scholarly journals Using Computational Modelling to Study Extensional Rheometry Tests for Inelastic Fluids

Fluids ◽  
2021 ◽  
Vol 6 (12) ◽  
pp. 464
Author(s):  
Mohammadreza Aali ◽  
Célio Fernandes ◽  
Olga Sousa Carneiro ◽  
João Miguel Nóbrega
Keyword(s):  
Test Temperature ◽  
Computational Modelling ◽  
Extensional Viscosity ◽  
Computational Domain ◽  
Numerical Predictions ◽  
Extensional Rheometry ◽  
Significant Difference ◽  
Order Of Magnitude ◽  
Definition Of ◽  
Selection Of

The present work focuses on the extensional rheometry test, performed with the Sentmanat extensional rheometer (SER) device, and its main objectives are: (i) to establish the modelling requirements, such as the geometry of the computational domain, initial and boundary conditions, appropriate case setup, and (ii) to investigate the effect of self-induced errors, namely on the sample dimensions and test temperature, on the extensional viscosity obtained through the extensional rheometry tests. The definition of the modelling setup also comprised the selection of the appropriate mesh refinement level to model the process and the conclusion that gravity can be neglected without affecting the numerical predictions. The subsequent study allowed us to conclude that the errors on the sample dimensions have similar effects, originating differences on the extensional viscosity proportional to the induced variations. On the other hand, errors of a similar order of magnitude on the test temperature promote a significant difference in the predicted extensional viscosity.

Selection and Preparation of Specific Tissue Regions For Tem Using Large Epoxy-Embedded Blocks

1973 ◽  
Vol 31 ◽  
pp. 324-325 ◽  
Author(s):  
P. M. Lowrie ◽  
W. S. Tyler
Keyword(s):  
Electron Microscopy ◽  
Anatomical Structures ◽  
Ultrastructural Studies ◽  
Transmission Electron ◽  
Microscopic Evaluation ◽  
Embedded Blocks ◽  
Specific Tissue ◽  
Definition Of ◽  
Areas Of Interest ◽  
Selection Of

The importance of examining stained 1 to 2μ plastic sections by light microscopy has long been recognized, both for increased definition of many histologic features and for selection of specimen samples to be used in ultrastructural studies. Selection of specimens with specific orien ation relative to anatomical structures becomes of critical importance in ultrastructural investigations of organs such as the lung. The uantity of blocks necessary to locate special areas of interest by random sampling is large, however, and the method is lacking in precision. Several methods have been described for selection of specific areas for electron microscopy using light microscopic evaluation of paraffin, epoxy-infiltrated, or epoxy-embedded large blocks from which thick sections were cut. Selected areas from these thick sections were subsequently removed and re-embedded or attached to blank precasted blocks and resectioned for transmission electron microscopy (TEM).

A Comparison of Four Adolescent Language Tests

1987 ◽  
Vol 18 (3) ◽  
pp. 250-266 ◽  
Author(s):  
R. Jane Lieberman ◽  
Ann Marie C. Heffron ◽  
Stephanie J. West ◽  
Edward C. Hutchinson ◽  
Thomas W. Swem
Keyword(s):  
Test Performance ◽  
Sixth Grade ◽  
Significant Discrepancy ◽  
Language Impaired ◽  
Language Functions ◽  
Language Tests ◽  
Significant Difference ◽  
Sixth Grade Students ◽  
Overall Performance ◽  
Selection Of

Four recently developed adolescent language tests, the Fullerton Test for Adolescents (FLTA), the Test of Adolescent Language (TOAL), the Clinical Evaluation of Language Functions (CELF), and the Screening Test of Adolescent Language (STAL), were compared to determine: (a) whether they measured the same language skills (content) in the same way (procedures); and (b) whether students performed similarly on each of the tests. First, respective manuals were reviewed to compare selection of subtest content areas and subtest procedures. Then, each of the tests was administered according to standardized procedures to 30 unselected sixth-grade students. Despite apparent differences in test content and procedures, there was no significant difference in students' performance on three of the four tests, and correlations among test performance were moderate to high. A comparison of the pass/fail rates for overall performance on the tests, however, revealed a significant discrepancy between the proportions of students identified in need of further evaluation on the STAL (20%) and the proportion diagnosed as language impaired on the three diagnostic tests (60-73%). Clinical implications are discussed.

Caracterização da Peneira Média em Clones de Coffea canephora

REVISTA FIMCA ◽  
2018 ◽  
Vol 5 (2) ◽  
pp. 28-31
Author(s):  
Darlan Darlan Sanches Barbosa Alves ◽  
Victor Mouzinho Spinelli ◽  
Marcos Santana Moraes ◽  
Carolina Augusto De Souza ◽  
Rodrigo da Silva Ribeiro ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Block Design ◽  
Coffea Canephora ◽  
Coffee Production ◽  
Randomized Block Design ◽  
Significant Difference ◽  
The Mean ◽  
Four Blocks ◽  
Selection Of

Introdução: O estado de Rondônia se destaca como tradicional produtor de café, sendo o segundo maior produtor brasileiro de C. canephora. No melhoramento genético de C. canephora, a seleção de plantas de elevada peneira média está associada à bebida de qualidade superior. Objetivos: O objetivo desse estudo foi avaliar a variabilidade genética de clones de C. canephora para o tamanho dos grãos, mensurado a partir da avaliação da peneira média (PM). Materiais e Métodos: Para isso, foi conduzido ao longo de dois anos agrícolas experimento no campo experimental da Embrapa no município de Ouro Preto do Oeste-RO, para a avaliação da peneira média de 130 genótipos (clones) com características das variedades botânicas Conilon, Robusta e híbridos intervarietais. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições de quatro plantas por parcela. Resultados: Não houve resultados significativos para a interação clones X anos, indicando uma maior consistência no comportamento das plantas ao longo do tempo. Porém foram observadas diferenças significativas para o tamanho dos grãos entre os genótipos avaliados, possibilitando selecionar genótipos superiores. Conclusão: Os genótipos agruparam-se em cinco classes de acordo com o teste de média, subsidiando a caracterização de um gradiente de variabilidade da característica avaliada ABSTRACTIntroduction: Coffea canephora accounts for approximately 35% of the world's coffee production. The state of Rondônia stands out as a traditional coffee producer, being the second largest Brazilian producer of C. canephora. In the classical genetic improvement of C. anephora, the selection of plants of high average sieve is associated with a drink of superior quality. Objectives: The objective of this udy was to evaluate the genetic variability of Coffea canephora clones for the agronomic medium sieve (PM). Materials and Methods: The experiment was conducted in the experimental field of Embrapa, municipality of OuroPreto do Oeste-RO, located at coordinates 10º44'53 "S and 62º12'57". One hundred thirty genotypes (clones) of botanical characteristics Conilon, Robusta and intervarietal hybrids were evaluated in the agricultural years 2013-2014 and 2014-2015. The experimental design was a randomized block design with four blocks and four plants per plot, spacing 3.5 x 1.5 meters between plants. Results: Significant difference was found for the grain size. According to the F test, at 5% probability, the genotypes were grouped into five classes according to the mean test. Conclusion: The results obtained subsidized the characterization of a variability gradient of the evaluated trait.

Non-stationary process characteristics of the gas outflow into a liquid

2019 ◽  
Vol 14 (2) ◽  
pp. 82-88
Author(s):  
M.V. Alekseev ◽  
I.S. Vozhakov ◽  
S.I. Lezhnin
Keyword(s):  
Numerical Simulation ◽  
Liquid Column ◽  
Gas Content ◽  
Liquid Lead ◽  
Gas Flows ◽  
Asymptotic Model ◽  
Process Characteristics ◽  
Significant Difference ◽  
Order Of Magnitude ◽  
Volume Method

A numerical simulation of the process of the outflow of gas under pressure into a closed container partially filled with liquid was carried out. For comparative theoretical analysis, an asymptotic model was used with assumptions about the adiabaticity of the gas outflow process and the ideality of the liquid during the oscillatory one-dimensional motion of the liquid column. In this case, the motion of the liquid column and the evolution of pressure in the gas are determined by the equation of dynamics and the balance of enthalpy. Numerical simulation was performed in the OpenFOAM package using the fluid volume method (VOF method) and the standard k-e turbulence model. The evolution of the fields of volumetric gas content, velocity, and pressure during the flow of gas from the high-pressure chamber into a closed channel filled with liquid in the presence of a ”gas blanket“ at the upper end of the channel is obtained. It was shown that the dynamics of pulsations in the gas cavity that occurs when the gas flows into the closed region substantially depends on the physical properties of the liquid in the volume, especially the density. Numerical modeling showed that the injection of gas into water occurs in the form of a jet outflow of gas, and for the outflow into liquid lead, a gas slug is formed at the bottom of the channel. Satisfactory agreement was obtained between the numerical calculation and the calculation according to the asymptotic model for pressure pulsations in a gas projectile in liquid lead. For water, the results of calculations using the asymptotic model give a significant difference from the results of numerical calculations. In all cases, the velocity of the medium obtained by numerical simulation and when using the asymptotic model differ by an order of magnitude or more.

Temperature Selection of Rainbow Trout (Salmo gairdneri) Fingerlings in Vertical and Horizontal Gradients

1971 ◽  
Vol 28 (11) ◽  
pp. 1801-1804 ◽  
Author(s):  
R. W. McCauley ◽  
W. L. Pond
Keyword(s):  
Rainbow Trout ◽  
Salmo Gairdneri ◽  
Temperature Preference ◽  
Temperature Selection ◽  
Horizontal Gradients ◽  
Significant Difference ◽  
Preferred Temperatures ◽  
Laboratory Investigations ◽  
Horizontal Temperature Gradients ◽  
Selection Of

Preferred temperatures of underyearling rainbow trout (Salmo gairdneri) were determined in both vertical and horizontal temperature gradients. No statistically significant difference was found between the preferred temperatures by the two different methods. This suggests that the nature of the gradient plays a lesser role than generally believed in laboratory investigations of temperature preference.

scholarly journals Promotion of Resilience in Migrants: A Systematic Review of Study and Psychosocial Intervention

2021 ◽  
Author(s):  
Maria Ciaramella ◽  
Nadia Monacelli ◽  
Livia Concetta Eugenia Cocimano
Keyword(s):  
Systematic Review ◽  
Psychosocial Intervention ◽  
Life Experiences ◽  
Psychosocial Interventions ◽  
Migrant Population ◽  
Methodological Choices ◽  
Research Questions ◽  
Definition Of ◽  
Selection Of

AbstractThis systematic review aimed to contribute to a better and more focused understanding of the link between the concept of resilience and psychosocial interventions in the migrant population. The research questions concerned the type of population involved, definition of resilience, methodological choices and which intervention programmes were targeted at migrants. In the 90 articles included, an heterogeneity in defining resilience or not well specified definition resulted. Different migratory experiences were not adequately considered in the selection of participants. Few resilience interventions on migrants were resulted. A lack of procedure’s descriptions that keep in account specific migrants’ life-experiences and efficacy’s measures were highlighted.

Comparison of soot models for reacting sprays in diesel engine-like conditions

2021 ◽  
pp. 095440702110154
Author(s):  
Pavan Prakash Duvvuri ◽  
Rajesh Kumar Shrivastava ◽  
Sheshadri Sreedhara
Keyword(s):  
Experimental Data ◽  
Volume Fraction ◽  
Soot Volume Fraction ◽  
Modeling Framework ◽  
Aerosol Dynamics ◽  
Significant Difference ◽  
Polycyclic Aromatic ◽  
Order Of Magnitude ◽  
Detailed Kinetics ◽  
Soot Model

Stringent emission legislations and growing health concerns have contributed to the evolution of soot modeling in diesel engines from simple empirical relations to methods involving detailed kinetics and complex aerosol dynamics. In this paper, four different soot models have been evaluated for the high temperature, high pressure combusting dodecane spray cases of engine combustion network (ECN) spray A which mimics engine-relevant conditions. The soot models considered include an empirical, a multistep, a method of moments based, and a discrete sectional method soot model. Two experimental cases with ambient oxygen volume of 21% and 15% have been modeled. A good agreement between simulations and experiments for vapor penetration and heat release rate has been obtained. Quasi-steady soot volume fraction contours for the four soot models have been compared with experiments. Contours of the species and source terms involved in soot modeling have also been compared for a better understanding of soot processes. The empirical soot model results in higher magnitude and spread of soot due to a lack of modeling framework for oxidation through OH species. Among the four models studied, the multistep soot model has been observed to provide the most promising agreement with the experimental data in terms of distribution of soot and location of peak soot volume fraction. Due to a two-way coupling of soot models, the detailed models predict an upstream location for soot as compared to the multi-step soot model which is one way coupled. A significant difference (of an order of magnitude) in the concentration of PAH (polycyclic aromatic hydrocarbons) precursor between multistep and detailed soot models has been observed because of precursor consumption due to the coupling of detailed soot models with chemical kinetics. It is recommended that kinetic schemes, especially those concerning PAH, be validated with experimental data with a kinetics-coupled soot model.

scholarly journals Getting to Hope: Perspectives from Patients and Caregivers Living with Chronic Childhood Illness

Children ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 525
Author(s):  
Emily von Scheven ◽  
Bhupinder K. Nahal ◽  
Rosa Kelekian ◽  
Christina Frenzel ◽  
Victoria Vanderpoel ◽  
...  
Keyword(s):  
Conceptual Model ◽  
Research Question ◽  
Young Patients ◽  
Future Research ◽  
Childhood Onset ◽  
Virtual Focus Groups ◽  
Definition Of ◽  
Selection Of ◽  
Chronic Childhood ◽  
Research Studies

Promoting hope was identified in our prior work as the top priority research question among patients and caregivers with diverse childhood-onset chronic conditions. Here, we aimed to construct a conceptual model to guide future research studies of interventions to improve hope. We conducted eight monthly virtual focus groups and one virtual workshop with patients, caregivers, and researchers to explore key constructs to inform the model. Discussions were facilitated by Patient Co-Investigators. Participants developed a definition of hope and identified promotors and inhibitors that influence the experience of hope. We utilized qualitative methods to analyze findings and organize the promotors and inhibitors of hope within three strata of the socio-ecologic framework: structural, interpersonal, and intrapersonal. Participants identified three types of interventions to promote hope: resources, navigation, and activities to promote social connection. The hope conceptual model can be used to inform the selection of interventions to assess in future research studies aimed at improving hope and the specification of outcome measures to include in hope research studies. Inclusion of the health care system in the model provides direction for identifying strategies for improving the system and places responsibility on the system to do better to promote hope among young patients with chronic illness and their caregivers.

scholarly journals Examining and Fine-tuning the Selection of Glycan Compositions with GlyConnect Compozitor

2020 ◽  
Vol 19 (10) ◽  
pp. 1602-1618 ◽  
Author(s):  
Thibault Robin ◽  
Julien Mariethoz ◽  
Frédérique Lisacek
Keyword(s):  
Search Engine ◽  
Posttranslational Modifications ◽  
Search Engines ◽  
Web Application ◽  
Contextual Information ◽  
Fine Tuning ◽  
Data Sources ◽  
Web Interface ◽  
Definition Of ◽  
Selection Of

A key point in achieving accurate intact glycopeptide identification is the definition of the glycan composition file that is used to match experimental with theoretical masses by a glycoproteomics search engine. At present, these files are mainly built from searching the literature and/or querying data sources focused on posttranslational modifications. Most glycoproteomics search engines include a default composition file that is readily used when processing MS data. We introduce here a glycan composition visualizing and comparative tool associated with the GlyConnect database and called GlyConnect Compozitor. It offers a web interface through which the database can be queried to bring out contextual information relative to a set of glycan compositions. The tool takes advantage of compositions being related to one another through shared monosaccharide counts and outputs interactive graphs summarizing information searched in the database. These results provide a guide for selecting or deselecting compositions in a file in order to reflect the context of a study as closely as possible. They also confirm the consistency of a set of compositions based on the content of the GlyConnect database. As part of the tool collection of the Glycomics@ExPASy initiative, Compozitor is hosted at https://glyconnect.expasy.org/compozitor/ where it can be run as a web application. It is also directly accessible from the GlyConnect database.

Quality Assessment of Weldable Steel Mark P355NH from Decompression Chamber Construction for Diving

2012 ◽  
Vol 217-219 ◽  
pp. 2381-2387
Author(s):  
Doru Romulus Pascu ◽  
Radu Alexandru Roşu ◽  
Iuliana Duma ◽  
Horia Daşcău
Keyword(s):  
Test Temperature ◽  
Transverse Direction ◽  
Mechanical Characteristics ◽  
Longitudinal Direction ◽  
Pressure Vessels ◽  
Fine Grained ◽  
Weldable Steel ◽  
Breaking Energy ◽  
Fine Grained Steels ◽  
Selection Of

Non-alloyed P355NH steel according to EN 10028-3:2003 belongs to a group of fine-grained steels for pressure vessels being used in welded construction at decompression chamber for divers. Values of the chemical, structural and mechanical characteristics and steel toughness experimentally determined fit the analyzed steel in P355NH steel group according to EN 10028-3:2003. The toughness of the analyzed steel at the test temperature of -30°C is characterized by high values of fracture energy KV in longitudinal direction between 48 and 86 J and on transverse direction between 17 and 34J. Steel toughness at the test temperature of -30°C required by ABS standard (in Section 4/5.3 and Table 1) provides for breaking energy KV of min. 35J, with ductile fracture surfaces, value that is not respected at some lots of the three batches (A, B, C) of steel. Finally, based on the direct correlation established between HV10 hardness of the fine structure and the toughness it was made a selection of the lots of non-alloy steel P355NH which correspond to ABS norm for welded construction of the decompression chamber for divers

Sign in / Sign up

Export Citation Format

Share Document