Method for Ground Nephogram Based on Hilbert Spectrum of Bidimensional Empirical Mode Decomposition

2014 ◽  
Vol 31 (9) ◽  
pp. 1982-1994 ◽  
Author(s):  
Xiaoying Chen ◽  
Aiguo Song ◽  
Jianqing Li ◽  
Yimin Zhu ◽  
Xuejin Sun ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Recognition Rate ◽  
Texture Feature ◽  
Intrinsic Mode Functions ◽  
Hilbert Spectrum ◽  
Feature Extraction Method ◽  
Hilbert Huang Transform ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Bidimensional Empirical Mode Decomposition

Abstract It is important to recognize the type of cloud for automatic observation by ground nephoscope. Although cloud shapes are protean, cloud textures are relatively stable and contain rich information. In this paper, a novel method is presented to extract the nephogram feature from the Hilbert spectrum of cloud images using bidimensional empirical mode decomposition (BEMD). Cloud images are first decomposed into several intrinsic mode functions (IMFs) of textural features through BEMD. The IMFs are converted from two- to one-dimensional format, and then the Hilbert–Huang transform is performed to obtain the Hilbert spectrum and the Hilbert marginal spectrum. It is shown that the Hilbert spectrum and the Hilbert marginal spectrum of different types of cloud textural images can be divided into three different frequency bands. A recognition rate of 87.5%–96.97% is achieved through random cloud image testing using this algorithm, indicating the efficiency of the proposed method for cloud nephogram.

Spatiotemporal Trend and Variability of Precipitation in Taiwan Based on Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD)

2021 ◽  
Author(s):  
Chun-Hsiang Tang ◽  
Christina W. Tsai
Keyword(s):  
Time Series ◽  
Empirical Mode Decomposition ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Short Term ◽  
Time Frequency ◽  
Spatial Locality ◽  
Temperature And Precipitation ◽  
Mode Decomposition ◽  
Climatic Scenarios

<p>Abstract</p><p>Most of the time series in nature are nonlinear and nonstationary affected by climate change particularly. It is inevitable that Taiwan has also experienced frequent drought events in recent years. However, drought events are natural disasters with no clear warnings and their influences are cumulative. The difficulty of detecting and analyzing the drought phenomenon remains. To deal with the above-mentioned problem, Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD) is introduced to analyze the temperature and rainfall data from 1975~2018 in this study, which is a powerful method developed for the time-frequency analysis of nonlinear, nonstationary time series. This method can not only analyze the spatial locality and temporal locality of signals but also decompose the multiple-dimensional time series into several Intrinsic Mode Functions (IMFs). By the set of IMFs, the meaningful instantaneous frequency and the trend of the signals can be observed. Considering stochastic and deterministic influences, to enhance the accuracy this study also reconstruct IMFs into two components, stochastic and deterministic, by the coefficient of auto-correlation.</p><p>In this study, the influences of temperature and precipitation on the drought events will be discussed. Furthermore, to decrease the significant impact of drought events, this study also attempts to forecast the occurrences of drought events in the short-term via the Artificial Neural Network technique. And, based on the CMIP5 model, this study also investigates the trend and variability of drought events and warming in different climatic scenarios.</p><p> </p><p>Keywords: Multi-dimensional Ensemble Empirical Mode Decomposition (MEEMD), Intrinsic Mode Function(IMF), Drought</p>

scholarly journals Gearbox Fault Diagnosis Using Complementary Ensemble Empirical Mode Decomposition and Permutation Entropy

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Liye Zhao ◽  
Wei Yu ◽  
Ruqiang Yan
Keyword(s):  
Fault Diagnosis ◽  
Empirical Mode Decomposition ◽  
Correlation Coefficients ◽  
Ensemble Empirical Mode Decomposition ◽  
Permutation Entropy ◽  
Support Vector ◽  
Svm Classifier ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Mode Decomposition

This paper presents an improved gearbox fault diagnosis approach by integrating complementary ensemble empirical mode decomposition (CEEMD) with permutation entropy (PE). The presented approach identifies faults appearing in a gearbox system based on PE values calculated from selected intrinsic mode functions (IMFs) of vibration signals decomposed by CEEMD. Specifically, CEEMD is first used to decompose vibration signals characterizing various defect severities into a series of IMFs. Then, filtered vibration signals are obtained from appropriate selection of IMFs, and correlation coefficients between the filtered signal and each IMF are used as the basis for useful IMFs selection. Subsequently, PE values of those selected IMFs are utilized as input features to a support vector machine (SVM) classifier for characterizing the defect severity of a gearbox. Case study conducted on a gearbox system indicates the effectiveness of the proposed approach for identifying the gearbox faults.

Sign in / Sign up

Export Citation Format

Share Document