scholarly journals Dutch Hybrid Neighbourhoods of 1860–1910 in Heat Transition: The Case Study of Zeeheldenkwartier in The Hague

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5255
Author(s):  
Leo Oorschot
Keyword(s):  
World War I ◽  
The Netherlands ◽  
District Heating ◽  
Clean Energy ◽  
Energy System ◽  
Energy Performance ◽  
Heat Pumps ◽  
Important Conclusion ◽  
The Hague

This paper explores the typo-morphologic characteristics of late 19th century hybrid neighbourhoods in urban regions of The Netherlands and possibilities of a feasible climate neutral energy system in the future. The Zeeheldenkwartier neighbourhood in The Hague is used as a case study. Sustainable Development Goals (SDG) are involved to ensure access to affordable and clean energy (SDG 7) and make cities inclusive, safe, resilient and sustainable (SDG 11). With the 2019 Dutch-Climate-Agreement The Netherlands decided on a neighbourhood approach to the transition from natural gas to a climate neutral energy supply in buildings. Implicit homogeneity in most buildings of neighbourhoods is presupposed, in contrast to older neighbourhoods that were laid out before World War I. These are nowadays heterogenic, attractive, mixed and often protected neighbourhoods because of the quality of the architecture. Establishing a generic energy plan here is a challenge. The foremost important conclusion is the recognition of the architectural and urban quality and features of these kinds of neighbourhoods and to develop specific legislation and rules about insulation, service and energy systems. Another conclusion about the strategy is that one should not rely on a single generic solution but rather apply multiple forms of heat supply over a longer period of time. There is lack of heat and construction capacity. Box-in-box-renovation is best done when people are moving and the house is uninhabited. The tenants of a neighbourhood should oganise, not building owners, and implement legislation and framework for rental apartments. Insulation should be done to mandatory Energy Performance Certificate (EPC) label B or C, adding sound and energy production of heat pumps and district heating.

scholarly journals A Method for Optimizing and Spatially Distributing Heating Systems by Coupling an Urban Energy Simulation Platform and an Energy System Model

Resources ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 52
Author(s):  
Annette Steingrube ◽  
Keyu Bao ◽  
Stefan Wieland ◽  
Andrés Lalama ◽  
Pithon M. Kabiro ◽  
...  
Keyword(s):  
District Heating ◽  
Energy Systems ◽  
Energy System ◽  
Heat Pumps ◽  
Energy Simulation ◽  
Heating Systems ◽  
Optimal Amount ◽  
Urban City ◽  
Urban Energy ◽  
Building Level

District heating is seen as an important concept to decarbonize heating systems and meet climate mitigation goals. However, the decision related to where central heating is most viable is dependent on many different aspects, like heating densities or current heating structures. An urban energy simulation platform based on 3D building objects can improve the accuracy of energy demand calculation on building level, but lacks a system perspective. Energy system models help to find economically optimal solutions for entire energy systems, including the optimal amount of centrally supplied heat, but do not usually provide information on building level. Coupling both methods through a novel heating grid disaggregation algorithm, we propose a framework that does three things simultaneously: optimize energy systems that can comprise all demand sectors as well as sector coupling, assess the role of centralized heating in such optimized energy systems, and determine the layouts of supplying district heating grids with a spatial resolution on the street level. The algorithm is tested on two case studies; one, an urban city quarter, and the other, a rural town. In the urban city quarter, district heating is economically feasible in all scenarios. Using heat pumps in addition to CHPs increases the optimal amount of centrally supplied heat. In the rural quarter, central heat pumps guarantee the feasibility of district heating, while standalone CHPs are more expensive than decentral heating technologies.

scholarly journals Evaluating the Potential Contribution of District Heating to the Flexibility of the Future Italian Power System

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 584
Author(s):  
Chiara Magni ◽  
Sylvain Quoilin ◽  
Alessia Arteconi
Keyword(s):  
Power Systems ◽  
Power System ◽  
Large Scale ◽  
District Heating ◽  
Energy System ◽  
Heat Pumps ◽  
Electricity Sector ◽  
Potential Contribution ◽  
The Future ◽  
Promising Solution

Flexibility is crucial to enable the penetration of high shares of renewables in the power system while ensuring the security and affordability of the electricity dispatch. In this regard, heat–electricity sector coupling technologies are considered a promising solution for the integration of flexible devices such as thermal storage units and heat pumps. The deployment of these devices would also enable the decarbonization of the heating sector, responsible for around half of the energy consumption in the EU, of which 75% is currently supplied by fossil fuels. This paper investigates in which measure the diffusion of district heating (DH) coupled with thermal energy storage (TES) units can contribute to the overall system flexibility and to the provision of operating reserves for energy systems with high renewable penetration. The deployment of two different DH supply technologies, namely combined heat and power units (CHP) and large-scale heat pumps (P2HT), is modeled and compared in terms of performance. The case study analyzed is the future Italian energy system, which is simulated through the unit commitment and optimal dispatch model Dispa-SET. Results show that DH coupled with heat pumps and CHP units could enable both costs and emissions related to the heat–electricity sector to be reduced by up to 50%. DH systems also proved to be a promising solution to grant the flexibility and resilience of power systems with high shares of renewables by significantly reducing the curtailment of renewables and cost-optimally providing up to 15% of the total upward reserve requirements.

scholarly journals Establishment of Key Performance Indicators for Green Building Operations Monitoring—An Application to China Case Study

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 976 ◽  
Author(s):  
Jinqiu Li ◽  
Qingqin Wang ◽  
Hao Zhou
Keyword(s):  
Environmental Quality ◽  
Performance Indicators ◽  
Green Building ◽  
Key Performance Indicators ◽  
Energy System ◽  
Energy Performance ◽  
Operational Performance ◽  
Indoor Environmental Quality ◽  
Evaluation Standards

Released green building evaluation standards for operation stage include a huge number of indicators, which are very comprehensive and systematic. However, the indicators of these standards are very complicated and a large amount of time and manpower are consumed for their evaluation. To evaluate the operational performance of green buildings more practically and efficiently, some studies collect the operational data for part of the indicators (mainly focusing on building energy performance, indoor environmental quality or occupant satisfaction), which are too rough to evaluate the performance of green building. This paper proposed a total of 27 key performance indicators (KPIs) for green building operations monitoring. The number of proposed indicators is much fewer than the evaluation standards, as well as suitable for long-term monitoring, which can dramatically reduce evaluation time and cost. On the other hand, the indicators involving Outdoor environmental quality, Indoor environmental quality, HVAC system, P&D system, Renewable energy system, Total resource consumption and User behavior, which are more comprehensive and systematic than the conventional monitoring studies for operational performance of green building. Firstly, an indicators library for operations monitoring of green building was established based on relevant standards and literature review in this field. Secondly, “SMART” principle and Delphi method were adopted to select the key performance indicators for green building operations monitoring. Different background experts regarding green building industry were chosen to screen the most relevant, accessible and measurable indicators. Subsequently, two projects in China were selected for case study of key performance indicators proposed in this paper for green building operations monitoring to validate the feasibility and advancement.

scholarly journals Analysis of energy signatures and planning of heating and domestic hot water energy use in buildings in Norway

2019 ◽  
Vol 111 ◽  
pp. 06009
Author(s):  
Tymofii Tereshchenko, ◽  
Dmytro Ivanko ◽  
Natasa Nord ◽  
Igor Sartori
Keyword(s):  
Energy Use ◽  
District Heating ◽  
Energy System ◽  
Energy Performance ◽  
Multiple Regression Model ◽  
Hot Water ◽  
Temperature Dependent ◽  
Domestic Hot Water ◽  
Dependent Part ◽  
Energy Signature

Widespread introduction of low energy buildings (LEBs), passive houses, and zero emission buildings (ZEBs) are national target in Norway. In order to achieve better energy performance in these types of buildings and successfully integrate them in energy system, reliable planning and prediction techniques for heat energy use are required. However, the issue of energy planning in LEBs currently remains challenging for district heating companies. This article proposed an improved methodology for planning and analysis of domestic hot water and heating energy use in LEBs based on energy signature method. The methodology was tested on a passive school in Oslo, Norway. In order to divide energy signature curve on temperature dependent and independent parts, it was proposed to use piecewise regression. Each of these parts were analyzed separately. The problem of dealing with outliers and selection of the factors that had impact of energy was considered. For temperature dependent part, the different methods of modelling were compared by statistical criteria. The investigation showed that linear multiple regression model resulted in better accuracy in the prediction than SVM, PLS, and LASSO models. In order to explain temperature independent part of energy signature the hourly profiles of energy use were developed.

scholarly journals Optimization of emission reducing energy retrofits in Finnish apartment buildings

2019 ◽  
Vol 111 ◽  
pp. 03002 ◽  
Author(s):  
Janne Hirvonen ◽  
Juha Jokisalo ◽  
Juhani Heljo ◽  
Risto Kosonen
Keyword(s):  
Heat Pump ◽  
Life Cycle Cost ◽  
District Heating ◽  
Cost Savings ◽  
Cost Effective ◽  
Energy Performance ◽  
Heat Pumps ◽  
Apartment Buildings ◽  
Ground Source ◽  
Reduce Emissions

This study examined the cost-optimality of energy renovation on Finnish apartment buildings of different ages, built according to different energy performance requirements. Multi-objective optimization was utilized to minimize both CO2 emissions and life cycle cost (LCC). IDA-ICE simulations were performed to obtain the hourly heating demand of the buildings. Four building age classes and three heating systems (district heating, exhaust air heat pump and ground-source heat pump) were separately optimized. With district heating, it was possible to reduce emissions by 11%, while also reducing LCC. With heat pumps cost-savings could be achieved while reducing emissions by over 49%. With maximal (not cost-effective) investments, emissions could be reduced by more than 70% in all examined cases. In all cases, the cheapest solutions included solar electricity and sewage heat recovery. In old buildings, window upgrades and additional roof insulation were cost-effective. In new buildings, demand-based ventilation was included in all optimal solutions.

scholarly journals Energy analysis, numerical simulations and intervention proposals for a NZEB industrial building: the “Loccioni Leaf Lab” case study

2021 ◽  
Vol 238 ◽  
pp. 06004
Author(s):  
Ettore Stamponi ◽  
Nicola Lattanzi ◽  
Francesco Giorgini ◽  
Fabio Serpilli ◽  
Sergio Montelpare ◽  
...  
Keyword(s):  
Smart Grid ◽  
High Performance ◽  
Energy Performance ◽  
Heat Pumps ◽  
Weather Data ◽  
Industrial Building ◽  
Dynamic Simulations ◽  
Heating And Cooling ◽  
Energy Consumptions

The object of this paper is the “Loccioni Leaf Lab”, an industrial nZEB connected to a thermal and electric smart grid. Having nZEB buildings connected to a smart grid offers the possibility of maximizing the benefits that can be obtained by optimal regulation of the grid itself, providing excellent economic and energy results. The case study, which hosts offices and workers operating on test benches, features high performance envelope, solar photovoltaic systems, groundwater heat pumps and a hightechnology control and monitoring system. In order to analyse HVAC-related energy consumptions, the building was modelled using DesignBuilder and EnergyPlus software. The annual dynamic simulations for the assessment of building thermal-energy performance were carried out using available monitored weather data (2019). The model was validated according to ASHRAE guidelines, comparing the outputs of the software with data collected and stored by Company internal database. In the validation process, mean indoor air temperatures of several zones and heating and cooling energy consumptions were considered as key outputs. The validated model has then been used to suggest optimization strategies and to analyse the results obtained with proposed interventions in terms of energy saving.

scholarly journals The marginal-cost pricing for a competitive wholesale district heating market: A case study in the Netherlands

Energy ◽  
2019 ◽  
Vol 189 ◽  
pp. 116367 ◽  
Author(s):  
Wen Liu ◽  
Diederik Klip ◽  
William Zappa ◽  
Sytse Jelles ◽  
Gert Jan Kramer ◽  
...  
Keyword(s):  
The Netherlands ◽  
Marginal Cost ◽  
District Heating ◽  
Marginal Cost Pricing

scholarly journals Economic Evaluation and Simulation for the Hasselt Case Study: Thermochemical District Network Technology vs. Alternative Technologies for Heating

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1260
Author(s):  
Muhannad Delwati ◽  
Ahmed Ammar ◽  
Philipp Geyer
Keyword(s):  
Heat Pump ◽  
District Heating ◽  
Heating System ◽  
Energy Performance ◽  
Urban Structure ◽  
Energy Potential ◽  
Environmental Evaluation ◽  
Technology Application ◽  
District Energy

Thermochemical-technology has high potential for utilizing surplus heat from industrial processes and renewables. This paper examines the economic potential and thermochemical-technology behavior at a network level. The city of Hasselt (Belgium), was chosen as a case study for technology application due to its typical mid-European urban structure. An integrated heating system was proposed which transports energy potential from available surplus-heat sources to the demand side over long distances by a thermochemical-district-heating network, which serves for building heating with heat-pump assistance. A dynamic simulation model of the thermochemical-technology was developed using the experiments and Hasselt data to determine the technology’s energy performance. To examine the technology’s feasibility in the context of a large district energy network, an economic and environmental evaluation of the thermochemical-technology was performed. To compare key economic parameters between our integrated technology and other heating systems a sensitivity analysis to identify favorable market-conditions for wider deployment of the proposed technology was performed. The simulations indicated a 72% reduction of heat-pump heating energy usage as a benefit of the thermochemical system. Network pumping-energy and thermochemical-fluid mass were found via simulation to be 80 kWh and 300 tons, respectively. In comparison to domestic-gas-boilers, the proposed technology shows 95% lower carbon emissions, however at 37% higher annualized cost.

scholarly journals Analysis of Cold Air Recirculation in the Evaporators of Large-Scale Air-Source Heat Pumps Using CFD Simulations

Fluids ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 186
Author(s):  
Brice Rogié ◽  
Jonas Kjær Jensen ◽  
Svenn Ole Kjøller Hansen ◽  
Wiebke Brix Markussen
Keyword(s):  
Heat Pump ◽  
Large Scale ◽  
Sudden Change ◽  
District Heating ◽  
Heat Pumps ◽  
Cfd Model ◽  
Additional Energy ◽  
Cold Air ◽  
Air Source Heat Pump

The present study investigates cold air recirculation in the evaporators of large-scale air-source heat pumps. A case study considered a 5 MW air-source heat pump producing heat for district heating. The heat pump comprises 20 horizontal evaporators, where each evaporator is equipped with eight fans. The evaporators were implemented in a CFD model, where the influence of the outdoor wind direction on the recirculation was investigated. Firstly, the air recirculation was analysed with no surrounding obstacles. Secondly, the surrounding building and the real ground topology was included in the CFD model, to analyse their influence on the air recirculation. The results show that recirculation occurs for all wind directions, due to the turbulent behaviour of the flow around the evaporators. The results also show that the presence of a building intensifies the recirculation when it is placed directly upstream of the evaporators due to the presence of vortices in the wake of the building. On the other hand, a ground depression helps to reduce the recirculation by having additional energy dissipation due to the sudden change in the ground direction.

Sign in / Sign up

Export Citation Format

Share Document