scholarly journals Evaluation of Reservoir Quality and Forecasted Production Variability along a Multi-Fractured Horizontal Well. Part 1: Reservoir Characterization

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6154
Author(s):  
Daniela Becerra ◽  
Christopher R. Clarkson ◽  
Amin Ghanizadeh ◽  
Rafael Pires de Lima ◽  
Farshad Tabasinejad ◽  
...  
Keyword(s):  
Horizontal Well ◽  
Reservoir Characterization ◽  
Water Saturation ◽  
Geometric Approach ◽  
Horizontal Wells ◽  
Reservoir Quality ◽  
Reservoir Properties ◽  
Geomechanical Properties ◽  
Using Data ◽  
Lateral Length

Completion design for horizontal wells is typically performed using a geometric approach where the fracturing stages are evenly distributed along the lateral length of the well. However, this approach ignores the intrinsic vertical and horizontal heterogeneity of unconventional reservoirs, resulting in uneven production from hydraulic fracturing stages. An alternative approach is to selectively complete intervals with similar and superior reservoir quality (RQ) and completion quality (CQ), potentially leading to improved development efficiency. In the current study, along-well reservoir characterization is performed using data from a horizontal well completed in the Montney Formation in western Canada. Log-derived petrophysical and geomechanical properties, and laboratory analyses performed on drill cuttings, are integrated for the purpose of evaluating RQ and CQ variability along the well. For RQ, cutoffs were applied to the porosity (>4%), permeability (>0.0018 mD), and water saturation (<20%), whereas, for CQ, cutoffs were applied to rock strength (<160 Mpa), Young’s Modulus (60–65 GPa), and Poisson’s ratio (<0.26). Based on the observed heterogeneity in reservoir properties, the lateral length of the well can be subdivided into nine segments. Superior RQ and CQ intervals were found to be associated with predominantly (massive) porous siltstone facies; these intervals are regarded as the primary targets for stimulation. In contrast, relatively inferior RQ and CQ intervals were found to be associated with either dolomite-cemented facies or laminated siltstones. The methods developed and used in this study could be beneficial to Montney operators who aim to better predict and target sweet spots along horizontal wells; the approach could also be used in other unconventional plays.

Integrated reservoir characterization of a Utica Shale with focus on sweet spot discrimination

2020 ◽  
Vol 8 (3) ◽  
pp. SM1-SM14
Author(s):  
Jinming Zhu
Keyword(s):  
Reservoir Characterization ◽  
Water Saturation ◽  
Clay Content ◽  
Seismic Inversion ◽  
Reservoir Properties ◽  
Geomechanical Properties ◽  
Utica Shale ◽  
Characterization Study ◽  
Separate Point

Multiclient 3D seismic data were acquired in 2015 in eastern Ohio for reservoir characterization of the Utica Shale consisting of the Utica and Point Pleasant Formations. I attained accurate, high-fidelity acoustic impedance, shear impedance, density, and [Formula: see text], from elastic inversion. These accurate inversion results allow consistent calculation of reservoir and geomechanical properties of the Utica Shale. I found density critically important affecting the accuracy of other reservoir and geomechanical properties. More than a dozen properties in geologic, geomechanical, and reservoir categories were acquired from logs, cores, and seismic inversion, for this integrated reservoir characterization study. These properties include buried depth, formation thickness, mineralogy, density, Young’s modulus, Poisson’s ratio (PR), brittleness, total organic carbon (TOC), porosity, water saturation, permeability, clay content, and natural fractures. A ternary diagram of core samples from 18 wells demonstrates that the Point Pleasant is dominant with calcite, whereas the Utica mainly contains clay. Inverted density clearly divides Point Pleasant as low density from the overlying Utica. Calculated reservoir properties undoubtedly delineate the traditional Utica Shale as two distinctive formations. I calculated that the Utica Formation contains 1%–2% TOC, 3.5%–4.8% porosity, 10%–24% water saturation, and 40%–58% clay content, whereas Point Pleasant contains 3%–4.5% TOC, 5%–9% porosity, 2%–10% water saturation, and 15%–35% clay content. The PR and brittleness clearly separate Point Pleasant from the overlying Utica, with a lower PR and a higher brittleness index in Point Pleasant than in Utica. The higher brittleness in Point Pleasant makes it easier to frac, leading to enhanced permeability. Both formations exhibit spatial variations of reservoir and geomechanical properties. Nevertheless, the underlying Point Pleasant is obviously better than the Utica Shale with favorable reservoir and geomechanical properties for optimal development and production, although Utica is thicker and shallower. The central and southeastern portions of Point Pleasant have the sweetest reservoirs.

scholarly journals An Integrated Microfacies and Well Logs-Based Reservoir Characterization of Yamama Formation, Southern Iraq

2021 ◽  
pp. 3570-3586
Author(s):  
Mohanad M. Al-Ghuribawi ◽  
Rasha F. Faisal
Keyword(s):  
Reservoir Characterization ◽  
Water Saturation ◽  
Effective Porosity ◽  
Well Logs ◽  
Petrophysical Properties ◽  
Reservoir Properties ◽  
Thin Sections ◽  
Porosity And Permeability ◽  
South Of Iraq ◽  
Southern Iraq

     The Yamama Formation includes important carbonates reservoir that belongs to the Lower Cretaceous sequence in Southern Iraq. This study covers two oil fields (Sindbad and Siba) that are distributed Southeastern Basrah Governorate, South of Iraq. Yamama reservoir units were determined based on the study of cores, well logs, and petrographic examination of thin sections that required a detailed integration of geological data and petrophysical properties. These parameters were integrated in order to divide the Yamama Formation into six reservoir units (YA0, YA1, YA2, YB1, YB2 and YC), located between five cap rock units. The best facies association and petrophysical properties were found in the shoal environment, where the most common porosity types were the primary (interparticle) and secondary (moldic and vugs) . The main diagenetic process that occurred in YA0, YA2, and YB1 is cementation, which led to the filling of pore spaces by cement and subsequently decreased the reservoir quality (porosity and permeability). Based on the results of the final digital  computer interpretation and processing (CPI) performed by using the Techlog software, the units YA1 and YB2 have the best reservoir properties. The unit YB2 is characterized by a good effective porosity average, low water saturation, good permeability, and large thickness that distinguish it from other reservoir units.

Factors Controlling Porosity Permeability Relationship for Reservoir Quality Prediction: A Case Study of Malay Basin Reservoir, Malaysia

2021 ◽  
Author(s):  
Fadzlin Hasani Kasim ◽  
Budi Priyatna Kantaatmadja ◽  
Wan Nur Wan M Zainudin ◽  
Amita Ali ◽  
Hasnol Hady Ismail ◽  
...  
Keyword(s):  
Reservoir Characterization ◽  
Visual Analysis ◽  
Mineral Dissolution ◽  
Rock Properties ◽  
Reservoir Quality ◽  
Hydrocarbon Potential ◽  
Lower Grade ◽  
Reservoir Properties ◽  
Reservoir Evaluation ◽  
Porosity And Permeability

Abstract Predicting the spatial distribution of rock properties is the key to a successful reservoir evaluation for hydrocarbon potential. However, a reservoir with a complex environmental setting (e.g. shallow marine) becomes more challenging to be characterized due to variations of clay, grain size, compaction, cementation, and other diagenetic effects. The assumption of increasing permeability value with an increase of porosity may not be always the case in such an environment. This study aims to investigate factors controlling the porosity and permeability relationships at Lower J Reservoir of J20, J25, and J30, Malay Basin. Porosity permeability values from routine core analysis were plotted accordingly in four different sets which are: lithofacies based, stratigraphic members based, quartz volume-based, and grain-sized based, to investigate the trend in relating porosity and permeability distribution. Based on petrographical studies, the effect of grain sorting, mineral type, and diagenetic event on reservoir properties was investigated and characterized. The clay type and its morphology were analyzed using X-ray Diffractometer (XRD) and Spectral electron microscopy. Results from porosity and permeability cross-plot show that lithofacies type play a significant control on reservoir quality. It shows that most of the S1 and S2 located at top of the plot while lower grade lithofacies of S41, S42, and S43 distributed at the middle and lower zone of the plot. However, there are certain points of best and lower quality lithofacies not located in the theoretical area. The detailed analysis of petrographic studies shows that the diagenetic effect of cementation and clay coating destroys porosity while mineral dissolution improved porosity. A porosity permeability plot based on stratigraphic members showed that J20 points located at the top indicating less compaction effect to reservoir properties. J25 and J30 points were observed randomly distributed located at the middle and bottom zone suggesting that compaction has less effect on both J25 and J30 sands. Lithofacies description that was done by visual analysis through cores only may not correlate-able with rock properties. This is possibly due to the diagenetic effect which controls porosity and permeability cannot visually be seen at the core. By incorporating petrographical analysis results, the relationship between porosity, permeability, and lithofacies can be further improved for better reservoir characterization. The study might change the conventional concept that lower quality lithofacies does not have economic hydrocarbon potential and unlock more hydrocarbon-bearing reserves especially in these types of environmental settings.

scholarly journals Formation evaluation and reservoir characteristics of the Messinian Abu Madi sandstones in Faraskour Gas Field, onshore Nile Delta, Egypt

2020 ◽  
Author(s):  
Mahmoud Leila ◽  
Ali Eslam ◽  
Asmaa Abu El-Magd ◽  
Lobna Alwaan ◽  
Ahmed Elgendy
Keyword(s):  
Water Saturation ◽  
Nile Delta ◽  
Hydrocarbon Exploration ◽  
The Other ◽  
Reservoir Rock ◽  
Reservoir Quality ◽  
Pore System ◽  
Reservoir Properties ◽  
Gas Field ◽  
Irreducible Water Saturation

Abstract The Messinian Abu Madi Formation represents the most prospective reservoir target in the Nile Delta. Hydrocarbon exploration endeavors in Nile Delta over the last few decades highlighted some uncertainties related to the predictability and distribution of the Abu Madi best reservoir quality facies. Therefore, this study aims at delineating the factors controlling the petrophysical heterogeneity of the Abu Madi reservoir facies in Faraskour Field, northeastern onshore part of the Nile Delta. This work provides the very first investigation on the reservoir properties of Abu Madi succession outside the main canyon system. In the study area, Abu Madi reservoir is subdivided into two sandstone units (lower fluvial and upper estuarine). Compositionally, quartzose sandstones (quartz > 65%) are more common in the fluvial unit, whereas the estuarine sandstones are often argillaceous (clays > 15%) and glauconitic (glauconite > 10%). The sandstones were classified into four reservoir rock types (RRTI, RRTII, RRTIII, and RRTIV) having different petrophysical characteristics and fluid flow properties. RRTI hosts the quartzose sandstones characterized by mega pore spaces (R35 > 45 µm) and a very well-connected, isotropic pore system. On the other side, RRTIV constitutes the lowest reservoir quality argillaceous sandstones containing meso- and micro-sized pores (R35 > 5 µm) and a pore system dominated by dead ends. Irreducible water saturation increases steadily from RRTI (Swir ~ 5%) to RRTIV (Swir > 20%). Additionally, the gas–water two-phase co-flowing characteristics decrease significantly from RRTI to RRTIV facies. The gaseous hydrocarbons will be able to flow in RRTI facies even at water saturation values exceeding 90%. On the other side, the gas will not be able to displace water in RRTIV sandstones even at water saturation values as low as 40%. Similarly, the influence of confining pressure on porosity and permeability destruction significantly increases from RRTI to RRTIV. Accordingly, RRTI facies are the best reservoir targets and have high potentiality for primary porosity preservation.

scholarly journals Hydrocarbon reservoir characterization of “Otan-Ile” field, Niger Delta

2021 ◽  
Vol 11 (2) ◽  
pp. 601-615
Author(s):  
Tokunbo Sanmi Fagbemigun ◽  
Michael Ayu Ayuk ◽  
Olufemi Enitan Oyanameh ◽  
Opeyemi Joshua Akinrinade ◽  
Joel Olayide Amosun ◽  
...  
Keyword(s):  
Niger Delta ◽  
Reservoir Characterization ◽  
Water Saturation ◽  
Structural Deformation ◽  
Well Log ◽  
Reservoir Properties ◽  
Good Tool ◽  
Log Data ◽  
Hydrocarbon Reservoir ◽  
Hydrocarbon Saturation

AbstractOtan-Ile field, located in the transition zone Niger Delta, is characterized by complex structural deformation and faulting which lead to high uncertainties of reservoir properties. These high uncertainties greatly affect the exploration and development of the Otan-Ile field, and thus require proper characterization. Reservoir characterization requires integration of different data such as seismic and well log data, which are used to develop proper reservoir model. Therefore, the objective of this study is to characterize the reservoir sand bodies across the Otan-Ile field and to evaluate the petrophysical parameters using 3-dimension seismic and well log data from four wells. Reservoir sands were delineated using combination of resistivity and gamma ray logs. The estimation of reservoir properties, such as gross thickness, net thickness, volume of shale, porosity, water saturation and hydrocarbon saturation, were done using standard equations. Two horizons (T and U) as well as major and minor faults were mapped across the ‘Otan-Ile’ field. The results show that the average net thickness, volume of shale, porosity, hydrocarbon saturation and permeability across the field are 28.19 m, 15%, 37%, 71% and 26,740.24 md respectively. Two major faults (F1 and F5) dipping in northeastern and northwestern direction were identified. The horizons were characterized by structural closures which can accommodate hydrocarbon were identified. Amplitude maps superimposed on depth-structure map also validate the hydrocarbon potential of the closures on it. This study shows that the integration of 3D seismic and well log data with seismic attribute is a good tool for proper hydrocarbon reservoir characterization.

scholarly journals Petrophysics Analysis for Reservoir Characterization of Upper Plover Formation in the Field “A”, Bonaparte Basin, Offshore Timor, Maluku, Indonesia

2016 ◽  
Vol 1 (1) ◽  
pp. 43 ◽  
Author(s):  
Sugeng Sapto Surjono ◽  
Indra Arifianto
Keyword(s):  
Reservoir Characterization ◽  
Water Saturation ◽  
Reservoir Rock ◽  
Reservoir Properties ◽  
Core Data ◽  
Class A ◽  
Rock Types ◽  
Rock Typing ◽  
Volume Porosity ◽  
Potential Reservoir

Hydrocarbon potential within Upper Plover Formation in the Field “A” has not been produced due to unclear in understanding of reservoir problem. This formation consists of heterogeneous reservoir rock with their own physical characteristics. Reservoir characterization has been done by applying rock typing (RT) method utilizing wireline logs data to obtain reservoir properties including clay volume, porosity, water saturation, and permeability. Rock types are classified on the basis of porosity and permeability distribution from routines core analysis (RCAL) data. Meanwhile, conventional core data is utilized to depositional environment interpretations. This study also applied neural network methods to rock types analyze for intervals reservoir without core data. The Upper Plover Formation in the study area indicates potential reservoir distributes into 7 parasequences. Their were deposited during transgressive systems in coastal environments (foreshore - offshore) with coarsening upward pattern during Middle to Late Jurassic. The porosity of reservoir ranges from 1–19 % and permeability varies from 0.01 mD to 1300 mD. Based on the facies association and its physical properties from rock typing analysis, the reservoir within Upper Plover Formation can be grouped into 4 reservoir class: Class A (Excellent), Class B (Good), Class C (Poor), and Class D (Very Poor). For further analysis, only class A-C are considered as potential reservoir, and the remain is neglected.

scholarly journals The Evaluation of Reservoir Quality of Mishrif Formation in South and North Domes of Buzurgan Oil Field

2019 ◽  
Vol 9 (4) ◽  
pp. 89-106
Author(s):  
Ali Duair Jaafar ◽  
Dr. Medhat E. Nasser
Keyword(s):  
Physical Properties ◽  
Water Saturation ◽  
Oil Field ◽  
Reservoir Quality ◽  
Petrophysical Properties ◽  
The South ◽  
Reservoir Properties ◽  
Formation Evaluation ◽  
The North

Buzurgan field in the most cases regards important Iraqi oilfield, and Mishrif Formation is the main producing reservoir in this field, the necessary of so modern geophysical studies is necessity for description and interpret the petrophysical properties in this field. Formation evaluation has been carried out for Mishrif Formation of the Buzurgan oilfield depending on logs data. The available logs data were digitized by using Neuralog software. A computer processed interpretation (CPI) was done for each one of the studied wells from south and north domes using Techlog software V2015.3 in which the porosity, water saturation, and shale content were calculated. And they show that MB21 reservoir unit has the highest thickness, which ranges between (69) m in north dome to (83) m in south dome, and the highest porosity, between (0.06 - 0.16) in the north dome to (0.05 -0.21) in the south dome. The water saturation of this unit ranges between (25% -60%) in MB21 of north dome. It also appeared that the water saturation in the unit MB21 of south dome has the low value, which is between (16% - 25%). From correlation, the thickness of reservoir unit MB21 increases towards the south dome, while the thickness of the uppermost barrier of Mishrif Formation increases towards the north dome. The reservoir unit MB21 was divided into 9 layers due to its large thickness and its important petrophysical characterization. The distribution of petro physical properties (porosity and water saturation) has shown that MB 21 has good reservoir properties.

scholarly journals Integrated reservoir characterization and quality analysis of the carbonate rock types, case study, southern Iraq

2020 ◽  
Vol 10 (8) ◽  
pp. 3157-3177 ◽  
Author(s):  
Sameer Noori Ali Al-Jawad ◽  
Muhammad Abd Ahmed ◽  
Afrah Hassan Saleh
Keyword(s):  
Reservoir Characterization ◽  
Water Saturation ◽  
Rock Type ◽  
High Water ◽  
Quality Analysis ◽  
Reservoir Quality ◽  
High Porosity ◽  
Rock Types ◽  
Porosity And Permeability ◽  
Medium Porosity

Abstract The reservoir characterization and rock typing is a significant tool in performance and prediction of the reservoirs and understanding reservoir architecture, the present work is reservoir characterization and quality Analysis of Carbonate Rock-Types, Yamama carbonate reservoir within southern Iraq has been chosen. Yamama Formation has been affected by different digenesis processes, which impacted on the reservoir quality, where high positively affected were: dissolution and fractures have been improving porosity and permeability, and destructive affected were cementation and compaction, destroyed the porosity and permeability. Depositional reservoir rock types characterization has been identified depended on thin section analysis, where six main types of microfacies have been recognized were: packstone-grainstone, packstone, wackestone-packstone, wackestone, mudstone-wackestone, and mudstone. By using flow zone indicator, four groups have been defined within Yamama Formation, where the first type (FZI-1) represents the bad quality of the reservoir, the second type (FZI-2) is characterized by the intermediate quality of the reservoir, third type (FZI-3) is characterized by good reservoir quality, and the fourth type (FZI-4) is characterized by good reservoir quality. Six different rock types were identified by using cluster analysis technique, Rock type-1 represents the very good type and characterized by low water Saturation and high porosity, Rock type-2 represents the good rock type and characterized by low water saturation and medium–high porosity, Rock type-3 represents intermediate to good rock type and characterized by low-medium water saturation and medium porosity, Rock type-4 represents the intermediate rock type and characterized by medium water saturation and low–medium porosity, Rock type-5 represents intermediate to bad rock type and characterized by medium–high water saturation and medium–low porosity, and Rock type-6 represents bad rock type and characterized by high water saturation and low porosity. By using Lucia Rock class typing method, three types of rock type classes have been recognized, the first group is Grain-dominated Fabrics—grainstone, which represents a very good rock quality corresponds with (FZI-4) and classified as packstone-grainstone, the second group is Grain-dominated Fabrics—packstone, which corresponds with (FZI-3) and classified as packstone microfacies, the third group is Mud-dominated Fabrics—packstone, packstone, correspond with (FZI-1 and FZI-2) and classified as wackestone, mudstone-wackestone, and mudstone microfacies.

IMPROVING RECOVERY IN A THIN OIL COLUMN RESERVOIR—TUNA M–1 RESERVOIR EXPERIENCE IN THE GIPPSLAND BASIN, SOUTHEAST AUSTRALIA

2003 ◽  
Vol 43 (1) ◽  
pp. 175
Author(s):  
C. Santamaria ◽  
R. Fish
Keyword(s):  
Horizontal Well ◽  
Pressure Support ◽  
Horizontal Wells ◽  
Surveillance Data ◽  
Reservoir Properties ◽  
Actual Performance ◽  
New West ◽  
Expected Performance ◽  
Oil Rim ◽  
Gippsland Basin

The Tuna M–1 reservoir was developed in 1997 from both the new West Tuna platform and the existing Tuna A platform in the Gippsland Basin. The M–1 reservoir is contained within an anticlinal closure with an approximate gross hydrocarbon column of 85 metres. The oil column was originally 12 m thick and is supported by a large gas cap and a strong flank aquifer.Performance from the M–1 reservoir has been good, due to excellent reservoir properties. The combination of conventional and geo-steered horizontal wells has performed well with recovery efficiencies of 70% observed in many parts of the field. Lower than expected performance from the northwestern edge of the oil rim was, however, a significant anomaly, with recovery efficiencies 10% lower than from comparable rock in the southern and eastern parts of the field. The underlying cause of this lower performance was believed to be the result of an anisotropic aquifer response allowing greater pressure support along the northwestern flank of the fieldA re-entry well was drilled from a watered out horizontal well on the Tuna A platform in December 2000. This well was drilled as an oil production opportunity and as a key surveillance data point for the northwestern flank of the field. Results led to further surveillance including contact monitoring and production logging in horizontal wells. In addition to this, simulations were updated to reflect actual performance and surveillance data. Subsequent analysis supported development of a work program for new M–1 drainage points, including additional drill wells and the conversion of existing, watered out horizontal wells to conventional wells. The M–1 redevelopment work has been highly successful with production rates increasing by about 20,000 barrels per day in the first nine months of the program.

Propogation LWD Tool Analysing for Better Saturation Estimation in High Angle Horizontal Well Conditions

2021 ◽  
Author(s):  
Airat Mingazov ◽  
Andrey Zhidkov ◽  
Marat Nukhaev
Keyword(s):  
Horizontal Well ◽  
Water Saturation ◽  
Reservoir Properties ◽  
Resistivity Measurements ◽  
Well Completion ◽  
Geological Conditions ◽  
Formation Resistivity ◽  
Time Propagation ◽  
Resistivity Logging ◽  
Logging Tool

Abstract Multidepth electromagnetic logging tool is considered as traditional measurements of formation resistivity estimation while drilling. When considering data in wells with high angles trajectory, more than 70 degrees, the resistivity measurements could be affected by several factors associated with geological conditions and logging tool specifications. As the result, during water saturation estimation formation properties could be distorted, which will lead to significant effect of reservoir properties assessment and the design of the horizontal well completion. Within the framework of this paper, various methods of influence on the resistivity readings will be considered, especially with cross boundary effects and reservoir formations with anisotropy. At the same time, propagation resistivity logging technologies while drilling with interpretation and boundary propagation technologies will be observed, which has tilted azimuthal oriented receivers for geosteering service of horizontal wells and additionally helps with take into account of boundary enflurane on standard resistivity logging.

Sign in / Sign up

Export Citation Format

Share Document