scholarly journals Area-Efficient Universal Code Generator for Multi-GNSS Receivers

Electronics ◽  
2021 ◽  
Vol 10 (20) ◽  
pp. 2485
Author(s):  
Minsu Kim ◽  
Jiwoon Park ◽  
Gwanghee Jo ◽  
Hoyoung Yoo
Keyword(s):  
High Reliability ◽  
Global Navigation Satellite Systems ◽  
Linear Feedback ◽  
Receiver Design ◽  
Code Generator ◽  
Universal Code ◽  
Satellite Systems ◽  
Code Generators ◽  
Gnss Receivers ◽  
Area Efficient

Although conventional global navigation satellite systems (GNSS) receivers were originally designed for single signals, studies on multi-signal receiver design have recently been actively conducted to achieve high accuracy, precision, and reliability. However, in order for a multi-signal receiver to support various codes, the receiver should support the generation of individual codes. Therefore, the resulting problem of increased complexity must be solved. This paper proposes a hardware structure for an area-efficient linear feedback shift register (LFSR)-based multi-frequency universal code generator. Whereas the existing universal code generators were configured so that feedback polynomials, output registers, and initial values can be selected by placing read-only memories (ROMs), multiplexers (MUXs), and exclusive ORs (XORs) by register bit, in the case of the proposed universal code generator; the circuit was implemented by applying the hardwiring technique to those register bits that have fixed values. According to the results of field programmable gate array (FPGA) implementation, the proposed LFSR-based universal code generator can improve look up table (LUT) by up to 37% and register by up to 78% when compared to conventional code generators, and LUT by up to 36% when compared to the previous universal code generator. Therefore, the proposed universal code generator is a good candidate for implementing multi-frequency receivers to achieve high precision and high reliability.

scholarly journals Multi-GNSS Software Receiver Design Optimization for Accuracy Improvement

2021 ◽  
Vol 9 (9) ◽  
pp. 1467-1476
Author(s):  
Jasmien Hassanien
Keyword(s):  
Multipath Fading ◽  
Least Square ◽  
Global Navigation Satellite Systems ◽  
Receiver Design ◽  
Software Receiver ◽  
Satellite Systems ◽  
Gnss Receivers ◽  
Software Receivers ◽  
Global Navigation Satellite ◽  
Gnss Data

Abstract: Recently, tremendous research has been conducted on Global navigation satellite systems (GNSS) software receivers to better serve the current challenging environments that suffers from multipath fading. Therefore, the development of GNSS receivers has seen a new rush toward a multi-GNSS as a solution for fading problems. In this paper, a multi-GNSS software receiver is designed, optimized, and its performance is presented. The implemented software receiver covers three different signals from two GNSS constellations, namely GPS L1, GPS L2, and Galileo E1. In this paper. the fundamentals of stages of GNSS signal reception (acquisition, tracking, and navigation) are discussed where each stage is customized and optimized for each considered signal and the stage of mutli-GNSS data combination is optimized afterword. The performance of the optimized multi-GNSS software receiver is examined under different combination scenarios where the Least-Square Estimation (LSE) method using precise positioning (PP) algorithms is adopted. Results showed that using multi-GNSS receiver enhances the accuracy of Position, Velocity, and Timing (PVT) solution. Keywords: GNSS, PVT, GPS, Galileo, and accuracy

scholarly journals Area-Efficient Universal Code Generator for GPS L1C and BDS B1C Signals

Electronics ◽  
2021 ◽  
Vol 10 (22) ◽  
pp. 2737
Author(s):  
Jiwoon Park ◽  
Minsu Kim ◽  
Gwanghee Jo ◽  
Hoyoung Yoo
Keyword(s):  
Satellite System ◽  
High Accuracy ◽  
Code Generator ◽  
Universal Code ◽  
Code Generators ◽  
Area Problem ◽  
Legendre Sequence ◽  
Global Navigation Satellite ◽  
Single Receiver ◽  
Area Efficient

Recently, multi-frequency multi-constellation receivers have been actively studied, which are single receivers that process multiple global navigation satellite system (GNSS) signals for high accuracy and reliability. However, in order for a single receiver to process multiple GNSS signals, it requires as many code generators as the number of supported GNSS signals, and this is one of the problems that must be solved in implementing an efficient multi-frequency multi-constellation receiver. This paper proposes an area-efficient universal code generator that can support both GPS L1C signals and BDS B1C signals. The proposed architecture alleviates the area problem by sharing common hardware in a time-multiplex mode without degrading the overall system performance. According to the result of the synthesis using the CMOS 65 nm process, the proposed universal code generator has an area reduced by 98%, 93%, and 60% compared to the previous memory-based universal code generator (MB UCG), the Legendre-generation universal code generator (LG UCG), and the Weil-generation universal code generator (WG UCG), respectively. Furthermore, the proposed generator is applicable to all Legendre sequence-based codes.

scholarly journals Seamless Vehicle Positioning by Lidar-GNSS Integration: Standalone and Multi-Epoch Scenarios

2021 ◽  
Vol 13 (22) ◽  
pp. 4525
Author(s):  
Junjie Zhang ◽  
Kourosh Khoshelham ◽  
Amir Khodabandeh
Keyword(s):  
Autonomous Driving ◽  
Measurement Model ◽  
Urban Environments ◽  
Global Navigation Satellite Systems ◽  
High Definition ◽  
Satellite Systems ◽  
The Road ◽  
Gnss Receivers ◽  
Vehicle Positioning ◽  
Global Navigation Satellite

Accurate and seamless vehicle positioning is fundamental for autonomous driving tasks in urban environments, requiring the provision of high-end measuring devices. Light Detection and Ranging (lidar) sensors, together with Global Navigation Satellite Systems (GNSS) receivers, are therefore commonly found onboard modern vehicles. In this paper, we propose an integration of lidar and GNSS code measurements at the observation level via a mixed measurement model. An Extended Kalman-Filter (EKF) is implemented to capture the dynamic of the vehicle movement, and thus, to incorporate the vehicle velocity parameters into the measurement model. The lidar positioning component is realized using point cloud registration through a deep neural network, which is aided by a high definition (HD) map comprising accurately georeferenced scans of the road environments. Experiments conducted in a densely built-up environment show that, by exploiting the abundant measurements of GNSS and high accuracy of lidar, the proposed vehicle positioning approach can maintain centimeter-to meter-level accuracy for the entirety of the driving duration in urban canyons.

scholarly journals Low cost GNSS receivers in time synchronization systems

2018 ◽  
Vol 67 (1) ◽  
pp. 65-72
Author(s):  
Grzegorz Czopik ◽  
Tomasz Kraszewski
Keyword(s):  
Time Synchronization ◽  
Low Cost ◽  
Global Navigation Satellite Systems ◽  
Satellite Systems ◽  
Time Frequency ◽  
Delay Times ◽  
Gnss Receivers ◽  
Frequency Counter ◽  
The One ◽  
Global Navigation Satellite

The GNSS (GNSS — Global Navigation Satellite Systems) receivers can be utilized to obtain accurate time markers. The preliminary results of the cheap GNSS receivers’ tests are presented in the paper. The one receiver’s price (including antenna) does not exceed 30 $. The studies on the use of receivers in the time synchronization systems were executed. Three identical models of receiver modules were used. The 1PPS (1PPS — 1 Pulse Per Second) signals available on the receiver’s output were used. The 1PPS’s main time characteristics were described. Delay times between different receivers 1PPS signals were measured. Measurements were taken using 1 GHz oscilloscope and precise time/frequency counter T3200U. Keywords: time synchronization, 1PPS, GNSS, GPS time

scholarly journals Linear and Nonlinear Deformation Effects in the Permanent GNSS Network of Cyprus

Sensors ◽  
2020 ◽  
Vol 20 (6) ◽  
pp. 1768
Author(s):  
Chris Danezis ◽  
Miltiadis Chatzinikos ◽  
Christopher Kotsakis
Keyword(s):  
Crustal Deformation ◽  
Global Navigation Satellite Systems ◽  
Satellite Systems ◽  
Time Period ◽  
Position Time Series ◽  
Gnss Receivers ◽  
Linear And Nonlinear ◽  
Gnss Network ◽  
Global Navigation Satellite ◽  
Gnss Data

Permanent Global Navigation Satellite Systems (GNSS) reference stations are well established as a powerful tool for the estimation of deformation induced by man-made or physical processes. GNSS sensors are successfully used to determine positions and velocities over a specified time period, with unprecedented accuracy, promoting research in many safety-critical areas, such as geophysics and geo-tectonics, tackling problems that torment traditional equipment and providing deformation products with absolute accuracy. Cyprus, being located at the Mediterranean fault, exhibits a very interesting geodynamic regime, which has yet to be investigated thoroughly. Accordingly, this research revolves around the estimation of crustal deformation in Cyprus using GNSS receivers. CYPOS (CYprus POsitioning System), a network of seven permanent GNSS stations has been operating since 2008, under the responsibility of the Department of Lands and Surveys. The continuous flow of positioning data collected over this network, offers the required information to investigate the behavior of the crustal deformation field of Cyprus using GNSS sensors for the first time. This paper presents the results of a multi-year analysis (11/2011–01/2017) of daily GNSS data and provides inferences of linear and nonlinear deforming signals into the position time series of the network stations. Specifically, 3D station velocities and seasonal periodic displacements are jointly estimated and presented via a data stacking approach with respect to the IGb08 reference frame.

scholarly journals New GNSS tomography of the atmosphere method – proposal and testing

2012 ◽  
Vol 9 ◽  
pp. 63-76 ◽  
Author(s):  
Michal Kačmařík ◽  
Lukáš Rapant
Keyword(s):  
Water Vapour ◽  
Theoretical Concept ◽  
Global Navigation Satellite Systems ◽  
Satellite Systems ◽  
Gnss Meteorology ◽  
Gnss Receivers ◽  
Tomography Method ◽  
Gnss Measurements ◽  
Global Navigation Satellite

Paper is focused on GNSS meteorology which is generally used for the determination of water vapour distribution in the atmosphere from GNSS measurements. Water vapour in the atmosphere is an important parameter which influences the state and development of the weather. At first, the paper presents basics of the GNSS meteorology and tomography of the atmosphere and subsequently introduces a new GNSS tomography method which doesn't require an extensive network of GNSS receivers, but uses only a few receivers situated in a line. After a theoretical concept describing this method and used mathematical background, the results from a real experiment are shown and discussed. Unfortunately the results indicate that presented method is not able to provide credible outputs. Possibly the main problem lies in an insufficient number of available signals from current global navigation satellite systems (GPS and GLONASS) where the improvement could be expected after the start of Galileo and Compass. Potential ways how to improve the results without increasing the number of satellites are outlined in the last section.

Assessment of geodetic products from Multi-GNSS analyses at the Onsala site

2021 ◽  
Author(s):  
Periklis-Konstantinos Diamantidis ◽  
Grzegorz Kłopotek ◽  
Rüdiger Haas ◽  
Jan Johansson
Keyword(s):  
Global Navigation Satellite Systems ◽  
Observation Data ◽  
International Gnss Service ◽  
Satellite Systems ◽  
Triple Frequency ◽  
Software Packages ◽  
Combined Solution ◽  
Gnss Receivers ◽  
Global Navigation Satellite ◽  
Gnss Data

<p>The dawn of Beidou and Galileo as operational Global Navigation Satellite Systems (GNSS) alongside Global Positioning System (GPS) and GLONASS as well as new features that are now present in all GNSS, such as a triple-frequency setup, create new possibilities concerning improved estimation and assessment of various geodetic products. In particular, the multi-GNSS analysis gives an access to a better sky coverage allowing for improved estimation of zenith wet delays (ZWD) and tropospheric gradients (GRD), and can be used to determine integer phase ambiguities. The Multi-GNSS Experiment (MGEX), as realised by the International GNSS Service (IGS), provides orbit, clock and observation data for all operational GNSS. To take advantage of the new capabilities that these constellations bring, space-geodetic software packages have been retrofitted with Multi-GNSS-compliant modules. Based on this, two software packages, namely GipsyX and c5++, are utilised by way of the static Precise Point Positioning (PPP) approach using six months of data, and an assessment of the derived geodetic products is carried out for several GNSS receivers located at the Onsala core site. More specifically, we perform both single-constellation and multi-GNSS data analysis using Kalman filter and least-squares methods and assess the quality of the derived station positions, ZWD and GRD. A combined solution using all GNSS constellations is carried out and the improvement with respect to station position repeatabilities is assessed for each station. Results from the two software packages are compared with respect to each other and the discrepancies are discussed. Inter-system biases, which homogenise the different time scale that each GNSS operates in, and are necessary for the multi-GNSS combination, are estimated and presented. Finally, the applied inter-system weighting and its impact on the derived geodetic products are discussed.</p>

Assessment of geodetic products from MGEX analyses for the Onsala site

2020 ◽  
Author(s):  
Periklis-Konstantinos Diamantidis ◽  
Grzegorz Klopotek ◽  
Rüdiger Haas
Keyword(s):  
Global Navigation Satellite Systems ◽  
Observation Data ◽  
International Gnss Service ◽  
Satellite Systems ◽  
Troposphere Gradients ◽  
Combined Solution ◽  
Gnss Receivers ◽  
Global Navigation Satellite ◽  
Gnss Data

<div>The emergence of BeiDou and Galileo as operational Global Navigation Satellite Systems (GNSS), in addition to Global Positioning System (GPS) and GLONASS which are already in use, opens up possibilities in delivering geodetic products with higher precision. Apart from ensuring the homogeneity of the derived products, multi-GNSS analysis takes the advantage of new frequencies and an improved sky coverage. This should lead to better phase ambiguity resolution and an improved estimation of target parameters such as zenith wet delays (ZWD), troposphere gradients (GRD) and station positions. The International GNSS Service (IGS) has realised this potential by initiating the Multi-GNSS Experiment (MGEX) which provides orbit, clock and observation data for all operational GNSS. Correspondingly, the multi-technique space geodetic analysis software c5++ has been augmented with a MGEX-compliant GNSS module. Based on this new module and the Precise Point Positioning (PPP) approach using six-month of data, an assessment of the derived geodetic products is carried out for several GNSS receivers located at the Onsala core site. More specifically, we perform both single- and multi-GNSS data analysis using Kalman filter and least-squares methods and assess the quality of the derived station positions, ZWD and GRD. A combined solution using all GNSS together is carried out and the improvement with respect to station position repeatabilities is assessed for each station. Inter-system biases, which homogenise the different time scale that each GNSS operates in and are necessary for the multi-GNSS combination, are estimated and presented. Finally, the applied inter-system weighting is discussed as well as its impact on the derived geodetic products.</div>

scholarly journals MONITOR Ionospheric Network: two case studies on scintillation and electron content variability

2017 ◽  
Vol 35 (3) ◽  
pp. 377-391 ◽  
Author(s):  
Yannick Béniguel ◽  
Iurii Cherniak ◽  
Alberto Garcia-Rigo ◽  
Pierrick Hamel ◽  
Manuel Hernández-Pajares ◽  
...  
Keyword(s):  
Case Studies ◽  
Global Navigation Satellite Systems ◽  
Electron Content ◽  
Satellite Systems ◽  
First Case ◽  
Gnss Receivers ◽  
Recent Phase ◽  
Global Navigation Satellite ◽  
Gnss Data ◽  
High Frequency Sampling

Abstract. The ESA MONITOR network is composed of high-frequency-sampling global navigation satellite systems (GNSS) receivers deployed mainly at low and high latitudes to study ionosphere variability and jointly with global GNSS data and ionospheric processing software in support of the GNSS and its satellite-based augmentation systems (SBAS) like the European EGNOS. In a recent phase of the project, the network was merged with the CNES/ASECNA network and new receivers were added to complement the latter in the western African sector. This paper summarizes MONITOR, presenting two case studies on scintillations (using almost 2 years of data measurements). The first case occurred during the major St. Patrick's Day geomagnetic storm in 2015. The second case study was performed in the last phase of the project, which was supported by ESA EGNOS Project Office, when we paid special attention to extreme events that might degrade the system performance of the European EGNOS.

scholarly journals Determination of orthometric elevations using gnss-derived height with the egm2008 geoid height model

2017 ◽  
Vol 5 (1) ◽  
pp. 13
Author(s):  
Emmanuel Menegbo
Keyword(s):  
Geoid Height ◽  
Global Navigation Satellite Systems ◽  
Satellite Systems ◽  
Maximum Elevation ◽  
Gis Data ◽  
Gnss Receivers ◽  
Orthometric Heights ◽  
Global Navigation Satellite ◽  
The Relationship

The Global navigation satellite systems (GNSS) has imparted positively on civilian positioning & surveying in the horizontal component in Nigeria for the past two decades. The GNSS receivers’ data are longitude, latitude & elevation. However, the vertical distance measurement have not been fully exploited by geodetic and land surveyors. The GNSS derived heights are ellipsoidal elevation. To convert the GNSS elevation to orthometric heights, a geoidal elevation models is needed. The Earth Gravitational Model, 2008 (EGM2008) is a global geoidal models that can be used to obtain GNSS orthometric heights by defining the relationship with the ellipsoid. This work determines GNSS-derived orthometric heights with ellipsoid-geoidal relationship using GPS ellipsoidal heights and EGM2008 geoidal model GIS data. The EGM2008 GIS data was downloaded and interpolated with GPS data to obtain geoidal heights using ArcGIS 10.1. GNSS-derived heights determined with geoid-ellipsoid relationship formula. The result shows minimum elevation of -2.37599m and maximum elevation of 53.8566m.The derived orthometric heights use to create a model in raster format. The orthometric elevation models created useful in all vertical surveying work, construction work and urban planning. The GNSS orthometric heights models need to be compare with spirit levelling and the local geoidal model determined for improve accuracy.

Sign in / Sign up

Export Citation Format

Share Document