scholarly journals Hydrothermal Depolymerization of Biorefinery Lignin-Rich Streams: Influence of Reaction Conditions and Catalytic Additives on the Organic Monomers Yields in Biocrude and Aqueous Phase

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1241 ◽  
Author(s):  
Stefano Dell’Orco ◽  
Edoardo Miliotti ◽  
Giulia Lotti ◽  
Andrea Maria Rizzo ◽  
Luca Rosi ◽  
...  

Hydrothermal depolymerization of lignin-rich streams (LRS) from lignocellulosic ethanol was successfully carried out in a lab-scale batch reactors unit. A partial depolymerization into oligomers and monomers was achieved using subcritical water as reaction medium. The influence of temperature (300–350–370 °C) and time (5–10 minutes) was investigated to identify the optimal condition on the monomers yields in the lighter biocrude (BC1) and aqueous phase (AP) fractions, focusing on specific phenolic classes as well as carboxylic acids and alcohols. The effect of base catalyzed reactions (2–4 wt. % of KOH) was compared to the control tests as well as to acid-catalyzed reactions obtained with a biphasic medium of supercritical carbon dioxide (sCO2) and subcritical water. KOH addition resulted in enhanced overall depolymerization without showing a strong influence on the phenolic generation, whereas sCO2 demonstrated higher phenolic selectivity even though no effect was observed on the overall products mass yields. In conclusion, a comparison between two different biocrude collection procedures was carried out in order to understand how the selected chemical extraction mode influences the distribution of compounds between BC1 and AP.

A highly efficient, greener and reusable protocol has been developed for the Biginelli reaction. The biowaste curd water employed as a green solvent as well as catalyst for the synthesis of dihydropyrimidinones derivatives. The soluble organic acid (i.e. lactic acid) responsible for the acidity to curd water which adequately fulfills the purpose of acid catalyzed reaction, where three component coupling of aldehyde, urea and ethyl acetoacetate reacted together in the presence of curd water at a low temperature and yields classical dihydropyrimidinones derivatives. During the reaction, continuous product formation and isolation was observed. The product precipitate was separated by the successive method of filtration. This bio-waste water catalyzed method is highly retrievable and advantageous over the trend of high-temperature Bronsted acid/metal acid catalyzed reactions offering the product. Compared with the classical Biginelli reaction conditions, this new method has the advantage of good yields (76-82%) and short reaction time (2-3 hours)


Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 268
Author(s):  
Valentina I. Simagina ◽  
Anna M. Ozerova ◽  
Oksana V. Komova ◽  
Olga V. Netskina

This review highlights the opportunities of catalytic hydrolysis of NaBH4 with the use of inexpensive and active Co-B catalysts among the other systems of hydrogen storage and generation based on water reactive materials. This process is important for the creation of H2 generators required for the operation of portable compact power devices based on low-temperature proton exchange membrane fuel cells (LT PEM FC). Special attention is paid to the influence of the reaction medium on the formation of active state of Co-B catalysts and the problem of their deactivation in NaBH4 solution stabilized by alkali. The novelty of this review consists in the discussion of basic designs of hydrogen generators based on NaBH4 hydrolysis using cobalt catalysts and the challenges of their integration with LT PEM FC. The potential of using batch reactors in which there is no need to use aggressive alkaline NaBH4 solutions is discussed. Solid-phase compositions or pellets based on NaBH4 and cobalt-containing catalytic additives are proposed, the hydrogen generation from which starts immediately after the addition of water. The review made it possible to formulate the most acute problems, which require new sci-tech solutions.


2019 ◽  
Vol 23 (16) ◽  
pp. 1778-1788 ◽  
Author(s):  
Gurpreet Kaur ◽  
Arvind Singh ◽  
Kiran Bala ◽  
Mamta Devi ◽  
Anjana Kumari ◽  
...  

A simple, straightforward and efficient method has been developed for the synthesis of (E)-3-(arylimino)indolin-2-one derivatives and (E)-2-((4-methoxyphenyl)imino)- acenaphthylen-1(2H)-one. The synthesis of these biologically-significant scaffolds was achieved from the reactions of various substituted anilines and isatins or acenaphthaquinone, respectively, using commercially available, environmentally benign and naturally occurring organic acids such as mandelic acid or itaconic acid as catalyst in aqueous medium at room temperature. Mild reaction conditions, energy efficiency, good to excellent yields, environmentally benign conditions, easy isolation of products, no need of column chromatographic separation and the reusability of reaction media are some of the significant features of the present protocol.


1986 ◽  
Vol 51 (10) ◽  
pp. 2167-2180 ◽  
Author(s):  
Lubor Fišera ◽  
Nadezhda D. Kozhina ◽  
Peter Oravec ◽  
Hans-Joachim Timpe ◽  
Ladislav Štibrányi ◽  
...  

3-Aryl-4-R-carbamoyl-5-hydroxymethylisoxazolines (IV) were synthesized by allowing R-NH2 amines with R = H, CH3, C3H7, C6H5C2H5, and NH2 to act on 3-(X-phenyl)-4-oxo-3a,4,6,6a-tetrahydrofuro[3,4-d]isoxazoles (III) with X = H, 4-CH3, 4-OCH3, 2-OCH3, 4-Cl, 2-Cl, 4-F, 2-F, 4-Br, 4-NO2, and 3-NO2. Exposed to radiation, the substances IV give Z-2-hydroxymethylamino-2-aryl-1-formylacrylamides (V) in good yields. The 4-Cl and 4-F substituted Z-derivatives V isomerize irreversibly to the E-derivatives VI if allowed to stand in solvent; the remaining derivatives V are stable. The quantum yields of the photoreaction are from 0.012 to 0.106 in dependence on the substituent X. In all cases where the compounds IV were used for the preparation of condensed heterocycles in conditions of acid-catalyzed reactions, lactones III were preferentially formed; the action of thionyl chloride on IV results in the formation of chloromethyl derivatives VIII, which do not undergo further cyclization.


Author(s):  
Mizzanoor Rahaman ◽  
M. Shahnawaz Ali ◽  
Khorshada Jahan ◽  
Damon Hinz ◽  
Jawad Bin Belayet ◽  
...  

Author(s):  
Emanuele Moioli ◽  
Leo Schmid ◽  
Peter Wasserscheid ◽  
Hannsjoerg Freund

The kinetics of the acid catalyzed reactions of acetaldehyde ammonia trimer (AAT) and paraldehyde (para) to 2-methyl-5-ethyl pyridine (MEP) in the presence of an acid catalyst were investigated systematically. A...


Holzforschung ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ajinkya More ◽  
Thomas Elder ◽  
Zhihua Jiang

Abstract This review discusses the main factors that govern the oxidation processes of lignins into aromatic aldehydes and acids using hydrogen peroxide. Aromatic aldehydes and acids are produced in the oxidative degradation of lignin whereas mono and dicarboxylic acids are the main products. The stability of hydrogen peroxide under the reaction conditions is an important factor that needs to be addressed for selectively improving the yield of aromatic aldehydes. Hydrogen peroxide in the presence of heavy metal ions readily decomposes, leading to minor degradation of lignin. This degradation results in quinones which are highly reactive towards peroxide. Under these reaction conditions, the pH of the reaction medium defines the reaction mechanism and the product distribution. Under acidic conditions, hydrogen peroxide reacts electrophilically with electron rich aromatic and olefinic structures at comparatively higher temperatures. In contrast, under alkaline conditions it reacts nucleophilically with electron deficient carbonyl and conjugated carbonyl structures in lignin. The reaction pattern in the oxidation of lignin usually involves cleavage of the aromatic ring, the aliphatic side chain or other linkages which will be discussed in this review.


Sign in / Sign up

Export Citation Format

Share Document