scholarly journals SmartLVGrid Platform—Convergence of Legacy Low-Voltage Circuits toward the Smart Grid Paradigm

Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2590
Author(s):  
R. Claudio S. Gomes ◽  
Carlos Costa ◽  
Jose Silva ◽  
Jose Sicchar
Keyword(s):  
Smart Grid ◽  
Power Distribution ◽  
Smart Grids ◽  
Low Voltage ◽  
Electric Power System ◽  
Economic Feasibility ◽  
Distribution Grid ◽  
Strategic Plans ◽  
Low Voltage Circuits ◽  
The Cost

The current electrical system is transitioning towards a new technological model called the smart grid. The transition duration between the traditional Electric Power System (EPS) and the full smart grid depends on well-designed strategic plans, implementing transition models that are as close to smart grids as possible, based on the processes and technological resources available at the time, but always considering their economic feasibility, without which no solution thrives. In this article, we present a method for convergence of the traditional power distribution grid to the smart grid paradigm by retrofitting the legacy circuits that compose this grid. Our results indicate that the application of such a method, through a distributed system platform with integrated technological resources added to the legacy infrastructure, converts these passive grids into intelligent circuits capable of supporting the implementation of a smart grid with a broad scope of functionalities. Based on a novel retrofitting strategy, the solution is free from the cost of replacing or significantly modifying the legacy infrastructure, as verified in deploying other currently available solutions.

scholarly journals A Methodology for Dependability Evaluation of Smart Grids

Energies ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1817 ◽  
Author(s):  
Gisliany Alves ◽  
Danielle Marques ◽  
Ivanovitch Silva ◽  
Luiz Affonso Guedes ◽  
Maria da Guia da Silva
Keyword(s):  
Smart Grid ◽  
Power Systems ◽  
Information And Communication Technologies ◽  
Power Distribution ◽  
Smart Grids ◽  
Low Voltage ◽  
Hierarchical Topology ◽  
Automation Systems ◽  
Dependability Evaluation ◽  
Information And Communication

Smart grids are a new trend in electric power distribution, which has been guiding the digitization of electric ecosystems. These smart networks are continually being introduced in order to improve the dependability (reliability, availability) and efficiency of power grid systems. However, smart grids are often complex, composed of heterogeneous components (intelligent automation systems, Information and Communication Technologies (ICT) control systems, power systems, smart metering systems, and others). Additionally, they are organized under a hierarchical topology infrastructure demanded by priority-based services, resulting in a costly modeling and evaluation of their dependability requirements. This work explores smart grid modeling as a graph in order to propose a methodology for dependability evaluation. The methodology is based on Fault Tree formalism, where the top event is generated automatically and encompasses the hierarchical infrastructure, redundant features, load priorities, and failure and repair distribution rates of all components of a smart grid. The methodology is suitable to be applied in early design stages, making possible to evaluate instantaneous and average measurements of reliability and availability, as well as to identify eventual critical regions and components of smart grid. The study of a specific use-case of low-voltage distribution network is used for validation purposes.

scholarly journals An ICT Architecture for Managed Charging of Electric Vehicles in Smart Grid Environments

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
S. Bohn ◽  
M. Agsten ◽  
O. Waldhorst ◽  
A. Mitschele-Thiel ◽  
D. Westermann ◽  
...  
Keyword(s):  
Smart Grid ◽  
Electric Vehicles ◽  
Power Distribution ◽  
Smart Grids ◽  
Power Grids ◽  
Distribution Grid ◽  
Grid Environments ◽  
Information And Communication ◽  
Increasing Demand ◽  
Near Future

Growing shortage of fossil resources and an increasing demand of individual mobility worldwide require technology alternatives to existing mobility solutions. Electric vehicles (EVs) as one possible solution have moved into the focus of research and development. To maximize the positive environmental effect of EVs, it is proposed to charge them with respect to the availability of renewable energies. As the number of EVs will grow in the near future, their impact on the power distribution grid is no longer neglectable. Related research shows that unmanaged charging of EVs could result in overload situations or voltage instabilities. To overcome this, methods are proposed to manage the charging process holistically. Herein EVs become substantial elements of intelligent power grids (Smart Grids). As of today, research in the area of Smart Grids focuses mainly on either energy aspects or communication aspects while neglecting the interoperability of energy and communication related aspects. In this paper, an insight into Information and Communication Technology (ICT) aspects with respect to Managed Charging of EVs in Smart Grid environments will be given. Based on the use case of Managed Charging, requirements will be analyzed, results will be derived, and ICT solutions will be proposed with a set of recommendations for Smart Grid architectures.

scholarly journals Architectural and functional classification of smart grid solutions

2019 ◽  
Vol 2 (S1) ◽  
Author(s):  
Friederike Wenderoth ◽  
Elisabeth Drayer ◽  
Robert Schmoll ◽  
Michael Niedermeier ◽  
Martin Braun
Keyword(s):  
Smart Grid ◽  
Power Systems ◽  
Power System ◽  
Power Distribution ◽  
Hierarchical Architecture ◽  
Distribution Grid ◽  
Active System ◽  
System Operation ◽  
Power System Operation

Abstract Historically, the power distribution grid was a passive system with limited control capabilities. Due to its increasing digitalization, this paradigm has shifted: the passive architecture of the power system itself, which includes cables, lines, and transformers, is extended by a communication infrastructure to become an active distribution grid. This transformation to an active system results from control capabilities that combine the communication and the physical components of the grid. It aims at optimizing, securing, enhancing, or facilitating the power system operation. The combination of power system, communication, and control capabilities is also referred to as a “smart grid”. A multitude of different architectures exist to realize such integrated systems. They are often labeled with descriptive terms such as “distributed,” “decentralized,” “local,” or “central." However, the actual meaning of these terms varies considerably within the research community.This paper illustrates the conflicting uses of prominent classification terms for the description of smart grid architectures. One source of this inconsistency is that the development of such interconnected systems is not only in the hands of classic power engineering but requires input from neighboring research disciplines such as control theory and automation, information and telecommunication technology, and electronics. This impedes a clear classification of smart grid solutions. Furthermore, this paper proposes a set of well-defined operation architectures specialized for use in power systems. Based on these architectures, this paper defines clear classifiers for the assessment of smart grid solutions. This allows the structural classification and comparison between different smart grid solutions and promotes a mutual understanding between the research disciplines. This paper presents revised parts of Chapters 4.2 and 5.2 of the dissertation of Drayer (Resilient Operation of Distribution Grids with Distributed-Hierarchical Architecture. Energy Management and Power System Operation, vol. 6, 2018).

Smart Grid Topologies Paving the Way for an Urban Resilient Continuity Management

2022 ◽  
pp. 1335-1359
Author(s):  
Sadeeb Simon Ottenburger ◽  
Thomas Münzberg ◽  
Misha Strittmatter
Keyword(s):  
Smart Grid ◽  
Power Distribution ◽  
Smart Grids ◽  
Power Flow ◽  
Operation Mode ◽  
Urban Resilience ◽  
Power Distribution Network ◽  
Vast Number ◽  
Adequate Provision ◽  
Advanced Metering

The generation and supply of electricity is currently about to undergo a fundamental transition that includes extensive development of smart grids. Smart grids are huge and complex networks consisting of a vast number of devices and entities which are connected with each other. This opens new variations of disruption scenarios which can increase the vulnerability of a power distribution network. However, the network topology of a smart grid has significant effects on urban resilience particularly referring to the adequate provision of infrastructures. Thus, topology massively codetermines the degree of urban resilience, i.e. different topologies enable different strategies of power distribution. Therefore, this article introduces a concept of criticality adapted to a power system relying on an advanced metering infrastructure. The authors propose a two-stage operationalization of this concept that refers to the design phase of a smart grid and its operation mode, targeting at an urban resilient power flow during power shortage.

scholarly journals Incremental Heuristic Approach for Meter Placement in Radial Distribution Systems

Energies ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3917 ◽  
Author(s):  
Giovanni Artale ◽  
Antonio Cataliotti ◽  
Valentina Cosentino ◽  
Dario Di Cara ◽  
Salvatore Guaiana ◽  
...  
Keyword(s):  
Radial Distribution ◽  
Power Distribution ◽  
Smart Grids ◽  
Distribution Systems ◽  
Low Voltage ◽  
Distribution Network ◽  
Load Flow ◽  
State Variables ◽  
Medium Voltage ◽  
Meter Placement

The evolution of modern power distribution systems into smart grids requires the development of dedicated state estimation (SE) algorithms for real-time identification of the overall system state variables. This paper proposes a strategy to evaluate the minimum number and best position of power injection meters in radial distribution systems for SE purposes. Measurement points are identified with the aim of reducing uncertainty in branch power flow estimations. An incremental heuristic meter placement (IHMP) approach is proposed to select the locations and total number of power measurements. The meter placement procedure was implemented for a backward/forward load flow algorithm proposed by the authors, which allows the evaluation of medium-voltage power flows starting from low-voltage load measurements. This allows the reduction of the overall costs of measurement equipment and setup. The IHMP method was tested in the real 25-bus medium-voltage (MV) radial distribution network of the Island of Ustica (Mediterranean Sea). The proposed method is useful both for finding the best measurement configuration in a new distribution network and also for implementing an incremental enhancement of an existing measurement configuration, reaching a good tradeoff between instrumentation costs and measurement uncertainty.

A Novel Method of Requirement Analysis for Power Communication Access Network

2014 ◽  
Vol 986-987 ◽  
pp. 2091-2094
Author(s):  
Bao Feng ◽  
Yi Lei Lin ◽  
Yang Li ◽  
Chang Qing Zhong ◽  
Kai Liang
Keyword(s):  
Smart Grid ◽  
Power Distribution ◽  
Access Network ◽  
Electric Power System ◽  
Requirement Analysis ◽  
Grid Technology ◽  
Reliable Communication ◽  
Novel Method ◽  
Intelligent Devices ◽  
Smart Grid Technology

With the development of smart grid technology, more and more intelligent devices and applications are accessed into the electric power system, which put forward higher requirements on network communication and monitoring. Power distribution and electricity utilization network directly facing the ultimate power users, is the embodiment of the smart grid in customer aspect. Flexible, efficient and reliable communication network will greatly improve the user experience. The network is commonly referred to as power communication access network. In order to improve the performance of service bearing network, a novel service driven modeling method for requirement analysis is proposed. Furthermore, the paper offers some recommendations for network design.

scholarly journals Effect of Individual Volt/var Control Strategies in LINK-Based Smart Grids with a High Photovoltaic Share

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5641
Author(s):  
Daniel-Leon Schultis ◽  
Albana Ilo
Keyword(s):  
Local Control ◽  
Smart Grids ◽  
Reactive Power ◽  
Low Voltage ◽  
Control Strategies ◽  
Load Flow ◽  
Electric Power System ◽  
Mobility Control ◽  
Holistic View ◽  
Voltage Limit

The increasing share of distributed energy resources aggravates voltage limit compliance within the electric power system. Nowadays, various inverter-based Volt/var control strategies, such as cosφ(P) and Q(U), for low voltage feeder connected L(U) local control and on-load tap changers in distribution substations are investigated to mitigate the voltage limit violations caused by the extensive integration of rooftop photovoltaics. This study extends the L(U) control strategy to X(U) to also cover the case of a significant load increase, e.g., related to e-mobility. Control ensembles, including the reactive power autarky of customer plants, are also considered. All Volt/var control strategies are compared by conducting load flow calculations in a test distribution grid. For the first time, they are embedded into the LINK-based Volt/var chain scheme to provide a holistic view of their behavior and to facilitate systematic analysis. Their effect is assessed by calculating the voltage limit distortion and reactive power flows at different Link-Grid boundaries, the corresponding active power losses, and the distribution transformer loadings. The results show that the control ensemble X(U) local control combined with reactive power self-sufficient customer plants performs better than the cosφ(P) and Q(U) local control strategies and the on-load tap changers in distribution substations.

scholarly journals Review of Voltage and Reactive Power Control Algorithms in Electrical Distribution Networks

Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 58 ◽  
Author(s):  
Daiva Stanelyte ◽  
Virginijus Radziukynas
Keyword(s):  
Smart Grids ◽  
Reactive Power ◽  
Low Voltage ◽  
Distribution Networks ◽  
Power Grids ◽  
Renewable Energy Resources ◽  
Distribution Grid ◽  
Harmonic Compensation ◽  
Distributed Power Generation ◽  
Control Devices

The traditional unidirectional, passive distribution power grids are rapidly developing into bidirectional, interactive, multi-coordinated smart grids that cover distributed power generation along with advanced information communications and electronic power technologies. To better integrate the use of renewable energy resources into the grid, to improve the voltage stability of distribution grids, to improve the grid protection and to reduce harmonics, one needs to select and control devices with adjustable reactive power (capacitor batteries, transformers, and reactors) and provide certain solutions so that the photovoltaic (PV) converters maintain due to voltage. Conventional compensation methods are no longer appropriate, thus developing measures are necessary that would ensure local reactive and harmonic compensation in case an energy quality problem happens in the low voltage distribution grid. Compared to the centralized methods, artificial intelligence (heuristic) methods are able to distribute computing and communication tasks among control devices.

A methodology for smart grid reconfiguration

2017 ◽  
Vol 4 (1) ◽  
pp. 1-9
Author(s):  
Fábio Ricardo de Oliveira Bento ◽  
Wanderley Cardoso Celeste
Keyword(s):  
Quantitative Analysis ◽  
Energy Storage ◽  
Smart Grid ◽  
Smart Grids ◽  
Electric Power System ◽  
Performance Indices ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Generation Capacity ◽  
Storage Energy

In this work, it is presented a methodology for the reconfiguration of smart grids that is applied to a smart grid formed by two microgrids that can be electrically interconnected in contingency situations. Each microgrid is also connected to an Electric Power System (EPS) when operating in the normal state. Moreover, the smart grid includes energy storage devices (batteries) located at strategic points. Serious faults that isolated the microgrids of the EPS and, moreover, considerably reduced the generation capacity of such microgrids are simulated. The proposed methodology is applied to reconfiguration in scenarios involving cooperation between microgrids and/or the use of energy storage devices. Performance indices are also proposed to enable a quantitative analysis for each scenario. It is shown that intelligent cooperation between microgrids and the smart-use storage energy is the best option for reducing the impacts in a contingency scenarios.

Sign in / Sign up

Export Citation Format

Share Document