scholarly journals Risk-Based Decision Methods for Vehicular Networks

Electronics ◽  
2019 ◽  
Vol 8 (6) ◽  
pp. 627 ◽  
Author(s):  
Riaz Ahmed Shaikh ◽  
Vijey Thayananthan

Vehicular networks play a key role in building intelligent transport systems for smart cities. For the purpose of achieving traffic efficiency, road safety, and traveler comfort, vehicles communicate and collaborate with each other as well as with the fixed infrastructure. In practice, not all vehicles are trustworthy. A faulty or malicious vehicle may forward or share inaccurate or bogus information, which may cause adverse things, such as, road accidents and traffic congestion. Therefore, it is very important to evaluate risk before a vehicle takes any decision. Various risk-based decision systems have already been proposed in the literature. The fuzzy risk-based decision model of vehicular networks is one of them. In this paper, we have proposed various extensions in the fuzzy risk-based decision model to achieve higher robustness, reliability, and completeness. We have presented the theoretical and simulation-based analysis and evaluation of the proposed scheme in a comprehensive manner. In addition, we have analytically cross verified the theoretical and simulation-based results. Qualitative comparison of the proposed scheme has also been presented in this work.

Author(s):  
Mohammed Mouhcine Maaroufi ◽  
Laila Stour ◽  
Ali Agoumi

Managing mobility, both of people and goods, in cities is a thorny issue. The travel needs of urban populations are increasing and put pressure on transport infrastructure. The Moroccan cities are no exception and will struggle, in the short term, to respond to the challenges of the acceleration of the phenomenon of urbanization and the increase in demand for mobility. This will inevitably prevent them from turning into smart cities. The term smart certainly alludes to better use of technologies, but smart mobility is also defined as “a set of coordinated actions intended to improve the efficiency, effectiveness and environmental sustainability of cities” [1]. The term mobility highlights the preponderance of humans over infrastructure and vehicles. Faced with traffic congestion, the solutions currently adopted which consist of fitting out and widening the infrastructures, only encourage more trips and report the problem with more critical consequences. It is true that beyond a certain density of traffic, even Intelligent Transport Systems (ITS) are not useful. The concept of dynamic lane management or Advanced Traffic Management (ATM) opens up new perspectives. Its objective is to manage and optimize road traffic in a variable manner, in space and in time. This article is a summary of the development of a road infrastructure dedicated to Heavy Goods Vehicles (HGV), the first of its kind in Morocco. It aims to avoid the discomfort caused by trucks in the urban road network of the city of Casablanca. This research work is an opportunity to reflect on the introduction of ITS and ATM to ensure optimal use of existing infrastructure before embarking on heavy and irreversible infrastructure projects.


2017 ◽  
Vol 2 (2) ◽  
Author(s):  
Ioannis Kaparias ◽  
Edouard Manassa ◽  
Niv Eden ◽  
Antonios Tsakarestos ◽  
Pierre Schmitz ◽  
...  

In recent research a performance evaluation framework for traffic management and Intelligent Transport Systems was developed, consisting of a set of Key Performance Indicators (KPIs) for the themes of traffic efficiency, safety, pollution reduction and social inclusion, all of which are key components of a smart city. One of the innovative elements of these KPIs is their ability to consider the transport policy layer, in the sense that the evaluation of the suitability and effectiveness of different strategies and ITS options is calculated in relation to the decision-maker’s high-level transport policy rather than objectively. This is achieved through weighting factors, whereby more important policy objectives are weighted more heavily in the calculation. But while the theoretical framework is ready to accommodate the policy layer, no methodology to determine the values of the weighting factors has been developed so far. The present study, therefore, concentrates on the development and testing of such a methodology, focusing on the environmental impact aspect of urban mobility management and ITS in the context of smart cities. The development is based on existing policy objectives and legislation in different cities and countries, while testing is carried out using the purpose-developed CONDUITS_DST software with data from microsimulation models before and after the implementation of a bus priority signalling system in Brussels, Belgium. The results show that the method captures the expected effects, but also that it is able to reflect policy objectives and deliver evaluation results in relation to their alignment with those


2018 ◽  
Vol 4 (10) ◽  
pp. 10
Author(s):  
Ankur Mishra ◽  
Aayushi Priya

Transportation or transport sector is a legal source to take or carry things from one place to another. With the passage of time, transportation faces many issues like high accidents rate, traffic congestion, traffic & carbon emissions air pollution, etc. In some cases, transportation sector faced alleviating the brutality of crash related injuries in accident. Due to such complexity, researchers integrate virtual technologies with transportation which known as Intelligent Transport System. Intelligent Transport Systems (ITS) provide transport solutions by utilizing state-of-the-art information and telecommunications technologies. It is an integrated system of people, roads and vehicles, designed to significantly contribute to improve road safety, efficiency and comfort, as well as environmental conservation through realization of smoother traffic by relieving traffic congestion. This paper aims to elucidate various aspects of ITS - it's need, the various user applications, technologies utilized and concludes by emphasizing the case study of IBM ITS.


Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2308 ◽  
Author(s):  
Can Bıyık

The smart city transport concept is viewed as a future vision aiming to undertake investigations on the urban planning process and to construct policy-pathways for achieving future targets. Therefore, this paper sets out three visions for the year 2035 which bring about a radical change in the level of green transport systems (often called walking, cycling, and public transport) in Turkish urban areas. A participatory visioning technique was structured according to a three-stage technique: (i) Extensive online comprehensive survey, in which potential transport measures were researched for their relevance in promoting smart transport systems in future Turkish urban areas; (ii) semi-structured interviews, where transport strategy suggestions were developed in the context of the possible imaginary urban areas and their associated contextual description of the imaginary urban areas for each vision; (iii) participatory workshops, where an innovative method was developed to explore various creative future choices and alternatives. Overall, this paper indicates that the content of the future smart transport visions was reasonable, but such visions need a considerable degree of consensus and radical approaches for tackling them. The findings offer invaluable insights to researchers inquiring about the smart transport field, and policy-makers considering applying those into practice in their local urban areas.


2021 ◽  
Vol 13 (15) ◽  
pp. 8324
Author(s):  
Viacheslav Morozov ◽  
Sergei Iarkov

Present experience shows that it is impossible to solve the problem of traffic congestion without intelligent transport systems. Traffic management in many cities uses the data of detectors installed at controlled intersections. Further, to assess the traffic situation, the data on the traffic flow rate and its concentration are compared. Latest scientific studies propose a transition from spatial to temporal concentration. Therefore, the purpose of this work is to establish the regularities of the influence of traffic flow concentration in time on traffic flow rate at controlled city intersections. The methodological basis of this study was a systemic approach. Theoretical and experimental studies were based on the existing provisions of system analysis, traffic flow theory, experiment planning, impulses, probabilities, and mathematical statistics. Experimental data were obtained and processed using modern equipment and software: Traficam video detectors, SPECTR traffic light controller, Traficam Data Tool, SPECTR 2.0, AutoCad 2017, and STATISTICA 10. In the course of this study, the authors analyzed the dynamics of changes in the level of motorization, the structure of the motor vehicle fleet, and the dynamics of changes in the number of controlled intersections. As a result of theoretical studies, a hypothesis was put forward that the investigated process is described by a two-factor quadratic multiplicative model. Experimental studies determined the parameters of the developed model depending on the directions of traffic flow, and confirmed its adequacy according to Fisher’s criterion with a probability of at least 0.9. The results obtained can be used to control traffic flows at controlled city intersections.


Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2143
Author(s):  
Sara Paiva ◽  
Mohd Abdul Ahad ◽  
Gautami Tripathi ◽  
Noushaba Feroz ◽  
Gabriella Casalino

The increasing population across the globe makes it essential to link smart and sustainable city planning with the logistics of transporting people and goods, which will significantly contribute to how societies will face mobility in the coming years. The concept of smart mobility emerged with the popularity of smart cities and is aligned with the sustainable development goals defined by the United Nations. A reduction in traffic congestion and new route optimizations with reduced ecological footprint are some of the essential factors of smart mobility; however, other aspects must also be taken into account, such as the promotion of active mobility and inclusive mobility, encouraging the use of other types of environmentally friendly fuels and engagement with citizens. The Internet of Things (IoT), Artificial Intelligence (AI), Blockchain and Big Data technology will serve as the main entry points and fundamental pillars to promote the rise of new innovative solutions that will change the current paradigm for cities and their citizens. Mobility-as-a-service, traffic flow optimization, the optimization of logistics and autonomous vehicles are some of the services and applications that will encompass several changes in the coming years with the transition of existing cities into smart cities. This paper provides an extensive review of the current trends and solutions presented in the scope of smart mobility and enabling technologies that support it. An overview of how smart mobility fits into smart cities is provided by characterizing its main attributes and the key benefits of using smart mobility in a smart city ecosystem. Further, this paper highlights other various opportunities and challenges related to smart mobility. Lastly, the major services and applications that are expected to arise in the coming years within smart mobility are explored with the prospective future trends and scope.


Telecom ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 108-140
Author(s):  
Paulo Álvares ◽  
Lion Silva ◽  
Naercio Magaia

It had been predicted that by 2020, nearly 26 billion devices would be connected to the Internet, with a big percentage being vehicles. The Internet of Vehicles (IoVa) is a concept that refers to the connection and cooperation of smart vehicles and devices in a network through the generation, transmission, and processing of data that aims at improving traffic congestion, travel time, and comfort, all the while reducing pollution and accidents. However, this transmission of sensitive data (e.g., location) needs to occur with defined security properties to safeguard vehicles and their drivers since attackers could use this data. Blockchain is a fairly recent technology that guarantees trust between nodes through cryptography mechanisms and consensus protocols in distributed, untrustful environments, like IoV networks. Much research has been done in implementing the former in the latter to impressive results, as Blockchain can cover and offer solutions to many IoV problems. However, these implementations have to deal with the challenge of IoV node’s resource constraints since they do not suffice for the computational and energy requirements of traditional Blockchain systems, which is one of the biggest limitations of Blockchain implementations in IoV. Finally, these two technologies can be used to build the foundations for smart cities, enabling new application models and better results for end-users.


2020 ◽  
Vol 38 (5/6) ◽  
pp. 997-1011
Author(s):  
Ning Li ◽  
Parthasarathy R. ◽  
Harshila H. Padwal

Purpose Smart mobility is a major guideline in the development of Smart Cities’ transport systems and management. The issue of transition into green, secure and sustainable transport modes, such as using bicycles, should be implemented in this case, along with the subjectivism of management. Design/methodology/approach The proposed technology reflects the Smart Bicycle vehicle model, which tracks cyclists and weather conditions and turns to electric motors in critical circumstances. Findings This reduces the physical load and battery consumption of cyclists which affects the Smart Cities’ ecology positively. Originality/value In Smart Vehicle Bicycle Communication Transport, the vehicle movement optimization technique is used for traffic scenarios to analyze traffic signaling systems that give better results in variable and dense traffic conditions.


2017 ◽  
Vol 18 (1) ◽  
pp. 25-33 ◽  
Author(s):  
Jamal Raiyn

Abstract This paper introduces a new scheme for road traffic management in smart cities, aimed at reducing road traffic congestion. The scheme is based on a combination of searching, updating, and allocation techniques (SUA). An SUA approach is proposed to reduce the processing time for forecasting the conditions of all road sections in real-time, which is typically considerable and complex. It searches for the shortest route based on historical observations, then computes travel time forecasts based on vehicular location in real-time. Using updated information, which includes travel time forecasts and accident forecasts, the vehicle is allocated the appropriate section. The novelty of the SUA scheme lies in its updating of vehicles in every time to reduce traffic congestion. Furthermore, the SUA approach supports autonomy and management by self-regulation, which recommends its use in smart cities that support internet of things (IoT) technologies.


Sign in / Sign up

Export Citation Format

Share Document