scholarly journals Highly Compact MIMO Antenna System for LTE/ISM Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Lingsheng Yang ◽  
Tao Li ◽  
Su Yan
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Antenna Element ◽  
Radiation Characteristics ◽  
Total Size ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Planar Monopole Antenna

Planar monopole antenna is proposed as the antenna element to form a compact dual-element multiple-input-multiple-output (MIMO) antenna system for LTE2300 (used in Asia and Africa) and ISM band operation. The system can cover a 310 MHz (2.20–2.51 GHz) operating bandwidth, with the total size of 15.5 mm × 18 mm × 1.6 mm. Measured isolation higher than 16 dB is obtained without any specially designed decoupling structures, while the edge-to-edge element spacing is only 7.8 mm (0.08λat 2.20 GHz). Radiation characteristics, correlation coefficient, and the performance of the whole system with a metal sheet and a plastic housing show this system is competitive for practical MIMO applications. The antenna element is further used to build an eight-element MIMO antenna system; also good results are achieved.

Design of an interlocked four-port MIMO antenna for UWB automotive communications

2021 ◽  
pp. 1-8
Author(s):  
M. Saravanan ◽  
R. Kalidoss ◽  
B. Partibane ◽  
K. S. Vishvaksenan
Keyword(s):  
Multiple Input Multiple Output ◽  
Performance Estimation ◽  
Ultra Wideband ◽  
Antenna Element ◽  
Frequency Range ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Peak Gain

Abstract The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications. The MIMO antenna is constructed using the basic antenna element exploiting a slot geometry. Two such antennas are developed on the same microwave laminate to develop a two-port MIMO antenna. Two such microwave laminates are interlocked to create the four-port MIMO scheme. The most distinct feature of the proposed architecture is that the inter-port isolation is well-taken care without the need for an external decoupling unit. The four-port MIMO antenna has an overall volume of 32 × 15 × 32 mm3. The prototype MIMO antenna is fabricated and the measurements are carried out to validate the simulation results. The antenna offers ultra-wideband (UWB) characteristics covering the frequency range of 2.8–9.5 GHz. The average boresight gain of the antenna ranges from 3.2 to 5.41 dBi with the peak gain at 8 GHz. The simulated efficiency of the antenna is greater than 73% within the operating bandwidth. The MIMO parameters such as envelope correlation coefficient, diversity gain, and mean effective gain are evaluated and presented. The appropriateness of the proposed antenna for deployment in the shark fin housing of the present-day automobiles is verified using on-car performance estimation.

Feather-shaped super wideband MIMO antenna

2020 ◽  
pp. 1-9 ◽  
Author(s):  
Sarthak Singhal
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Spatial Diversity ◽  
Antenna Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Rectangular Notch

Abstract Two configurations of a modified feather-shaped antenna element are proposed for super wideband (SWB) multiple-input multiple-output (MIMO) applications. The antenna element geometry comprises of a circular slot-loaded feather-shaped radiator and rectangular notch-loaded quarter elliptical coplanar waveguide ground plane. An operating bandwidth of 4.4–51.5 GHz with inter-port isolation, S21 ≥ 15 dB for spatial diversity configuration, and 3.8–51.5 GHz with S21 ≥ 15 dB in pattern diversity configuration are achieved. The footprints of the antenna configurations are 17 × 33 and 31 × 31 mm2. Both configurations exhibited an envelope correlation coefficient of <−20 dB. The proposed MIMO configurations are fabricated and experimentally validated. The designed antenna configurations are SWB and compact.

scholarly journals A Study of Antenna System for High Order MIMO Device

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
Zhaoliang Chen ◽  
Wen Geyi ◽  
Ming Zhang ◽  
Jun Wang
Keyword(s):  
Multiple Input Multiple Output ◽  
Correlation Coefficients ◽  
Antenna System ◽  
Antenna Element ◽  
Mimo Antenna ◽  
Pattern Diversity ◽  
Multiple Input ◽  
Input Multiple Output ◽  
The Mean ◽  
Antenna Systems

Three types of compact MIMO (Multiple-Input Multiple-Output) antenna systems with four and six elements for mobile handsets are studied in this paper. The MIMO antenna system is built on a FR4 substrate of the dimensions 136 mm × 68.8 mm × 1 mm. The antenna element is a folded planar inverted-F antenna with added resonating branches wound on a small dielectric cube of the dimensions 10 mm × 10 mm × 5 mm, which is the smallest volume so far reported covering the frequency bands 1880 MHz–1920 MHz and 2300 MHz–2620 MHz for GSM1900, LTE2300, 2.4-GHz WLAN, and LTE2500. The effects of element numbers and configurations on the system performance are investigated. More than 10 dB isolations have been achieved by properly designing the antenna elements through the use of the pattern diversity without using decoupling circuits. The envelope correlation coefficients among the elements, the mean effective gains, the efficiencies, and the multiplexing efficiencies of the elements are also discussed.

scholarly journals A Graphene-Assembled Film Based MIMO Antenna Array with High Isolation for 5G Wireless Communication

2021 ◽  
Vol 11 (5) ◽  
pp. 2382
Author(s):  
Rongguo Song ◽  
Xiaoxiao Chen ◽  
Shaoqiu Jiang ◽  
Zelong Hu ◽  
Tianye Liu ◽  
...  
Keyword(s):  
Antenna Array ◽  
Antenna Arrays ◽  
Multiple Input Multiple Output ◽  
Frequency Selective Surface ◽  
Antenna System ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Input Multiple Output ◽  
Alternative Material

With the development of 5G, Internet of Things, and smart home technologies, miniaturized and compact multi-antenna systems and multiple-input multiple-output (MIMO) antenna arrays have attracted increasing attention. Reducing the coupling between antenna elements is essential to improving the performance of such MIMO antenna system. In this work, we proposed a graphene-assembled, as an alternative material rather than metal, film-based MIMO antenna array with high isolation for 5G application. The isolation of the antenna element is improved by a graphene assembly film (GAF) frequency selective surface and isolation strip. It is shown that the GAF antenna element operated at 3.5 GHz has the realized gain of 2.87 dBi. The addition of the decoupling structure improves the isolation of the MIMO antenna array to more than 10 dB and corrects the antenna radiation pattern and operating frequency. The isolation between antenna elements with an interval of 0.4λ is above 25 dB. All experimental results show that the GAF antenna and decoupling structure are efficient devices for 5G mobile communication.

scholarly journals Mutual Coupling Reduction of DRA for MIMO Applications

2019 ◽  
Vol 8 (1) ◽  
pp. 75-81
Author(s):  
N. Al Shalaby ◽  
S. G. El-Sherbiny
Keyword(s):  
Mutual Coupling ◽  
Dielectric Material ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Element Method

In this paper, A multiple input Multiple Output (MIMO) antenna using two Square Dielectric Resonators (SDRs) is introduced. The mutual coupling between the two SDRAs is reduced using two different methods; the first method is based on splitting a spiral slot in the ground plane, then filling the slot with dielectric material, "E.=2.2". The second method is based on inserting a copper parasitic element, having the same shape of the splitted Spiral, between the two SDRAs.  The effect of replacing the copper parasitic element with Carbon nanotubes (CNTs) parasitic element "SOC12 doped long-MWCNT BP" is also studied. The antenna system is designed to operate at 6 GHz. The analysis and simulations are carried out using finite element method (FEM). The defected ground plane method gives a maximum isolation of l8dB at element spacing of 30mm (0.6λo), whereas the parasitic element method gives a maximum isolation of 42.5dB at the same element spacing.

scholarly journals DESIGN AND ANALYSIS OF COMPACT METAMATERIAL MIMO ANTENNA FOR WLAN APPLICATIONS

2019 ◽  
Vol 57 (2) ◽  
pp. 223
Author(s):  
Hoa Nguyen Thi Quynh ◽  
Sy Tuan Tran ◽  
Huu Lam Phan ◽  
Duy Tung Phan
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Split Ring Resonator ◽  
Antenna Element ◽  
Mimo Antenna ◽  
Complementary Split Ring Resonator ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
The Individual

A compact three-port metamaterial multiple-input-multiple-output (MIMO) antenna using complementary split-ring resonator (CSRR) loaded ground have demonstrated in order to miniaturize the size and improve the antenna performance. The antenna is designed on FR4 material and simulated by HFSS software. By loading CSRRs in the ground plane, the size reduction of 77% of the individual patch antenna element is achieved, which appeared to be the major reason for the obtained the compact MIMO antenna. Furthermore, the simulated results show that the proposed MIMO antenna achieves the total gain higher than 5 dB, the isolation less than -11 dB, the envelope correlation coefficient (ECC) value lower than 0.015, and the bandwidth of 100 MHz through the whole WLAN band from 2.4 GHz to 2.484 GHz, indicating promises for WLAN applications.

scholarly journals Dual-Band 2 × 2 MIMO Antenna with Compact Size and High Isolation Based on Half-Mode SIW

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Abubaker Ahmed Elobied ◽  
Xue-Xia Yang ◽  
Ningjie Xie ◽  
Steven Gao
Keyword(s):  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Rectangular Patch ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Proximity Coupling

This paper presents a close-spaced dual-band 2 × 2 multiple-input multiple-output (MIMO) antenna with high isolation based on half-mode substrate integrated waveguide (HMSIW). The dual-band operation of the antenna element is achieved by loading a rectangular patch outside the radiating aperture of an HMSIW cavity. The HMSIW cavity is excited by a coaxial probe, whereas the rectangular patch is energized through proximity coupling by the radiating aperture of HMSIW. The antenna elements can be closely placed using the rotation and orthogonal arrangement for a 2 × 2 array. Small neutralization lines at the center of the MIMO antenna can increase the isolation among its elements by around 10 dB in the lower band and 5 dB in the higher band. A prototype of the MIMO antenna is fabricated and its performance is measured. The measured results show that the resonant frequencies are centered at 4.43 and 5.39 GHz with bandwidths of 110 and 80 MHz and peak gains of 6 and 6.4 dBi, respectively. The minimum isolation in both bands is greater than 35 dB. The envelope correlation coefficient is lower than 0.005 within two operating bands.

scholarly journals Modified U-Shaped Resonator as Decoupling Structure in MIMO Antenna

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1321
Author(s):  
Amjad Iqbal ◽  
Ahsan Altaf ◽  
Mujeeb Abdullah ◽  
Mohammad Alibakhshikenari ◽  
Ernesto Limiti ◽  
...  
Keyword(s):  
Multiple Input Multiple Output ◽  
Equivalent Circuit Model ◽  
Separation Distance ◽  
Antenna System ◽  
Parametric Modelling ◽  
Mimo Antenna ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Simple Assembly

This paper presents an isolation enhancement of two closely packed multiple-input multiple-output (MIMO) antenna system using a modified U-shaped resonator. The modified U-shaped resonator is placed between two closely packed radiating elements resonating at 5.4 GHz with an edge to edge separation distance of 5.82 mm (λ∘/10). Through careful adjustment of parametric modelling, the isolation level of −23 dB among the densely packed elements is achieved. The coupling behaviour of the MIMO elements is analysed by accurately designing the equivalent circuit model in each step. The antenna performance is realized in the presence and absence of decoupling structure, and the results shows negligible effects on the antenna performance apart from mutual coupling. The simple assembly of the proposed modified U-shaped isolating structure makes it useful for several linked applications. The proposed decoupling structure is compact in nature, suppress the undesirable coupling generated by surface wave and nearby fields, and is easy to fabricate.

scholarly journals A High Isolation MIMO Antenna without Decoupling Structure for LTE 700 MHz

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Yanjie Wu ◽  
Yunliang Long
Keyword(s):  
Impedance Matching ◽  
Multiple Input Multiple Output ◽  
Monopole Antenna ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Antenna Performance ◽  
Measurement Results ◽  
Multiple Input ◽  
Input Multiple Output

This paper presents a long-term evolution (LTE) 700 MHz band multiple-input-multiple-output (MIMO) antenna, and high isolation between the two symmetrical antenna elements is obtained without introducing extra decoupling structure. Each antenna element is a combination antenna of PIFA and a meander monopole antenna. The end of the PIFA and the meander monopole antenna are, respectively, overlapped with the 50 Ω microstrip feed line, the two overlapping areas produce additional capacitance which can be considered decoupling structures to enhance the isolation for the MIMO antenna, as well as the impedance matching of the antenna elements. The MIMO antenna is etched on FR4 PCB board with dimensions of 71 × 40 × 1.6 mm3; the edge-to-edge separation of the two antenna elements is only nearly 0.037 λat 700 MHz. Both simulation and measurement results are used to confirm the MIMO antenna performance; the operating bandwidth is 698–750 MHz withS11≤−6 dB andS21≤−23 dB.

scholarly journals Design of a compact hexagonal structured dual band MIMO antenna using orthogonal polarization for WLAN and satellite applications

2019 ◽  
Vol 9 (5) ◽  
pp. 4217
Author(s):  
Aziz Dkiouak ◽  
Mohssine El Ouahabi ◽  
Alia Zakriti ◽  
Mohsine Khalladi ◽  
Aicha Mchbal
Keyword(s):  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Dual Band ◽  
Orthogonal Polarization ◽  
Mimo Antenna ◽  
X Band ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Satellite Applications ◽  
Strip Lines

In this paper, a compact dual band multiple-input multiple-output (MIMO) antenna system for WLAN and X-band satellite applications (2.4/9.8 GHz respectively) is proposed. On the top face of the substrate, two antenna elements with a size of 20 × 24 mm2 are placed side by side and fed with matched orthogonal micro-strip lines. The two antenna elements have orthogonal polarization which can reduce the mutual coupling between its ports. The designed antenna system is fabricated and measured to validate the simulation results. The impedance bandwidths are about 370 MHz (2.19 to 2.56 GHz) and 630 MHz (9.44 to 10.07 GHz), while the obtained isolation is greater than 14 dB at the operating bands. Furthermore, the envelope correlation is less than 0.052 and 0.008 at 2.4 and 9.8 GHz, respectively. Hence the diversity gain is higher than 9.98 in the frequency bands of interest.

Sign in / Sign up

Export Citation Format

Share Document