Flexibly Extensible Planar Self-Isolated Wideband MIMO Antenna for 5G Communications

Electronics ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 994 ◽  
Author(s):  
Li ◽  
Wei ◽  
Tan ◽  
Lei ◽  
Wu ◽  
...  
Keyword(s):  
Antenna Array ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Potential Candidate ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Element Array ◽  
Large Antenna Array

A planar flexibly extensible multiple-input–multiple-output (MIMO) antenna array with a self-isolation property is proposed. The main characteristics of the proposed array are: (i) no extra isolation structure is required to improve isolation between elements; (ii) elements are arranged with each other with a spacing of 0 mm, (iii) the configuration can be flexibly extended to a large antenna array according to actual requirements. For a test example, the practical processing and testing of an eight-element array is conducted. The tested results demonstrate that the proposed design possesses wide impedance bandwidth (IBW) of 65% and very good isolation (＞18 dB) across the operating bandwidth, which match well with the simulated ones. Moreover, envelope correlation coefficient (ECC) is calculated to valuate MIMO performance; an acceptable ECC (lower than 0.05) suggests that the proposed configuration has good diversity performance and can be a potential candidate for MIMO communications.

Eight-Element Antenna Array for LTE 3.4–3.8 GHz Mobile Handset Applications

Frequenz ◽  
2017 ◽  
Vol 71 (5-6) ◽  
Author(s):  
Lingsheng Yang ◽  
Ming Ji ◽  
Biyu Cheng ◽  
Bo Ni
Keyword(s):  
Antenna Array ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Operating Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Mobile Handset

AbstractIn this letter, an eight-element Multiple-input multiple-output (MIMO) antenna system for LTE mobile handset applications is proposed. The antenna array consists of eight 3D inverted F-shaped antennas (3D-IFA), and the measured –10 dB impedance bandwidth is 3.2–3.9 GHz which can cover the LTE bands 42 and 43 (3.4–3.8 GHz). By controlling the rotation of the antenna elements, no less than 10 dB isolation between antenna elements can be obtained. After using the specially designed meandered slots on the ground as decoupling structures, the measured isolation can be further improved to higher than 13 dB between the antenna elements at the whole operating band.

scholarly journals Design and Analysis of Wideband Flexible Self-Isolating MIMO Antennas for Sub-6 GHz 5G and WLAN Smartphone Terminals

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 3031
Author(s):  
Jayshri Kulkarni ◽  
Abdullah G. Alharbi ◽  
Arpan Desai ◽  
Chow-Yen-Desmond Sim ◽  
Ajay Poddar
Keyword(s):  
Common Ground ◽  
High Efficiency ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Potential Candidate ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A single radiator that is a part of four-port diversity Multiple-Input Multiple-Output (MIMO) antenna design is composed of four octagonal rings embedded between the two opposite sides of a T-shaped conductive layer surrounded by inverted angular edge cut L-shaped and E-shaped structures. The radiators are placed at the four corners with common ground at the center of a smartphone to form a four-element mobile MIMO antenna. The printing of the antenna is carried out on the flexible polyamide substrate (dielectric constant = 3.5 and loss tangent = 0.0027) with dimensions of 70 × 145 × 0.2 mm3. A wide impedance bandwidth of (84.12%) 2.39 to 5.86 GHz is achieved for all four radiators. The compact size of the radiators along with their placement enables the proposed MIMO antenna to occupy much less area while preserving the space for 2G/3G/4G antennas. The placement of the antennas results in self-isolation between antenna elements by achieving isolation greater than 17.5 dB in the desired operating bands. Furthermore, besides showing a high efficiency of 85% and adequate gain above 4 dBi, good diversity performances such as Envelope Correlation Coefficient (ECC) of less than 0.05, Diversity Gain (DG) of above 9.8 dB, Mean Effective Gain (MEG) of −3.1 dB, Channel Capacity of 21.50 bps/Hz, and Total Active Reflection Coefficient (TARC) of below −10 dB are achieved by the flexible MIMO smartphone antenna. The effect of bending along the X and Y-axis on the performance of the proposed MIMO antenna is also analyzed where decent performance is observed. This makes the proposed flexible four-element MIMO antenna a potential candidate to be deployed in future smartphones.

Design of an interlocked four-port MIMO antenna for UWB automotive communications

2021 ◽  
pp. 1-8
Author(s):  
M. Saravanan ◽  
R. Kalidoss ◽  
B. Partibane ◽  
K. S. Vishvaksenan
Keyword(s):  
Multiple Input Multiple Output ◽  
Performance Estimation ◽  
Ultra Wideband ◽  
Antenna Element ◽  
Frequency Range ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Peak Gain

Abstract The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications. The MIMO antenna is constructed using the basic antenna element exploiting a slot geometry. Two such antennas are developed on the same microwave laminate to develop a two-port MIMO antenna. Two such microwave laminates are interlocked to create the four-port MIMO scheme. The most distinct feature of the proposed architecture is that the inter-port isolation is well-taken care without the need for an external decoupling unit. The four-port MIMO antenna has an overall volume of 32 × 15 × 32 mm3. The prototype MIMO antenna is fabricated and the measurements are carried out to validate the simulation results. The antenna offers ultra-wideband (UWB) characteristics covering the frequency range of 2.8–9.5 GHz. The average boresight gain of the antenna ranges from 3.2 to 5.41 dBi with the peak gain at 8 GHz. The simulated efficiency of the antenna is greater than 73% within the operating bandwidth. The MIMO parameters such as envelope correlation coefficient, diversity gain, and mean effective gain are evaluated and presented. The appropriateness of the proposed antenna for deployment in the shark fin housing of the present-day automobiles is verified using on-car performance estimation.

UWB MIMO antenna with common radiator

2016 ◽  
Vol 9 (3) ◽  
pp. 573-580 ◽  
Author(s):  
Garima Srivastava ◽  
B. K. Kanuijia ◽  
Rajeev Paulus
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Mimo Antenna ◽  
Circular Patch ◽  
Capacity Loss ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A compact printed 2 × 2 ultrawideband (UWB) multiple input multiple output (MIMO) antenna with a single circular patch as a common radiator for both the antenna elements is presented in this paper. A single circular patch is excited by two tapered CPW feeds for dual polarization. To improve the isolation between two ports, a rectangular slot of dimension L1 × W1 is created in the radiator. The UWB MIMO antenna has impedance bandwidth of 3–12 GHz with a isolation better than 17 dB between the two ports. The envelope correlation coefficient and the capacity loss are evaluated to ensure the good diversity performance of UWB MIMO antenna. The antenna has a compact size of 45 × 45 mm2 and is fabricated on low cost FR4 substrate and measured using Agilent VNA. The simulated and measured results show that the proposed UWB antenna is good candidate for UWB MIMO applications.

A Superwideband Monopole Multiple-Input-Multiple-Output (MIMO) Antenna with Dual Notched (Inverted T-Shaped Stub/U-Shaped Slit) Band Characteristics for Wireless Applications

2019 ◽  
Vol 16 (10) ◽  
pp. 4242-4248
Author(s):  
Manoj Kapil ◽  
Manish Sharma
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Wireless Applications ◽  
Research Article ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Microstrip Feed

In this research article, a compact MIMO (Multiple-Input-Multiple-Output) antenna with inclusion of two notched bands characteristics is presented. Designed MIMO antenna consist of dual radiating patches printed on one surface of the substrate which covers measured wide impedance bandwidth of 2.88 GHz–19.98 GHz and satisfies bandwidth ratio more than 10:1 for superwideband with compact size of 18 mm × 34 mm. Two radiating patch are placed symmetrically for MIMO configuration and notched bands to eliminate WiMAX/C and WLAN bands are obtained by attaching inverted T-shaped stub on radiating patch and etched inverted U-shape slit in microstrip feed. Isolation between the two radiating patch is maintained by adding two L-shaped stub in slotted rectangular ground plane. Measured radiation pattern are stable in operating band and offers maximum 4.23 dBi and 89% gain and radiation efficiency respectively. Moreover, antenna shows good diversity performance with Envelope-Correlation-Coefficient (ECC) < 0.5, Directive-Gain (DG) > 9.95 dB and Total-Active-Reflection Coefficient (TARC) < -30 dB.

Octagonal-shaped wideband MIMO antenna for human interface device and S-band application

2018 ◽  
Vol 11 (3) ◽  
pp. 287-296 ◽  
Author(s):  
Sanjay Chouhan ◽  
Debendra Kumar Panda ◽  
Vivek Singh Kushwah ◽  
Pankaj Kumar Mishra
Keyword(s):  
Multiple Input Multiple Output ◽  
Wide Band ◽  
Human Head ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Human Interface ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Safety Limit ◽  
Interface Device

AbstractA four-element wide-band octagonal ring-shaped antenna is proposed for human interface device and S-band applications. The isolation structure comprises a parasitic element and a T-shaped structure. The antenna has −10 dB impedance bandwidth 63% (2.1–4.0 GHz) with miniaturized dimension of 54.98 mm × 76 mm. The multiple input multiple output (MIMO) antenna gain is 2.83 dBi at the 2.4 GHz resonant frequency. The designed MIMO has envelop correlation coefficient of 0.026 in the 2:1 VSWR band. The −10 dB total active reflection coefficient bandwidth of 1.2 GHz has been achieved in the entire frequency band, and has MEG value of ≤−3 dB. The specific absorption rate has found below the safety limit near the human head, palm and wrist.

scholarly journals MIMO Antenna Array Design with Polynomial Factorization

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Wen-Qin Wang ◽  
Huaizong Shao ◽  
Jingye Cai
Keyword(s):  
Antenna Array ◽  
Degrees Of Freedom ◽  
Multiple Input Multiple Output ◽  
Factorization Method ◽  
Polynomial Factorization ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Simulation Results ◽  
Array Performance

One of the main advantages of multiple-input multiple-output (MIMO) antenna is that the degrees-of-freedom can be significantly increased by the concept of virtual antenna array, and thus the MIMO antenna array should be carefully designed to fully utilize the virtual antenna array. In this paper, we design the MIMO antenna array with the polynomial factorization method. For a desired virtual antenna array, the polynomial factorization method can optimally design the specified MIMO transmitter and receiver. The array performance is examined by analyzing the degrees-of-freedom and statistical output signal-to-interference-plus-noise ratio (SINR) performance. Design examples and simulation results are provided.

scholarly journals Highly Compact MIMO Antenna System for LTE/ISM Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Lingsheng Yang ◽  
Tao Li ◽  
Su Yan
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Antenna Element ◽  
Radiation Characteristics ◽  
Total Size ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Planar Monopole Antenna

Planar monopole antenna is proposed as the antenna element to form a compact dual-element multiple-input-multiple-output (MIMO) antenna system for LTE2300 (used in Asia and Africa) and ISM band operation. The system can cover a 310 MHz (2.20–2.51 GHz) operating bandwidth, with the total size of 15.5 mm × 18 mm × 1.6 mm. Measured isolation higher than 16 dB is obtained without any specially designed decoupling structures, while the edge-to-edge element spacing is only 7.8 mm (0.08λat 2.20 GHz). Radiation characteristics, correlation coefficient, and the performance of the whole system with a metal sheet and a plastic housing show this system is competitive for practical MIMO applications. The antenna element is further used to build an eight-element MIMO antenna system; also good results are achieved.

Near Zero Parameter Metamaterial Inspired Superstrate for Isolation Improvement in MIMO Wireless Application

Frequenz ◽  
2020 ◽  
Vol 74 (1-2) ◽  
pp. 17-23
Author(s):  
Robert Mark ◽  
Soma Das
Keyword(s):  
Multiple Input Multiple Output ◽  
High Gain ◽  
Antenna System ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Wireless Application ◽  
Measured Impedance ◽  
Edge Separation

AbstractIn this paper, near zero parameter based metamaterial superstrate is presented for mutual coupling reduction in multiple-input-multiple-output (MIMO) antenna. The proposed design offers a peak isolation of 38 dB with edge-separation of 0.042λ0 at resonating frequency. To verify the simulations results, a prototype of the proposed antenna is fabricated and experimentally measured. The two elements MIMO is designed with measured impedance bandwidth of 5.6 to 5.95 GHz with a peak measured gain of 7.4 dBi and efficiency above 95 %.The measurement established an isolation enhancement of 30 dB with minimum correlation coefficient of 0.05 within operating band. The proposed method offers a good design technique for high gain and closely packed MIMO antenna system for WLAN applications.

scholarly journals Design of Quad-Port Ultra-Wideband Multiple-Input-Multiple-Output Antenna with Wide Axial-Ratio Bandwidth

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 1174 ◽  
Author(s):  
Pawan Kumar ◽  
Shabana Urooj ◽  
Areej Malibari
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Axial Ratio ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Good Agreement

This article presents a compact, planar, quad-port ultra-wideband (UWB) multiple-input–multiple-output (MIMO) antenna with wide axial ratio bandwidth (ARBW). The proposed MIMO design consists of four identical square-shaped antenna elements, where each element is made up of a circular slotted ground plane and feed by a 50 Ω microstrip line. The circular polarization is achieved using a protruding hexagonal stub from the ground plane. The four elements of the MIMO antenna are placed orthogonally to each other to obtain high inter-element isolation. FR-4 dielectric substrate of size 45 × 45 × 1.6 mm3 is used for the antenna prototype, and a good agreement is noticed among the simulated and experimental results. The proposed MIMO antenna shows 3-dB ARBW of 52% (3.8–6.5 GHz) and impedance bandwidth (S11 ≤ −10 dB) of 144% (2.2–13.5 GHz).

Sign in / Sign up

Export Citation Format

Share Document