scholarly journals A New Individual Tree Species Classification Method Based on the ResU-Net Model

Forests ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1202
Author(s):  
Caiyan Chen ◽  
Linhai Jing ◽  
Hui Li ◽  
Yunwei Tang
Keyword(s):  
Tree Species ◽  
Network Performance ◽  
Learning Networks ◽  
Species Classification ◽  
Accuracy Improvement ◽  
Individual Tree ◽  
Residual Structure ◽  
Forest Resource Management ◽  
Traditional Classification ◽  
Key Issues

Individual tree species (ITS) classification is one of the key issues in forest resource management. Compared with traditional classification methods, deep learning networks may yield ITS classification results with higher accuracy. In this research, the U-Net and ResNet networks were combined to form a Res-UNet network by changing the structure of the convolutional layer to the residual structure in ResNet based on the framework of the U-Net model. In addition, a second Res-UNet network named Res-UNet2 was further constructed to explore the effect of the stacking of residual structures on network performance. The Res-UNet2 model structure is similar to that of the Res-UNet model, but the convolutional layer in the U-Net model is created with a double-layer residual structure. The two networks proposed in this work were used to classify ITSs in WorldView-3 images of the Huangshan Mountains, Anhui Province, China, acquired in March 2019. The resulting ITS map was compared with the classification results obtained with U-Net and ResNet. The total classification accuracy of the ResU-Net network reached 94.29% and was higher than that generated by the U-Net and ResNet models, verifying that the ResU-Net model can more accurately classify ITSs. The Res-UNet2 model performed poorly compared to Res-UNet, indicating that stacking the residual modules in ResNet does not achieve an accuracy improvement.

scholarly journals Individual Tree Species Classification by Illuminated—Shaded Area Separation

2009 ◽  
Vol 2 (1) ◽  
pp. 19-35 ◽  
Author(s):  
Eetu Puttonen ◽  
Paula Litkey ◽  
Juha Hyyppä
Keyword(s):  
Tree Species ◽  
Species Classification ◽  
Individual Tree ◽  
Tree Species Classification

scholarly journals Individual tree crown delineation and tree species classification with hyperspectral and LiDAR data

PeerJ ◽  
2019 ◽  
Vol 6 ◽  
pp. e6227 ◽  
Author(s):  
Michele Dalponte ◽  
Lorenzo Frizzera ◽  
Damiano Gianelle
Keyword(s):  
Remote Sensing ◽  
Tree Species ◽  
Data Science ◽  
Remote Sensing Data ◽  
Tree Crown ◽  
Species Classification ◽  
Individual Tree ◽  
Sensing Data ◽  
Tree Species Classification ◽  
Selection Of

An international data science challenge, called National Ecological Observatory Network—National Institute of Standards and Technology data science evaluation, was set up in autumn 2017 with the goal to improve the use of remote sensing data in ecological applications. The competition was divided into three tasks: (1) individual tree crown (ITC) delineation, for identifying the location and size of individual trees; (2) alignment between field surveyed trees and ITCs delineated on remote sensing data; and (3) tree species classification. In this paper, the methods and results of team Fondazione Edmund Mach (FEM) are presented. The ITC delineation (Task 1 of the challenge) was done using a region growing method applied to a near-infrared band of the hyperspectral images. The optimization of the parameters of the delineation algorithm was done in a supervised way on the basis of the Jaccard score using the training set provided by the organizers. The alignment (Task 2) between the delineated ITCs and the field surveyed trees was done using the Euclidean distance among the position, the height, and the crown radius of the ITCs and the field surveyed trees. The classification (Task 3) was performed using a support vector machine classifier applied to a selection of the hyperspectral bands and the canopy height model. The selection of the bands was done using the sequential forward floating selection method and the Jeffries Matusita distance. The results of the three tasks were very promising: team FEM ranked first in the data science competition in Task 1 and 2, and second in Task 3. The Jaccard score of the delineated crowns was 0.3402, and the results showed that the proposed approach delineated both small and large crowns. The alignment was correctly done for all the test samples. The classification results were good (overall accuracy of 88.1%, kappa accuracy of 75.7%, and mean class accuracy of 61.5%), although the accuracy was biased toward the most represented species.

scholarly journals An Operational Workflow of Deciduous-Dominated Forest Species Classification: Crown Delineation, Gap Elimination, and Object-Based Classification

2019 ◽  
Vol 11 (18) ◽  
pp. 2078 ◽  
Author(s):  
Yuhong He ◽  
Jian Yang ◽  
John Caspersen ◽  
Trevor Jones
Keyword(s):  
Tree Species ◽  
Near Infrared ◽  
Deciduous Forest ◽  
Structural Diversity ◽  
Species Classification ◽  
Individual Tree ◽  
Spectral Overlap ◽  
Object Based ◽  
Early Fall ◽  
Crown Delineation

Recent advances in remote sensing technology provide sufficient spatial detail to achieve species-level classification over large vegetative ecosystems. In deciduous-dominated forests, however, as tree species diversity and forest structural diversity increase, the frequency of spectral overlap between species also increases and our ability to classify tree species significantly decreases. This study proposes an operational workflow of individual tree-based species classification for a temperate, mixed deciduous forest using three-seasonal WorldView images, involving three steps of individual tree crown (ITC) delineation, non-forest gap elimination, and object-based classification. The process of species classification started with ITC delineation using the spectral angle segmentation algorithm, followed by object-based random forest classifications. A total of 672 trees was located along three triangular transects for training and validation. For single-season images, the late-spring, mid-summer, and early-fall images achieve the overall accuracies of 0.46, 0.42, and 0.35, respectively. Combining the spectral information of the early-spring, mid-summer, and early-fall images increases the overall accuracy of classification to 0.79. However, further adding the late-fall image to separate deciduous and coniferous trees as an extra step was not successful. Compared to traditional four-band (Blue, Green, Red, Near-Infrared) images, the four additional bands of WorldView images (i.e., Coastal, Yellow, Red Edge, and Near-Infrared2) contribute to the species classification greatly (OA: 0.79 vs. 0.53). This study gains insights into the contribution of the additional spectral bands and multi-seasonal images to distinguishing species with seemingly high degrees of spectral overlap.

scholarly journals A Weighted SVM-Based Approach to Tree Species Classification at Individual Tree Crown Level Using LiDAR Data

2019 ◽  
Vol 11 (24) ◽  
pp. 2948 ◽  
Author(s):  
Hoang Minh Nguyen ◽  
Begüm Demir ◽  
Michele Dalponte
Keyword(s):  
Tree Species ◽  
Remote Sensing Data ◽  
Classification Problem ◽  
Learning Phase ◽  
Support Vector ◽  
Lidar Data ◽  
Species Classification ◽  
Individual Tree ◽  
Tree Species Classification ◽  
Training Samples

Tree species classification at individual tree crowns (ITCs) level, using remote-sensing data, requires the availability of a sufficient number of reliable reference samples (i.e., training samples) to be used in the learning phase of the classifier. The classification performance of the tree species is mainly affected by two main issues: (i) an imbalanced distribution of the tree species classes, and (ii) the presence of unreliable samples due to field collection errors, coordinate misalignments, and ITCs delineation errors. To address these problems, in this paper, we present a weighted Support Vector Machine (wSVM)-based approach for the detection of tree species at ITC level. The proposed approach initially extracts (i) different weights associated to different classes of tree species, to mitigate the effect of the imbalanced distribution of the classes; and (ii) different weights associated to different training samples according to their importance for the classification problem, to reduce the effect of unreliable samples. Then, in order to exploit different weights in the learning phase of the classifier a wSVM algorithm is used. The features to characterize the tree species at ITC level are extracted from both the elevation and intensity of airborne light detection and ranging (LiDAR) data. Experimental results obtained on two study areas located in the Italian Alps show the effectiveness of the proposed approach.

scholarly journals INDIVIDUAL TREE SPECIES CLASSIFICATION BASED ON TERRESTRIAL LASER SCANNING USING CURVATURE ESTIMATION AND CONVOLUTIONAL NEURAL NETWORK

2019 ◽  
Vol XLII-2/W13 ◽  
pp. 1077-1082
Author(s):  
T. Mizoguchi ◽  
A. Ishii ◽  
H. Nakamura
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Tree Species ◽  
Point Cloud ◽  
Superior Performance ◽  
Depth Image ◽  
Species Classification ◽  
Individual Tree ◽  
Curvature Estimation ◽  
Bark Texture

<p><strong>Abstract.</strong> In this paper, we propose a new method for specifying individual tree species based on depth and curvature image creation from point cloud captured by terrestrial laser scanner and Convolutional Neural Network (CNN). Given a point cloud of an individual tree, the proposed method first extracts the subset of points corresponding to a trunk at breast-height. Then branches and leaves are removed from the extracted points by RANSAC -based circle fitting, and the depth image is created by globally fitting a cubic polynomial surface to the remaining trunk points. Furthermore, principal curvatures are estimated at each scanned point by locally fitting a quadratic surface to its neighbouring points. Depth images clearly capture the bark texture involved by its split and tear-off, but its computation is unstable and may fail to acquire bark shape in the resulting images. In contrast, curvature estimation enables stable computation of surface concavity and convexity, and thus it can well represent local geometry of bark texture in the curvature images. In comparison to the depth image, the curvature image enables accurate classification for slanted trees with many branches and leaves. We also evaluated the effectiveness of a multi-modal approach for species classification in which depth and curvature images are analysed together using CNN and support vector machine. We verified the superior performance of our proposed method for point cloud of Japanese cedar and cypress trees.</p>

scholarly journals A Review: Individual Tree Species Classification Using Integrated Airborne LiDAR and Optical Imagery with a Focus on the Urban Environment

Forests ◽  
2018 ◽  
Vol 10 (1) ◽  
pp. 1 ◽  
Author(s):  
Kepu Wang ◽  
Tiejun Wang ◽  
Xuehua Liu
Keyword(s):  
Tree Species ◽  
Classification Accuracy ◽  
Urban Environments ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Species Classification ◽  
Individual Tree ◽  
Urban Tree ◽  
Tree Species Classification ◽  
Optical Imagery

With the significant progress of urbanization, cities and towns are suffering from air pollution, heat island effects, and other environmental problems. Urban vegetation, especially trees, plays a significant role in solving these ecological problems. To maximize services provided by vegetation, urban tree species should be properly selected and optimally arranged. Therefore, accurate classification of tree species in urban environments has become a major issue. In this paper, we reviewed the potential of light detection and ranging (LiDAR) data to improve the accuracy of urban tree species classification. In detail, we reviewed the studies using LiDAR data in urban tree species mapping, especially studies where LiDAR data was fused with optical imagery, through classification accuracy comparison, general workflow extraction, and discussion and summarizing of the specific contribution of LiDAR. It is concluded that combining LiDAR data in urban tree species identification could achieve better classification accuracy than using either dataset individually, and that such improvements are mainly due to finer segmentation, shadowing effect reduction, and refinement of classification rules based on LiDAR. Furthermore, some suggestions are given to improve the classification accuracy on a finer and larger species level, while also aiming to maintain classification costs.

scholarly journals Estimation of Individual Tree Biomass in Natural Secondary Forests Based on ALS Data and WorldView-3 Imagery

2022 ◽  
Vol 14 (2) ◽  
pp. 271
Author(s):  
Yinghui Zhao ◽  
Ye Ma ◽  
Lindi Quackenbush ◽  
Zhen Zhen
Keyword(s):  
Machine Learning ◽  
Ensemble Learning ◽  
Tree Species ◽  
Laser Scanning ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Secondary Forests ◽  
Species Classification ◽  
Individual Tree ◽  
Tree Species Classification

Individual-tree aboveground biomass (AGB) estimation can highlight the spatial distribution of AGB and is vital for precision forestry. Accurately estimating individual tree AGB is a requisite for accurate forest carbon stock assessment of natural secondary forests (NSFs). In this study, we investigated the performance of three machine learning and three ensemble learning algorithms in tree species classification based on airborne laser scanning (ALS) and WorldView-3 imagery, inversed the diameter at breast height (DBH) using an optimal tree height curve model, and mapped individual tree AGB for a site in northeast China using additive biomass equations, tree species, and inversed DBH. The results showed that the combination of ALS and WorldView-3 performed better than either single data source in tree species classification, and ensemble learning algorithms outperformed machine learning algorithms (except CNN). Seven tree species had satisfactory accuracy of individual tree AGB estimation, with R2 values ranging from 0.68 to 0.85 and RMSE ranging from 7.47 kg to 36.83kg. The average individual tree AGB was 125.32 kg and the forest AGB was 113.58 Mg/ha in the Maoershan study site in Heilongjiang Province, China. This study provides a way to classify tree species and estimate individual tree AGB of NSFs based on ALS data and WorldView-3 imagery.

scholarly journals Single Tree Classification Using Multi-Temporal ALS Data and CIR Imagery in Mixed Old-Growth Forest in Poland

2021 ◽  
Vol 13 (24) ◽  
pp. 5101
Author(s):  
Agnieszka Kamińska ◽  
Maciej Lisiewicz ◽  
Krzysztof Stereńczak
Keyword(s):  
Tree Species ◽  
Classification Accuracy ◽  
Sustainable Forest Management ◽  
Point Clouds ◽  
Deciduous Tree ◽  
Spectral Information ◽  
Species Classification ◽  
Individual Tree ◽  
Mean Values ◽  
Old Growth Forest

Tree species classification is important for a variety of environmental applications, including biodiversity monitoring, wildfire risk assessment, ecosystem services assessment, and sustainable forest management. In this study we used a fusion of three remote sensing (RM) datasets including ALS (leaf-on and leaf-off) and colour-infrared (CIR) imagery (leaf-on), to classify different coniferous and deciduous tree species, including dead class, in a mixed temperate forest in Poland. We used intensity and structural variables from the ALS data and spectral information derived from aerial imagery for the classification procedure. Additionally, we tested the differences in classification accuracy of all the variants included in the data integration. The random forest classifier was used in the study. The highest accuracies were obtained for classification based on both point clouds and including image spectral information. The mean values for overall accuracy and kappa were 84.3% and 0.82, respectively. Analysis of the leaf-on and leaf-off alone is not sufficient to identify individual tree species due to their different discriminatory power. Leaf-on and leaf-off ALS point cloud features alone gave the lowest accuracies of 72% ≤ OA ≤ 74% and 0.67 ≤ κ ≤ 0.70. Classification based on both point clouds was found to give satisfactory and comparable results to classification based on combined information from all three sources (83% ≤ OA ≤ 84% and 0.81 ≤ κ ≤ 0.82). The classification accuracy varied between species. The classification results for coniferous trees were always better than for deciduous trees independent of the datasets. In the classification based on both point clouds (leaf-on and leaf-off), the intensity features seemed to be more important than the other groups of variables, especially the coefficient of variation, skewness, and percentiles. The NDVI was the most important CIR-based feature.

Sign in / Sign up

Export Citation Format

Share Document