scholarly journals Urban-Scale Computational Fluid Dynamics Simulations with Boundary Conditions from Similarity Theory and a Mesoscale Model

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5624
Author(s):  
Demetri Bouris ◽  
Athanasios G. Triantafyllou ◽  
Athina Krestou ◽  
Elena Leivaditou ◽  
John Skordas ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Boundary Conditions ◽  
Similarity Theory ◽  
Weather Prediction ◽  
Scale Model ◽  
Design Parameters ◽  
Vertical Profiles ◽  
Atmospheric Conditions ◽  
Microscale Simulations

Mesoscale numerical weather prediction models usually provide information regarding environmental parameters near urban areas at a spatial resolution of the order of thousands or hundreds of meters, at best. If detailed information is required at the building scale, an urban-scale model is necessary. Proper definition of the boundary conditions for the urban-scale simulation is very demanding in terms of its compatibility with environmental conditions and numerical modeling. Here, steady-state computational fluid dynamics (CFD) microscale simulations of the wind and thermal environment are performed over an urban area of Kozani, Greece, using both the k-ε and k-ω SST turbulence models. For the boundary conditions, instead of interpolating vertical profiles from the mesoscale solution, which is obtained with the atmospheric pollution model (TAPM), a novel approach is proposed, relying on previously developed analytic expressions, based on the Monin Obuhkov similarity theory, and one-way coupling with minimal information from mesoscale indices (Vy = 10 m, Ty = 100 m, L*). The extra computational cost is negligible compared to direct interpolation from mesoscale data, and the methodology provides design phase flexibility, allowing for the representation of discrete urban-scale atmospheric conditions, as defined by the mesoscale indices. The results compared favorably with the common interpolation practice and with the following measurements obtained for the current study: SODAR for vertical profiles of wind speed and a meteorological temperature profiler for temperature. The significance of including the effects of diverse atmospheric conditions is manifested in the microscale simulations, through significant variations (~30%) in the critical building-related design parameters, such as the surface pressure distributions and local wind patterns.

scholarly journals A Simple Transient Poiseuille-Based Approach to Mimic the Womersley Function and to Model Pulsatile Blood Flow

Dynamics ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 9-17
Author(s):  
Andrea Natale Impiombato ◽  
Giorgio La Civita ◽  
Francesco Orlandi ◽  
Flavia Schwarz Franceschini Zinani ◽  
Luiz Alberto Oliveira Rocha ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Blood Flow ◽  
Boundary Conditions ◽  
Quadratic Function ◽  
Pulsatile Blood Flow ◽  
Flow Through ◽  
Simplified Analysis ◽  
Function Models ◽  
Flow Reversals

As it is known, the Womersley function models velocity as a function of radius and time. It has been widely used to simulate the pulsatile blood flow through circular ducts. In this context, the present study is focused on the introduction of a simple function as an approximation of the Womersley function in order to evaluate its accuracy. This approximation consists of a simple quadratic function, suitable to be implemented in most commercial and non-commercial computational fluid dynamics codes, without the aid of external mathematical libraries. The Womersley function and the new function have been implemented here as boundary conditions in OpenFOAM ESI software (v.1906). The discrepancy between the obtained results proved to be within 0.7%, which fully validates the calculation approach implemented here. This approach is valid when a simplified analysis of the system is pointed out, in which flow reversals are not contemplated.

Combining Computational Fluid Dynamics (CFD) and Flow Network Modeling (FNM) for Design of a Multi-Chip Module (MCM) Cold Plate

2013 ◽  
Author(s):  
John Fernandes ◽  
Saeed Ghalambor ◽  
Akhil Docca ◽  
Chris Aldham ◽  
Dereje Agonafer ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Thermal Analysis ◽  
Computational Fluid Dynamics ◽  
Network Modeling ◽  
Computational Time ◽  
Design Parameters ◽  
Cold Plate ◽  
Original Solution ◽  
Flow Network ◽  
Computational Fluid Dynamics Cfd

The objective of the study is to improve on performance of the current liquid cooling solution for a Multi-Chip Module (MCM) through design of a chip-scale cold plate with quick and accurate thermal analysis. This can be achieved through application of Flow Network Modeling (FNM) and Computational Fluid Dynamics (CFD) in an interactive manner. Thermal analysis of the baseline cold plate design is performed using CFD to determine initial improvement in performance as compared to the original solution, in terms of thermal resistance and pumping power. Fluid flow through the solution is modeled using FNM and verified with results from the CFD analysis. In addition, CFD is employed to generate flow impedance curves of non-standard components within the cold plate, which are used as input for the Hardy Cross method in FNM. Using the verified flow network model, design parameters of different components in the cold plate are modified to promote uniform flow distribution to each active region in the chip-scale solution. Analysis of the resultant design using CFD determines additional improvement in performance over the original solution, if available. Thus, through complementary application of FNM and CFD, a robust cold plate can be designed without requiring expensive fabrication of prototypes and with minimal computational time and resources.

Numerical Investigation of Natural Convection in a Mono-Span Greenhouse

2012 ◽  
Author(s):  
Sunita Kruger ◽  
Leon Pretorius
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Natural Convection ◽  
Pitch Angle ◽  
Design Tool ◽  
Design Parameters ◽  
Two Dimensional ◽  
Cfd Model ◽  
Indoor Climate ◽  
Contour Plots

In this paper, the use of computational fluid dynamics is evaluated as a design tool to investigate the indoor climate of a confined greenhouse. The finite volume method using polyhedral cells is used to solve the governing mass, momentum and energy equations. Natural convection in a cavity corresponding to a mono-span venlo-type greenhouse is numerically investigated using Computational Fluid Dynamics. The CFD model is designed so as to simulate the climate above a plant canopy in an actual multi-span greenhouse heated by solar radiation. The aim of this paper is to investigate the influence of various design parameters such as pitch angle and roof asymmetry and on the velocity and temperature patterns inside a confined single span greenhouse heated from below. In the study reported in this paper a two-dimensional CFD model was generated for the mono-span venlo-type greenhouse, and a mesh sensitivity analysis was conducted to determine the mesh independence of the solution. Similar two-dimensional flow patterns were observed in the obtained CFD results as the experimental results reported by Lamrani et al [2]. The CFD model was then modified and used to explore the effect of roof pitch angle and roof asymmetry at floor level on the development of the flow and temperature patterns inside the cavity for various Rayleigh numbers. Results are presented in the form of vector and contour plots. It was found that considerable temperature and velocity gradients were observed in the centre of the greenhouse for each case in the first 40mm above the ground, as well as in the last 24mm close to the roof. Results also indicated that the Rayleigh number did not have a significant impact on the flow and temperature patterns inside the greenhouse, although roof angle and asymmetry did. The current results demonstrate the importance of CFD as a design tool in the case of greenhouse design.

scholarly journals Performance prediction of loop-type wind turbine

2020 ◽  
Vol 12 (2) ◽  
pp. 168781401984047
Author(s):  
Wonyoung Jeon ◽  
Jeanho Park ◽  
Seungro Lee ◽  
Youngguan Jung ◽  
Yeesock Kim ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Wind Turbine ◽  
Experimental Results ◽  
Scale Model ◽  
Dynamics Analysis ◽  
Blockage Ratio ◽  
Horizontal Axis Wind Turbine ◽  
Computational Fluid Dynamics Analysis

An experimental and analytical method to evaluate the performance of a loop-type wind turbine generator is presented. The loop-type wind turbine is a horizontal axis wind turbine with a different shaped blade. A computational fluid dynamics analysis and experimental studies were conducted in this study to validate the performance of the computational fluid dynamics method, when compared with the experimental results obtained for a 1/15 scale model of a 3 kW wind turbine. Furthermore, the performance of a full sized wind turbine is predicted. The computational fluid dynamics analysis revealed a sufficiently large magnitude of external flow field, indicating that no factor influences the flow other than the turbine. However, the experimental results indicated that the wall surface of the wind tunnel significantly affects the flow, due to the limited cross-sectional size of the wind tunnel used in the tunnel test. The turbine power is overestimated when the blockage ratio is high; thus, the results must be corrected by defining the appropriate blockage factor (the factor that corrects the blockage ratio). The turbine performance was corrected using the Bahaj method. The simulation results showed good agreement with the experimental results. The performance of an actual 3 kW wind turbine was also predicted by computational fluid dynamics.

Hydrodynamic Analysis of Macroalgae Local Model Using Computational Fluid Dynamics

2020 ◽  
Author(s):  
Ming Chen ◽  
Solomon C. Yim ◽  
Daniel Cox ◽  
Zhaoqing Yang ◽  
Thomas Mumford
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Current Model ◽  
Global Scale ◽  
Local Scale ◽  
Constant Current ◽  
Scale Model ◽  
Effective Diameter ◽  
Hydrodynamic Coefficients

Abstract In this article, a local scale, fully nonlinear coupled fluid-structural interaction (FSI) sugar kelp model has been developed using a computational fluid dynamics (CFD) method. In this model, to be consistent with available experimental data, the sugar kelp is approximated as elongated rectangles with smoothed isosceles triangles at the ends and a single kelp model with one end fixed in a channel with constant current model is developed. Several different current speeds are simulated, and the resulting drag forces and calculated drag coefficients are validated by comparison with experimental data from the literature. In a previous study, a global scale model was developed using a computational structural dynamics (CSD) method to simulate macroalgae farming system and guide the system configuration design. In the global scale model, the hydrodynamic forces are calculated using Morison’s equation and the kinematics and dynamics of the sugar kelp are simplified and the group of kelps attached to the long line is modeled as a slender structure with the same length and an effective diameter such that the volumes are consistent with the real physical system. This simplified model matches the weight and buoyancy but adjusting the hydrodynamic properties when the general hydrodynamic coefficients are employed. Therefore, optimal hydrodynamic coefficients used in global scale model were determined to obtain the hydrodynamic force more accurately. The validated local scale model is then be applied to determine the hydrodynamic coefficients of the simplified sugar kelp model for global dynamic analysis.

scholarly journals Evaluation of Heat Transfer Performance of a Multi-Disc Sorption Bed Dedicated for Adsorption Cooling Technology

Energies ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4660 ◽  
Author(s):  
Marcin Sosnowski
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Heat Transfer Performance ◽  
Design Parameters ◽  
Transfer Performance ◽  
Sorption Model ◽  
Factors Influencing ◽  
Computational Fluid Dynamics Cfd ◽  
Cooling Technology

The possibility of implementing the innovative multi-disc sorption bed combined with the heat exchanger into the adsorption cooling technology is investigated experimentally and numerically in the paper. The developed in-house sorption model incorporated into the commercial computational fluid dynamics (CFD) code was applied within the analysis. The research allowed to define the design parameters of the proposed type of the sorption bed and correlate them with basic factors influencing the performance of the sorption bed and its dimensions. The designed multi-disc sorption bed is characterized by great scalability and allows to significantly expand the potential installation sites of the adsorption chillers.

Second Stage Optimization of Helical Groove Seals Using Computational Fluid Dynamics to Evaluate the Dependency of Optimized Design on Preswirl

2018 ◽  
Author(s):  
Cori Watson ◽  
Houston Wood
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Power Loss ◽  
Pressure Differential ◽  
Design Parameters ◽  
Working Fluid ◽  
Second Stage ◽  
Trade Offs ◽  
Helical Groove ◽  
Groove Seal

Helical groove seals are non-contacting annular seals used in pumping machinery to increase the efficiency and, in the case of the balance drum, to manage the axial force on the thrust bearing. Prior work has shown that optimization of helical groove seals can reduce the leakage by two thirds given a desired pressure differential or, conversely, can significantly increase the pressure differential across the helical groove seal given a flow rate. This study evaluates the dependency of the optimal helical groove seal design on the inlet preswirl, which is the ratio of the inlet circumferential velocity to the rotor surface speed. To accomplish this goal, second stage optimization from the previously optimized helical groove seal with grooves on the stator and water as the working fluid were conducted at a series of preswirls ranging from −1 to 1. Optimization is performed using ANSYS CFX, a commercial computational fluid dynamics software and mesh independence is confirmed for the baseline case. For each preswirl case, design of experiments for the design parameters of groove width, groove depth, groove spacing, and number of grooves was performed using a Kennard-Stone Algorithm. The optimized solution is interpolated from the simulations run by using multi-factor quadratic regression from the 30 simulations in each optimization and the interpolated solution is simulated for comparison. In addition to evaluating the optimized solution’s dependency on preswirl, the viability of using swirl breaks or swirl promoting inlet passages to improve the overall efficiency of the seal is discussed. Finally, the power loss performance is evaluated for each of the seal designs simulated so that potential trade-offs can be evaluated. Overall, the results show that increasing preswirl can increase the efficiency of the helical groove seal both by improving power loss and by improving leakage.

On the Use of Atmospheric Boundary Conditions for Axial-Flow Compressor Stall Simulations

2004 ◽  
Vol 127 (2) ◽  
pp. 349-351 ◽  
Author(s):  
M. Vahdati ◽  
A. I. Sayma ◽  
C. Freeman ◽  
M. Imregun
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Boundary Conditions ◽  
Hysteresis Loop ◽  
Axial Flow ◽  
Computational Domain ◽  
Computational Fluid Dynamics Cfd ◽  
Fan Blade ◽  
Flow Compressor ◽  
Speed Characteristic

This paper describes a novel way of prescribing computational fluid dynamics (CFD) boundary conditions for axial-flow compressors. The approach is based on extending the standard single passage computational domain by adding an intake upstream and a variable nozzle downstream. Such a route allows us to consider any point on a given speed characteristic by simply modifying the nozzle area, the actual boundary conditions being set to atmospheric ones in all cases. Using a fan blade, it is shown that the method not only allows going past the stall point but also captures the typical hysteresis loop behavior of compressors.

Validation of computational fluid dynamics for deriving weir discharge relationships with scale model experiments and prototype measurements

2017 ◽  
Vol 58 ◽  
pp. 52-61 ◽  
Author(s):  
Petra Van Daal-Rombouts ◽  
Aldo Tralli ◽  
Femke Verhaart ◽  
Jeroen Langeveld ◽  
François Clemens
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Scale Model ◽  
Model Experiments
Sign in / Sign up

Export Citation Format

Share Document