scholarly journals An Operational Workflow of Deciduous-Dominated Forest Species Classification: Crown Delineation, Gap Elimination, and Object-Based Classification

2019 ◽  
Vol 11 (18) ◽  
pp. 2078 ◽  
Author(s):  
Yuhong He ◽  
Jian Yang ◽  
John Caspersen ◽  
Trevor Jones
Keyword(s):  
Tree Species ◽  
Near Infrared ◽  
Deciduous Forest ◽  
Structural Diversity ◽  
Species Classification ◽  
Individual Tree ◽  
Spectral Overlap ◽  
Object Based ◽  
Early Fall ◽  
Crown Delineation

Recent advances in remote sensing technology provide sufficient spatial detail to achieve species-level classification over large vegetative ecosystems. In deciduous-dominated forests, however, as tree species diversity and forest structural diversity increase, the frequency of spectral overlap between species also increases and our ability to classify tree species significantly decreases. This study proposes an operational workflow of individual tree-based species classification for a temperate, mixed deciduous forest using three-seasonal WorldView images, involving three steps of individual tree crown (ITC) delineation, non-forest gap elimination, and object-based classification. The process of species classification started with ITC delineation using the spectral angle segmentation algorithm, followed by object-based random forest classifications. A total of 672 trees was located along three triangular transects for training and validation. For single-season images, the late-spring, mid-summer, and early-fall images achieve the overall accuracies of 0.46, 0.42, and 0.35, respectively. Combining the spectral information of the early-spring, mid-summer, and early-fall images increases the overall accuracy of classification to 0.79. However, further adding the late-fall image to separate deciduous and coniferous trees as an extra step was not successful. Compared to traditional four-band (Blue, Green, Red, Near-Infrared) images, the four additional bands of WorldView images (i.e., Coastal, Yellow, Red Edge, and Near-Infrared2) contribute to the species classification greatly (OA: 0.79 vs. 0.53). This study gains insights into the contribution of the additional spectral bands and multi-seasonal images to distinguishing species with seemingly high degrees of spectral overlap.

scholarly journals An Evaluation of Pixel- and Object-Based Tree Species Classification in Mixed Deciduous Forests Using Pansharpened Very High Spatial Resolution Satellite Imagery

2021 ◽  
Vol 13 (10) ◽  
pp. 1868
Author(s):  
Martina Deur ◽  
Mateo Gašparović ◽  
Ivan Balenović
Keyword(s):  
Spatial Resolution ◽  
Satellite Imagery ◽  
Tree Species ◽  
Classification Accuracy ◽  
New Technologies ◽  
Deciduous Forest ◽  
Species Classification ◽  
Tree Species Classification ◽  
Object Based ◽  
Very High

Quality tree species information gathering is the basis for making proper decisions in forest management. By applying new technologies and remote sensing methods, very high resolution (VHR) satellite imagery can give sufficient spatial detail to achieve accurate species-level classification. In this study, the influence of pansharpening of the WorldView-3 (WV-3) satellite imagery on classification results of three main tree species (Quercus robur L., Carpinus betulus L., and Alnus glutinosa (L.) Geartn.) has been evaluated. In order to increase tree species classification accuracy, three different pansharpening algorithms (Bayes, RCS, and LMVM) have been conducted. The LMVM algorithm proved the most effective pansharpening technique. The pixel- and object-based classification were applied to three pansharpened imageries using a random forest (RF) algorithm. The results showed a very high overall accuracy (OA) for LMVM pansharpened imagery: 92% and 96% for tree species classification based on pixel- and object-based approach, respectively. As expected, the object-based exceeded the pixel-based approach (OA increased by 4%). The influence of fusion on classification results was analyzed as well. Overall classification accuracy was improved by the spatial resolution of pansharpened images (OA increased by 7% for pixel-based approach). Also, regardless of pixel- or object-based classification approaches, the influence of the use of pansharpening is highly beneficial to classifying complex, natural, and mixed deciduous forest areas.

scholarly journals Individual Tree Species Classification by Illuminated—Shaded Area Separation

2009 ◽  
Vol 2 (1) ◽  
pp. 19-35 ◽  
Author(s):  
Eetu Puttonen ◽  
Paula Litkey ◽  
Juha Hyyppä
Keyword(s):  
Tree Species ◽  
Species Classification ◽  
Individual Tree ◽  
Tree Species Classification

scholarly journals Individual tree crown delineation and tree species classification with hyperspectral and LiDAR data

PeerJ ◽  
2019 ◽  
Vol 6 ◽  
pp. e6227 ◽  
Author(s):  
Michele Dalponte ◽  
Lorenzo Frizzera ◽  
Damiano Gianelle
Keyword(s):  
Remote Sensing ◽  
Tree Species ◽  
Data Science ◽  
Remote Sensing Data ◽  
Tree Crown ◽  
Species Classification ◽  
Individual Tree ◽  
Sensing Data ◽  
Tree Species Classification ◽  
Selection Of

An international data science challenge, called National Ecological Observatory Network—National Institute of Standards and Technology data science evaluation, was set up in autumn 2017 with the goal to improve the use of remote sensing data in ecological applications. The competition was divided into three tasks: (1) individual tree crown (ITC) delineation, for identifying the location and size of individual trees; (2) alignment between field surveyed trees and ITCs delineated on remote sensing data; and (3) tree species classification. In this paper, the methods and results of team Fondazione Edmund Mach (FEM) are presented. The ITC delineation (Task 1 of the challenge) was done using a region growing method applied to a near-infrared band of the hyperspectral images. The optimization of the parameters of the delineation algorithm was done in a supervised way on the basis of the Jaccard score using the training set provided by the organizers. The alignment (Task 2) between the delineated ITCs and the field surveyed trees was done using the Euclidean distance among the position, the height, and the crown radius of the ITCs and the field surveyed trees. The classification (Task 3) was performed using a support vector machine classifier applied to a selection of the hyperspectral bands and the canopy height model. The selection of the bands was done using the sequential forward floating selection method and the Jeffries Matusita distance. The results of the three tasks were very promising: team FEM ranked first in the data science competition in Task 1 and 2, and second in Task 3. The Jaccard score of the delineated crowns was 0.3402, and the results showed that the proposed approach delineated both small and large crowns. The alignment was correctly done for all the test samples. The classification results were good (overall accuracy of 88.1%, kappa accuracy of 75.7%, and mean class accuracy of 61.5%), although the accuracy was biased toward the most represented species.

scholarly journals A Weighted SVM-Based Approach to Tree Species Classification at Individual Tree Crown Level Using LiDAR Data

2019 ◽  
Vol 11 (24) ◽  
pp. 2948 ◽  
Author(s):  
Hoang Minh Nguyen ◽  
Begüm Demir ◽  
Michele Dalponte
Keyword(s):  
Tree Species ◽  
Remote Sensing Data ◽  
Classification Problem ◽  
Learning Phase ◽  
Support Vector ◽  
Lidar Data ◽  
Species Classification ◽  
Individual Tree ◽  
Tree Species Classification ◽  
Training Samples

Tree species classification at individual tree crowns (ITCs) level, using remote-sensing data, requires the availability of a sufficient number of reliable reference samples (i.e., training samples) to be used in the learning phase of the classifier. The classification performance of the tree species is mainly affected by two main issues: (i) an imbalanced distribution of the tree species classes, and (ii) the presence of unreliable samples due to field collection errors, coordinate misalignments, and ITCs delineation errors. To address these problems, in this paper, we present a weighted Support Vector Machine (wSVM)-based approach for the detection of tree species at ITC level. The proposed approach initially extracts (i) different weights associated to different classes of tree species, to mitigate the effect of the imbalanced distribution of the classes; and (ii) different weights associated to different training samples according to their importance for the classification problem, to reduce the effect of unreliable samples. Then, in order to exploit different weights in the learning phase of the classifier a wSVM algorithm is used. The features to characterize the tree species at ITC level are extracted from both the elevation and intensity of airborne light detection and ranging (LiDAR) data. Experimental results obtained on two study areas located in the Italian Alps show the effectiveness of the proposed approach.

scholarly journals Individual Tree Crown Segmentation and Classification of 13 Tree Species Using Airborne Hyperspectral Data

2018 ◽  
Vol 10 (8) ◽  
pp. 1218 ◽  
Author(s):  
Julia Maschler ◽  
Clement Atzberger ◽  
Markus Immitzer
Keyword(s):  
Random Forest ◽  
Scots Pine ◽  
Tree Species ◽  
Near Infrared ◽  
Mean Shift ◽  
Hyperspectral Data ◽  
Tree Crown ◽  
Individual Tree ◽  
Tree Crowns

Knowledge of the distribution of tree species within a forest is key for multiple economic and ecological applications. This information is traditionally acquired through time-consuming and thereby expensive field work. Our study evaluates the suitability of a visible to near-infrared (VNIR) hyperspectral dataset with a spatial resolution of 0.4 m for the classification of 13 tree species (8 broadleaf, 5 coniferous) on an individual tree crown level in the UNESCO Biosphere Reserve ‘Wienerwald’, a temperate Austrian forest. The study also assesses the automation potential for the delineation of tree crowns using a mean shift segmentation algorithm in order to permit model application over large areas. Object-based Random Forest classification was carried out on variables that were derived from 699 manually delineated as well as automatically segmented reference trees. The models were trained separately for two strata: small and/or conifer stands and high broadleaf forests. The two strata were delineated beforehand using CHM-based tree height and NDVI. The predictor variables encompassed spectral reflectance, vegetation indices, textural metrics and principal components. After feature selection, the overall classification accuracy (OA) of the classification based on manual delineations of the 13 tree species was 91.7% (Cohen’s kappa (κ) = 0.909). The highest user’s and producer’s accuracies were most frequently obtained for Weymouth pine and Scots Pine, while European ash was most often associated with the lowest accuracies. The classification that was based on mean shift segmentation yielded similarly good results (OA = 89.4% κ = 0.883). Based on the automatically segmented trees, the Random Forest models were also applied to the whole study site (1050 ha). The resulting tree map of the study area confirmed a high abundance of European beech (58%) with smaller amounts of oak (6%) and Scots pine (5%). We conclude that highly accurate tree species classifications can be obtained from hyperspectral data covering the visible and near-infrared parts of the electromagnetic spectrum. Our results also indicate a high automation potential of the method, as the results from the automatically segmented tree crowns were similar to those that were obtained for the manually delineated tree crowns.

scholarly journals Assessing Forest Type and Tree Species Classification Using Sentinel-1 C-Band SAR Data in Southern Sweden

2021 ◽  
Vol 13 (16) ◽  
pp. 3237
Author(s):  
Alberto Udali ◽  
Emanuele Lingua ◽  
Henrik J. Persson
Keyword(s):  
Tree Species ◽  
Deciduous Forest ◽  
Forest Type ◽  
Temporal Stability ◽  
Winter Season ◽  
Principal Component ◽  
Species Classification ◽  
Explanatory Variables ◽  
Random Forest Models ◽  
Sar Data

The multitemporal acquisition of images from the Sentinel-1 satellites allows continuous monitoring of a forest. This study focuses on the use of multitemporal C-band synthetic aperture radar (SAR) data to assess the results for forest type (FTY), between coniferous and deciduous forest, and tree species (SPP) classification. We also investigated the temporal stability through the use of backscatter from multiple seasons and years of acquisition. SAR acquisitions were pre-processed, histogram-matched, smoothed, and temperature-corrected. The normalized average backscatter was extracted for interpreted plots and used to train Random Forest models. The classification results were then validated with field plots. A principal component analysis was tested to reduce the dimensionality of the explanatory variables, which generally improved the results. Overall, the FTY classifications were promising, with higher accuracies (OA of 0.94 and K = 0.86) than the SPP classification (OA of 0.66 and K = 0.54). The use of merely winter images (OA = 0.89) reached, on average, results that were almost as good as those using of images from the entire year. The use of images from a single winter season reached a similar result (OA = 0.87). We conclude that multiple Sentinel-1 images acquired in winter conditions are feasible to classify forest types in a hemi-boreal Swedish forest.

scholarly journals A New Individual Tree Species Classification Method Based on the ResU-Net Model

Forests ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1202
Author(s):  
Caiyan Chen ◽  
Linhai Jing ◽  
Hui Li ◽  
Yunwei Tang
Keyword(s):  
Tree Species ◽  
Network Performance ◽  
Learning Networks ◽  
Species Classification ◽  
Accuracy Improvement ◽  
Individual Tree ◽  
Residual Structure ◽  
Forest Resource Management ◽  
Traditional Classification ◽  
Key Issues

Individual tree species (ITS) classification is one of the key issues in forest resource management. Compared with traditional classification methods, deep learning networks may yield ITS classification results with higher accuracy. In this research, the U-Net and ResNet networks were combined to form a Res-UNet network by changing the structure of the convolutional layer to the residual structure in ResNet based on the framework of the U-Net model. In addition, a second Res-UNet network named Res-UNet2 was further constructed to explore the effect of the stacking of residual structures on network performance. The Res-UNet2 model structure is similar to that of the Res-UNet model, but the convolutional layer in the U-Net model is created with a double-layer residual structure. The two networks proposed in this work were used to classify ITSs in WorldView-3 images of the Huangshan Mountains, Anhui Province, China, acquired in March 2019. The resulting ITS map was compared with the classification results obtained with U-Net and ResNet. The total classification accuracy of the ResU-Net network reached 94.29% and was higher than that generated by the U-Net and ResNet models, verifying that the ResU-Net model can more accurately classify ITSs. The Res-UNet2 model performed poorly compared to Res-UNet, indicating that stacking the residual modules in ResNet does not achieve an accuracy improvement.

scholarly journals NEON NIST data science evaluation challenge: methods and results of team FEM

2018 ◽  
Author(s):  
Michele Dalponte ◽  
Lorenzo Frizzera ◽  
Damiano Gianelle
Keyword(s):  
Data Science ◽  
Near Infrared ◽  
Remote Sensing Data ◽  
Region Growing ◽  
Support Vector ◽  
Infrared Band ◽  
Species Classification ◽  
Individual Tree ◽  
Data Alignment ◽  
Selection Of

An international data science challenge, called NEON NIST data science evaluation, was set up in autumn 2017 with the goal to improve the use of remote sensing data in ecological applications. The competition was divided into three tasks: 1) segmentation of tree crowns; 2) data alignment; and 3) tree species classification. In this paper the methods and results of team FEM in the NEON NIST data science evaluation challenge are presented. The individual tree crown (ITC) segmentation (Task 1 of the challenge) was done using a region growing method applied to a near-infrared band of the hyperspectral images. The optimization of the parameters of the segmentation algorithm was done in a supervised way on the basis of the Jaccard score using the training set provided by the organizers. The alignment (Task 2) between the segmented ITCs and the ground measured trees was done using an Euclidean distance among the position, the height, and the crown radius of the ITCs and the ground trees. The classification (Task 3) was performed using a Support Vector Machine classifier applied to a selection of the hyperspectral bands. The selection of the bands was done using a Sequential Forward Floating Selection method and the Jeffries Matusita distance. The results in the three tasks were very promising: team FEM ranked first in Task 1 and 2, and second in Task 3. The segmentation results showed that the proposed approach segmented both small and large crowns. The alignment was correctly done for all the test samples. The classification results were good, even if the accuracy was biased towards the most represented species.

Sign in / Sign up

Export Citation Format

Share Document